I am building a pomodoro tracker in order to practice a little bit of JavaScript. It's been a while since I started this project. After this particulary problem which is implement a pause/continue functionality I abandoned the project. I really got stucked. I know programming is not easy and I will be facing many problems in the future but I really can't figure out how to solve this task. I am feeling stupid
Here is the JavaScript code:
// General Variables
let display = document.querySelector('.display');
// is the timer paused?
// let isPaused = true;
// let count = 0;
//const playPomodoro = document.querySelector('.play');
const pause = document.querySelector('.pause');
const resume = document.querySelector('.resume');
const stopPomodoro = document.querySelector('.stop');
const pomodoro = document.querySelector('#pomodoro');
const shortBreak = document.querySelector('#shortbreak');
const longBreak = document.querySelector('#longbreak')
const audioBeep = document.querySelector('#audioBeep');
const twentyFiveMinutes = 60 * 25;
const fiveMinutes = 60 * 5;
const thirtyMinutes = 60 * 30;
// Start Pomodoro timer 25 minutes
pomodoro.addEventListener('click', () => {
startTimer(twentyFiveMinutes, display);
stopClick(shortBreak, longBreak);
pause.style.display = 'block';
stopPomodoro.style.display = 'block';
});
// Start Pomodoro short break
shortBreak.addEventListener('click', () => {
startTimer(fiveMinutes, display);
stopClick(pomodoro, longBreak);
pause.style.display = 'block';
stopPomodoro.style.display = 'block';
});
// Start Pomodoro Long break
longBreak.addEventListener('click', () => {
startTimer(thirtyMinutes, display);
stopClick(pomodoro, shortBreak);
pause.style.display = 'block';
stopPomodoro.style.display = 'block';
});
// Stopping Clicks Events
function stopClick(btn1, btn2) {
btn1.classList.add('avoid-clicks');
btn2.classList.add('avoid-clicks');
}
// Remove .avoid-clicks class
function removeAvoidClick(btn1, btn2, btn3) {
btn1.classList.remove('avoid-clicks');
btn2.classList.remove('avoid-clicks');
btn3.classList.remove('avoid-clicks');
}
// main start timer function
function startTimer(duration, display) {
let timer = duration, min, sec;
let countingDown = setInterval(function() {
min = parseInt(timer / 60, 10);
sec = parseInt(timer % 60, 10);
min = min < 10 ? "0" + min : min;
sec = sec < 10 ? "0" + sec : sec;
display.innerHTML = min + ":" + sec;
if (--timer < 0) {
timer = duration;
}
// stops the counting variable when it hits zero
if (timer == 0) {
clearInterval(countingDown);
display.innerHTML = "00:00";
audioBeep.play();
removeAvoidClick(pomodoro,shortBreak,longBreak);
}
// Pause the clock
pause.addEventListener('click', () => {
});
// Stop the counter and set it to 00:00 when the user clicks the stop button
stopPomodoro.addEventListener('click', () => {
clearInterval(countingDown);
display.innerHTML = "00:00";
removeAvoidClick(pomodoro,shortBreak,longBreak);
});
}, 1000);
}
I will store the timer status in an object, then you activate a timer that decreses the current time left and call UI update.
let timer = {
timeLeft: 0,
running: 0,
};
function startTimer(duration) {
timer.timeLeft = duration;
if (!timer.run) {
timer.run = true;
run();
}
}
function run() {
if (timer.run) {
timer.timeLeft -= 1;
setTimeout(run, 1000)
}
}
function pauseTimer() {
timer.run = false;
}
function resumeTimer() {
if (!timer.run) {
timer.run = true;
run();
}
update();
}
function update() {
// everything you need to update in the UI from the timer object
}
Related
I have a working stopwatch. When I click start button the stopwatch is starting and when I click pause button the stopwatch is paused. What I would like is when I refresh my browser to keep the current time of the stopwatch and continue from there with the same functionality. Or when I echo the stopwatch time from a database to continue from the exact time it was before is saved it.
let showTime = document.querySelector("#output");
let startTimeButton = document.querySelector("#start")
let pauseTimeButton = document.querySelector("#pause")
pauseTimeButton.style.display = "none";
let seconds = 0;
let interval = null;
const timer = () => {
seconds++;
// Get hours
let hours = Math.floor(seconds / 3600);
// Get minutes
let minutes = Math.floor((seconds - hours * 3600) / 60);
// Get seconds
let secs = Math.floor(seconds % 60);
if (hours < 10) {
hours = `0${hours}`;
}
if (minutes < 10) {
minutes = `0${minutes}`;
}
if (secs < 10) {
secs = `0${secs}`;
}
showTime.innerHTML = `${hours}:${minutes}:${secs}`;
};
startTimeButton.addEventListener("click", () => {
pauseTimeButton.style.display = "block";
startTimeButton.style.display = "none";
console.log("START TIME CLICKED");
if (interval) {
return;
}
interval = setInterval(timer, 1000);
});
// Pause function
pauseTimeButton.addEventListener("click", () => {
pauseTimeButton.style.display = "none";
startTimeButton.style.display = "block";
console.log("PAUSE TIME CLICKED");
clearInterval(interval);
interval = null;
});
<button id="start">Start</button>
<button id="pause">Pause</button>
<div id="output"></div>
You could use localStorage.
In order to save each second passed you could modify your timer function to save to localStorage:
let seconds = 0;
if (localStorage.getItem("stopwatchSeconds") != null) {
seconds = parseInt(localStorage.getItem("stopwatchSeconds"));
}
//...
const timer = () => {
//...
seconds++;
localStorage.setItem("stopwatchSeconds", seconds);
//...
};
//...
I hope this helps.
It seems like what you're looking for is localStorage. You store your stopwatch data, such as startAt, totalSeconds in the storage and when you refresh the page you can restore your stopwatch state based on the saved data: remainingTime = (startAt + totalSeconds) - currentTime
localStorage docs: https://developer.mozilla.org/en-US/docs/Learn/JavaScript/Client-side_web_APIs/Client-side_storage#storing_simple_data_%E2%80%94_web_storage
I have a JavaScript stopwatch here, I require the start-stop button to keep the same time when continuing.
Currently, if I stop and continue the clock diff is something ridiculous such as '-19330839:-3:-53'
Can anyone explain how this is fixed?
I have various method stopwatches made; however I would rather use real date time instead of a counter, this is because (I have tested after being made aware of this) that counters are very inaccurate over a period of time.
Any help is much appreciated.
html:
Please ignore the reset button for now. I will configure this later.
<input id="startstopbutton" class="buttonZ" style="width: 120px;" type="button" name="btn" value="Start" onclick="startstop();">
<input id="resetbutton" class="buttonZ" style="width: 120px;" type="button" name="btnRst1" id='btnRst1' value="Reset" onclick="resetclock();"/>
<div id="outputt" class="timerClock" value="00:00:00">00:00:00</div>
JS:
const outputElement = document.getElementById("outputt");
var startTime = 0;
var running = false;
var splitcounter = 0;
function startstop() {
if (running == false) {
running = true;
startTime = new Date(sessionStorage.getItem("time"))
if (isNaN(startTime)) startTime = Date.now();
startstopbutton.value = 'Stop';
document.getElementById("outputt").style.backgroundColor = "#2DB37B";
updateTimer();
} else {
running = false;
logTime();
startstopbutton.value = 'Start';
document.getElementById("outputt").style.backgroundColor = "#B3321B";
}
}
function updateTimer() {
if (running == true) {
let differenceInMillis = Date.now() - startTime;
sessionStorage.setItem("time", differenceInMillis)
let {
hours,
minutes,
seconds
} = calculateTime(differenceInMillis);
let timeStr = `${pad(hours)}:${pad(minutes)}:${pad(seconds)}`;
outputElement.innerText = timeStr;
requestAnimationFrame(updateTimer);
}
}
function calculateTime(milliS) {
const SECONDS = 1000; // should be 1000 - only 10 to speed up the timer
const MINUTES = 60;
const HOURS = 60;
const RESET = 60;
let hours = Math.floor(milliS / SECONDS / MINUTES / HOURS);
let minutes = Math.floor(milliS / SECONDS / MINUTES) % RESET;
let seconds = Math.floor(milliS / SECONDS) % RESET;
return {
hours,
minutes,
seconds
};
}
function pad(time) {
return time.toString().padStart(2, '0');
}
I just need the timer to continue on from where it was stopped at.
Issue with your code:
You start with initial value for sessionStorage as Date.now but then save difference on update.
You interact a lot with session storage. Any communication with external API is expensive. Instead use local variables and find an event to initialise values.
Time difference logic is a bit off.
Date.now - startTime does not considers the difference between stop action and start action.
You can use this logic: If startTime is defined, calculate difference and add it to start time. If not, initialise it to Date.now()
Suggestions:
Instead of adding styles, use classes. That will help you in reset functionality
Define small features and based on it, define small functions. That would make reusability easy
Try to make functions independent by passing arguments and only rely on them. That way you'll reduce side-effect
Note: as SO does not allow access to Session Storage, I have removed all the related code.
const outputElement = document.getElementById("outputt");
var running = false;
var splitcounter = 0;
var lastTime = 0;
var startTime = 0;
function logTime() {
console.log('Time: ', lastTime)
}
function resetclock() {
running = false;
startTime = 0;
printTime(Date.now())
applyStyles(true)
}
function applyStyles(isReset) {
startstopbutton.value = running ? 'Stop' : 'Start';
document.getElementById("outputt").classList.remove('red', 'green')
if (!isReset) {
document.getElementById("outputt").classList.add(running ? 'red' : 'green')
}
}
function startstop() {
running = !running;
applyStyles();
if (running) {
if (startTime) {
const diff = Date.now() - lastTime;
startTime = startTime + diff;
} else {
startTime = Date.now()
}
updateTimer(startTime);
} else {
lastTime = Date.now()
logTime();
}
}
function printTime(startTime) {
let differenceInMillis = Date.now() - startTime;
let {
hours,
minutes,
seconds
} = calculateTime(differenceInMillis);
let timeStr = `${pad(hours)}:${pad(minutes)}:${pad(seconds)}`;
outputElement.innerText = timeStr;
}
function updateTimer(startTime) {
if (running == true) {
printTime(startTime)
requestAnimationFrame(() => updateTimer(startTime));
}
}
function calculateTime(milliS) {
const SECONDS = 1000; // should be 1000 - only 10 to speed up the timer
const MINUTES = 60;
const HOURS = 60;
const RESET = 60;
let hours = Math.floor(milliS / SECONDS / MINUTES / HOURS);
let minutes = Math.floor(milliS / SECONDS / MINUTES) % RESET;
let seconds = Math.floor(milliS / SECONDS) % RESET;
return {
hours,
minutes,
seconds
};
}
function pad(time) {
return time.toString().padStart(2, '0');
}
.red {
background-color: #2DB37B
}
.green {
background-color: #B3321B
}
<input id="startstopbutton" class="buttonZ" style="width: 120px;" type="button" name="btn" value="Start" onclick="startstop();">
<input id="resetbutton" class="buttonZ" style="width: 120px;" type="button" name="btnRst1" id='btnRst1' value="Reset" onclick="resetclock();" />
<div id="outputt" class="timerClock" value="00:00:00">00:00:00</div>
simple stopwatch example
<!DOCTYPE html>
<html>
<head>
<title></title>
</head>
<body>
<input class="startstop" style="width: 120px;" type="button" value="Start" onclick="startstop();">
<input class="reset" style="width: 120px;" type="button" value="Reset" onclick="reset();"/>
<div class="timerClock" value="00:00:00">00:00:00</div>
<script type="text/javascript">
var second = 0
var minute = 0
var hour = 0
var interval
var status = false
var element = document.querySelector('.startstop')
var clock = document.querySelector('.timerClock')
var string = ''
function startstop()
{
if(status == 'false')
{
element.value = 'Stop'
clock.style.backgroundColor = "#2DB37B";
status = true
interval = setInterval(function()
{
string = ''
second += 1
if(second >= 60)
{
minute += 1
second = 0
}
if(minute >= 60)
{
hour += 1
minute = 0
}
if(hour < 10)
string += `0${hour}:`
else
string += `${hour}:`
if(minute < 10)
string += `0${minute}:`
else
string += `${minute}:`
if(second < 10)
string += `0${second}`
else
string += `${second}`
clock.innerHTML = string
},1000)
}
else
{
clock.style.backgroundColor = "#B3321B";
element.value = 'Start'
status = false
clearInterval(interval)
}
}
function reset()
{
second = 0
minute = 0
hour = 0
status = false
element.value = 'Start'
clearInterval(interval)
clock.innerHTML = `00:00:00`
clock.style.backgroundColor = "transparent";
}
</script>
</body>
</html>
One thing to know about requestAnimationFrame is that it returns an integer that is a reference to the next animation. You can use this to cancel the next waiting animation with cancelAnimationFrame.
As mentioned by #Rajesh, you shouldn't store the time each update, as it will stop the current process for a (very) short while. Better in that case to fire an event, preferably each second, that will wait until it can run. I haven't updated the code to take that into account, I only commented it away for now.
It's also better to use classes than updating element styles. I wrote sloppy code that overwrites all classes on the #outputt element (it's spelled "output"). That's bad programming, because it makes it impossible to add other classes, but it serves the purpose for now. #Rajesh code is better written for this purpose.
I added two variables - diffTime and animationId. The first one corrects startTime if the user pauses. The second one keeps track if there is an ongoing timer animation.
I refactored your style updates into a method of its own. You should check it out, because it defines standard values and then changes them with an if statement. It's less code than having to type document.getElementById("outputt").style... on different rows.
I also added a resetclock method.
const outputElement = document.getElementById("outputt");
var startTime = 0;
var diffTime = 0;
var animationId = 0;
function startstop() {
const PAUSED = 0;
let paused = animationId == PAUSED;
//diffTime = new Date(sessionStorage.getItem("time")) || 0;
startTime = Date.now() - diffTime;
if (paused) {
updateTimer();
} else {
cancelAnimationFrame(animationId);
animationId = PAUSED;
}
updateTimerClass(paused);
}
function updateTimerClass(paused) {
var outputClass = 'red';
var buttonText = 'Start';
if (paused) {
outputClass = 'green';
buttonText = 'Stop';
}
startstopbutton.value = buttonText;
outputElement.classList = outputClass;
}
function updateTimer() {
let differenceInMillis = Date.now() - startTime;
//sessionStorage.setItem("time", differenceInMillis)
let {
hours,
minutes,
seconds
} = calculateTime(differenceInMillis);
let timeStr = `${pad(hours)}:${pad(minutes)}:${pad(seconds)}`;
outputElement.innerText = timeStr;
diffTime = differenceInMillis;
animationId = requestAnimationFrame(updateTimer);
}
function calculateTime(milliS) {
const SECONDS = 1000; // should be 1000 - only 10 to speed up the timer
const MINUTES = 60;
const HOURS = 60;
const RESET = 60;
let hours = Math.floor(milliS / SECONDS / MINUTES / HOURS);
let minutes = Math.floor(milliS / SECONDS / MINUTES) % RESET;
let seconds = Math.floor(milliS / SECONDS) % RESET;
return {
hours,
minutes,
seconds
};
}
function pad(time) {
return time.toString().padStart(2, '0');
}
function resetclock() {
let paused = animationId == 0;
startTime = Date.now();
diffTime = 0;
if (paused) {
const REMOVE_ALL_CLASSES = '';
outputElement.className = REMOVE_ALL_CLASSES;
outputElement.innerText = '00:00:00';
}
}
#outputt.green {
background-color: #2DB37B;
}
#outputt.red {
background-color: #B3321B;
}
<input id="startstopbutton" class="buttonZ" style="width: 120px;" type="button" name="btn" value="Start" onclick="startstop();">
<input id="resetbutton" class="buttonZ" style="width: 120px;" type="button" name="btnRst1" id='btnRst1' value="Reset" onclick="resetclock();"/>
<div id="outputt" class="timerClock" value="00:00:00">00:00:00</div>
class Stopwatch {
constructor(display, results) {
this.running = false;
this.display = display;
this.results = results;
this.laps = [];
this.reset();
this.print(this.times);
}
reset() {
this.times = [ 0, 0, 0 ];
}
click(){
var x=document.getElementById('ctrl');
if(x.value=="start"){
this.start();
x.value="stop";
document.getElementById("outputt").style.backgroundColor = "#2DB37B";
}
else{
x.value="start";
this.stop();
document.getElementById("outputt").style.backgroundColor = "#B3321B";
}
}
start() {
if (!this.time) this.time = performance.now();
if (!this.running) {
this.running = true;
requestAnimationFrame(this.step.bind(this));
}
}
stop() {
this.running = false;
this.time = null;
}
resets() {
document.getElementById("outputt").style.backgroundColor = "#2DB37B";
if (!this.time) this.time = performance.now();
if (!this.running) {
this.running = true;
requestAnimationFrame(this.step.bind(this));
}
this.reset();
}
step(timestamp) {
if (!this.running) return;
this.calculate(timestamp);
this.time = timestamp;
this.print();
requestAnimationFrame(this.step.bind(this));
}
calculate(timestamp) {
var diff = timestamp - this.time;
// Hundredths of a second are 100 ms
this.times[2] += diff / 1000;
// Seconds are 100 hundredths of a second
if (this.times[2] >= 100) {
this.times[1] += 1;
this.times[2] -= 100;
}
// Minutes are 60 seconds
if (this.times[1] >= 60) {
this.times[0] += 1;
this.times[1] -= 60;
}
}
print() {
this.display.innerText = this.format(this.times);
}
format(times) {
return `\
${pad0(times[0], 2)}:\
${pad0(times[1], 2)}:\
${pad0(Math.floor(times[2]), 2)}`;
}
}
function pad0(value, count) {
var result = value.toString();
for (; result.length < count; --count)
result = '0' + result;
return result;
}
function clearChildren(node) {
while (node.lastChild)
node.removeChild(node.lastChild);
}
let stopwatch = new Stopwatch(
document.querySelector('.stopwatch'),
document.querySelector('.results'));
<input type="button" id="ctrl" value="start" onClick="stopwatch.click();">
<input type="button" value="Reset" onClick="stopwatch.resets();">
<div id="outputt" class="stopwatch"></div>
I have made a countdown but now I want to make a input field with how many minutes the countdown should countdown from. What I have is a pretty basic countdown but what I don't have is that a user puts the amount of minutes into the input field, click the button, and it counts down the minutes. And I hope someone can help me with this.
This is what I got so far:
(()=> {
let countdownEnded = false;
start(3600); // seconds
})();
function start(inputTime){
let startTime = Date.now();
intervalSeconds = setInterval(() => {
let currentTime = Date.now() - startTime;
if(inputTime < 1) {
stop();
} else {
updateDisplay(inputTime, currentTime);
updateMillis();
}
}, 1000);
}
function stop(){
let countDivElement = document.getElementById("countdown"); /*** Updated***/
countDivElement.innerHTML = 'countdown done';
countdownEnded = true; /*** Updated***/
}
function updateDisplay(seconds, currentTime){
let timeIncrement = Math.floor(currentTime / 1000);
updateTime(seconds - timeIncrement);
}
/**
* #method - updatesecondsond
* #summary - This updates the timer every seconds
*/
function updateTime(seconds) {
let countDivElement = document.getElementById("timer");
let minutes = Math.floor(seconds / 60);
let remainingSeconds = seconds % 60;
if (remainingSeconds < 10) {
remainingSeconds = '0' + remainingSeconds;
}
if (minutes < 10) {
minutes = '0' + minutes;
}
if (seconds > 0) {
seconds = seconds - 1;
} else {
clearInterval(intervalSeconds);
countdownEnded = true;
countDivElement.innerHTML = 'countdown done';
return null;
}
countDivElement.innerHTML = minutes + ":" + remainingSeconds + ":" ;
};
function updateMillis() {
let countMillsElement = document.getElementById('millis');
let counterMillis = 99;
let millis;
let intervalMillis = setInterval(()=> {
if(counterMillis === 1) {
counterMillis = 99;
} else {
millis = counterMillis < 10 ? '0' + counterMillis : counterMillis;
};
countMillsElement.innerHTML = millis;
counterMillis --;
}, 10);
if(countdownEnded) {
stop(); /*** Updated***/
return clearInterval(intervalMillis);
}
};
<div class="clock" id="model3">
<div id="countdown"> <!-- Updated -->
<span id="timer"></span><span id="millis"></span>
</div>
</div>
<input id="minutes" placeholder="0:00"/>
I think this may help you.
Change the following
<input id="minutes" placeholder="00"/> <button onclick="startTimer()">Start</button>
And in javascript add a new function
function startTimer(){
var x=document.getElementById("minutes").value * 60; //To Change into Seconds
start(x);
}
And remove the start function
Just add a button with click event that takes input value and triggers your 'start' function with that value as parameter. Something like this:
document.getElementById("startBtn").addEventListener("click", startTimer);
function startTimer() {
var numberOfMinutes = Number(document.getElementById("minutes").value) * 60;
start(numberOfMinutes);
}
And remove 'start' function call from the window load to prevent the timer to start immidiately.
Result is something like this:
https://jsfiddle.net/scarabs/6patc9mo/1/
I'm a beginner in JavaScript, I wrote a countdown timer, but I don't know how to convert the mins into hours. I think its not to hard, but I can't do it, whenever I wrote new rows its not working. Here is my code:
var minutesRemaining;
var secondsRemaining;
var intervalHandle;
function resetPage() {
document.getElementById('inputArea').style.display = 'block';
//hide pause button by default
document.getElementById("pauseArea").style.display = "none";
//hide resume button
document.getElementById("resumeArea").style.display = "none";
}
function resumeCountdown() {
tick();
intervalHandle = setInterval(tick, 1000);
//hide resume button when resuming
document.getElementById("resumeArea").style.display = "none";
//show resume button;
document.getElementById("pauseArea").style.display = "block";
return;
}
function pauseCountdown() {
clearInterval(intervalHandle);
document.getElementById("pauseArea").style.display = "none";
document.getElementById("resumeArea").style.display = "block";
return;
}
function tick() {
//grab h1
var timeDisplay = document.getElementById('time');
//turn seconds into mm:55
var min = Math.floor(secondsRemaining / 60);
var sec = secondsRemaining - (min * 60);
//add leading 0 if seconds less than 10
if (sec < 10) {
sec = '0' + sec;
}
//concatenate with colon
var message = min.toString() + ':' + sec;
// now change the display
timeDisplay.innerHTML = message;
//stop if down to zero
if (secondsRemaining === 0) {
alert('Done!');
clearInterval(intervalHandle);
resetPage();
}
// subtract from seconds remaining
secondsRemaining--;
}
function startCountdown() {
//get contents
var minutes = document.getElementById('minutes').value;
//check if not a number
if (isNaN(minutes)) {
alert("Please enter a number!");
return;
}
//how many seconds?
secondsRemaining = minutes * 60;
//call tick
intervalHandle = setInterval(tick, 1000);
//hide form
document.getElementById('inputArea').style.display = 'none';
//show pause when running
document.getElementById("pauseArea").style.display = "block";
}
window.onload = function () {
// create text input
var inputMinutes = document.createElement('input');
inputMinutes.setAttribute('id', 'minutes');
inputMinutes.setAttribute('type', 'text');
inputMinutes.setAttribute('placeholder', 'Idő megadása');
//pause button
var pauseButton = document.getElementById("pauseBtn");
pauseButton.onclick = function() {
pauseCountdown();
};
//resume button
var resumeButton = document.getElementById("resumeBtn");
resumeButton.onclick = function() {
resumeCountdown();
};
//create button
var startButton = document.createElement('input');
startButton.setAttribute('type', 'button');
startButton.setAttribute('value', 'Indítás');
startButton.onclick = function () {
startCountdown();
};
// add to DOM
document.getElementById('inputArea').appendChild(inputMinutes);
document.getElementById('inputArea').appendChild(startButton);
document.getElementById("pauseArea").appendChild(pauseButton);
document.getElementById("resumeArea").appendChild(resumeButton);
//hide pause button by default
document.getElementById("pauseArea").style.display = "none";
//hide pause button by default
document.getElementById("resumeArea").style.display = "none";
};
Here is what i just wrote really quick. It may help you. But you can just do some basic math to get your conversions and handle the remainder. Like so:
function countDown(future_date_in_millis) {
var date = new Date();
var current_time = date.getTime();
//get the future date and time
var future_date = future_date_in_millis.getTime(); //1438077258047; //date.getTime();
// get the duration in milliseconds
// 1 day = 86400000 millis
var duration = future_date - current_time;
var dd = Math.floor(duration / 86400000);
var remainder = duration % 86400000;
var hh = Math.floor(remainder / 3600000);
remainder = remainder % 3600000;
var mm = Math.floor(remainder / 60000);
remainder = remainder % 60000;
var ss = Math.floor(remainder / 1000);
var days = document.getElementById("dd");
var hours = document.getElementById("hh");
var minutes = document.getElementById("mm");
var seconds = document.getElementById("ss");
days.innerHTML = dd.toString();
hours.innerHTML = hh.toString();
minutes.innerHTML = mm.toString();
seconds.innerHTML = ss.toString();
}
window.setInterval(function () {
/// call your function here
var d = new Date("July 15, 2015 4:52:00 PM");
countDown(d);
}, 1000);
I have this code:
var hour = parseInt(js_arr[j].substring(0, 1));
var min = parseInt(js_arr[j].substring(3, 4));
var seconds = parseInt(js_arr[j].substring(6, 7));
var mil_sec = parseInt(js_arr[j].substring(9, 11));
var time = (hour * 3600000) + (min * 60000) + (seconds * 1000) + mil_sec;
function timeout() {
setTimeout(function () {
if (true) {
document.getElementById('subs').innerHTML = js_arr[i];
i = i + 4;
j = j + 4;
hour = parseInt(js_arr[j].substring(0, 1));
min = parseInt(js_arr[j].substring(3, 4));
seconds = parseInt(js_arr[j].substring(6, 7));
mil_sec = parseInt(js_arr[j].substring(9, 11));
time = (hour * 3600000) + (min * 60000) + (seconds * 1000) + mil_sec;
timeout();
} else {
timeout();
}
}, time);
}
Before javascript code I have an onclick="timeout(); button.
This button allows subtitles to play. What I would also like it to do is to stop these subtitles from playing by clicking on that same button. It would be great if someone could help!
Thanks a lot.
Add a variable that indicates whether the timeout is active. In the timeout()-function, this variable is checked and another loop is only initiated when it is true. To Start and Stop you simply set (and call timeout()) or reset the variable.
var hour = parseInt(js_arr[j].substring(0,1));
var min = parseInt(js_arr[j].substring(3,4));
var seconds = parseInt(js_arr[j].substring(6,7));
var mil_sec = parseInt(js_arr[j].substring(9,11));
var time = (hour*3600000)+(min*60000)+(seconds*1000)+mil_sec;
var timeOutRunning = false;
function startTimeOut() {
timeOutRunning = true;
timeout();
}
function stopTimeOut() {
timeOutRunning = false;
}
function timeout() {
if(timeOutRunning) {
setTimeout(function() {
document.getElementById('subs').innerHTML = js_arr[i];
i=i+4;
j=j+4;
hour = parseInt(js_arr[j].substring(0,1));
min = parseInt(js_arr[j].substring(3,4));
seconds = parseInt(js_arr[j].substring(6,7));
mil_sec = parseInt(js_arr[j].substring(9,11));
time = (hour*3600000)+(min*60000)+(seconds*1000)+mil_sec;
timeout();
}, time);
}
}
And then the onclick-function:
onclick="if(timeOutRunning) { stopTimeOut(); } else { startTimeOut(); }"