I'm sending the following JSON string to my server.
(
{
id = 1;
name = foo;
},
{
id = 2;
name = bar;
}
)
On the server I have this.
app.post('/', function(request, response) {
console.log("Got response: " + response.statusCode);
response.on('data', function(chunk) {
queryResponse+=chunk;
console.log('data');
});
response.on('end', function(){
console.log('end');
});
});
When I send the string, it shows that I got a 200 response, but those other two methods never run. Why is that?
I think you're conflating the use of the response object with that of the request.
The response object is for sending the HTTP response back to the calling client, whereas you are wanting to access the body of the request. See this answer which provides some guidance.
If you are using valid JSON and are POSTing it with Content-Type: application/json, then you can use the bodyParser middleware to parse the request body and place the result in request.body of your route.
Update for Express 4.16+
Starting with release 4.16.0, a new express.json() middleware is available.
var express = require('express');
var app = express();
app.use(express.json());
app.post('/', function(request, response){
console.log(request.body); // your JSON
response.send(request.body); // echo the result back
});
app.listen(3000);
Updated for Express 4.0 - 4.15
Body parser was split out into its own npm package after v4, requires a separate install npm install body-parser
var express = require('express')
, bodyParser = require('body-parser');
var app = express();
app.use(bodyParser.json());
app.post('/', function(request, response){
console.log(request.body); // your JSON
response.send(request.body); // echo the result back
});
app.listen(3000);
For earlier versions of Express (< 4)
var express = require('express')
, app = express.createServer();
app.use(express.bodyParser());
app.post('/', function(request, response){
console.log(request.body); // your JSON
response.send(request.body); // echo the result back
});
app.listen(3000);
Test along the lines of:
$ curl -d '{"MyKey":"My Value"}' -H "Content-Type: application/json" http://127.0.0.1:3000/
{"MyKey":"My Value"}
For Express v4+
install body-parser from the npm.
$ npm install body-parser
https://www.npmjs.org/package/body-parser#installation
var express = require('express')
var bodyParser = require('body-parser')
var app = express()
// parse application/json
app.use(bodyParser.json())
app.use(function (req, res, next) {
console.log(req.body) // populated!
next()
})
For those getting an empty object in req.body
I had forgotten to set
headers: {"Content-Type": "application/json"}
in the request. Changing it solved the problem.
#Daniel Thompson mentions that he had forgotten to add {"Content-Type": "application/json"} in the request. He was able to change the request, however, changing requests is not always possible (we are working on the server here).
In my case I needed to force content-type: text/plain to be parsed as json.
If you cannot change the content-type of the request, try using the following code:
app.use(express.json({type: '*/*'}));
Instead of using express.json() globally, I prefer to apply it only where needed, for instance in a POST request:
app.post('/mypost', express.json({type: '*/*'}), (req, res) => {
// echo json
res.json(req.body);
});
const express = require('express');
let app = express();
app.use(express.json());
This app.use(express.json) will now let you read the incoming post JSON object
Sometimes you don't need third party libraries to parse JSON from text.
Sometimes all you need it the following JS command, try it first:
const res_data = JSON.parse(body);
A beginner's mistake...i was using app.use(express.json()); in a local module instead of the main file (entry point).
In Node Js, on the entry file e.g. index.js, How can I get requested data either as Form-data or Form-URL-encoded or Raw JSON data in middleware?
In my project, I am handling various API request,
Few requests contain file type so requesting as form-data.
Few requests do not contain file type so requests are coming as Form-URL-encoded.
Now the main problem is before routing, I need a specific field from req.body in the middleware.
But I am getting req.body as undefined.
For reference here is my index.js file:
const express = require('express');
const app = express();
app.use(express.raw());
app.use(express.urlencoded({ extended: false }));
app.use((req, res, next) => {
const routes_handler = require('./routes/index.js')(app, express, req);
next();
})
app.listen(3000, () => {
console.log("Server running at Port " + 3000);
});
and the routes/index.js file as follows:
module.exports = function (app, express, req) {
console.log(req.body);
//I need here data of req.body for all requests type (form data, URL-encoded, raw JSON)
app.post('/', function (req, res) {
console.log("Here I can get the requested body easily", req.body)
res.send('Hello World');
});
app.post('*', function (req, res) {
res.send({
code: 0,
message: 'No Content',
status_code: 204,
data: {
error: 'API not found!'
}
});
});
}
Also, I know for file type data, POSTMAN will send the request as Form-data, not as Form-url-encoded. So which I should choose Formidable or Multer?
The way you get all the data in index.js is by creating middlewares for your application, every time any routes that go into your application will be passed through this middleware.
Middleware functions are functions that have access to the request object (req), the response object (res), and the next function in the application’s request-response cycle. The next function is a function in the Express router which, when invoked, executes the middleware succeeding the current middleware.
The below middleware will simply listen to all routes & adds up request time to request time, here goes the code
let express = require('express')
let app = express()
let bodyParser = require("body-parser")
app.use(bodyParser.json())
let requestTime = function (req, res, next) { // simply updating add the requestBody using the middleware
req.requestTime = Date.now();
req.json_body = req.body;
next()
}
app.use(requestTime) // requestTime is the middleware here
app.get('/', function (req, res) {
var responseText = 'Hello World!<br>'
responseText += '<small>Requested at: ' + req.requestTime + '</small>'
res.send(responseText)
})
app.listen(3000)
Few things to note here
Always add interceptor above all routes
Don't forget to add next() inside the middleware, else it will not go to the next route.
Now, coming to the second part of your question which is accessing body,formdata, etc
You can use body-parser npm module to achieve that, something like this
Starting from Express 4, body-parser comes inbuilt with it, so you can try out something
app.use(express.json());
app.use(
bodyParser.urlencoded({
extended: false
})
);
Now, the last bit, you don't need Multer for formdata, but for file upload like multipart/form-data you will need this. Both are good in their own ways, I would go for Multer.
Hope this will help you :)
I believe the body-parser module is your answer.
https://www.npmjs.com/package/body-parser
Add the following line before the routes in your index.js after installing the body-parser package.
app.use(bodyParser.json())
Here is my simple form:
<form id="loginformA" action="userlogin" method="post">
<div>
<label for="email">Email: </label>
<input type="text" id="email" name="email"></input>
</div>
<input type="submit" value="Submit"></input>
</form>
Here is my Express.js/Node.js code:
app.post('/userlogin', function(sReq, sRes){
var email = sReq.query.email.;
}
I tried sReq.query.email or sReq.query['email'] or sReq.params['email'], etc. None of them work. They all return undefined.
When I change to a Get call, it works, so .. any idea?
Things have changed once again starting Express 4.16.0, you can now use express.json() and express.urlencoded() just like in Express 3.0.
This was different starting Express 4.0 to 4.15:
$ npm install --save body-parser
and then:
var bodyParser = require('body-parser')
app.use( bodyParser.json() ); // to support JSON-encoded bodies
app.use(bodyParser.urlencoded({ // to support URL-encoded bodies
extended: true
}));
The rest is like in Express 3.0:
Firstly you need to add some middleware to parse the post data of the body.
Add one or both of the following lines of code:
app.use(express.json()); // to support JSON-encoded bodies
app.use(express.urlencoded()); // to support URL-encoded bodies
Then, in your handler, use the req.body object:
// assuming POST: name=foo&color=red <-- URL encoding
//
// or POST: {"name":"foo","color":"red"} <-- JSON encoding
app.post('/test-page', function(req, res) {
var name = req.body.name,
color = req.body.color;
// ...
});
Note that the use of express.bodyParser() is not recommended.
app.use(express.bodyParser());
...is equivalent to:
app.use(express.json());
app.use(express.urlencoded());
app.use(express.multipart());
Security concerns exist with express.multipart(), and so it is better to explicitly add support for the specific encoding type(s) you require. If you do need multipart encoding (to support uploading files for example) then you should read this.
Security concern using express.bodyParser()
While all the other answers currently recommend using the express.bodyParser() middleware, this is actually a wrapper around the express.json(), express.urlencoded(), and express.multipart() middlewares (http://expressjs.com/api.html#bodyParser). The parsing of form request bodies is done by the express.urlencoded() middleware and is all that you need to expose your form data on req.body object.
Due to a security concern with how express.multipart()/connect.multipart() creates temporary files for all uploaded files (and are not garbage collected), it is now recommended not to use the express.bodyParser() wrapper but instead use only the middlewares you need.
Note: connect.bodyParser() will soon be updated to only include urlencoded and json when Connect 3.0 is released (which Express extends).
So in short, instead of ...
app.use(express.bodyParser());
...you should use
app.use(express.urlencoded());
app.use(express.json()); // if needed
and if/when you need to handle multipart forms (file uploads), use a third party library or middleware such as multiparty, busboy, dicer, etc.
Note: this answer is for Express 2. See here for Express 3.
If you're using connect/express, you should use the bodyParser middleware: It's described in the Expressjs guide.
// example using express.js:
var express = require('express')
, app = express.createServer();
app.use(express.bodyParser());
app.post('/', function(req, res){
var email = req.param('email', null); // second parameter is default
});
Here's the original connect-only version:
// example using just connect
var connect = require('connect');
var url = require('url');
var qs = require('qs');
var server = connect(
connect.bodyParser(),
connect.router(function(app) {
app.post('/userlogin', function(req, res) {
// the bodyParser puts the parsed request in req.body.
var parsedUrl = qs.parse(url.parse(req.url).query);
var email = parsedUrl.email || req.body.email;;
});
})
);
Both the querystring and body are parsed using Rails-style parameter handling (qs) rather than the low-level querystring library. In order to parse repeated parameters with qs, the parameter needs to have brackets: name[]=val1&name[]=val2. It also supports nested maps. In addition to parsing HTML form submissions, the bodyParser can parse JSON requests automatically.
Edit: I read up on express.js and modified my answer to be more natural to users of Express.
This will do it if you want to build the posted query without middleware:
app.post("/register/",function(req,res){
var bodyStr = '';
req.on("data",function(chunk){
bodyStr += chunk.toString();
});
req.on("end",function(){
res.send(bodyStr);
});
});
That will send this to the browser
email=emailval&password1=pass1val&password2=pass2val
It's probably better to use middleware though so you don't have to write this over and over in each route.
Note for Express 4 users:
If you try and put app.use(express.bodyParser()); into your app, you'll get the following error when you try to start your Express server:
Error: Most middleware (like bodyParser) is no longer bundled with Express and must be installed separately. Please see https://github.com/senchalabs/connect#middleware.
You'll have to install the package body-parser separately from npm, then use something like the following (example taken from the GitHub page):
var express = require('express');
var bodyParser = require('body-parser');
var app = express();
app.use(bodyParser());
app.use(function (req, res, next) {
console.log(req.body) // populated!
next();
})
Given some form:
<form action='/somepath' method='post'>
<input type='text' name='name'></input>
</form>
Using express
app.post('/somepath', function(req, res) {
console.log(JSON.stringify(req.body));
console.log('req.body.name', req.body['name']);
});
Output:
{"name":"x","description":"x"}
req.param.name x
Backend:
import express from 'express';
import bodyParser from 'body-parser';
const app = express();
app.use(bodyParser.json()); // add a middleware (so that express can parse request.body's json)
app.post('/api/courses', (request, response) => {
response.json(request.body);
});
Frontend:
fetch("/api/courses", {
method: 'POST',
body: JSON.stringify({ hi: 'hello' }), // convert Js object to a string
headers: new Headers({ "Content-Type": "application/json" }) // add headers
});
app.use(express.bodyParser());
Then for app.post request you can get post values via req.body.{post request variable}.
Update for Express 4.4.1
Middleware of the following is removed from Express.
bodyParser
json
urlencoded
multipart
When you use the middleware directly like you did in express 3.0. You will get the following error:
Error: Most middleware (like urlencoded) is no longer bundled with Express and
must be installed separately.
In order to utilize those middleware, now you need to do npm for each middleware separately.
Since bodyParser is marked as deprecated, so I recommend the following way using json, urlencode and multipart parser like formidable, connect-multiparty. (Multipart middleware is deprecated as well).
Also remember, just defining urlencode + json, the form data will not be parsed and req.body will be undefined. You need to define a middleware handle the multipart request.
var urlencode = require('urlencode');
var json = require('json-middleware');
var multipart = require('connect-multiparty');
var multipartMiddleware = multipart();
app.use(json);
app.use(urlencode);
app.use('/url/that/accepts/form-data', multipartMiddleware);
Update
As of Express version 4.16+, their own body-parser implementation is now included in the default Express package so there is no need for you to download another dependency.
You may have added a line to your code that looks like the following:
app.use(bodyparser.json()); //utilizes the body-parser package
If you are using Express 4.16+ you can now replace that line with:
app.use(express.json()); //Used to parse JSON bodies
This should not introduce any breaking changes into your applications since the code in express.json() is based on bodyparser.json().
If you also have the following code in your environment:
app.use(bodyParser.urlencoded({extended: true}));
You can replace that with:
app.use(express.urlencoded()); //Parse URL-encoded bodies
A final note of caution: There are still some very specific cases where body-parser might still be necessary but for the most part Express’ implementation of body-parser is all you will need for the majority of use cases.
(See the docs at expressjs/bodyparser for more details).
I was searching for this exact problem. I was following all the advice above but req.body was still returning an empty object {}. In my case, it was something just as simple as the html being incorrect.
In your form's html, make sure you use the 'name' attribute in your input tags, not just 'id'. Otherwise, nothing is parsed.
<input id='foo' type='text' value='1'/> // req = {}
<input id='foo' type='text' name='foo' value='1' /> // req = {foo:1}
My idiot mistake is your benefit.
For Express 4.1 and above
As most of the answers are using to Express, bodyParser, connect; where multipart is deprecated. There is a secure way to send post multipart objects easily.
Multer can be used as replacement for connect.multipart().
To install the package
$ npm install multer
Load it in your app:
var multer = require('multer');
And then, add it in the middleware stack along with the other form parsing middleware.
app.use(express.json());
app.use(express.urlencoded());
app.use(multer({ dest: './uploads/' }));
connect.json() handles application/json
connect.urlencoded() handles application/x-www-form-urlencoded
multer() handles multipart/form-data
You shoudn't use app.use(express.bodyParser()). BodyParser is a union of json + urlencoded + mulitpart. You shoudn't use this because multipart will be removed in connect 3.0.
To resolve that, you can do this:
app.use(express.json());
app.use(express.urlencoded());
It´s very important know that app.use(app.router) should be used after the json and urlencoded, otherwise it does not work!
Express v4.17.0
app.use(express.urlencoded( {extended: true} ))
app.post('/userlogin', (req, res) => {
console.log(req.body) // object
var email = req.body.email;
}
express.urlencoded
Demo Form
Another Answer Related
Written at Express version 4.16
Inside the router function you can use req.body property to access the post variable. For example if this was the POST route of your form, it would send back what you input:
function(req,res){
res.send(req.body);
//req.body.email would correspond with the HTML <input name="email"/>
}
P.S. for those who are familiar with PHP: In order to access PHP's $_GET variable we use req.query and to access PHP's $_POST variable we use req.body in Node.js.
Request streaming worked for me
req.on('end', function() {
var paramstring = postdata.split("&");
});
var postdata = "";
req.on('data', function(postdataChunk){
postdata += postdataChunk;
});
I could find all parameters by using following code for both POST and GET requests.
var express = require('express');
var app = express();
const util = require('util');
app.post('/', function (req, res) {
console.log("Got a POST request for the homepage");
res.send(util.inspect(req.query,false,null));
})
from official doc version 4
const express = require('express')
const app = express()
app.use(express.json());
app.use(express.urlencoded({ extended: true }))
app.post('/push/send', (request, response) => {
console.log(request.body)
})
var express = require("express");
var bodyParser = require("body-parser");
var app = express();
app.use(bodyParser.urlencoded({ extended: false }));
app.use(bodyParser.json());
app.get('/',function(req,res){
res.sendfile("index.html");
});
app.post('/login',function(req,res){
var user_name=req.body.user;
var password=req.body.password;
console.log("User name = "+user_name+", password is "+password);
res.end("yes");
});
app.listen(3000,function(){
console.log("Started on PORT 3000");
})
Post Parameters can be retrieved as follows:
app.post('/api/v1/test',Testfunction);
http.createServer(app).listen(port, function(){
console.log("Express server listening on port " + port)
});
function Testfunction(request,response,next) {
console.log(request.param("val1"));
response.send('HI');
}
Use express-fileupload package:
var app = require('express')();
var http = require('http').Server(app);
const fileUpload = require('express-fileupload')
app.use(fileUpload());
app.post('/', function(req, res) {
var email = req.body.email;
res.send('<h1>Email :</h1> '+email);
});
http.listen(3000, function(){
console.log('Running Port:3000');
});
You are using req.query.post with wrong method req.query.post works with method=get, method=post works with body-parser.
Just try this by changing post to get :
<form id="loginformA" action="userlogin" method="get">
<div>
<label for="email">Email: </label>
<input type="text" id="email" name="email"></input>
</div>
<input type="submit" value="Submit"></input>
</form>
And in express code use 'app.get'
Other answers talk about the middleware to use on the server side. My answer attempt to provide developers with a simple playbook to debug the problem themselves.
In this question, the situation is:
You have a form on the client side
The data is sent by clicking on Submit button and you don't use JavaScript to send requests (so no fetch, axios, xhr,... but we can extend the solution for these cases later)
You use Express for the server side
You cannot access data in your Express code. req.body is undefined
There are some actions that you can do to find the solution by yourself:
Open the Network tab and search for your request.
Check the request header Content-Type. In this situation (form submit), the header is likely application/x-www-form-urlencoded or multipart/form-data if you send a file (with enctype="multipart/form-data" in the form tag)
Now check your Express code if you use the appropriate middleware to parse incoming requests.
If your Content-Type is application/x-www-form-urlencoded then you should have app.use(express.urlencoded({extended: true})) in your code.
If your Content-Type is multipart/form-data: because Express doesn't have a built-in middleware to parse this kind of request, you should another library for that. multer is a good one.
If you have done all the steps above, now you can access data in req.body :). If you have problems with the syntax, you should check the Express document page. The syntax could be changed because this question is posted a long time ago.
Now, we can extend this simple playbook for other cases that involve JavaScript code. The key is to check the request Content-Type. If you see application/json then you should use app.use(express.json()) in your code.
In summary, find your request Content-Type, then use the appropriate middleware to parse it.
when you are using POST method in HTML forms, you need to catch the data from req.body in the server side i.e. Node.js.
and also add
var bodyParser = require('body-parser')
app.use( bodyParser.json() );
app.use(bodyParser.urlencoded({extended: false}));
OR
use method='GET' in HTML and and catch the data by req.query in the server side i.e. Node.js