I have some table.
<table>
<tr>
<td>1</td>
<td><img src="uploads/0/58.gif"></td>
<td>Name 1</td>
<td>8</td>
</tr>
<tr>
<td>2</td>
<td><img src="uploads/0/25.gif"></td>
<td>Name2</td>
<td>5</td>
</tr>
</table>
Need to get src of all images from table. I'm doing some replaces in table, so
var tbl = $('table').html();
After replaces, I need to get src-s:
I really don't know how to write it, like $(tbl + 'tr').each....
So I write:
$('table tr').each(function(index){
let tds = $(this).find('td'); // get array td-s
console.log(typeof(tds.html())) // Object
console.log(tds[1]) // <td><img src="uploads/0/58.gif"></td>
//$('img').src // error
//$('img').getAttribute('src') // error,
//$(this).find('img').src // error
//ets...
});
I try somethink like
or $(this).find('img) // == Object, i can't get src from
You could use a more complete selector:
$('table td > img[src]').each(function(i, e) { });
Or for all images in the page with a source, it would look like this:
$('img[src]').each(function(i, e) { console.log(e.src); });
You might want to read up on CSS selectors :)
A very simple solution based on your tried examples is:
console.log(tds[1].firstChild.src);
To get result inside a loop:
$('table tr').each(function(index){
console.log(tds[1].firstChild.src);
});
Related
I need to get the contents of all the cells in a row, combine them, and put them into a textarea. I think I need the .each() function, like:
$('table tr').each(function() {
$(this).find('td').text().appendTo(textarea); // not right
});
But I don't know how to combine the contents of each cell into one and then put it into the textarea.
Basically, I have a table like this:
<table>
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
</table>
And I want it to end up like this:
<textarea>
1,2,3,4
1,2,3,4
1,2,3,4
</textarea>
http://jsfiddle.net/qy1e7to6/33/
I really appreciate any help you can give. Thank you.
You're very close! For each iteration of the table row, you want to combine the sequence of characters for each cell with a , separator. At the end, you want a line break.
One way we can easily combine the text with a , separator is using an array and then joining the array
var chars = [];
// add characters here...
chars.join(',');
When we append, we can add the new line for the text:
var chars = [];
// iterate each cell and push to array to join later!
$(this).find('td').each(function(){
chars.push($(this).text());
});
// append to text area and join the array
textarea.append(chars.join(','), '\n');
Here's an updated fiddle:
http://jsfiddle.net/qy1e7to6/34/
this code works :
var msg = "";
$('table tr').each(function() {
$(this).find('td').each(function(){
msg += $(this).text() + ",";
});
msg +=" \r\n";
});
$("textarea").val(msg);
fiddler : http://jsfiddle.net/fr5htjyz/1/
you can try with
var content = '';
$('table tr').each(function(idx,elem) {
$(elem).find('tr').each(function(index,element){
content += $(element).text() + ',';
});
content.splice(0,-1);
content + = '\n';
});
$(textarea).val(content);
I have a html table that looks like this...
<table>
<tr>
<th>Date</th>
<th>Pair</th>
<th>Game</th>
<th>Chance</th>
</tr>
<tr>
<td>2014-2-12</td>
<td>Milan-Udinese</td>
<td>1</td>
<td>1.6</td>
</tr>
<tr>
<td>2014-2-13</td>
<td>Juventus-Inter</td>
<td>x</td>
<td>2.5</td>
</tr>
<tr>
<td>2014-2-13</td>
<td>Arsenal-Liverpul</td>
<td>2</td>
<td>2.5</td>
</tr>
</table>
<p>Total number is:MULTIPLICATION OF ALL CHANCE COLUMN TD</p>
all my rows are added dynamically,how do i multiply all chance column td values(numbers)?Do i have to put certain class on chance tds and then get all tds with that class,and loop through and multiply every value then?I'm kinda a newbie so any help would be appreciated.
You can either do something like this:
var tots = 1;
$('tr td:nth-child(4)').each(function(){
tots *= $(this).text();
});
the nth-child(4) is selecting the fourth td in each row, if you want another, just change that number.
or you can give the cells you want to multiple classes, like you said.
example here
If you're using jQuery, the :last-child selector could be helpful.
<p>Total number is: <span id="result"></span></p>
Javascript:
res = 1;
$("tr td:last-child").each(function() {
res *= parseFloat($(this).html());
});
$("#result").html(res);
Have a look to this JSFiddle.
You don't need jQuery to do this. querySelectorAll supports nth-child selector as well.
var derp = document.querySelectorAll("tr td:nth-child(4)");
var total = 1;
var results = [].reduce.call(derp, function (prev, next) {
return prev * ( + next.textContent );
});
Grab the element, and use native Array prototype methods ([]) to iterate the NodeList and return the parsed value of the element, then return the multiplied total.
Here is a fiddle for you.
$(function () {
var chanceTotals = 1;
$("tr td:nth-child(4)").each(function () {
chanceTotals *= parseFloat($(this).html());
});
$("#totals").html("Total number is: " + chanceTotals);
});
Using jQuery, this executes an anonymous function when the document is ready that will do the calculation for you.
You will need to add the id totals to your p element in order for this to work.
Look at this JSFiddle
You really do not need jquery at all to do this. Interacting with the DOM directly may make you write more (browser support), but it can be more efficient than using jQuery (Unnecessary overhead).
As you can see, I restructured your <table>. I could have just grabbed the <tbody> and looped over its children and skipped the whole if <TD> ? check.
DEMO
$(document).ready(function () {
var table = $('#myTable').get(0);
var multiplier = 1;
var col = 3;
for (var row = 0; row < 4; row++) {
var cell = table.rows[row].cells[col];
if (cell.nodeName == 'TD') {
var text = cell.innerText || cell.textContent;
multiplier *= parseFloat(text);
}
}
$('#multiplier').text(multiplier);
});
<table id="myTable">
<thead>
<tr>
<th>Date</th>
<th>Pair</th>
<th>Game</th>
<th>Chance</th>
</tr>
</thead>
<tbody>
<tr>
<td>2014-2-12</td>
<td>Milan-Udinese</td>
<td>1</td>
<td>1.6</td>
</tr>
<tr>
<td>2014-2-13</td>
<td>Juventus-Inter</td>
<td>x</td>
<td>2.5</td>
</tr>
<tr>
<td>2014-2-13</td>
<td>Arsenal-Liverpul</td>
<td>2</td>
<td>2.5</td>
</tr>
</tbody>
</table>
<p>Total number is:
<span id="multiplier">MULTIPLICATION OF ALL CHANCE COLUMN TD</span>
</p>
I'm somewhat new to jQuery and am just wondering how I go about passing in a string value rather than what appears to be a reference to a jQuery item from a selector? I'm having a hard time explaining so here's a sample demo. Don't even know what to title this so please have at editing the title if you can think of a better one.
At the line where I do $("td").filter(function(str){ the str that is passed in becomes an index position of which TD I'm in. So while debugging the first time in it's a 0 the next time a 1 and so on. I tried google but I'm not even sure what to search for, any documentation/code help would be much appreciated
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script>
<script type="text/javascript">
$(document).ready(function(){
$("select[name='showTeam']").change(function () {
$("select[name='showTeam'] option:selected").each(function () {
var str = $(this).val().toLowerCase();
//str = what it was set to up there
//alert(str);
$("td").filter(function(str) {
//str = becomes a number = to position of TD.. ie for 5th TD match STR = 4 (starts at index 0)
return $(this).text().toLowerCase().indexOf(str) != -1;
}).css('background','red');
});
})
});
</script>
Show Team: <select id="showTeam" name="showTeam">
<option>All</option>
<option>Chelsea</option>
</select>
<div id="games">
<table border="1">
<tbody>
<tr>
<th>ID</th>
<th>Game date</th>
<th>Field</th>
<th>Home team</th>
<th>Home team score</th>
<th>Away team</th>
<th>Away team score</th>
<th>Game type</th>
</tr>
<tr class="odd_line" id="game_460">
<td>459</td>
<td>03 Nov 19:00</td>
<td>Field 2</td>
<td>Madrid </td>
<td>3</td>
<td>Bayern Munich </td>
<td>1</td>
<td>Season</td>
</tr>
<tr class="odd_line" id="game_461">
<td>460</td>
<td>03 Nov 19:00</td>
<td>Field 3</td>
<td>chelsea</td>
<td>5</td>
<td>arsenal</td>
<td>4</td>
<td>Season</td>
</tr>
</div>
$(document).ready(function(){
$("#showTeam").change(function () {
var searchFor = $(this).val().toLowerCase();
$("#games table tbody tr td:contains('" + searchFor + "')").parent().css('background','red');
})
});
Demo
Well, yes. The first parameter will refer to the index of the element in the set of matched elements. Just do:
...
$("select[name='showTeam'] option:selected").each(function() {
var str = $(this).val().toLowerCase();
$("td").filter(function() {
return $(this).text().toLowerCase().indexOf(str) != -1;
}).css('background', 'red');
...
since str will already be available within the scope of the filter callback function.
From the docs:
.filter( function(index) )
function(index)A function used as a test for each element in the set.
this is the current DOM element.
$(document).ready(function(){
$("#showTeam").change(function() {
var target = $("#showTeam").val();
$("#games td:contains(" + target + ")").css('background','red');
});
});
I've made a jsfiddle to demonstrate this.
http://jsfiddle.net/Zf5dA/
Notes:
:contains() is case sensitive so I had to make "Chelsea" capitalized in the table.
I simplified the selector on the select element - it has an id, so I selected that. Faster and simpler.
This will find td cells that contain the text, but they can also contain other text. This will get you started.
I'm trying to filter table rows in an intelligent way (as opposed to just tons of code that get the job done eventually) but a rather dry of inspiration.
I have 5 columns in my table. At the top of each there is either a dropdown or a textbox with which the user may filter the table data (basically hide the rows that don't apply)
There are plenty of table filtering plugins for jQuery but none that work quite like this, and thats the complicated part :|
Here is a basic filter example http://jsfiddle.net/urf6P/3/
It uses the jquery selector :contains('some text') and :not(:contains('some text')) to decide if each row should be shown or hidden. This might get you going in a direction.
EDITED to include the HTML and javascript from the jsfiddle:
$(function() {
$('#filter1').change(function() {
$("#table td.col1:contains('" + $(this).val() + "')").parent().show();
$("#table td.col1:not(:contains('" + $(this).val() + "'))").parent().hide();
});
});
Slightly enhancing the accepted solution posted by Jeff Treuting, filtering capability can be extended to make it case insensitive. I take no credit for the original solution or even the enhancement. The idea of enhancement was lifted from a solution posted on a different SO post offered by Highway of Life.
Here it goes:
// Define a custom selector icontains instead of overriding the existing expression contains
// A global js asset file will be a good place to put this code
$.expr[':'].icontains = function(a, i, m) {
return $(a).text().toUpperCase()
.indexOf(m[3].toUpperCase()) >= 0;
};
// Now perform the filtering as suggested by #jeff
$(function() {
$('#filter1').on('keyup', function() { // changed 'change' event to 'keyup'. Add a delay if you prefer
$("#table td.col1:icontains('" + $(this).val() + "')").parent().show(); // Use our new selector icontains
$("#table td.col1:not(:icontains('" + $(this).val() + "'))").parent().hide(); // Use our new selector icontains
});
});
This may not be the best way to do it, and I'm not sure about the performance, but an option would be to tag each column (in each row) with an id starting with a column identifier and then a unique number like a record identifier.
For example, if you had a column Produce Name, and the record ID was 763, I would do something like the following:
<table id="table1">
<thead>
<tr>
<th>Artist</th>
<th>Album</th>
<th>Genre</th>
<th>Price</th>
</tr>
</thead>
<tbody>
<tr>
<td id="artist-127">Red Hot Chili Peppers</td>
<td id="album-195">Californication</td>
<td id="genre-1">Rock</td>
<td id="price-195">$8.99</td>
</tr>
<tr>
<td id="artist-59">Santana</td>
<td id="album-198">Santana Live</td>
<td id="genre-1">Rock</td>
<td id="price-198">$8.99</td>
</tr>
<tr>
<td id="artist-120">Pink Floyd</td>
<td id="album-183">Dark Side Of The Moon</td>
<td id="genre-1">Rock</td>
<td id="price-183">$8.99</td>
</tr>
</tbody>
</table>
You could then use jQuery to filter based on the start of the id.
For example, if you wanted to filter by the Artist column:
var regex = /Hot/;
$('#table1').find('tbody').find('[id^=artist]').each(function() {
if (!regex.test(this.innerHTML)) {
this.parentNode.style.backgroundColor = '#ff0000';
}
});
You can filter specific column by just adding children[column number] to JQuery filter. Normally, JQuery looks for the keyword from all the columns in every row. If we wanted to filter only ColumnB on below table, we need to add childern[1] to filter as in the script below. IndexOf value -1 means search couldn't match. Anything above -1 will make the whole row visible.
ColumnA | ColumnB | ColumnC
John Doe 1968
Jane Doe 1975
Mike Nike 1990
$("#myInput").on("change", function () {
var value = $(this).val().toLowerCase();
$("#myTable tbody tr").filter(function () {
$(this).toggle($(this.children[1]).text().toLowerCase().indexOf(value) > -1)
});
});
step:1 write the following in .html file
<input type="text" id="myInput" onkeyup="myFunction()" placeholder="Search for names..">
<table id="myTable">
<tr class="header">
<th style="width:60%;">Name</th>
<th style="width:40%;">Country</th>
</tr>
<tr>
<td>Alfreds Futterkiste</td>
<td>Germany</td>
</tr>
<tr>
<td>Berglunds snabbkop</td>
<td>Sweden</td>
</tr>
<tr>
<td>Island Trading</td>
<td>UK</td>
</tr>
<tr>
<td>Koniglich Essen</td>
<td>Germany</td>
</tr>
</table>
step:2 write the following in .js file
function myFunction() {
// Declare variables
var input, filter, table, tr, td, i;
input = document.getElementById("myInput");
filter = input.value.toUpperCase();
table = document.getElementById("myTable");
tr = table.getElementsByTagName("tr");
// Loop through all table rows, and hide those who don't match the search query
for (i = 0; i < tr.length; i++) {
td = tr[i].getElementsByTagName("td")[0];
if (td) {
if (td.innerHTML.toUpperCase().indexOf(filter) > -1) {
tr[i].style.display = "";
} else {
tr[i].style.display = "none";
}
}
}
}
I want reorder table rows using JavaScript .
for example take the following dummy table:
<table>
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
<tr>
<td>A</td>
<td>B</td>
<td>C</td>
<td>D</td>
</tr>
<tr>
<td>A1</td>
<td>B1</td>
<td>C1</td>
<td>D1</td>
</tr>
</table>
I want to do this in JavaScript without using jQuery. I want to show the A1,B1,C1,D1.. row as the first row and then 1,2,3,4 row and then A,B,C,D row.
I know that there will be some wait time on the client side but I need to do it in the client side. Is there some generic solution to do this, for any number of rows?
If I understand correctly, you are asking how to take the last row and make it the first row, pushing down the rest. This should do it:
<table id="mytable">
...
</table>
<script type="text/javascript">
var tbl = document.getElementById('mytable');
var rows = tbl.getElementsByTagName('tr');
var firstRow = rows[0];
var lastRow = rows[rows.length];
firstRow.parentNode.insertBefore(lastRow.parentNode.removeChild(lastRow), firstRow);
</script>
Assuming your table does not have nested tables. At which point this would need to be a little smarter. This also assumes you're not using TBODY and THEAD nodes. But I'm sure you can get the idea and enhance it from there.
Do:
var table = ...; // Get reference to table (by ID or other means)
var lastRow = table.rows[table.rows.length - 1];
lastRow.parent.insertBefore(table.rows[0], lastRow);
The best way to solve this in Javascript is:
Give the Tr.. a unique name. for eg: X_Y,X_Z,A_Y,A_Z
Now add a hidden lable or text Box which gives the sorting order from the server i.e When the page renders I want to sort it All the Tr's that have a ID starting with A should come first and All the Z's should come second.
<asp:label id="lblFirstSortOrder" runat="server" style="display:none;">A,X</label>
<asp:label id="lblSecondSortOrder" runat="server" style="display:none;">Z,Y</label>
When the page renders..the order should be A_Z,A_Y,X_Z,X_Y
Before Rendering this is table that comes from the aspx file:
<table>
<tr id='Tr_Heading'>
<td>A</td>
<td>B</td>
</tr>
<tr id="Tr_X_Y">
<td>GH</td>
<td>GH1</td>
</tr>
<tr id="tr_X_Z">
<td>HU</td>
<td>HU1</td>
</tr>
<tr id="tr_A_Z">
<td>JI</td>
<td>JI1</td>
</tr>
<tr id="tr_A_Y">
<td>JI</td>
<td>JI1</td>
</tr>
Script:
function SortAndArrange()
{
var firstList = document.getElementById('lblFirstSortOrder').value;
var secondList = document.getElementById('lblSecondSortOrder').value;
var firstTypes = new Array();
firstTypes = firstList.split(',');
var secondLists = new Array();
secondLists = secondList.split(',');
var refNode = document.getElementById('Tbl_' + firstTypes[0] + "_" + secondTypes[0]);
for (var i = 0; i<firstTypes.length; i++)
{
for (var j = 0; j< secondTypes.length;j++)
{
var TrName = 'Tbl_'+firstTypes[i]+'_'+secondTypes[j];
var FirstSecondTrs = document.getElementById(TrName);
if (FirstSecondTrs)
{
FirstSecondTrs.parentNode.removeChild(FirstSecondTrs);
insertAfter(refNode,FirstSecondTrs);
refNode = FirstSecondTrs;
}
}
}
}
function insertAfter( referenceNode, newNode )
{
referenceNode.parentNode.insertBefore( newNode, referenceNode.nextSibling );
}
I hope you guys get the idea.. for me the sorting order will always come from the server and not from the user of the page...
Thanks a Lot for all the answers.. Apprecite it. Helped me get to this solution.
Thanks,
Ben