We Keep Coding

How i can trasform an object in an array of object?

I have this object
{
Bamboo: 7,
Eucalipto: 1,
Frassino: 2,
Ulivo: 1
}
I want to trasform this object in an array of object
[
{
plantName: Bamboo,
quantity: 7
},
{
plantName: Eucalipto,
quantity: 1
},
{
plantName: Frassino,
quantity: 2
},
{
plantName: Ulivo,
quantity: 1
},
]

What have you tried so far? Here's what I might do.
const dataObject = { Bamboo: 7, Eucalipto: 1, Frassino: 2, Ulivo: 1 };
const dataArray = Object.keys( dataObject ).map( ( key ) => {
return { 'plantName': key, 'quantity': dataObject[key] };
} );
console.log( dataArray );

You can map over the entries of the object, creating a new object with each key-value pair.
let obj = { Bamboo: 7, Eucalipto: 1, Frassino: 2, Ulivo: 1 };
let res = Object.entries(obj).map(([plantName,quantity])=>({plantName, quantity}));
console.log(res);

As you can see there are many different ways of doing this. But here are the basic steps as I learned them when I was starting out.
Create an array.
Iterate over the object.
Create a new object, and assign the key of the input object to "plantName", and the value of the input object to "quantity".
Add that new object to an array.
Here's an old-school way of achieving this:
const obj = { Bamboo: 7, Eucalipto: 1, Frassino: 2, Ulivo: 1 };
// Create an array
const arr = [];
// Iterate over the object
for (const key in obj) {
// Create a new object assigning the key
// to `plantName`, and the value to `quantity`
const newObj = {
plantName: key,
quantity: obj[key]
};
// Add the new object to the array
arr.push(newObj);
}
// Et voila!
console.log(arr);
Once you understand the basic concepts then you can start to introduce more complex methods like Object.entries, and map, but if you're just starting out with JavaScript this is probably more than enough to help you understand the process.

JavaScript: Filter object, keeping unique properties

I have an object that I need to filter against and return a new object. The goal is to get all ids that contain "A" in val, BUT only include ids with a unique val.
Below is what I'm currently doing, but I wonder if there's a more efficient way to do this. As can be seen when you run the code snippet, the new object should look like this:
{
"id1": {
"val": "AAA"
},
"id4": {
"val": "ABC"
}
}
const obj = {
id1: {
val: 'AAA',
},
id2: {
val: 'BBB',
},
id3: {
val: 'AAA',
},
id4: {
val: 'ABC',
},
};
// Filtered object
const obj2 = {};
let matched = '';
for (const key in obj) {
if (matched.indexOf(obj[key].val) < 0 && obj[key].val.indexOf('A') > -1) {
obj2[key] = obj[key];
matched += obj[key].val + ' ';
}
}
console.log(obj2);

Instead of building up a string for matched, you should use a Set (O(1) string comparisons for each operation instead of searching an increasingly long string in time proportional to the length of that string – and not running into issues with keys that contain spaces). includes is also a nice modern alternative to indexOf(…) > -1, although not faster.
Also, when using objects to store key/value mappings, you should use prototypeless objects – starting from Object.create(null) – to avoid setter weirdness (mostly __proto__) and tempting but fragile methods (name collisions with Object.prototype), and as a matter of good practice even when that isn’t a concern. Or just use Maps instead.
const obj = {
id1: {val: 'AAA'},
id2: {val: 'BBB'},
id3: {val: 'AAA'},
id4: {val: 'ABC'},
};
// Filtered object
const obj2 = Object.create(null);
const matched = new Set();
for (const key in obj) {
if (!matched.has(obj[key].val) && obj[key].val.includes('A')) {
obj2[key] = obj[key];
matched.add(obj[key].val);
}
}
console.log(obj2);

How to access a value outside of a promise [duplicate]

In JavaScript, I've created an object like so:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
Is it possible to add further properties to this object after its initial creation if the properties name is not determined until run time? i.e.
var propName = 'Property' + someUserInput
//imagine someUserInput was 'Z', how can I now add a 'PropertyZ' property to
//my object?

Yes.
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
data["PropertyD"] = 4;
// dialog box with 4 in it
alert(data.PropertyD);
alert(data["PropertyD"]);

ES6 for the win!
const b = 'B';
const c = 'C';
const data = {
a: true,
[b]: true, // dynamic property
[`interpolated-${c}`]: true, // dynamic property + interpolation
[`${b}-${c}`]: true
}
If you log data you get this:
{
a: true,
B: true,
interpolated-C: true,
B-C: true
}
This makes use of the new Computed Property syntax and Template Literals.

Yes it is possible. Assuming:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var propertyName = "someProperty";
var propertyValue = "someValue";
Either:
data[propertyName] = propertyValue;
or
eval("data." + propertyName + " = '" + propertyValue + "'");
The first method is preferred. eval() has the obvious security concerns if you're using values supplied by the user so don't use it if you can avoid it but it's worth knowing it exists and what it can do.
You can reference this with:
alert(data.someProperty);
or
data(data["someProperty"]);
or
alert(data[propertyName]);

ES6 introduces computed property names, which allows you to do
let a = 'key'
let myObj = {[a]: 10};
// output will be {key:10}

I know that the question is answered perfectly, but I also found another way to add new properties and wanted to share it with you:
You can use the function Object.defineProperty()
Found on Mozilla Developer Network
Example:
var o = {}; // Creates a new object
// Example of an object property added with defineProperty with a data property descriptor
Object.defineProperty(o, "a", {value : 37,
writable : true,
enumerable : true,
configurable : true});
// 'a' property exists in the o object and its value is 37
// Example of an object property added with defineProperty with an accessor property descriptor
var bValue;
Object.defineProperty(o, "b", {get : function(){ return bValue; },
set : function(newValue){ bValue = newValue; },
enumerable : true,
configurable : true});
o.b = 38;
// 'b' property exists in the o object and its value is 38
// The value of o.b is now always identical to bValue, unless o.b is redefined
// You cannot try to mix both :
Object.defineProperty(o, "conflict", { value: 0x9f91102,
get: function() { return 0xdeadbeef; } });
// throws a TypeError: value appears only in data descriptors, get appears only in accessor descriptors

Here, using your notation:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var propName = 'Property' + someUserInput
//imagine someUserInput was 'Z', how can I now add a 'PropertyZ' property to
//my object?
data[propName] = 'Some New Property value'

You can add as many more properties as you like simply by using the dot notation:
var data = {
var1:'somevalue'
}
data.newAttribute = 'newvalue'
or:
data[newattribute] = somevalue
for dynamic keys.

in addition to all the previous answers, and in case you're wondering how we're going to write dynamic property names in the Future using Computed Property Names ( ECMAScript 6 ), here's how:
var person = "John Doe";
var personId = "person_" + new Date().getTime();
var personIndex = {
[ personId ]: person
// ^ computed property name
};
personIndex[ personId ]; // "John Doe"
reference: Understanding ECMAScript 6 - Nickolas Zakas

Just an addition to abeing's answer above. You can define a function to encapsulate the complexity of defineProperty as mentioned below.
var defineProp = function ( obj, key, value ){
var config = {
value: value,
writable: true,
enumerable: true,
configurable: true
};
Object.defineProperty( obj, key, config );
};
//Call the method to add properties to any object
defineProp( data, "PropertyA", 1 );
defineProp( data, "PropertyB", 2 );
defineProp( data, "PropertyC", 3 );
reference: http://addyosmani.com/resources/essentialjsdesignpatterns/book/#constructorpatternjavascript

I know there are several answers to this post already, but I haven't seen one wherein there are multiple properties and they are within an array. And this solution by the way is for ES6.
For illustration, let's say we have an array named person with objects inside:
let Person = [{id:1, Name: "John"}, {id:2, Name: "Susan"}, {id:3, Name: "Jet"}]
So, you can add a property with corresponding value. Let's say we want to add a Language with a default value of EN.
Person.map((obj)=>({...obj,['Language']:"EN"}))
The Person array now would become like this:
Person = [{id:1, Name: "John", Language:"EN"},
{id:2, Name: "Susan", Language:"EN"}, {id:3, Name: "Jet", Language:"EN"}]

It can be useful if mixed new property add in runtime:
data = { ...data, newPropery: value}
However, spread operator use shallow copy but here we assign data to itself so should lose nothing

You can add properties dynamically using some of the options below:
In you example:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
You can define a property with a dynamic value in the next two ways:
data.key = value;
or
data['key'] = value;
Even more..if your key is also dynamic you can define using the Object class with:
Object.defineProperty(data, key, withValue(value));
where data is your object, key is the variable to store the key name and value is the variable to store the value.
I hope this helps!

I was looking for a solution where I can use dynamic key-names inside the object declaration (without using ES6 features like ... or [key]: value)
Here's what I came up with:
var obj = (obj = {}, obj[field] = 123, obj)
It looks a little bit complex at first, but it's really simple. We use the Comma Operator to run three commands in a row:
obj = {}: creates a new object and assigns it to the variable obj
obj[field] = 123: adds a computed property name to obj
obj: use the obj variable as the result of the parentheses/comma list
This syntax can be used inside a function parameter without the requirement to explictely declare the obj variable:
// The test function to see the result.
function showObject(obj) {
console.log(obj);
}
// My dynamic field name.
var field = "myDynamicField";
// Call the function with our dynamic object.
showObject( (obj = {}, obj[field] = 123, obj) );
/*
Output:
{
"myDynamicField": true
}
*/
Some variations
"strict mode" workaround:
The above code does not work in strict mode because the variable "obj" is not declared.
// This gives the same result, but declares the global variable `this.obj`!
showObject( (this.obj = {}, obj[field] = 123, obj) );
ES2015 code using computed property names in initializer:
// Works in most browsers, same result as the other functions.
showObject( {[field] = 123} );
This solution works in all modern browsers (but not in IE, if I need to mention that)
Super hacky way using JSON.parse():
// Create a JSON string that is parsed instantly. Not recommended in most cases.
showObject( JSON.parse( '{"' + field +'":123}') );
// read: showObject( JSON.parse( '{"myDynamicfield":123}') );
Allows special characters in keys
Note that you can also use spaces and other special characters inside computed property names (and also in JSON.parse).
var field = 'my dynamic field :)';
showObject( {[field] = 123} );
// result: { "my dynamic field :)": 123 }
Those fields cannot be accessed using a dot (obj.my dynamic field :) is obviously syntactically invalid), but only via the bracket-notation, i.e., obj['my dynamic field :)'] returns 123

The simplest and most portable way is.
var varFieldName = "good";
var ob = {};
Object.defineProperty(ob, varFieldName , { value: "Fresh Value" });
Based on #abeing answer!

Be careful while adding a property to the existing object using .(dot) method.
(.dot) method of adding a property to the object should only be used if you know the 'key' beforehand otherwise use the [bracket] method.
Example:
var data = {
'Property1': 1
};
// Two methods of adding a new property [ key (Property4), value (4) ] to the
// existing object (data)
data['Property2'] = 2; // bracket method
data.Property3 = 3; // dot method
console.log(data); // { Property1: 1, Property2: 2, Property3: 3 }
// But if 'key' of a property is unknown and will be found / calculated
// dynamically then use only [bracket] method not a dot method
var key;
for(var i = 4; i < 6; ++i) {
key = 'Property' + i; // Key - dynamically calculated
data[key] = i; // CORRECT !!!!
}
console.log(data);
// { Property1: 1, Property2: 2, Property3: 3, Property4: 4, Property5: 5 }
for(var i = 6; i < 2000; ++i) {
key = 'Property' + i; // Key - dynamically calculated
data.key = i; // WRONG !!!!!
}
console.log(data);
// { Property1: 1, Property2: 2, Property3: 3,
// Property4: 4, Property5: 5, key: 1999 }
Note the problem in the end of console log -
'key: 1999' instead of Property6: 6, Property7: 7,.........,Property1999: 1999. So the best way of adding dynamically created property is the [bracket] method.

A nice way to access from dynamic string names that contain objects (for example object.subobject.property)
function ReadValue(varname)
{
var v=varname.split(".");
var o=window;
if(!v.length)
return undefined;
for(var i=0;i<v.length-1;i++)
o=o[v[i]];
return o[v[v.length-1]];
}
function AssignValue(varname,value)
{
var v=varname.split(".");
var o=window;
if(!v.length)
return;
for(var i=0;i<v.length-1;i++)
o=o[v[i]];
o[v[v.length-1]]=value;
}
Example:
ReadValue("object.subobject.property");
WriteValue("object.subobject.property",5);
eval works for read value, but write value is a bit harder.
A more advanced version (Create subclasses if they dont exists, and allows objects instead of global variables)
function ReadValue(varname,o=window)
{
if(typeof(varname)==="undefined" || typeof(o)==="undefined" || o===null)
return undefined;
var v=varname.split(".");
if(!v.length)
return undefined;
for(var i=0;i<v.length-1;i++)
{
if(o[v[i]]===null || typeof(o[v[i]])==="undefined")
o[v[i]]={};
o=o[v[i]];
}
if(typeof(o[v[v.length-1]])==="undefined")
return undefined;
else
return o[v[v.length-1]];
}
function AssignValue(varname,value,o=window)
{
if(typeof(varname)==="undefined" || typeof(o)==="undefined" || o===null)
return;
var v=varname.split(".");
if(!v.length)
return;
for(var i=0;i<v.length-1;i++)
{
if(o[v[i]]===null || typeof(o[v[i]])==="undefined")
o[v[i]]={};
o=o[v[i]];
}
o[v[v.length-1]]=value;
}
Example:
ReadValue("object.subobject.property",o);
WriteValue("object.subobject.property",5,o);
This is the same that o.object.subobject.property

Here's how I solved the problem.
var obj = {
};
var field = "someouter.someinner.someValue";
var value = 123;
function _addField( obj, field, value )
{
// split the field into tokens
var tokens = field.split( '.' );
// if there's more than one token, this field is an object
if( tokens.length > 1 )
{
var subObj = tokens[0];
// define the object
if( obj[ subObj ] !== undefined ) obj[ subObj ] = {};
// call addfield again on the embedded object
var firstDot = field.indexOf( '.' );
_addField( obj[ subObj ], field.substr( firstDot + 1 ), value );
}
else
{
// no embedded objects, just field assignment
obj[ field ] = value;
}
}
_addField( obj, field, value );
_addField(obj, 'simpleString', 'string');
console.log( JSON.stringify( obj, null, 2 ) );
Generates the following object:
{
"someouter": {
"someinner": {
"someValue": 123
}
},
"simpleString": "string"
}

Yes it is possible. I have achieved using below implementation. for that I am getting array in response which I want in an object as list of attributes.
response = {
"equityMonths": [
{
"id": 1,
"month": "JANUARY",
"isEligible": false
},
{
"id": 2,
"month": "FEBRUARY",
"isEligible": true
},
{
"id": 3,
"month": "MARCH",
"isEligible": false
},
{
"id": 4,
"month": "APRIL",
"isEligible": true
},
{
"id": 5,
"month": "MAY",
"isEligible": false
},
{
"id": 6,
"month": "JUNE",
"isEligible": true
},
{
"id": 7,
"month": "JULY",
"isEligible": true
},
{
"id": 8,
"month": "AUGUST",
"isEligible": false
},
{
"id": 9,
"month": "SEPTEMBER",
"isEligible": true
},
{
"id": 10,
"month": "OCTOBER",
"isEligible": false
},
{
"id": 11,
"month": "NOVEMBER",
"isEligible": true
},
{
"id": 12,
"month": "DECEMBER",
"isEligible": false
}
]
}
here, I want equityMonths as an object and Jan to Dec it's key and isEligible as value. for that we have to use Object class's defineProperty() method which allows to add dynamic property into objects.
code for adding property dynamically to the object.
let equityMonth = new Object();
response.equityMonths.forEach(element => {
Object.defineProperty(equityMonth, element['month'], {
value: element['isEligible'],
writable: true,
enumerable: true,
configurable: true
});
});
console.log("DATA : " + JSON.stringify(equityMonth));
in above code we have array of equityMonths which we have converted as property into the object.
output:
DATA : {"JANUARY":false,"FEBRUARY":true,"MARCH":false,"APRIL":true,"MAY":false,"JUNE":true,"JULY":true,"AUGUST":false,"SEPTEMBER":true,"OCTOBER":false,"NOVEMBER":true,"DECEMBER":false}

A perfect easy way
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var newProperty = 'getThisFromUser';
data[newProperty] = 4;
console.log(data);
If you want to apply it on an array of data (ES6/TS version)
const data = [
{ 'PropertyA': 1, 'PropertyB': 2, 'PropertyC': 3 },
{ 'PropertyA': 11, 'PropertyB': 22, 'PropertyC': 33 }
];
const newProperty = 'getThisFromUser';
data.map( (d) => d[newProperty] = 4 );
console.log(data);

Definitely. Think of it as a dictionary or associative array. You can add to it at any point.

What differences between these two ways of object declaration?

I was just wondering if there are any differences between these ways of JSON object declaration or they do the same thing? What is the standard (recommended) way to declare an object?
According to my test, they both give the same result.
let data1 = {
"record_1": [1,2,3],
"record_2": [4,5,6]
}
let data2 = {
record_1: [1,2,3],
record_2: [4,5,6]
}
console.log(data1);
console.log(data2);
console.log(data1.record_1);
console.log(data2.record_1);
console.log(data1.record_2);
console.log(data2.record_2);
console.log(JSON.stringify(data1));
console.log(JSON.stringify(data2));
Output:
{
record_1:(3) [...],
record_2:(3) [...]
}
{
record_1:(3) [...],
record_2:(3) [...]
}
(3) [
1,
2,
3
]
(3) [
1,
2,
3
]
(3) [
4,
5,
6
]
(3) [
4,
5,
6
]
{"record_1":[1,2,3],"record_2":[4,5,6]}
{"record_1":[1,2,3],"record_2":[4,5,6]}

Both of the declarations are valid in Javascript
let data1 = {
"record_1": [1,2,3],
"record_2": [4,5,6]
}
let data2 = {
record_1: [1,2,3],
record_2: [4,5,6]
}
but when it comes to JSON , data2 is invalid JSON syntax. You can verify at https://jsonlint.com/
One more diff is as below:
var obj = { "some key" : "Val" }; // Valid in JS
var obj = { some key : "Val" }; // invalid in JS
So for JS , both of these deceleration plays different role depending on the situation. Normally, data2 type declaration is widely used.

Object's property name are of type string, if you provide any other type then that is automatically converted to string.
var obj = {1: "one"}
var keyName = Object.keys(obj)[0];
console.log(`key Name ${keyName} and type is ${typeof keyName}`);
I will prefer the explicit way (using the quotes) of declaration as this will reduced the confusion (from the reader of the code).

They're essentially the same. One difference is that when you use quotes, you can use special characters as key.
// invalid
const noQuotes = {
key with spaces: 123
}
// valid
const withQuotes = {
"key with spaces": 123
}

Cannot Access Window Variable [duplicate]

In JavaScript, I've created an object like so:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
Is it possible to add further properties to this object after its initial creation if the properties name is not determined until run time? i.e.
var propName = 'Property' + someUserInput
//imagine someUserInput was 'Z', how can I now add a 'PropertyZ' property to
//my object?

Yes.
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
data["PropertyD"] = 4;
// dialog box with 4 in it
alert(data.PropertyD);
alert(data["PropertyD"]);

ES6 for the win!
const b = 'B';
const c = 'C';
const data = {
a: true,
[b]: true, // dynamic property
[`interpolated-${c}`]: true, // dynamic property + interpolation
[`${b}-${c}`]: true
}
If you log data you get this:
{
a: true,
B: true,
interpolated-C: true,
B-C: true
}
This makes use of the new Computed Property syntax and Template Literals.

Yes it is possible. Assuming:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var propertyName = "someProperty";
var propertyValue = "someValue";
Either:
data[propertyName] = propertyValue;
or
eval("data." + propertyName + " = '" + propertyValue + "'");
The first method is preferred. eval() has the obvious security concerns if you're using values supplied by the user so don't use it if you can avoid it but it's worth knowing it exists and what it can do.
You can reference this with:
alert(data.someProperty);
or
data(data["someProperty"]);
or
alert(data[propertyName]);

ES6 introduces computed property names, which allows you to do
let a = 'key'
let myObj = {[a]: 10};
// output will be {key:10}

I know that the question is answered perfectly, but I also found another way to add new properties and wanted to share it with you:
You can use the function Object.defineProperty()
Found on Mozilla Developer Network
Example:
var o = {}; // Creates a new object
// Example of an object property added with defineProperty with a data property descriptor
Object.defineProperty(o, "a", {value : 37,
writable : true,
enumerable : true,
configurable : true});
// 'a' property exists in the o object and its value is 37
// Example of an object property added with defineProperty with an accessor property descriptor
var bValue;
Object.defineProperty(o, "b", {get : function(){ return bValue; },
set : function(newValue){ bValue = newValue; },
enumerable : true,
configurable : true});
o.b = 38;
// 'b' property exists in the o object and its value is 38
// The value of o.b is now always identical to bValue, unless o.b is redefined
// You cannot try to mix both :
Object.defineProperty(o, "conflict", { value: 0x9f91102,
get: function() { return 0xdeadbeef; } });
// throws a TypeError: value appears only in data descriptors, get appears only in accessor descriptors

Here, using your notation:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var propName = 'Property' + someUserInput
//imagine someUserInput was 'Z', how can I now add a 'PropertyZ' property to
//my object?
data[propName] = 'Some New Property value'

You can add as many more properties as you like simply by using the dot notation:
var data = {
var1:'somevalue'
}
data.newAttribute = 'newvalue'
or:
data[newattribute] = somevalue
for dynamic keys.

in addition to all the previous answers, and in case you're wondering how we're going to write dynamic property names in the Future using Computed Property Names ( ECMAScript 6 ), here's how:
var person = "John Doe";
var personId = "person_" + new Date().getTime();
var personIndex = {
[ personId ]: person
// ^ computed property name
};
personIndex[ personId ]; // "John Doe"
reference: Understanding ECMAScript 6 - Nickolas Zakas

Just an addition to abeing's answer above. You can define a function to encapsulate the complexity of defineProperty as mentioned below.
var defineProp = function ( obj, key, value ){
var config = {
value: value,
writable: true,
enumerable: true,
configurable: true
};
Object.defineProperty( obj, key, config );
};
//Call the method to add properties to any object
defineProp( data, "PropertyA", 1 );
defineProp( data, "PropertyB", 2 );
defineProp( data, "PropertyC", 3 );
reference: http://addyosmani.com/resources/essentialjsdesignpatterns/book/#constructorpatternjavascript

I know there are several answers to this post already, but I haven't seen one wherein there are multiple properties and they are within an array. And this solution by the way is for ES6.
For illustration, let's say we have an array named person with objects inside:
let Person = [{id:1, Name: "John"}, {id:2, Name: "Susan"}, {id:3, Name: "Jet"}]
So, you can add a property with corresponding value. Let's say we want to add a Language with a default value of EN.
Person.map((obj)=>({...obj,['Language']:"EN"}))
The Person array now would become like this:
Person = [{id:1, Name: "John", Language:"EN"},
{id:2, Name: "Susan", Language:"EN"}, {id:3, Name: "Jet", Language:"EN"}]

It can be useful if mixed new property add in runtime:
data = { ...data, newPropery: value}
However, spread operator use shallow copy but here we assign data to itself so should lose nothing

You can add properties dynamically using some of the options below:
In you example:
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
You can define a property with a dynamic value in the next two ways:
data.key = value;
or
data['key'] = value;
Even more..if your key is also dynamic you can define using the Object class with:
Object.defineProperty(data, key, withValue(value));
where data is your object, key is the variable to store the key name and value is the variable to store the value.
I hope this helps!

I was looking for a solution where I can use dynamic key-names inside the object declaration (without using ES6 features like ... or [key]: value)
Here's what I came up with:
var obj = (obj = {}, obj[field] = 123, obj)
It looks a little bit complex at first, but it's really simple. We use the Comma Operator to run three commands in a row:
obj = {}: creates a new object and assigns it to the variable obj
obj[field] = 123: adds a computed property name to obj
obj: use the obj variable as the result of the parentheses/comma list
This syntax can be used inside a function parameter without the requirement to explictely declare the obj variable:
// The test function to see the result.
function showObject(obj) {
console.log(obj);
}
// My dynamic field name.
var field = "myDynamicField";
// Call the function with our dynamic object.
showObject( (obj = {}, obj[field] = 123, obj) );
/*
Output:
{
"myDynamicField": true
}
*/
Some variations
"strict mode" workaround:
The above code does not work in strict mode because the variable "obj" is not declared.
// This gives the same result, but declares the global variable `this.obj`!
showObject( (this.obj = {}, obj[field] = 123, obj) );
ES2015 code using computed property names in initializer:
// Works in most browsers, same result as the other functions.
showObject( {[field] = 123} );
This solution works in all modern browsers (but not in IE, if I need to mention that)
Super hacky way using JSON.parse():
// Create a JSON string that is parsed instantly. Not recommended in most cases.
showObject( JSON.parse( '{"' + field +'":123}') );
// read: showObject( JSON.parse( '{"myDynamicfield":123}') );
Allows special characters in keys
Note that you can also use spaces and other special characters inside computed property names (and also in JSON.parse).
var field = 'my dynamic field :)';
showObject( {[field] = 123} );
// result: { "my dynamic field :)": 123 }
Those fields cannot be accessed using a dot (obj.my dynamic field :) is obviously syntactically invalid), but only via the bracket-notation, i.e., obj['my dynamic field :)'] returns 123

The simplest and most portable way is.
var varFieldName = "good";
var ob = {};
Object.defineProperty(ob, varFieldName , { value: "Fresh Value" });
Based on #abeing answer!

Be careful while adding a property to the existing object using .(dot) method.
(.dot) method of adding a property to the object should only be used if you know the 'key' beforehand otherwise use the [bracket] method.
Example:
var data = {
'Property1': 1
};
// Two methods of adding a new property [ key (Property4), value (4) ] to the
// existing object (data)
data['Property2'] = 2; // bracket method
data.Property3 = 3; // dot method
console.log(data); // { Property1: 1, Property2: 2, Property3: 3 }
// But if 'key' of a property is unknown and will be found / calculated
// dynamically then use only [bracket] method not a dot method
var key;
for(var i = 4; i < 6; ++i) {
key = 'Property' + i; // Key - dynamically calculated
data[key] = i; // CORRECT !!!!
}
console.log(data);
// { Property1: 1, Property2: 2, Property3: 3, Property4: 4, Property5: 5 }
for(var i = 6; i < 2000; ++i) {
key = 'Property' + i; // Key - dynamically calculated
data.key = i; // WRONG !!!!!
}
console.log(data);
// { Property1: 1, Property2: 2, Property3: 3,
// Property4: 4, Property5: 5, key: 1999 }
Note the problem in the end of console log -
'key: 1999' instead of Property6: 6, Property7: 7,.........,Property1999: 1999. So the best way of adding dynamically created property is the [bracket] method.

A nice way to access from dynamic string names that contain objects (for example object.subobject.property)
function ReadValue(varname)
{
var v=varname.split(".");
var o=window;
if(!v.length)
return undefined;
for(var i=0;i<v.length-1;i++)
o=o[v[i]];
return o[v[v.length-1]];
}
function AssignValue(varname,value)
{
var v=varname.split(".");
var o=window;
if(!v.length)
return;
for(var i=0;i<v.length-1;i++)
o=o[v[i]];
o[v[v.length-1]]=value;
}
Example:
ReadValue("object.subobject.property");
WriteValue("object.subobject.property",5);
eval works for read value, but write value is a bit harder.
A more advanced version (Create subclasses if they dont exists, and allows objects instead of global variables)
function ReadValue(varname,o=window)
{
if(typeof(varname)==="undefined" || typeof(o)==="undefined" || o===null)
return undefined;
var v=varname.split(".");
if(!v.length)
return undefined;
for(var i=0;i<v.length-1;i++)
{
if(o[v[i]]===null || typeof(o[v[i]])==="undefined")
o[v[i]]={};
o=o[v[i]];
}
if(typeof(o[v[v.length-1]])==="undefined")
return undefined;
else
return o[v[v.length-1]];
}
function AssignValue(varname,value,o=window)
{
if(typeof(varname)==="undefined" || typeof(o)==="undefined" || o===null)
return;
var v=varname.split(".");
if(!v.length)
return;
for(var i=0;i<v.length-1;i++)
{
if(o[v[i]]===null || typeof(o[v[i]])==="undefined")
o[v[i]]={};
o=o[v[i]];
}
o[v[v.length-1]]=value;
}
Example:
ReadValue("object.subobject.property",o);
WriteValue("object.subobject.property",5,o);
This is the same that o.object.subobject.property

Here's how I solved the problem.
var obj = {
};
var field = "someouter.someinner.someValue";
var value = 123;
function _addField( obj, field, value )
{
// split the field into tokens
var tokens = field.split( '.' );
// if there's more than one token, this field is an object
if( tokens.length > 1 )
{
var subObj = tokens[0];
// define the object
if( obj[ subObj ] !== undefined ) obj[ subObj ] = {};
// call addfield again on the embedded object
var firstDot = field.indexOf( '.' );
_addField( obj[ subObj ], field.substr( firstDot + 1 ), value );
}
else
{
// no embedded objects, just field assignment
obj[ field ] = value;
}
}
_addField( obj, field, value );
_addField(obj, 'simpleString', 'string');
console.log( JSON.stringify( obj, null, 2 ) );
Generates the following object:
{
"someouter": {
"someinner": {
"someValue": 123
}
},
"simpleString": "string"
}

Yes it is possible. I have achieved using below implementation. for that I am getting array in response which I want in an object as list of attributes.
response = {
"equityMonths": [
{
"id": 1,
"month": "JANUARY",
"isEligible": false
},
{
"id": 2,
"month": "FEBRUARY",
"isEligible": true
},
{
"id": 3,
"month": "MARCH",
"isEligible": false
},
{
"id": 4,
"month": "APRIL",
"isEligible": true
},
{
"id": 5,
"month": "MAY",
"isEligible": false
},
{
"id": 6,
"month": "JUNE",
"isEligible": true
},
{
"id": 7,
"month": "JULY",
"isEligible": true
},
{
"id": 8,
"month": "AUGUST",
"isEligible": false
},
{
"id": 9,
"month": "SEPTEMBER",
"isEligible": true
},
{
"id": 10,
"month": "OCTOBER",
"isEligible": false
},
{
"id": 11,
"month": "NOVEMBER",
"isEligible": true
},
{
"id": 12,
"month": "DECEMBER",
"isEligible": false
}
]
}
here, I want equityMonths as an object and Jan to Dec it's key and isEligible as value. for that we have to use Object class's defineProperty() method which allows to add dynamic property into objects.
code for adding property dynamically to the object.
let equityMonth = new Object();
response.equityMonths.forEach(element => {
Object.defineProperty(equityMonth, element['month'], {
value: element['isEligible'],
writable: true,
enumerable: true,
configurable: true
});
});
console.log("DATA : " + JSON.stringify(equityMonth));
in above code we have array of equityMonths which we have converted as property into the object.
output:
DATA : {"JANUARY":false,"FEBRUARY":true,"MARCH":false,"APRIL":true,"MAY":false,"JUNE":true,"JULY":true,"AUGUST":false,"SEPTEMBER":true,"OCTOBER":false,"NOVEMBER":true,"DECEMBER":false}

A perfect easy way
var data = {
'PropertyA': 1,
'PropertyB': 2,
'PropertyC': 3
};
var newProperty = 'getThisFromUser';
data[newProperty] = 4;
console.log(data);
If you want to apply it on an array of data (ES6/TS version)
const data = [
{ 'PropertyA': 1, 'PropertyB': 2, 'PropertyC': 3 },
{ 'PropertyA': 11, 'PropertyB': 22, 'PropertyC': 33 }
];
const newProperty = 'getThisFromUser';
data.map( (d) => d[newProperty] = 4 );
console.log(data);

Definitely. Think of it as a dictionary or associative array. You can add to it at any point.