I have written some code and in certain places == is required and in others = is required. Can someone explain the differences or point me in the direction of the resource that can?
Example:
if($("#block").css.display == "none"){
$("#block").css.display = "block";
}
The only thing I can come up with is that in one I’m changing and in the other I’m checking. But in both I am referring to equality.
= is the assignment operator. It sets a variable (the left-hand side) to a value (the right-hand side). The result is the value on the right-hand side.
== is the comparison operator. It will only return true if both values are equivalent after coercing their types to the same type.
=== is a more strict comparison operator often called the identity operator. It will only return true if both the type and value of the operands are the same.
I would check out CodeCademy for a quick intro to JavaScript.
If you prefer to read more, MDN is a great intro as well.
For those concerned about the source of the term "identity operator" jbabey pointed out that JavaScript: The Definitive Guide seems to mention it.
= assigns a value to a variable
== checks if the two parameter are equal to each other
=== checks if the two parameters are equal to each other and if their type is the same
! not operator
!= checks if the two parameters are not equal to each other
!== checks if the two parameters are not equal to each other or the type is not the same
one more
> checks if one parameter is greater than the other
>= checks if one parameter is greater than or equal to the other
>== DOESN'T EXIST
etcetera...
== is used to test if the value on the left is equal to the value on the right.
= is used to assign the value on the right to the variable on the left.
In javascript you have also the ===.
= This is for set the value to the variable.
== This is for compare if the value is the same.
=== This is for compare if the value is the same and also the type is the same.
The = operator is an assignment operator. You are assigning an object to a value. The == operator is a conditional equality operation. You are confirming whether two things have equal values. There is also a === operator. This compares not only value, but also type.
Assignment Operators
Comparison Operators
Related
I have written some code and in certain places == is required and in others = is required. Can someone explain the differences or point me in the direction of the resource that can?
Example:
if($("#block").css.display == "none"){
$("#block").css.display = "block";
}
The only thing I can come up with is that in one I’m changing and in the other I’m checking. But in both I am referring to equality.
= is the assignment operator. It sets a variable (the left-hand side) to a value (the right-hand side). The result is the value on the right-hand side.
== is the comparison operator. It will only return true if both values are equivalent after coercing their types to the same type.
=== is a more strict comparison operator often called the identity operator. It will only return true if both the type and value of the operands are the same.
I would check out CodeCademy for a quick intro to JavaScript.
If you prefer to read more, MDN is a great intro as well.
For those concerned about the source of the term "identity operator" jbabey pointed out that JavaScript: The Definitive Guide seems to mention it.
= assigns a value to a variable
== checks if the two parameter are equal to each other
=== checks if the two parameters are equal to each other and if their type is the same
! not operator
!= checks if the two parameters are not equal to each other
!== checks if the two parameters are not equal to each other or the type is not the same
one more
> checks if one parameter is greater than the other
>= checks if one parameter is greater than or equal to the other
>== DOESN'T EXIST
etcetera...
== is used to test if the value on the left is equal to the value on the right.
= is used to assign the value on the right to the variable on the left.
In javascript you have also the ===.
= This is for set the value to the variable.
== This is for compare if the value is the same.
=== This is for compare if the value is the same and also the type is the same.
The = operator is an assignment operator. You are assigning an object to a value. The == operator is a conditional equality operation. You are confirming whether two things have equal values. There is also a === operator. This compares not only value, but also type.
Assignment Operators
Comparison Operators
I have written some code and in certain places == is required and in others = is required. Can someone explain the differences or point me in the direction of the resource that can?
Example:
if($("#block").css.display == "none"){
$("#block").css.display = "block";
}
The only thing I can come up with is that in one I’m changing and in the other I’m checking. But in both I am referring to equality.
= is the assignment operator. It sets a variable (the left-hand side) to a value (the right-hand side). The result is the value on the right-hand side.
== is the comparison operator. It will only return true if both values are equivalent after coercing their types to the same type.
=== is a more strict comparison operator often called the identity operator. It will only return true if both the type and value of the operands are the same.
I would check out CodeCademy for a quick intro to JavaScript.
If you prefer to read more, MDN is a great intro as well.
For those concerned about the source of the term "identity operator" jbabey pointed out that JavaScript: The Definitive Guide seems to mention it.
= assigns a value to a variable
== checks if the two parameter are equal to each other
=== checks if the two parameters are equal to each other and if their type is the same
! not operator
!= checks if the two parameters are not equal to each other
!== checks if the two parameters are not equal to each other or the type is not the same
one more
> checks if one parameter is greater than the other
>= checks if one parameter is greater than or equal to the other
>== DOESN'T EXIST
etcetera...
== is used to test if the value on the left is equal to the value on the right.
= is used to assign the value on the right to the variable on the left.
In javascript you have also the ===.
= This is for set the value to the variable.
== This is for compare if the value is the same.
=== This is for compare if the value is the same and also the type is the same.
The = operator is an assignment operator. You are assigning an object to a value. The == operator is a conditional equality operation. You are confirming whether two things have equal values. There is also a === operator. This compares not only value, but also type.
Assignment Operators
Comparison Operators
I have written some code and in certain places == is required and in others = is required. Can someone explain the differences or point me in the direction of the resource that can?
Example:
if($("#block").css.display == "none"){
$("#block").css.display = "block";
}
The only thing I can come up with is that in one I’m changing and in the other I’m checking. But in both I am referring to equality.
= is the assignment operator. It sets a variable (the left-hand side) to a value (the right-hand side). The result is the value on the right-hand side.
== is the comparison operator. It will only return true if both values are equivalent after coercing their types to the same type.
=== is a more strict comparison operator often called the identity operator. It will only return true if both the type and value of the operands are the same.
I would check out CodeCademy for a quick intro to JavaScript.
If you prefer to read more, MDN is a great intro as well.
For those concerned about the source of the term "identity operator" jbabey pointed out that JavaScript: The Definitive Guide seems to mention it.
= assigns a value to a variable
== checks if the two parameter are equal to each other
=== checks if the two parameters are equal to each other and if their type is the same
! not operator
!= checks if the two parameters are not equal to each other
!== checks if the two parameters are not equal to each other or the type is not the same
one more
> checks if one parameter is greater than the other
>= checks if one parameter is greater than or equal to the other
>== DOESN'T EXIST
etcetera...
== is used to test if the value on the left is equal to the value on the right.
= is used to assign the value on the right to the variable on the left.
In javascript you have also the ===.
= This is for set the value to the variable.
== This is for compare if the value is the same.
=== This is for compare if the value is the same and also the type is the same.
The = operator is an assignment operator. You are assigning an object to a value. The == operator is a conditional equality operation. You are confirming whether two things have equal values. There is also a === operator. This compares not only value, but also type.
Assignment Operators
Comparison Operators
I'm having a hard time understanding the difference between the comparison and logical "not" operators in Javascript. And I am confused about the syntax as well. My questions are:
Since they are both boolean operators, are there any real differences between the two?
And is the syntax for both like this?
x! = 5
Any explanation appreciated - please post examples if you can.
Comparison: take two values and compare them. We could ask various questions, for example:
are these two values "the same", we use == for that
is this value bigger than that value, >
is this value bigger than or equal to that, >=
The result of each of this is a boolean value. So we could write:
boolean areTheyEqual = ( x == y );
So aretheyEqual would be "true" if x was equal to y. Now suppose you wanted a variable "areTheyDifferent". We could get that in two ways, either using the "not" operator, which works on a boolean value:
boolean areTheyDifferent = ! areTheyEqual;
or we could use the "notEqual" comparison
boolean areTheyDifferent = ( x != y );
So the ! operator takes a boolean value and "inverts" it. You need to read the
!=
as a single comparison operator, just like >= is a single operator.
Comparison operators are used in logical statements to determine equality or difference between variables or values.
eg x!=y
Logical operators are used to determine the logic between variables or values.
eg !(x==y)
How to check if javascript variable exist, empty, array, (array but empty), undefined, object and so on
As mentioned in the title, I need a general overview how to check javascript variables in several cases without returning any error causing the browser to stop processing the pageload.
(now I have several issues in this topic.
For example IE stops with error in case _os is undefined, other browsers doesnt:
var _os = fbuser.orders;
var o =0;
var _ret = false;
for (var i = 0; i < _os.length; i++){
...
Furthermore i also need a guide of the proper using operators like == , ===.
As mentioned in the title, I need a general overview how to check
javascript variables in several cases without returning any error
causing the browser to stop processing the pageload.
To check whether or not variables is there, you can simply use typeof:
if (typeof _os != 'undefined'){
// your code
}
The typeof will also help you avoid var undefined error when checking that way.
Furthermore i also need a guide of the proper using operators like ==
, ===.
Both are equality operators. First one does loose comparison to check for values while latter not only checks value but also type of operands being compared.
Here is an example:
4 == "4" // true
4 === "4" // false because types are different eg number and string
With == javascript does type cohersion automatically. When you are sure about type and value of both operands, always use strict equality operator eg ===.
Generally, using typeof is problematic, you should ONLY use it to check whether or not a variables is present.
Read More at MDN:
https://developer.mozilla.org/en/JavaScript/Reference/Operators/typeof
The typeof operator is very helpful here:
typeof asdf
// "undefined"
Perhaps you want something like this in your case:
// Handle cases where `fbuser.orders` is not an array:
var _os = fbuser.orders || []