I have an HTML page with 3 tables on it. I want to be able to copy specific cells in a table row to the clipboard. The row could come from any of the 3 tables.
Using the code below, I highlight and copy the row for a table with an ID of "final". How do I make this work for any of the 3 tables? I tried by getElementsByTagName and labeling them the same name but did not work - understandably so. Is there a way to designate the selected table? I am trying to avoid copying the whole row and might eventually add the formatted msg to a new page rather than copy to the clipboard.
function copy_highlight_row() {
var table = document.getElementById('final');
var cells = table.getElementsByTagName('td');
for (var i = 0; i < cells.length; i++) {
// Take each cell
var cell = cells[i];
// do something on onclick event for cell
cell.onclick = function () {
// Get the row id where the cell exists
var rowId = this.parentNode.rowIndex;
var rowsNotSelected = table.getElementsByTagName('tr');
for (var row = 0; row < rowsNotSelected.length; row++) {
rowsNotSelected[row].style.backgroundColor = "";
rowsNotSelected[row].classList.remove('selected');
}
var rowSelected = table.getElementsByTagName('tr')[rowId];
rowSelected.style.backgroundColor = "yellow";
rowSelected.className += " selected";
var cellId = this.cellIndex + 1
msg = 'Title: ' + rowSelected.cells[0].innerHTML;
msg += '\r\nDescription: ' + rowSelected.cells[1].innerHTML;
msg += '\n\nLink: ' + rowSelected.cells[2].innerHTML;
msg += '\nPublication Date: ' + rowSelected.cells[3].innerHTML;
//msg += '\nThe cell value is: ' + this.innerHTML copies cell selected
navigator.clipboard.writeText(msg);
}
}
};
Based on a couple of the suggestions I came up with the following:
function highlight_row() {
var cells = document.querySelectorAll('td')
for (var i = 0; i < cells.length; i++) {
// Take each cell
var cell = cells[i];
// do something on onclick event for cell
cell.onclick = function () {
// Get the row id where the cell exists
var rowId = this.parentNode.rowIndex;
var t_ID = this.closest('table').id
var table=document.getElementById(t_ID);
var rowsNotSelected = table.getElementsByTagName('tr');
for (var row = 0; row < rowsNotSelected.length; row++) {
rowsNotSelected[row].style.backgroundColor = "";
rowsNotSelected[row].classList.remove('selected');
}
var rowSelected = table.getElementsByTagName('tr')[rowId];
rowSelected.style.backgroundColor = "yellow";
rowSelected.className += " selected";
var cellId = this.cellIndex + 1
msg = 'Title: ' + rowSelected.cells[0].innerHTML;
msg += '\r\nDescription: ' + rowSelected.cells[1].innerHTML;
msg += '\n\nLink: ' + rowSelected.cells[2].innerHTML;
msg += '\nPublication Date: ' + rowSelected.cells[3].innerHTML;
navigator.clipboard.writeText(msg);
}
}
}
At the end of the html I call the function. The HTML contains 3 tables and this enabled me to click on any table, highlight the row, and copy the correct range of cells.
The following code works only if the table is already present in the document upon page load. I however want it to apply on a dynamically created table.
Can this be done?
var colNumber=22
for (var i=0; i<colNumber; i++)
{
var thWidth=$("#tbl").find("th:eq("+i+")").width();
var tdWidth=$("#tbl").find("td:eq("+i+")").width();
if (thWidth<tdWidth)
$("#tbl").find("th:eq("+i+")").width(tdWidth);
else
$("#tbl").find("td:eq("+i+")").width(thWidth);
}
The table is created in the following way:
function loadFile(event){
alasql('SELECT * FROM FILE(?,{headers:false})',[event],function(data){
var keys = [];
for (var i = 0; i < data.length; i++) {
for (var categoryid in data[i]) {
var category = data[i][categoryid];
keys.push(categoryid);
}
}
keysConverted = keys.map(foo);
var vMin = Math.min.apply(null, keysConverted);
var vMax = Math.max.apply(null, keysConverted);
var start = vMin-1
var ColNeeded = vMax - vMin+1;
var arrExcel2Table = '<table id="tbl">';
for (var i = 0; i < data.length; i++){
arrExcel2Table = arrExcel2Table + '<tr>';
for (var j = 0; j < ColNeeded; j++){
cellValue = data[i][number2Letter(j+start)];
if (typeof cellValue === "undefined"){
cellValue = '';
}
arrExcel2Table = arrExcel2Table + '<td>' + cellValue + '</td>';
}
arrExcel2Table = arrExcel2Table + '</tr>';
}
arrExcel2Table = arrExcel2Table + '</table>';
document.getElementById('excel_table').innerHTML = arrExcel2Table;
});
}
Create a function you want to run and add an event from the dynamic element. For example
arrExcel2Table = arrExcel2Table + '<td>' + cellValue + '</td>';
can be replaced by
arrExcel2Table = arrExcel2Table + '<td onclick="myFunction();">' + cellValue + '</td>';
Above code will call the function you created
myFunction() {
alert();
}
Just create your table, then apply whatever code you want to it :
$('#excel_table').html(arrExcel2Table);
adjustWidth()
function adjustWidth(){
var $tbl = $("#tbl"); // And cache your jQuery objects!! Massive performance boost
for (var i=0; i<colNumber; i++)
{
var $th = $tbl.find("th:eq("+i+")"),
$td = $tbl.find("td:eq("+i+")"),
thWidth = $th.width(),
tdWidth = $td.width();
if (thWidth<tdWidth)
$th.width(tdWidth);
else
$td.width(thWidth);
}
}
I am trying to display a "leaderboard" table based on JSON data.
I have read a lot about the JSON format and overcome some initial obstacles, but my Javascript knowledge is very limited and I need help!
Basically my JSON data comes through looking like this:
[{"User_Name":"John Doe","score":"10","team":"1"},{"User_Name":"Jane Smith","score":"15","team":"2"},{"User_Name":"Chuck Berry","score":"12","team":"2"}]
What I need is to be able to loop through this array, generating a table row or list item for each object. There will be an unknown amount of total objects in the array but each will have the same format- three values: Name, Score, Team.
So far I have used the following code, which confirms that I am successfully loading the objects in the console-
$.getJSON(url,
function(data){
console.log(data);
});
but I am not sure how to iterate over them, parsing them into the HTML table.
The next step is sorting the entries by score in descending order...
Any help would be much appreciated.
Thanks!
EDIT:
Updated code below, this works:
$.getJSON(url,
function (data) {
var tr;
for (var i = 0; i < data.length; i++) {
tr = $('<tr/>');
tr.append("<td>" + data[i].User_Name + "</td>");
tr.append("<td>" + data[i].score + "</td>");
tr.append("<td>" + data[i].team + "</td>");
$('table').append(tr);
}
});
(The $.parseJSON was not necessary, we can use 'data' as the JSON array is already parsed I believe)
Loop over each object, appending a table row with the relevant data each iteration.
$(document).ready(function () {
$.getJSON(url,
function (json) {
var tr;
for (var i = 0; i < json.length; i++) {
tr = $('<tr/>');
tr.append("<td>" + json[i].User_Name + "</td>");
tr.append("<td>" + json[i].score + "</td>");
tr.append("<td>" + json[i].team + "</td>");
$('table').append(tr);
}
});
});
JSFiddle
You can use simple jQuery jPut plugin
http://plugins.jquery.com/jput/
<script>
$(document).ready(function(){
var json = [{"name": "name1","score":"30"},{"name": "name2","score":"50"}];
//while running this code the template will be appended in your div with json data
$("#tbody").jPut({
jsonData:json,
//ajax_url:"youfile.json", if you want to call from a json file
name:"tbody_template",
});
});
</script>
<div jput="tbody_template">
<tr>
<td>{{name}}</td>
<td>{{score}}</td>
</tr>
</div>
<table>
<tbody id="tbody">
</tbody>
</table>
Loop over each object, push in string array and join them. Append in target table, it is better.
$(document).ready(function () {
$.getJSON(url,
function (json) {
var tr=[];
for (var i = 0; i < json.length; i++) {
tr.push('<tr>');
tr.push("<td>" + json[i].User_Name + "</td>");
tr.push("<td>" + json[i].score + "</td>");
tr.push("<td>" + json[i].team + "</td>");
tr.push('</tr>');
}
$('table').append($(tr.join('')));
});
You can use KnockoutJS with jQuery. KnockoutJS have smart data-binding features. By using the foreach binding feature you can write your code like this example:
HTML:
<table>
<thead>
<tr>
<th>User Name</th>
<th>Score</th>
<th>Team</th>
</tr>
</thead>
<tbody data-bind="foreach: teams">
<tr>
<td data-bind="text: User_Name"></td>
<td data-bind="text: score "></td>
<td data-bind="text: team "></td>
</tr>
</tbody>
</table>
JavaScript:
$(document).ready(function () {
$.getJSON(url,function (json) {
ko.applyBindings({
teams: json
});
}
});
});
Fiddle Demo with your dummy data
Make a HTML Table from a JSON array of Objects by extending $ as shown below
$.makeTable = function (mydata) {
var table = $('<table border=1>');
var tblHeader = "<tr>";
for (var k in mydata[0]) tblHeader += "<th>" + k + "</th>";
tblHeader += "</tr>";
$(tblHeader).appendTo(table);
$.each(mydata, function (index, value) {
var TableRow = "<tr>";
$.each(value, function (key, val) {
TableRow += "<td>" + val + "</td>";
});
TableRow += "</tr>";
$(table).append(TableRow);
});
return ($(table));
};
and use as follows:
var mydata = eval(jdata);
var table = $.makeTable(mydata);
$(table).appendTo("#TableCont");
where TableCont is some div
This one is ugly, but just want to throw there some other options to the mix. This one has no loops. I use it for debugging purposes
var myObject = {a:1,b:2,c:3,d:{a:1,b:2,c:3,e:{a:1}}}
var myStrObj = JSON.stringify(myObject)
var myHtmlTableObj = myStrObj.replace(/{/g,"<table><tr><td>").replace(/:/g,"</td><td>","g").replace(/,/g,"</td></tr><tr><td>","g").replace(/}/g,"</table>")
$('#myDiv').html(myHtmlTableObj)
Example:
var myObject = {a:1,b:2,c:3,d:{a:1,b:2,c:3,e:{a:1}}}
var myStrObj = JSON.stringify(myObject)
var myHtmlTableObj = myStrObj.replace(/\"/g,"").replace(/{/g,"<table><tr><td>").replace(/:/g,"</td><td>","g").replace(/,/g,"</td></tr><tr><td>","g").replace(/}/g,"</table>")
$('#myDiv').html(myHtmlTableObj)
#myDiv table td{background:whitesmoke;border:1px solid lightgray}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
<div id='myDiv'>table goes here</div>
another nice recursive way to generate HTML from a nested JSON object (currently not supporting arrays):
// generate HTML code for an object
var make_table = function(json, css_class='tbl_calss', tabs=1){
// helper to tabulate the HTML tags. will return '\t\t\t' for num_of_tabs=3
var tab = function(num_of_tabs){
var s = '';
for (var i=0; i<num_of_tabs; i++){
s += '\t';
}
//console.log('tabbing done. tabs=' + tabs)
return s;
}
// recursive function that returns a fixed block of <td>......</td>.
var generate_td = function(json){
if (!(typeof(json) == 'object')){
// for primitive data - direct wrap in <td>...</td>
return tab(tabs) + '<td>'+json+'</td>\n';
}else{
// recursive call for objects to open a new sub-table inside the <td>...</td>
// (object[key] may be also an object)
var s = tab(++tabs)+'<td>\n';
s += tab(++tabs)+'<table class="'+css_class+'">\n';
for (var k in json){
s += tab(++tabs)+'<tr>\n';
s += tab(++tabs)+'<td>' + k + '</td>\n';
s += generate_td(json[k]);
s += tab(--tabs)+'</tr>' + tab(--tabs) + '\n';
}
// close the <td>...</td> external block
s += tab(tabs--)+'</table>\n';
s += tab(tabs--)+'</td>\n';
return s;
}
}
// construct the complete HTML code
var html_code = '' ;
html_code += tab(++tabs)+'<table class="'+css_class+'">\n';
html_code += tab(++tabs)+'<tr>\n';
html_code += generate_td(json);
html_code += tab(tabs--)+'</tr>\n';
html_code += tab(tabs--)+'</table>\n';
return html_code;
}
Here are two ways to do the same thing, with or without jQuery:
// jquery way
$(document).ready(function () {
var json = [{"User_Name":"John Doe","score":"10","team":"1"},{"User_Name":"Jane Smith","score":"15","team":"2"},{"User_Name":"Chuck Berry","score":"12","team":"2"}];
var tr;
for (var i = 0; i < json.length; i++) {
tr = $('<tr/>');
tr.append("<td>" + json[i].User_Name + "</td>");
tr.append("<td>" + json[i].score + "</td>");
tr.append("<td>" + json[i].team + "</td>");
$('table').first().append(tr);
}
});
// without jquery
function ready(){
var json = [{"User_Name":"John Doe","score":"10","team":"1"},{"User_Name":"Jane Smith","score":"15","team":"2"},{"User_Name":"Chuck Berry","score":"12","team":"2"}];
const table = document.getElementsByTagName('table')[1];
json.forEach((obj) => {
const row = table.insertRow(-1)
row.innerHTML = `
<td>${obj.User_Name}</td>
<td>${obj.score}</td>
<td>${obj.team}</td>
`;
});
};
if (document.attachEvent ? document.readyState === "complete" : document.readyState !== "loading"){
ready();
} else {
document.addEventListener('DOMContentLoaded', ready);
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<table>
<tr>
<th>User_Name</th>
<th>score</th>
<th>team</th>
</tr>
</table>'
<table>
<tr>
<th>User_Name</th>
<th>score</th>
<th>team</th>
</tr>
</table>
I spent a lot of time developing various reports. So, now I have an idea - create a web framework for building web reports. I have started here:
https://github.com/ColdSIce/ReportUI
Now it is an angular 4 module. You can pass your json data to TableLayoutComponent and get a HTML table as result. Table already has fixed header. Also you can fix some your columns by default or by click. More there, you can customize table properties like background-color, font-color, row-height etc.
If you are interested you can join me in this project and help.
Here is an another way to parse json object into Html table
//EXTRACT VALUE FOR HTML HEADER.
// ('Book ID', 'Book Name', 'Category' and 'Price')
var col = [];
for (var i = 0; i < d.length; i++) {
for (var key in d[i]) {
if (col.indexOf(key) === -1) {
col.push(key);
}
}
}
// CREATE DYNAMIC TABLE.
var table = document.createElement("table");
// CREATE HTML TABLE HEADER ROW USING THE EXTRACTED HEADERS ABOVE.
var tr = table.insertRow(-1); // TABLE ROW.
for (var i = 0; i < col.length; i++) {
var th = document.createElement("th");// TABLE HEADER.
th.innerHTML = col[i];
tr.appendChild(th);
}
// ADD JSON DATA TO THE TABLE AS ROWS.
for (var i = 0; i < d.length; i++) {
tr = table.insertRow(-1);
for (var j = 0; j < col.length; j++) {
var tabCell = tr.insertCell(-1);
tabCell.innerHTML = d[i][col[j]];
}
}
// FINALLY ADD THE NEWLY CREATED TABLE WITH JSON DATA TO A CONTAINER.
var divContainer = document.getElementById("showData");
divContainer.innerHTML = "";
divContainer.appendChild(table);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js"></script>
This code will help a lot
function isObject(data){
var tb = document.createElement("table");
if(data !=null) {
var keyOfobj = Object.keys(data);
var ValOfObj = Object.values(data);
for (var i = 0; i < keyOfobj.length; i++) {
var tr = document.createElement('tr');
var td = document.createElement('td');
var key = document.createTextNode(keyOfobj[i]);
td.appendChild(key);
tr.appendChild(td);
tb.appendChild(tr);
if(typeof(ValOfObj[i]) == "object") {
if(ValOfObj[i] !=null) {
tr.setAttribute("style","font-weight: bold");
isObject(ValOfObj[i]);
} else {
var td = document.createElement('td');
var value = document.createTextNode(ValOfObj[i]);
td.appendChild(value);
tr.appendChild(td);
tb.appendChild(tr);
}
} else {
var td = document.createElement('td');
var value = document.createTextNode(ValOfObj[i]);
td.appendChild(value);
tr.appendChild(td);
tb.appendChild(tr);
}
}
}
}
For those interested in a general solution in plain Vanilla JS. It works independently of the number of columns you have in your json.
const myData = [{"User_Name":"John Doe","score":"10","team":"1"},{"User_Name":"Jane Smith","score":"15","team":"2"},{"User_Name":"Chuck Berry","score":"12","team":"2"}]
const createTable = (json) => {
let table = document.getElementById('js-table')
for (let row of json) {
let newRow = table.insertRow();
for (let cell of Object.values(row)) {
let newCell = newRow.insertCell();
let newText = document.createTextNode(cell);
newCell.appendChild(newText);
}
}
}
createTable(myData)
<table>
<tbody id="js-table">
</tbody>
</table>
This post is very much helpful to all of you
First Parse the json data by using jquery eval parser and then iterarate through jquery each function below is the code sniplet:
var obj = eval("(" + data.d + ")");
alert(obj);
$.each(obj, function (index,Object) {
var Id = Object.Id;
var AptYear = Object.AptYear;
$("#ddlyear").append('<option value=' + Id + '>' + AptYear + '</option>').toString();
});
I am trying to create a table based on user input (actually two or three tables depending on the user input..) using Javascript, I am very much native to PHP and have already got this working in PHP, however i would like the user to be able to see the table before the query it. I found a script on here that partially did what I wanted and have attempted to edit it (I found it surprisingly similar to PHP) Basically it calculates the total amount of cells (ports) splits it by rows and columns, the "super" column is used if the user would like it to be split into multiple tables, which align next to each other, hence the div tag. Here's my JS:
<html>
<head>
<script type="text/javascript">
function createTable()
{
var num_ports = document.getElementById('ports').value;
var num_super = document.getElementById('super').value;
var num_rows = document.getElementById('rows').value;
var num_cols = document.getElementById('cols').value;
var tbody = '';
var colStart = num_cols / num_super;
for( var i=0; i<num_super; i++){
var theader = '<div><table border="1">\n';
for(u=1; u<=num_row; u++){
tbody += '<tr>';
for( var j=0; j<colStart; j++)
{
tbody += '<td>';
tbody += 'Cell ' + i + ',' + j;
tbody += '</td>'
}
tbody += '</tr>\n';
}
var tfooter = '</table></div>';
document.getElementById('wrapper').innerHTML = theader + tbody + tfooter;
}
</script>
</head>
<body>
<form name="tablegen">
<label>Ports: <input type="text" name="ports" id="ports"/></label><br />
<label>Super Columns: <input type="text" name="super" id="super"/></label><br />
<label>Rows: <input type="text" name="rows" id="rows"/></label><br />
<label>Columns: <input type="text" name="cols" id="cols"/></label><br/>
<input name="generate" type="button" value="Create Table!" onclick='createTable();'/>
</form>
<div id="wrapper"></div>
</body>
</html>
Here is what the final output looks like after it has been processed by PHP (ports:24, col:6, rows:2, super:2):
Here is a js fiddle that I threw together:
http://jsfiddle.net/9SnLB/
Currently, when I click the button nothing happens, but, I suppose that is my first issue, but am I going about the setup correctly? Why wont the button run the function?
Two mistakes. One you didn't close the function bracket, ie a missing } at the end. The second is you used $row instead of the variable you created num_rows. For some reason it doesn't work in the fiddle, it does however work locally. The fiddle is saying the createTable function is undefined.
function createTable()
{
var num_ports = document.getElementById('ports').value;
var num_super = document.getElementById('super').value;
var num_rows = document.getElementById('rows').value;
var num_cols = document.getElementById('cols').value;
var tbody = '';
var colStart = num_cols / num_super;
for( var i=0; i<num_super; i++){
var theader = '<div><table border="1">\n';
for($u=1; $u<=num_rows; $u++){
tbody += '<tr>';
for( var j=0; j<colStart; j++)
{
tbody += '<td>';
tbody += 'Cell ' + i + ',' + j;
tbody += '</td>'
}
tbody += '</tr>\n';
}
var tfooter = '</table></div>';
document.getElementById('wrapper').innerHTML = theader + tbody + tfooter;
}
}
var table = [["a1","a2","a3"]["b1","b2","b3"]["c1","c2","c3"]];
for(x = table.length;x > 0;x--) {
document.write("<tr>");
for(y = table[x].length;y > 0;y--) {
document.write("<td>"+y+"</td>");
}
document.write("</tr>");
}
Sorry if the syntax is wrong. You get the idea.
You need to change your jsFiddle framework to "no wrap (head)" and correct errors in the javascript. "no wrap (head)" will allow access the function. The "for ($u=1" loop is missing the close brace and $row should be num_rows. The "for (j=0" loop is missing a semicolon at the last "tbody=".
here's the corrected js.
function createTable() {
var num_ports = document.getElementById('ports').value;
var num_super = document.getElementById('super').value;
var num_rows = document.getElementById('rows').value;
var num_cols = document.getElementById('cols').value;
var tbody = '';
var colStart = num_cols / num_super;
for (var i = 0; i < num_super; i++) {
var theader = '<div><table border="1">\n';
for ($u = 1; $u <= num_rows; $u++) {
tbody += '<tr>';
for (var j = 0; j < colStart; j++) {
tbody += '<td>';
tbody += 'Cell ' + i + ',' + j;
tbody += '</td>';
}
}
tbody += '</tr>\n';
}
var tfooter = '</table></div>';
document.getElementById('wrapper').innerHTML = theader + tbody + tfooter;
}