unicode normalizing the file input string - javascript

I get a list of files from the file input on a page using javascript and then extract the filename for each file. I need to unicode normalize the filenames client side using javascript. Is this even possible?

There is no normalization function in JavaScript itself. There is generally very little Unicode support in JavaScript except for the character concept itself and case conversions (which are Unicode-aware).
So you would need to use a library. A simple one is http://git.io/unorm which is primarily for server-side JavaScript with Node.js but can be used client-side, too. For example, using it, you would normalize the value of s to Normalization form C using UNorm.normalize('NFC',s).

These days, browsers have a normalize() method on strings. It's not supported by IE however.

Related

I have Xampp installed. In a php file, if I run "error_log("aãa");" it outputs "a\xc3\xa3a". Please help me fix it [duplicate]

I'm setting up a new server and want to support UTF-8 fully in my web application. I have tried this in the past on existing servers and always seem to end up having to fall back to ISO-8859-1.
Where exactly do I need to set the encoding/charsets? I'm aware that I need to configure Apache, MySQL, and PHP to do this — is there some standard checklist I can follow, or perhaps troubleshoot where the mismatches occur?
This is for a new Linux server, running MySQL 5, PHP, 5 and Apache 2.
Data Storage:
Specify the utf8mb4 character set on all tables and text columns in your database. This makes MySQL physically store and retrieve values encoded natively in UTF-8. Note that MySQL will implicitly use utf8mb4 encoding if a utf8mb4_* collation is specified (without any explicit character set).
In older versions of MySQL (< 5.5.3), you'll unfortunately be forced to use simply utf8, which only supports a subset of Unicode characters. I wish I were kidding.
Data Access:
In your application code (e.g. PHP), in whatever DB access method you use, you'll need to set the connection charset to utf8mb4. This way, MySQL does no conversion from its native UTF-8 when it hands data off to your application and vice versa.
Some drivers provide their own mechanism for configuring the connection character set, which both updates its own internal state and informs MySQL of the encoding to be used on the connection—this is usually the preferred approach. In PHP:
If you're using the PDO abstraction layer with PHP ≥ 5.3.6, you can specify charset in the DSN:
$dbh = new PDO('mysql:charset=utf8mb4');
If you're using mysqli, you can call set_charset():
$mysqli->set_charset('utf8mb4'); // object oriented style
mysqli_set_charset($link, 'utf8mb4'); // procedural style
If you're stuck with plain mysql but happen to be running PHP ≥ 5.2.3, you can call mysql_set_charset.
If the driver does not provide its own mechanism for setting the connection character set, you may have to issue a query to tell MySQL how your application expects data on the connection to be encoded: SET NAMES 'utf8mb4'.
The same consideration regarding utf8mb4/utf8 applies as above.
Output:
UTF-8 should be set in the HTTP header, such as Content-Type: text/html; charset=utf-8. You can achieve that either by setting default_charset in php.ini (preferred), or manually using header() function.
If your application transmits text to other systems, they will also need to be informed of the character encoding. With web applications, the browser must be informed of the encoding in which data is sent (through HTTP response headers or HTML metadata).
When encoding the output using json_encode(), add JSON_UNESCAPED_UNICODE as a second parameter.
Input:
Browsers will submit data in the character set specified for the document, hence nothing particular has to be done on the input.
In case you have doubts about request encoding (in case it could be tampered with), you may verify every received string as being valid UTF-8 before you try to store it or use it anywhere. PHP's mb_check_encoding() does the trick, but you have to use it religiously. There's really no way around this, as malicious clients can submit data in whatever encoding they want, and I haven't found a trick to get PHP to do this for you reliably.
Other Code Considerations:
Obviously enough, all files you'll be serving (PHP, HTML, JavaScript, etc.) should be encoded in valid UTF-8.
You need to make sure that every time you process a UTF-8 string, you do so safely. This is, unfortunately, the hard part. You'll probably want to make extensive use of PHP's mbstring extension.
PHP's built-in string operations are not by default UTF-8 safe. There are some things you can safely do with normal PHP string operations (like concatenation), but for most things you should use the equivalent mbstring function.
To know what you're doing (read: not mess it up), you really need to know UTF-8 and how it works on the lowest possible level. Check out any of the links from utf8.com for some good resources to learn everything you need to know.
I'd like to add one thing to chazomaticus' excellent answer:
Don't forget the META tag either (like this, or the HTML4 or XHTML version of it):
<meta charset="utf-8">
That seems trivial, but IE7 has given me problems with that before.
I was doing everything right; the database, database connection and Content-Type HTTP header were all set to UTF-8, and it worked fine in all other browsers, but Internet Explorer still insisted on using the "Western European" encoding.
It turned out the page was missing the META tag. Adding that solved the problem.
Edit:
The W3C actually has a rather large section dedicated to I18N. They have a number of articles related to this issue – describing the HTTP, (X)HTML and CSS side of things:
FAQ: Changing (X)HTML page encoding to UTF-8
Declaring character encodings in HTML
Tutorial: Character sets & encodings in XHTML, HTML and CSS
Setting the HTTP charset parameter
They recommend using both the HTTP header and HTML meta tag (or XML declaration in case of XHTML served as XML).
In addition to setting default_charset in php.ini, you can send the correct charset using header() from within your code, before any output:
header('Content-Type: text/html; charset=utf-8');
Working with Unicode in PHP is easy as long as you realize that most of the string functions don't work with Unicode, and some might mangle strings completely. PHP considers "characters" to be 1 byte long. Sometimes this is okay (for example, explode() only looks for a byte sequence and uses it as a separator -- so it doesn't matter what actual characters you look for). But other times, when the function is actually designed to work on characters, PHP has no idea that your text has multi-byte characters that are found with Unicode.
A good library to check into is phputf8. This rewrites all of the "bad" functions so you can safely work on UTF8 strings. There are extensions like the mb_string extension that try to do this for you, too, but I prefer using the library because it's more portable (but I write mass-market products, so that's important for me). But phputf8 can use mb_string behind the scenes, anyway, to increase performance.
Warning: This answer applies to PHP 5.3.5 and lower. Do not use it for PHP version 5.3.6 (released in March 2011) or later.
Compare with Palec's answer to PDO + MySQL and broken UTF-8 encoding.
I found an issue with someone using PDO and the answer was to use this for the PDO connection string:
$pdo = new PDO(
'mysql:host=mysql.example.com;dbname=example_db',
"username",
"password",
array(PDO::MYSQL_ATTR_INIT_COMMAND => "SET NAMES utf8"));
In my case, I was using mb_split, which uses regular expressions. Therefore I also had to manually make sure the regular expression encoding was UTF-8 by doing mb_regex_encoding('UTF-8');
As a side note, I also discovered by running mb_internal_encoding() that the internal encoding wasn't UTF-8, and I changed that by running mb_internal_encoding("UTF-8");.
First of all, if you are in PHP before 5.3 then no. You've got a ton of problems to tackle.
I am surprised that none has mentioned the intl library, the one that has good support for Unicode, graphemes, string operations, localisation and many more, see below.
I will quote some information about Unicode support in PHP by Elizabeth Smith's slides at PHPBenelux'14
INTL
Good:
Wrapper around ICU library
Standardised locales, set locale per script
Number formatting
Currency formatting
Message formatting (replaces gettext)
Calendars, dates, time zone and time
Transliterator
Spoofchecker
Resource bundles
Convertors
IDN support
Graphemes
Collation
Iterators
Bad:
Does not support zend_multibyte
Does not support HTTP input output conversion
Does not support function overloading
mb_string
Enables zend_multibyte support
Supports transparent HTTP in/out encoding
Provides some wrappers for functionality such as strtoupper
ICONV
Primary for charset conversion
Output buffer handler
mime encoding functionality
conversion
some string helpers (len, substr, strpos, strrpos)
Stream Filter stream_filter_append($fp, 'convert.iconv.ISO-2022-JP/EUC-JP')
DATABASES
MySQL: Charset and collation on tables and on the connection (not the collation). Also, don't use mysql - mysqli or PDO
postgresql: pg_set_client_encoding
sqlite(3): Make sure it was compiled with Unicode and intl support
Some other gotchas
You cannot use Unicode filenames with PHP and windows unless you use a 3rd part extension.
Send everything in ASCII if you are using exec, proc_open and other command line calls
Plain text is not plain text, files have encodings
You can convert files on the fly with the iconv filter
The only thing I would add to these amazing answers is to emphasize on saving your files in UTF-8 encoding, I have noticed that browsers accept this property over setting UTF-8 as your code encoding. Any decent text editor will show you this. For example, Notepad++ has a menu option for file encoding, and it shows you the current encoding and enables you to change it. For all my PHP files I use UTF-8 without a BOM.
Sometime ago I had someone ask me to add UTF-8 support for a PHP and MySQL application designed by someone else. I noticed that all files were encoded in ANSI, so I had to use iconv to convert all files, change the database tables to use the UTF-8 character set and utf8_general_ci collate, add 'SET NAMES utf8' to the database abstraction layer after the connection (if using 5.3.6 or earlier. Otherwise, you have to use charset=utf8 in the connection string) and change string functions to use the PHP multibyte string functions equivalent.
I recently discovered that using strtolower() can cause issues where the data is truncated after a special character.
The solution was to use
mb_strtolower($string, 'UTF-8');
mb_ uses MultiByte. It supports more characters but in general is a little slower.
In PHP, you'll need to either use the multibyte functions, or turn on mbstring.func_overload. That way things like strlen will work if you have characters that take more than one byte.
You'll also need to identify the character set of your responses. You can either use AddDefaultCharset, as above, or write PHP code that returns the header. (Or you can add a META tag to your HTML documents.)
I have just gone through the same issue and found a good solution at PHP manuals.
I changed all my files' encoding to UTF8 and then the default encoding on my connection. This solved all the problems.
if (!$mysqli->set_charset("utf8")) {
printf("Error loading character set utf8: %s\n", $mysqli->error);
} else {
printf("Current character set: %s\n", $mysqli->character_set_name());
}
View Source
Unicode support in PHP is still a huge mess. While it's capable of converting an ISO 8859 string (which it uses internally) to UTF-8, it lacks the capability to work with Unicode strings natively, which means all the string processing functions will mangle and corrupt your strings.
So you have to either use a separate library for proper UTF-8 support, or rewrite all the string handling functions yourself.
The easy part is just specifying the charset in HTTP headers and in the database and such, but none of that matters if your PHP code doesn't output valid UTF-8. That's the hard part, and PHP gives you virtually no help there. (I think PHP 6 is supposed to fix the worst of this, but that's still a while away.)
If you want a MySQL server to decide the character set, and not PHP as a client (old behaviour; preferred, in my opinion), try adding skip-character-set-client-handshake to your my.cnf, under [mysqld], and restart mysql.
This may cause trouble in case you're using anything other than UTF-8.
The top answer is excellent. Here is what I had to on a regular Debian, PHP, and MySQL setup:
// Storage
// Debian. Apparently already UTF-8
// Retrieval
// The MySQL database was stored in UTF-8,
// but apparently PHP was requesting ISO 8859-1. This worked:
// ***notice "utf8", without dash, this is a MySQL encoding***
mysql_set_charset('utf8');
// Delivery
// File *php.ini* did not have a default charset,
// (it was commented out, shared host) and
// no HTTP encoding was specified in the Apache headers.
// This made Apache send out a UTF-8 header
// (and perhaps made PHP actually send out UTF-8)
// ***notice "utf-8", with dash, this is a php encoding***
ini_set('default_charset','utf-8');
// Submission
// This worked in all major browsers once Apache
// was sending out the UTF-8 header. I didn’t add
// the accept-charset attribute.
// Processing
// Changed a few commands in PHP, like substr(),
// to mb_substr()
That was all!

Html data showing � (questions marks) instead of characters [duplicate]

I'm setting up a new server and want to support UTF-8 fully in my web application. I have tried this in the past on existing servers and always seem to end up having to fall back to ISO-8859-1.
Where exactly do I need to set the encoding/charsets? I'm aware that I need to configure Apache, MySQL, and PHP to do this — is there some standard checklist I can follow, or perhaps troubleshoot where the mismatches occur?
This is for a new Linux server, running MySQL 5, PHP, 5 and Apache 2.
Data Storage:
Specify the utf8mb4 character set on all tables and text columns in your database. This makes MySQL physically store and retrieve values encoded natively in UTF-8. Note that MySQL will implicitly use utf8mb4 encoding if a utf8mb4_* collation is specified (without any explicit character set).
In older versions of MySQL (< 5.5.3), you'll unfortunately be forced to use simply utf8, which only supports a subset of Unicode characters. I wish I were kidding.
Data Access:
In your application code (e.g. PHP), in whatever DB access method you use, you'll need to set the connection charset to utf8mb4. This way, MySQL does no conversion from its native UTF-8 when it hands data off to your application and vice versa.
Some drivers provide their own mechanism for configuring the connection character set, which both updates its own internal state and informs MySQL of the encoding to be used on the connection—this is usually the preferred approach. In PHP:
If you're using the PDO abstraction layer with PHP ≥ 5.3.6, you can specify charset in the DSN:
$dbh = new PDO('mysql:charset=utf8mb4');
If you're using mysqli, you can call set_charset():
$mysqli->set_charset('utf8mb4'); // object oriented style
mysqli_set_charset($link, 'utf8mb4'); // procedural style
If you're stuck with plain mysql but happen to be running PHP ≥ 5.2.3, you can call mysql_set_charset.
If the driver does not provide its own mechanism for setting the connection character set, you may have to issue a query to tell MySQL how your application expects data on the connection to be encoded: SET NAMES 'utf8mb4'.
The same consideration regarding utf8mb4/utf8 applies as above.
Output:
UTF-8 should be set in the HTTP header, such as Content-Type: text/html; charset=utf-8. You can achieve that either by setting default_charset in php.ini (preferred), or manually using header() function.
If your application transmits text to other systems, they will also need to be informed of the character encoding. With web applications, the browser must be informed of the encoding in which data is sent (through HTTP response headers or HTML metadata).
When encoding the output using json_encode(), add JSON_UNESCAPED_UNICODE as a second parameter.
Input:
Browsers will submit data in the character set specified for the document, hence nothing particular has to be done on the input.
In case you have doubts about request encoding (in case it could be tampered with), you may verify every received string as being valid UTF-8 before you try to store it or use it anywhere. PHP's mb_check_encoding() does the trick, but you have to use it religiously. There's really no way around this, as malicious clients can submit data in whatever encoding they want, and I haven't found a trick to get PHP to do this for you reliably.
Other Code Considerations:
Obviously enough, all files you'll be serving (PHP, HTML, JavaScript, etc.) should be encoded in valid UTF-8.
You need to make sure that every time you process a UTF-8 string, you do so safely. This is, unfortunately, the hard part. You'll probably want to make extensive use of PHP's mbstring extension.
PHP's built-in string operations are not by default UTF-8 safe. There are some things you can safely do with normal PHP string operations (like concatenation), but for most things you should use the equivalent mbstring function.
To know what you're doing (read: not mess it up), you really need to know UTF-8 and how it works on the lowest possible level. Check out any of the links from utf8.com for some good resources to learn everything you need to know.
I'd like to add one thing to chazomaticus' excellent answer:
Don't forget the META tag either (like this, or the HTML4 or XHTML version of it):
<meta charset="utf-8">
That seems trivial, but IE7 has given me problems with that before.
I was doing everything right; the database, database connection and Content-Type HTTP header were all set to UTF-8, and it worked fine in all other browsers, but Internet Explorer still insisted on using the "Western European" encoding.
It turned out the page was missing the META tag. Adding that solved the problem.
Edit:
The W3C actually has a rather large section dedicated to I18N. They have a number of articles related to this issue – describing the HTTP, (X)HTML and CSS side of things:
FAQ: Changing (X)HTML page encoding to UTF-8
Declaring character encodings in HTML
Tutorial: Character sets & encodings in XHTML, HTML and CSS
Setting the HTTP charset parameter
They recommend using both the HTTP header and HTML meta tag (or XML declaration in case of XHTML served as XML).
In addition to setting default_charset in php.ini, you can send the correct charset using header() from within your code, before any output:
header('Content-Type: text/html; charset=utf-8');
Working with Unicode in PHP is easy as long as you realize that most of the string functions don't work with Unicode, and some might mangle strings completely. PHP considers "characters" to be 1 byte long. Sometimes this is okay (for example, explode() only looks for a byte sequence and uses it as a separator -- so it doesn't matter what actual characters you look for). But other times, when the function is actually designed to work on characters, PHP has no idea that your text has multi-byte characters that are found with Unicode.
A good library to check into is phputf8. This rewrites all of the "bad" functions so you can safely work on UTF8 strings. There are extensions like the mb_string extension that try to do this for you, too, but I prefer using the library because it's more portable (but I write mass-market products, so that's important for me). But phputf8 can use mb_string behind the scenes, anyway, to increase performance.
Warning: This answer applies to PHP 5.3.5 and lower. Do not use it for PHP version 5.3.6 (released in March 2011) or later.
Compare with Palec's answer to PDO + MySQL and broken UTF-8 encoding.
I found an issue with someone using PDO and the answer was to use this for the PDO connection string:
$pdo = new PDO(
'mysql:host=mysql.example.com;dbname=example_db',
"username",
"password",
array(PDO::MYSQL_ATTR_INIT_COMMAND => "SET NAMES utf8"));
In my case, I was using mb_split, which uses regular expressions. Therefore I also had to manually make sure the regular expression encoding was UTF-8 by doing mb_regex_encoding('UTF-8');
As a side note, I also discovered by running mb_internal_encoding() that the internal encoding wasn't UTF-8, and I changed that by running mb_internal_encoding("UTF-8");.
First of all, if you are in PHP before 5.3 then no. You've got a ton of problems to tackle.
I am surprised that none has mentioned the intl library, the one that has good support for Unicode, graphemes, string operations, localisation and many more, see below.
I will quote some information about Unicode support in PHP by Elizabeth Smith's slides at PHPBenelux'14
INTL
Good:
Wrapper around ICU library
Standardised locales, set locale per script
Number formatting
Currency formatting
Message formatting (replaces gettext)
Calendars, dates, time zone and time
Transliterator
Spoofchecker
Resource bundles
Convertors
IDN support
Graphemes
Collation
Iterators
Bad:
Does not support zend_multibyte
Does not support HTTP input output conversion
Does not support function overloading
mb_string
Enables zend_multibyte support
Supports transparent HTTP in/out encoding
Provides some wrappers for functionality such as strtoupper
ICONV
Primary for charset conversion
Output buffer handler
mime encoding functionality
conversion
some string helpers (len, substr, strpos, strrpos)
Stream Filter stream_filter_append($fp, 'convert.iconv.ISO-2022-JP/EUC-JP')
DATABASES
MySQL: Charset and collation on tables and on the connection (not the collation). Also, don't use mysql - mysqli or PDO
postgresql: pg_set_client_encoding
sqlite(3): Make sure it was compiled with Unicode and intl support
Some other gotchas
You cannot use Unicode filenames with PHP and windows unless you use a 3rd part extension.
Send everything in ASCII if you are using exec, proc_open and other command line calls
Plain text is not plain text, files have encodings
You can convert files on the fly with the iconv filter
The only thing I would add to these amazing answers is to emphasize on saving your files in UTF-8 encoding, I have noticed that browsers accept this property over setting UTF-8 as your code encoding. Any decent text editor will show you this. For example, Notepad++ has a menu option for file encoding, and it shows you the current encoding and enables you to change it. For all my PHP files I use UTF-8 without a BOM.
Sometime ago I had someone ask me to add UTF-8 support for a PHP and MySQL application designed by someone else. I noticed that all files were encoded in ANSI, so I had to use iconv to convert all files, change the database tables to use the UTF-8 character set and utf8_general_ci collate, add 'SET NAMES utf8' to the database abstraction layer after the connection (if using 5.3.6 or earlier. Otherwise, you have to use charset=utf8 in the connection string) and change string functions to use the PHP multibyte string functions equivalent.
I recently discovered that using strtolower() can cause issues where the data is truncated after a special character.
The solution was to use
mb_strtolower($string, 'UTF-8');
mb_ uses MultiByte. It supports more characters but in general is a little slower.
In PHP, you'll need to either use the multibyte functions, or turn on mbstring.func_overload. That way things like strlen will work if you have characters that take more than one byte.
You'll also need to identify the character set of your responses. You can either use AddDefaultCharset, as above, or write PHP code that returns the header. (Or you can add a META tag to your HTML documents.)
I have just gone through the same issue and found a good solution at PHP manuals.
I changed all my files' encoding to UTF8 and then the default encoding on my connection. This solved all the problems.
if (!$mysqli->set_charset("utf8")) {
printf("Error loading character set utf8: %s\n", $mysqli->error);
} else {
printf("Current character set: %s\n", $mysqli->character_set_name());
}
View Source
Unicode support in PHP is still a huge mess. While it's capable of converting an ISO 8859 string (which it uses internally) to UTF-8, it lacks the capability to work with Unicode strings natively, which means all the string processing functions will mangle and corrupt your strings.
So you have to either use a separate library for proper UTF-8 support, or rewrite all the string handling functions yourself.
The easy part is just specifying the charset in HTTP headers and in the database and such, but none of that matters if your PHP code doesn't output valid UTF-8. That's the hard part, and PHP gives you virtually no help there. (I think PHP 6 is supposed to fix the worst of this, but that's still a while away.)
If you want a MySQL server to decide the character set, and not PHP as a client (old behaviour; preferred, in my opinion), try adding skip-character-set-client-handshake to your my.cnf, under [mysqld], and restart mysql.
This may cause trouble in case you're using anything other than UTF-8.
The top answer is excellent. Here is what I had to on a regular Debian, PHP, and MySQL setup:
// Storage
// Debian. Apparently already UTF-8
// Retrieval
// The MySQL database was stored in UTF-8,
// but apparently PHP was requesting ISO 8859-1. This worked:
// ***notice "utf8", without dash, this is a MySQL encoding***
mysql_set_charset('utf8');
// Delivery
// File *php.ini* did not have a default charset,
// (it was commented out, shared host) and
// no HTTP encoding was specified in the Apache headers.
// This made Apache send out a UTF-8 header
// (and perhaps made PHP actually send out UTF-8)
// ***notice "utf-8", with dash, this is a php encoding***
ini_set('default_charset','utf-8');
// Submission
// This worked in all major browsers once Apache
// was sending out the UTF-8 header. I didn’t add
// the accept-charset attribute.
// Processing
// Changed a few commands in PHP, like substr(),
// to mb_substr()
That was all!

Need to normalize UTF-8 string encoding to composed characters

So I have some characters like í, ñ, etc. that are percent-encoded in a URL string in an XML document. I need to convert them programmatically from the combining form (e.g. i%CC%81) to their composed UTF-8 character equivalent (%C3%AD in that case).
SO was kind enough to point me to the same question about how to do this in iOS (you can't, you have to create your own lookup table) and C# (apparently you can do this in the general case with built-in functionality in C#).
I need to be able to do it in python 3.x and preferably, JavaScript as well. So far I have tried to unquote/decodeURI the string and then re-encode it back, but apparently the characters are not exactly equivalent because the transforms are lossless (I get back the original starting with either form).
Is there anyway to do this in the general case or do I need to build my own lookup table and replacement functions? Also, here's an example URL:
file:///some/file/path/3-05%20Melodi%CC%81a%20de%20la%20montan%CC%83a%20.m4a
(Obviously I'm unescaping the XML part).
UPDATE
Using Christoph's answer below got me the python solution and enabled me to find this for JavaScript (note that it is an ES 2015 function, has mediocre browser support with no IE and Safari 10 only).
In python3 urllib.quote moved to urllib.parse, but you're actual looking for unicodedata.normalize()
Coming from a default python3 string
import urllib.parse
import unicodedata
s = "î"
print (urllib.parse.quote(s))
> %C3%AE
s = unicodedata.normalize("NFC",s)
print (urllib.parse.quote(s))
> %C3%AD
which looks to me pretty much like the result you're looking for.

how to use unicode character groups in javascript's regexs?

there is a way to use patterns like "\p{L}" in javascript, natively?
(i suppose that is a perl-compatible syntax)
I'm interested firstly in firefox support, and webkit, possibly
No, \p{..} is not supported natively by any of the big browsers. However, it does work in JavaScript if you use the XRegExp library and it's Unicode plugins.
Unfortunately, no. You can only specify a set of characters in the usual syntax, writing characters and ranges in brackets, but this becomes awkward since e.g. letters are scattered all around the Unicode space, with other characters between them.
There’s an inefficient workaround: fetch the UnicodeData.txt file from the Unicode site, put its content inside your JavaScript code as data, and parse it. And then you could have the data e.g. in an array of objects containing the Unicode properties, such as gc (General Category), which tells you whether the character is a letter or not. But even then, you would just have the data handy for simple testing, not as something you can use as a constituent of a regexp.
In theory, you could use the data to construct a regexp... but it would be rather large.
No, Javascript has slightly different syntax. To catch unicode you have to use character selector like \uXXXX. However, on practice if your page and files in UTF-8, setting non-ASCII characters in range [абвг] does work too.
http://www.javascriptkit.com/jsref/regexp.shtml
The library found here:
http://inimino.org/~inimino/blog/javascript_cset
seems to work for me and is fairly small and independent of other libraries.

How to do localizable javascript?

I have a web application that uses TONS of javascript, and as usual, there are a lot of textual constants that will be displayed to the user embedded in the code itself.
What do you think is the best way to make this localizable?
I know I need to take those strings off of the code and replace them with constants, which will be defined into some external place.
For the server side, ASP.Net provides some very neat capabilities for dealing with this.
What's the best to do this in Javascript?
The best idea I have is to have a JS file with ALL the string constants of the JS of the site (i'd have different copies of this, for each language), and then on each page, I include this script first, before all the others.
This seems like the most centralized way, that also wastes the least bandwidth.
Are there any other better approaches?
Thanks!
here's how we did it (in ASP.net), pretty much along the lines of what you've mentioned:
1) Created two javascript files: one which defines all javascript functions/DOM manipulations as required by the site, and, second called Messages.js: this defines all the string literals that need to be localized, something like var ALERT_MSG = "Alert message in english".
2) Created different version of the Messages.js, one for each locale that we are supporting and localized the strings. The localized js files were named using messages.locale.js naming convention (for eg. messages.fr-FR.js).
3) Included the js files within the "ScriptManager" and provided the ResourceUICultures for the Messages.js file: this ensures that the correct localized file is embedded in the html output (if you are not using ASP.net you can build this basic functionality by doing some culture sniffing and including the appropriate js file).
4) Voila!
Your approach makes sense. Details:
I'd have the strings for each language in an object.
localized={"cat":"chat","dog":"chien"};
Then in code:
localized["cat"]
The quotations around of the keys and the array notation (rather than the more common object dot notation) are to avoid collisions with JavaScript reserved words.
There is a gettext library but I haven't used it.
Your approach sounds good enough.
If you have lots of strings and you are concerned about the bulkiness of the file you may want to consider a script that creates a single javascript file for each language by concatenating the code javascript and the locale javascript and then applying something like Minify.
You'll waste some CPU cycles on publishing but you'll save some round trips...
There's a library for localizing JavaScript applications: https://github.com/wikimedia/jquery.i18n
The strings are stored in JSON files, as pretty much everybody else suggests, but it has a few more features:
It can do parameter replacement, supports gender (clever he/she handling), number (clever plural handling, including languages that have more than one plural form), and custom grammar rules that some languages need.
The only requirement is jQuery.

Categories