Force page reload with html anchors (#) - HTML & JS - javascript

Say I'm on a page called /example#myanchor1 where myanchor is an anchor in the page.
I'd like to link to /example#myanchor2, but force the page to reload while doing so.
The reason is that I run js to detect the anchor from the url at the page load.
The problem (normally expected behavior) here though, is that the browser just sends me to that specific anchor on the page without reloading the page.
How would I go about doing so? JS is OK.

I would suggest monitoring the anchor in the URL to avoid a reload, that's pretty much the point of using anchors for control-flow. But still here goes. I'd say the easiest way to force a reload using a simple anchor-link would be to use
where in place of $random insert a random number (assuming "dummy" is not interpreted server side). I'm sure there's a way to reload the page after setting the anchor, but it's probably more difficult then simply reacting to the anchor being set and do the stuff you need at that point.
Then again, if you reload the page this way, you can just put myanchor2 as a query parameter instead, and render your stuff server side.
Edit
Note that the link above will reload in all circumstances, if you only need to reload if you're not already on the page, you need to have the dummy variable be more predictable, like so
I would still recommend just monitoring the hash though.

Simple like that
#hardcore
an example

Another way to do that is to set the url, and use window.location.reload() to force the reload.
<a href="/example#myanchor2"
onclick="setTimeout(location.reload.bind(location), 1)">
</a>
Basically, the setTimeout delays the reload. As there is no return false in the onclick, the href is performed. The url is then changed by the href and only after that is the page reloaded.
No need for jQuery, and it is trivial.

My favorite solution, inspired by another answer is:
myanchor2
href link will not be followed so you can use your own preference, for example: "" or "#".
Even though I like the accepted answer I find this more elegant as it doesn't introduce a foreign parameter. And both #Qwerty's and #Stilltorik's answers were causing the hash to disappear after reload for me.

What's the point of using client-side JS if you're going to keep reloading the page all the time anyways? It might be a better idea to monitor the hash for changes even when the page is not reloading.
This page has a hash monitor library and a jQuery plugin to go with it.
If you really want to reload the page, why not use a query string (?foo) instead of a hash?

Another option that hasn't been mentioned yet is to bind event listeners (using jQuery for example) to the links that you care about (might be all of them, might not be) and get the listener to call whatever function you use.
Edit after comment
For example, you might have this code in your HTML:
example1
example2
example3
Then, you could add the following code to bind and respond to the links:
<script type="text/javascript">
$('a.myHash').click(function(e) {
e.preventDefault(); // Prevent the browser from handling the link normally, this stops the page from jumping around. Remove this line if you do want it to jump to the anchor as normal.
var linkHref = $(this).attr('href'); // Grab the URL from the link
if (linkHref.indexOf("#") != -1) { // Check that there's a # character
var hash = linkHref.substr(linkHref.indexOf("#") + 1); // Assign the hash to a variable (it will contain "myanchor1" etc
myFunctionThatDoesStuffWithTheHash(hash); // Call whatever javascript you use when the page loads and pass the hash to it
alert(hash); // Just for fun.
}
});
</script>
Note that I'm using the jQuery class selector to select the links I want to 'monitor', but you can use whatever selector you want.
Depending on how your existing code works, you may need to either modify how/what you pass to it (perhaps you will need to build a full URL including the new hash and pass that across - eg. http://www.example.com/example#myanchor1), or modify the existing code to accept what you pass to it from you new code.

Here's something like what I did (where "anc" isn't used for anything else):
And onload:
window.onload = function() {
var hash = document.location.hash.substring(1);
if (hash.length == 0) {
var anc = getURLParameter("anc");
if (anc != null) {
hash = document.location.hash = anc;
}
}
}
The getURLParameter function is from here

If you need to reload the page using the same anchor and expect the browser to return to that anchor, it won't. It will return to the user's previous scroll position.
Setting a random anchor, overwriting it and then reloading seems to fix it. Not entirely sure why.
var hash = window.location.hash;
window.location.hash = Math.random();
window.location.hash = hash;
window.location.reload();

Try this its help for me
<a onclick="location.href='link.html'">click me</a>
In your anchor tag instead of
click me

As suggested in another answer, monitoring the hash is also an option. I ended up solving it like this so it required minimal code changes. If I had asked the original question, I believe I would have loved to see this option fully explained.
The added benefit is that it allows for additional code for either of the situations (hash changed or page loaded). It also allows you to call the hash change code manually with a custom hash. I used jQuery because it makes the hash change detection a piece of cake.
Here goes!
Move all the code that fires when a hash is detected into a separate independent function:
function openHash(hash) {
// hashy code goes here
return false; // optional: prevents triggering href for onclick calls
}
Then detect your hash for both scenarios like so:
// page load
$(function () {
if(typeof location.hash != typeof undefined) {
// here you can add additional code to trigger only on page load
openHash(location.hash);
}
});
// hash change
$(window).on('hashchange', function() {
// here you can add additional code to trigger only on hash change
openHash(location.hash);
});
And you can also call the code manually now like
Magic
Hope this helps anyone!

Try this by adding simple question mark:
Going to Anchor2 with Refresh

Related

Link with hash : how to always navigate

On the footer of the website I'm working on, I have links to different pages, and in one case, 2 links to the same page with a different hash in the url ,like this :
<a href="http://example.com/mypage#test>Test</a>
<a href="http://example.com/mypage#test2>Test2</a>
These hashes are not true anchors, they reflect some actions the user takes (namely showing/hiding some content).
If I come from another page, I navigate without any problem. However, if I am already on "mypage", then the hash changes, but nothing happens. The browser detects and anchor change and thus tries to navigate to the anchor.
That's fair enough, but I want my user to be actually redirected to "http://example.com/mypage#test2", as if he copy-pasted it himself in the address bar. How can I achieve that ?
I could use the hashchange event but it would make it complicated to manage the rest of the javascript, so I wonder if there is a simpler way to do it.
You have a very simple solution if you are using jQuery:
$(window).on('hashchange', function() {
//code
});
Check out this: On - window.location.hash - Change?
Also this MDN documentation.
Use the location.hash property of the window object to find out what the anchor is. To detect a change in the hash, with plain javascript, just use the onhashchange event.
window.onhashchange = new function() {
window.location.replace("http://example.com/mypage" + window.location.hash);
});

Reload page when changing hash

Reload page when changing hash.
I have a simple one-page site with several 'pages' on it. These pages are in one wide container which scrolls when you choose one. I have added a hash to the URL so that you can locate to specific pages directly. This just sets the style.left attribute when it matches a hash in a switch statement.
The problem is that when I change the hash value in the URL. For example, changing it from Home.html#Web to Home.html#Photos. When doing this, the page doesn't reload so the Setup function I've created that check for the hash isn't called and the page just remains where it is.
Any ideas for a way to force the page to reload? Or a better solution?
Thanks,
Andy
Don't reload the page. Instead, set up a onhashchange event handler, and adjust the left value from there:
window.onhashchange = function() {
// do stuff
}
Otherwise, why using hash links instead of regular links? In any case, if you really want to reload, just put window.location.reload() inside the onhashchange handler...
I had a JQuery function that fired on $('body').on('click', '.subcategory-link', function () { }); which detected if there was a hash appended to the URL in my case, so I kept that function the same and then just used a force reload whenever a hash change was detected:
below i write the code pls try this one it wrok from me charm.
$(document).ready(function() {
$('body').on('click', '.subcategory-link', function () { var data = $(this).attr('href');
alert($(this).attr('href'));
window.location.reload();
});
});

How to create the breadcrumb and the shifting view effect similar to Github

Clicking a breadcrumb link in github will trigger the directory view area to transition to the subdirectory . What is the best way to achieve this effect. I am using asp.net mvc , jquery, jquery ui, and a jquery layout plugin ( http://layout.jquery-dev.net/ ui layout )
Shoud I abandon the layout plugin ?
Well, you can start by using the unique url pattern. To make this sound a little familiar, let's take for example twitter:
#searching "stackoverflow"
https://twitter.com/#!/search/stackoverflow
the hash part is the one after (and including) "#". using window.location.hash gets it for us. then use string.replace() to remove #!/ and end up with:
search/stackoverflow
then if we store this value as a variable and do string.split('/'), which is split the value per /, we are returned with this:
array = ['search','stackoverflow'];
now it looks more like a breadcrumb which we can use to build. if you were in twitter, it would be more like:
site / search / stackoverflow
and for each breadcrumb link, just append further. if you have segmented urls, it's pretty easy to build the links:
site = mysite.com
site/search = mysite.com/search
site/search/stackoverflow = mysite.com/search/stackoverflow
for the sliding part, you need to pick up the "onhashchange" event which detects the changes to the value of the hash. The event always happens when you click a link that has href="#somevalue" - note the href having "#". you also notice that the page does not go anywhere (that's where AJAX magic comes to play later).
for modern browsers, you can detect hashchange using jQuery or plain JS:
$(window).on('hashchange',function(){
//do whatever you want when the hash changes
});
//or
window.onhashchange = function(){
//do whatever you want when the hash changes
}
for older browsers, you have to set a timer that checks the previous vs current value of the window.location.hash
(function timer(prevHash){
var currentHash = window.location.hash;
if(prevHash !== currentHash){
//do whatever you want when the hash changes
}
setTimeout(function(){
timer(currentHash);
},1000);
}();
the sliding effect can be achieved using jQuery .animate(). you can load the new page via AJAX (depending on the page you determined using the parsed hash), append the loaded page, slide the contents, and boom! you are done. It's pretty easy for everyone to make if they know the gears that make the clock turn.

Using Hashes in URL to Run Script onload

I was wanting to make a link similar to this
www.mysite.com/profile/#openTheme
When the link has the hash "#openTheme" i want it to run a function on the page when the page is loaded.
Is there a way to set an Anchor like this eg:
<a name="openTheme" onActivate="runScript()">
Or is there a better way of doing it? Eg, running a script onload to find any location hashes and using if/else?
Thanks.
You can pick this up using this:
self.document.location.hash
This will return #openTheme in this case. You can then do an if, so...
if(self.document.location.hash == '#openTheme')
{
//do something
}
You can register the window.onhashchange event, which will fire whenever the user types a new hash into the address bar, or a link is clicked that points to a hash on the current page, or JavaScript sets location.href to "#something-or-other".

Activate URL anchor but don't scroll to it?

I have a page with two tabs that I want to be able to switch with Javascript, but also set the anchor (e.g. page.html#tab1) in the URL for bookmarking/linking.
By default the tab contents are in two divs, one below the other, and the anchor tag will scroll to the correct one, with JS disabled.
With JS enabled, CSS classes are applied to make them act as tabs. Each tab links to each anchor, but when you click to switch tabs, the page scrolls to the tab. If I return false from the onclick function then the URL doesn't change to include the anchor.
How do I make the browser URL change to page.html#tab1 but not scroll to #tab1 ??
I've played with this for a while, because I initially didn't believe you (I use the jQuery history plugin to get similar behavior).
And I'm stumped. I don't think you can. What you could do, as a workaround, is use javascript to set the hash to something DIFFERENT from what is actually on the page. And then use javascript upon load to read the hash and populate the correct content. I do this on my site. So in that scenario, users without javascript would be scrolled, users with javascript would keep the history chain, and it only gets wacky when people without send links to people with (or vice-versa).
A quick hack:
var thehash = e.target.hash;
$(thehash).prop('id',thehash.substr(1)+'-noscroll');
window.location.hash = e.target.hash;
$(thehash+'-noscroll').prop('id',thehash.substr(1));
This changes the id of the html element before and after changing the hash of the url. Works for me, but might as well break something. This prevents the browser from scrolling on a hash change, since there is not html element with that id in between.
Could you have some Javascript that changed the anchor names, set window.location.hash, and then changed the anchor names back?
(I've confirmed that andynormancx is right, and setting window.location.hash scrolls the view, but I'm too lazy to test if creating an anchor in the DOM to window.location.hash also scrolls.)
var Namespace = {
var timer, scroll;
}
// Onclick
Namespace.scroll = window.pageYOffset || document.body.scrollTop || document.documentElement.scrollTop;
Namespace.timer = setInterval(function() { scrollTo(0, Namespace.scroll) }, 100);
location.hash = this.href;
clearInterval(Namespace.timer);
I found a nice solution here: http://lea.verou.me/2011/05/change-url-hash-without-page-jump/
Use a preventDefault on for example a click event
$('a').click((event) => {
event.preventDefault();
let hash = $(event.target).attr('href');
history.pushState(null, null, hash);
// The url now has a hash but the page won't jump to the given anchor
// .. handle the rest (an easing scroll for example)
});
window.location.hash = 'tab1';
might work.

Categories