I'm trying to create a fun little registration sheet to practice my validation. When I hit the submit button I have two issues. The first issue is my form keeps clearing every input field the moment I hit submit. I tried to use have my onclick = return false but this did nothing. The next issue I'm having is when I hit submit nothing happens at all. I'm not sure where I have messed up but if someone could point it out to me.
<!-- create a function to validate and pass information along -->
function Validation() {
<!-- declare variables -->
var ifErrors = false;
<!-- create the array to display error messages when cycled through -->
var ErrorMessage = new Array();
var myUserName = document.getElementById("txtUsername").value;
var myPassword = document.getElementById("txtPassword").value;
var myFirstName = document.getElementById("txtFirstName").value;
var myLastName = document.getElementById("txtLastName").value;
var myDateOfBirth = document.getElementById("txtDateOfBirth").value;
var myEmail = document.getElementById("txtEmail").value;
var myPhoneNumber = document.getElementById("txtPhoneNumber").value;
var LettersOnly = /^[a-z]+$/;
var DateOfBirthValidate = /^(0[1-9]|1[0-2])\/(0[1-9]|1\d|2\d|3[01])\/(19|20)\d{2}$/;
var Dates = new Date();
var DateSupplied = document.getElementById("txtDateOfBirth").value;
var PhoneNumberValidate = /^\([0-9]{3})\)?[-. ]?([0-9]{3})[-. ]?([0-9]{4})$/;
<!-- Begin validation -->
//validate for username being blank
if (myUserName = "")
{
ifErrors = true;
ErrorMessage.push('Username is required');
}
//validate for username not being 8 or more characters
if(myUserName.length < 8)
{
ifErrors = true;
ErrorMessage.push('Username must be 8 or more characters');
}
//validate for password being blank
if (myPassword == "")
{
ifErrors = true;
ErrorMessage.push('Password is required');
}
//validate for password not being 8 or more characters
if (myPassword.length < 8)
{
ifErrors = true;
ErrorMessage.push('Password must be 8 or more characters');
}
//validate for first name being blank
if (myFirstName == "")
{
ifErrors = true;
ErrorMessage.push('First name can not be blank');
}
//validate for last name being blank
if (myLastName == "")
{
ifErrors = true;
ErrorMessage.push('Last name can not be blank');
}
//validate for date of birth being blank
if (myDateOfBirth == "")
{
ifErrors = true;
ErrorMessage.push('Last name can not be blank');
}
//validate for date of birth not being formatted like (MM/DD/YYYY)
if (document.getElementById("txtDateOfBirth").value.length > 1)
{
if (! (txtDateOfBirth,valueOf().match(DateOfBirthValidate)));
{
ifErrors = true;
ErrorMessage.push('not a valid date of birth');
}
}
//create a variable to hold date, and see if it's greater than the current date
DateSupplied = new Date(DateSupplied);
if (DateSupplied > Dates)
{
ifErrors = true;
ErrorMessage.push('Date supplied can not be greater than the current date');
}
//va;idate for phone number
if (document.getElementById("txtPhoneNumber").value.length > 1)
{
if (! (txtPhoneNumber.valueOf().match(PhoneNumberValidate)))
{
ifErrors = true;
ErrorMessage.push('Phone number is not valid');
}
}
//successful validation
if (ifErrors == false)
{
ifErrors = true;
alert('Your registration has been processed');
//document.getElementById("RegisterForm").reset();
}
//Display list of messages in list
var DisplayMessage = "";
ErrorMessage.forEach(function (message)
{
DisplayMessage += "<li>" + message + "</li>";
}
);
document.getElementById("Errors").innerHTML = DisplayMessage;
}
<body>
<h3>Registration</h3>
<div>
<ul id="Errors"> </ul>
</div>
<br/>
<form ="RegisterForm">
<label id="lblUsername">Username:</label>
<input type="text" id="txtUsername" />
<br/>
<label id="lblPassword">Password:</label>
<input type="password" id="txtPassword" />
<br/>
<label id="lblFirstName">First Name:</label>
<input type="text" id="txtFirstName" />
<br/>
<label id="lblLastName">Last Name:</label>
<input type="text" id="txtLastName" />
<br/>
<label id="lblDateOfBirth">Date of Birth:</label>
<input type="text" id="txtDateOfBirth" />
<br/>
<label id="lblEmail">Email:</label>
<input type="text" id="txtEmail" />
<br/>
<label id="lblPhoneNumber">Email:</label>
<input type="text" id="txtPhoneNumber" />
<br/>
<input type="submit" value="Submit" onclick="Validation(); return false;" />
<input type="reset" value="reset Form" />
</form>
</body>
return false; does not stop the form from being submitted.
In order to achieve this behavior, you have to call .preventDefault() on the click event of the <input>, or on the submit event of the <form>. Example:
<form>
<input type="submit" onclick="someFn(event)">
</form>
<script>
function someFn(e) {
e.preventDefault();
console.log('form not submitted...');
}
</script>
To prevent all submit events in one go (regardless of which form element initiated it) you can call .preventDefault() on the form's onsubmit handler parameter (which is the submit event):
<form onsubmit="someFn(event)">
<input type="submit">
<button>Submit</button>
</form>
<script>
function someFn(e) {
e.preventDefault();
console.log('form not submitted...');
}
</script>
As a side-note, the submit input does not clear out your form. It sends it.
Because you haven't specified an action attribute on your <form> element, the submission is sent to the current URL.
Which, in practice, reloads the page.
Which, in practice renders a brand new instance of the form, obviously empty.
This is also the reason why "nothing happens at all". The default browser behavior when submitting a form is to actually load the <form>'s action URL (whether it's explicitly specified or not). You're navigating to that URL, along with the form's values. Which means you're not allowing the browser to finish running the code in Validation();. To wait around and see the results of Validation function, you have to prevent the default form submission behavior.
Docs:
<form>: MDN, HTML (Living Standard)
<input type="submit">: MDN, HTML (Living Standard)
Event.preventDefault(): MDN, DOM (Living Standard)
I have one simple form which have two fields called first name with id fname and email field with email. I have submit button with id called submit-btn.
I have disabled submit button using javascript like this
document.getElementById("submit-btn").disabled = true;
Now I am looking for allow submit if both of my fields are filled.
My full javascript is like this
<script type="text/javascript">
document.getElementById("submit-btn").disabled = true;
document.getElementById("submit-btn").onclick = function(){
window.open("https://google.com",'_blank');
}
</script>
I am learning javascript and does not know how I can do it. Let me know if someone here can help me for same.
Thanks!
Id propose something like this
Use a block, which encapsulates the names of variables and functions inside the block scope
Make small functions, which do just one thing
Prefer addEventListener over onclick or onanything
There are two types of events you could use on the inputs: input and change. input will react on every keystroke, check will only react, if you blur the input element
I added a check for validity to the email field with checkValidity method
{
const btn = document.getElementById("submit-btn");
const fname = document.getElementById("fname");
const email = document.getElementById("email");
deactivate()
function activate() {
btn.disabled = false;
}
function deactivate() {
btn.disabled = true;
}
function check() {
if (fname.value != '' && email.value != '' && email.checkValidity()) {
activate()
} else {
deactivate()
}
}
btn.addEventListener('click', function(e) {
alert('submit')
})
fname.addEventListener('input', check)
email.addEventListener('input', check)
}
<form>
<input type="text" name="" id="fname">
<input type="email" name="" id="email">
<input type="submit" id="submit-btn" value="Submit">
</form>
This is the simplest solution I can imagine:
myForm.oninput = () => {
btn.disabled = fname.value == '' || email.value == '' || !email.checkValidity();
}
<form id="myForm">
<input type="text" name="" id="fname">
<input type="email" name="" id="email">
<input type="submit" id="btn" value="Submit" disabled>
</form>
Personally, I prefer to use regex to check the e-mail, instead of checkValidity(). Something like this:
/^[\w\-\.\+]+\#[a-zA-Z0-9\.\-]+\.[a-zA-z0-9]{2,4}$/.test(email.value);
How would I go about preventing the page from refreshing when pressing the send button without any data in the fields?
The validation is setup working fine, all fields go red but then the page is immediately refreshed. My knowledge of JS is relatively basic.
In particular I think the processForm() function at the bottom is 'bad'.
HTML
<form id="prospects_form" method="post">
<input id="form_name" tabindex="1" class="boxsize" type="text" name="name" placeholder="Full name*" maxlength="80" value="" />
<input id="form_email" tabindex="2" class="boxsize" type="text" name="email" placeholder="Email*" maxlength="100" value="" />
<input id="form_subject" class="boxsize" type="text" name="subject" placeholder="Subject*" maxlength="50" value="FORM: Row for OUBC" />
<textarea id="form_message" class="boxsize" name="message" placeholder="Message*" tabindex="3" rows="6" cols="5" maxlength="500"></textarea>
<button id="form_send" tabindex="5" class="btn" type="submit" onclick="return processForm()">Send</button>
<div id="form_validation">
<span class="form_captcha_code"></span>
<input id="form_captcha" class="boxsize" type="text" name="form_captcha" placeholder="Enter code" tabindex="4" value="" />
</div>
<div class="clearfix"></div>
</form>
JS
$(document).ready(function() {
// Add active class to inputs
$("#prospects_form .boxsize").focus(function() { $(this).addClass("hasText"); });
$("#form_validation .boxsize").focus(function() { $(this).parent().addClass("hasText"); });
// Remove active class from inputs (if empty)
$("#prospects_form .boxsize").blur(function() { if ( this.value === "") { $(this).removeClass("hasText"); } });
$("#form_validation .boxsize").blur(function() { if ( this.value === "") { $(this).parent().removeClass("hasText"); } });
///////////////////
// START VALIDATION
$("#prospects_form").ready(function() {
// DEFINE GLOBAL VARIABLES
var valName = $('#form_name'),
valEmail = $("#form_email"),
valEmailFormat = /^(([^<>()[\]\\.,;:\s#\"]+(\.[^<>()[\]\\.,;:\s#\"]+)*)|(\".+\"))#((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/,
valMsg = $('#form_message'),
valCaptcha = $('#form_captcha'),
valCaptchaCode = $('.form_captcha_code');
// Generate captcha
function randomgen() {
var rannumber = "";
// Iterate through 1 to 9, 4 times
for(ranNum=1; ranNum<=4; ranNum++){ rannumber+=Math.floor(Math.random()*10).toString(); }
// Apply captcha to element
valCaptchaCode.html(rannumber);
}
randomgen();
// CAPTCHA VALIDATION
valCaptcha.blur(function() {
function formCaptcha() {
if ( valCaptcha.val() == valCaptchaCode.html() ) {
// Incorrect
valCaptcha.parent().addClass("invalid");
return false;
} else {
// Correct
valCaptcha.parent().removeClass("invalid");
return true;
}
}
formCaptcha();
});
// Remove invalid class from captcha if typing
valCaptcha.keypress(function() {
valCaptcha.parent().removeClass("invalid");
});
// EMAIL VALIDATION (BLUR)
valEmail.blur(function() {
function formEmail() {
if (!valEmailFormat.test(valEmail.val()) && valEmail.val() !== "" ) {
// Incorrect
valEmail.addClass("invalid");
} else {
// Correct
valEmail.removeClass("invalid");
}
}
formEmail();
});
// Remove invalid class from email if typing
valEmail.keypress(function() {
valEmail.removeClass("invalid");
});
// VALIDATION ON SUBMIT
$('#prospects_form').submit(function() {
console.log('user hit send button');
// EMAIL VALIDATION (SUBMIT)
function formEmailSubmit() {
if (!valEmailFormat.test(valEmail.val())) {
// Incorrect
valEmail.addClass("invalid");
} else {
// Correct
valEmail.removeClass("invalid");
}
}
formEmailSubmit();
// Validate captcha
function formCaptchaSubmit() {
if( valCaptcha.val() === valCaptchaCode.html() ) {
// Captcha is correct
} else {
// Captcha is incorrect
valCaptcha.parent().addClass("invalid");
randomgen();
}
}
formCaptchaSubmit();
// If NAME field is empty
function formNameSubmit() {
if ( valName.val() === "" ) {
// Name is empty
valName.addClass("invalid");
} else {
valName.removeClass("invalid");
}
}
formNameSubmit();
// If MESSAGE field is empty
function formMessageSubmit() {
if ( valMsg.val() === "" ) {
// Name is empty
valMsg.addClass("invalid");
} else {
valMsg.removeClass("invalid");
}
}
formMessageSubmit();
// Submit form (if all good)
function processForm() {
if ( formEmailSubmit() && formCaptchaSubmit() && formNameSubmit() && formMessageSubmit() ) {
$("#prospects_form").attr("action", "/clients/oubc/row-for-oubc-send.php");
$("#form_send").attr("type", "submit");
return true;
} else if( !formEmailSubmit() ) {
valEmail.addClass("invalid");
return false;
} else if ( !formCaptchaSubmit() ) {
valCaptcha.parent().addClass("invalid");
return false;
} else if ( !formNameSubmit() ) {
valName.addClass("invalid");
return false;
} else if ( !formMessageSubmit() ) {
valMsg.addClass("invalid");
return false;
} else {
return false;
}
}
});
});
// END VALIDATION
/////////////////
});
You can prevent the form from submitting with
$("#prospects_form").submit(function(e) {
e.preventDefault();
});
Of course, in the function, you can check for empty fields, and if anything doesn't look right, e.preventDefault() will stop the submit.
Without jQuery:
var form = document.getElementById("myForm");
function handleForm(event) { event.preventDefault(); }
form.addEventListener('submit', handleForm);
Add this onsubmit="return false" code:
<form onsubmit="return false">
That fixed it for me. It will still run the onClick function you specify.
Replace button type to button:
<button type="button">My Cool Button</button>
One great way to prevent reloading the page when submitting using a form is by adding return false with your onsubmit attribute.
<form onsubmit="yourJsFunction();return false">
<input type="text"/>
<input type="submit"/>
</form>
You can use this code for form submission without a page refresh. I have done this in my project.
$(function () {
$('#myFormName').on('submit',function (e) {
$.ajax({
type: 'post',
url: 'myPageName.php',
data: $('#myFormName').serialize(),
success: function () {
alert("Email has been sent!");
}
});
e.preventDefault();
});
});
This problem becomes more complex when you give the user 2 possibilities to submit the form:
by clicking on an ad hoc button
by hitting Enter key
In such a case you will need a function which detects the pressed key in which you will submit the form if Enter key was hit.
And now comes the problem with IE (in any case version 11)
Remark:
This issue does not exist with Chrome nor with FireFox !
When you click the submit button the form is submitted once; fine.
When you hit Enter the form is submitted twice ... and your servlet will be executed twice. If you don't have PRG (post redirect get) architecture serverside the result might be unexpected.
Even though the solution looks trivial, it tooks me many hours to solve this problem, so I hope it might be usefull for other folks.
This solution has been successfully tested, among others, on IE (v 11.0.9600.18426), FF (v 40.03) & Chrome (v 53.02785.143 m 64 bit)
The source code HTML & js are in the snippet. The principle is described there.
Warning:
You can't test it in the snippet because the post action is not
defined and hitting Enter key might interfer with stackoverflow.
If you faced this issue, then just copy/paste js code to your environment and adapt it to your context.
/*
* inForm points to the form
*/
var inForm = document.getElementById('idGetUserFrm');
/*
* IE submits the form twice
* To avoid this the boolean isSumbitted is:
* 1) initialized to false when the form is displayed 4 the first time
* Remark: it is not the same event as "body load"
*/
var isSumbitted = false;
function checkEnter(e) {
if (e && e.keyCode == 13) {
inForm.submit();
/*
* 2) set to true after the form submission was invoked
*/
isSumbitted = true;
}
}
function onSubmit () {
if (isSumbitted) {
/*
* 3) reset to false after the form submission executed
*/
isSumbitted = false;
return false;
}
}
<!DOCTYPE html>
<html>
<body>
<form id="idGetUserFrm" method="post" action="servletOrSomePhp" onsubmit="return onSubmit()">
First name:<br>
<input type="text" name="firstname" value="Mickey">
<input type="submit" value="Submit">
</form>
</body>
</html>
The best solution is onsubmit call any function whatever you want and return false after it.
onsubmit="xxx_xxx(); return false;"
Most people would prevent the form from submitting by calling the event.preventDefault() function.
Another means is to remove the onclick attribute of the button, and get the code in processForm() out into .submit(function() { as return false; causes the form to not submit. Also, make the formBlaSubmit() functions return Boolean based on validity, for use in processForm();
katsh's answer is the same, just easier to digest.
(By the way, I'm new to stackoverflow, give me guidance please. )
In pure Javascript, use: e.preventDefault()
e.preventDefault() is used in jquery but works in javascript.
document.querySelector(".buttonclick").addEventListener("click",
function(e){
//some code
e.preventDefault();
})
The best way to do so with JS is using preventDefault() function.
Consider the code below for reference:
function loadForm(){
var loginForm = document.querySelector('form'); //Selecting the form
loginForm.addEventListener('submit', login); //looking for submit
}
function login(e){
e.preventDefault(); //to stop form action i.e. submit
}
Personally I like to validate the form on submit and if there are errors, just return false.
$('form').submit(function() {
var error;
if ( !$('input').val() ) {
error = true
}
if (error) {
alert('there are errors')
return false
}
});
http://jsfiddle.net/dfyXY/
$("#buttonID").click(function (e) {
e.preventDefault();
//some logic here
}
If you want to use Pure Javascript then the following snippet will be better than anything else.
Suppose:
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<title>Form Without Submiting With Pure JS</title>
<script type="text/javascript">
window.onload = function(){
/**
* Just Make sure to return false so that your request will not go the server script
*/
document.getElementById('simple_form').onsubmit = function(){
// After doing your logic that you want to do
return false
}
}
</script>
</head>
<body>
</body>
</html>
<form id="simple_form" method="post">
<!-- Your Inputs will go here -->
<input type="submit" value="Submit Me!!" />
</form>
Hope so it works for You!!
Just use "javascript:" in your action attribute of form if you are not using action.
In my opinion, most answers are trying to solve the problem asked on your question, but I don't think that's the best approach for your scenario.
How would I go about preventing the page from refreshing when pressing the send button without any data in the fields?
A .preventDefault() does indeed not refresh the page. But I think that a simple require on the fields you want populated with data, would solve your problem.
<form id="prospects_form" method="post">
<input id="form_name" tabindex="1" class="boxsize" type="text" name="name" placeholder="Full name*" maxlength="80" value="" required/>
<input id="form_email" tabindex="2" class="boxsize" type="text" name="email" placeholder="Email*" maxlength="100" value="" required/>
<input id="form_subject" class="boxsize" type="text" name="subject" placeholder="Subject*" maxlength="50" value="FORM: Row for OUBC" required/>
<textarea id="form_message" class="boxsize" name="message" placeholder="Message*" tabindex="3" rows="6" cols="5" maxlength="500"></textarea>
</form>
Notice the require tag added at the end of each input. The result will be the same: not refreshing the page without any data in the fields.
<form onsubmit="myFunction(event)">
Name : <input type="text"/>
<input class="submit" type="submit">
</form>
<script>
function myFunction(event){
event.preventDefault();
//code here
}
</script>
function ajax_form(selector, obj)
{
var form = document.querySelectorAll(selector);
if(obj)
{
var before = obj.before ? obj.before : function(){return true;};
var $success = obj.success ? obj.success: function(){return true;};
for (var i = 0; i < form.length; i++)
{
var url = form[i].hasAttribute('action') ? form[i].getAttribute('action') : window.location;
var $form = form[i];
form[i].submit = function()
{
var xhttp = new XMLHttpRequest();
xhttp.open("POST", url, true);
var FD = new FormData($form);
/** prevent submiting twice */
if($form.disable === true)
return this;
$form.disable = true;
if(before() === false)
return;
xhttp.addEventListener('load', function()
{
$form.disable = false;
return $success(JSON.parse(this.response));
});
xhttp.send(FD);
}
}
}
return form;
}
Didn't check how it works. You can also bind(this) so it will work like jquery ajaxForm
use it like:
ajax_form('form',
{
before: function()
{
alert('submiting form');
// if return false form shouldn't be submitted
},
success:function(data)
{
console.log(data)
}
}
)[0].submit();
it return nodes so you can do something like submit i above example
so far from perfection but it suppose to work, you should add error handling or remove disable condition
Sometimes e.preventDefault(); works then developers are happy but sometimes not work then developers are sad then I found solution why sometimes not works
first code sometimes works
$("#prospects_form").submit(function(e) {
e.preventDefault();
});
second option why not work?
This doesn't work because jquery or other javascript library not loading properly you can check it in console that all jquery and javascript files are loaded properly or not.
This solves my problem. I hope this will be helpful for you.
I hope this will be the last answer
$('#the_form').submit(function(e){
e.preventDefault()
alert($(this).serialize())
// var values = $(this).serialize()
// logic....
})
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<form id="the_form">
Label-A <input type="text" name='a'required><br>
Label-B <input type="text" name="b" required><br>
Label-C <input type="password" name="c" required><br>
Label-D <input type="number" name="d" required><br>
<input type="submit" value="Save without refresh">
</form>
You can do this by clearing the state as below. add this to very beginning of the document.ready function.
if ( window.history.replaceState ) {
window.history.replaceState( null, null, window.location.href );
}
I have a form in html which I want to run verification in Javascript first before POST ing to PHP. However the link up to the PHP section does not seem to be working despite the fact that I have assigned names to each input tag and specified an action attribute in the form tag.
Here is the HTML code for the form:
<form id="signupform" action="signupform.php" method="post">
<input type="text" name="Email" placeholder="Email Address" class="signupinput" id="email" />
<br />
<input type="password" name="Password" placeholder="Password" class="signupinput" id="passwordone" />
<br />
<input type="password" placeholder="Repeat Password" class="signupinput" id="passwordtwo" />
<br />
<input type="button" value="Sign Up" class="signupinput" onClick="verifypass()" id="submit" />
</form>
The button calls the javascript function which I use to verify the values of my form before sending to php:
function verifypass() {
var form = document.getElementById("signupform");
var email = document.getElementById("email").value;
var password1 = document.getElementById("passwordone").value;
var password2 = document.getElementById("passwordtwo").value;
var emailcode = /^(([^<>()\[\]\\.,;:\s#"]+(\.[^<>()\[\]\\.,;:\s#"]+)*)|(".+"))#((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/;
if (emailcode.test(email)) {
if (password1.length > 6) {
if (password1 == password2) {
form.submit(); //this statement does not execute
} else {
$("#passwordone").notify("Passwords do not match!", {
position: "right"
})
}
} else {
$("#passwordone").notify("Password is too short!", {
position: "right"
})
}
} else {
$("#email").notify("The email address you have entered is invalid.", {
position: "right"
})
}
}
For some reason, some JavaScript implementations mix up HTML element IDs and code. If you use a different ID for your submit button it will work (id="somethingelse" instead of id="submit"):
<input type="button" value="Sign Up" class="signupinput" onClick="verifypass()" id="somethingelse" />
(I think id="submit" has the effect that the submit method is overwritten on the form node, using the button node. I never figured out why, perhaps to allow shortcuts like form.buttonid.value etc. I just avoid using possible method names as IDs.)
I'm not sure why that's not working, but you get around having to call form.submit(); if you use a <input type="submit"/> instead of <input type="button"/> and then use the onsubmit event instead of onclick. That way, IIRC, all you have to do is return true or false.
I think it would be better if you do it real time, for send error when the user leave each input. For example, there is an input, where you set the email address. When the onfocusout event occured in Javascript you can add an eventlistener which is call a checker function to the email input.
There is a quick example for handling form inputs. (Code below)
It is not protect you against the serious attacks, because in a perfect system you have to check on the both side.
Description for the Javascript example:
There is two input email, and password and there is a hidden button which is shown if everything is correct.
The email check and the password check functions are checking the input field values and if it isn't 3 mark length then show error for user.
The showIt funciton get a boolean if it is true it show the button to submit.
The last function is iterate through the fields object where we store the input fields status, and if there is a false it return false else its true. This is the boolean what the showIt function get.
Hope it is understandable.
<style>
#send {
display: none;
}
</style>
<form>
<input type="text" id="email"/>
<input type="password" id="password"/>
<button id="send" type="submit">Send</button>
</form>
<div id="error"></div>
<script>
var fields = {
email: false,
password: false
};
var email = document.getElementById("email");
email.addEventListener("focusout", emailCheck, false);
var password = document.getElementById("password");
password.addEventListener("focusout", passwordCheck, false);
function emailCheck(){
if(email.value.length < 3) {
document.getElementById("error").innerHTML = "Bad Email";
fields.email = false;
} else {
fields.email = true;
document.getElementById("error").innerHTML = "";
}
show = checkFields();
console.log("asdasd"+show);
showIt(show);
}
function passwordCheck(){
if(password.value.length < 3) {
document.getElementById("error").innerHTML = "Bad Password";
fields.password = false;
} else {
fields.password = true;
document.getElementById("error").innerHTML = "";
}
show = checkFields();
console.log(show);
showIt(show);
}
function showIt(show) {
if (show) {
document.getElementById("send").style.display = "block";
} else {
document.getElementById("send").style.display = "none";
}
}
function checkFields(){
isFalse = Object.keys(fields).map(function(objectKey, index) {
if (fields[objectKey] === false) {
return false;
}
});
console.log(isFalse);
if (isFalse.indexOf(false) >= 0) {
return false;
}
return true;
}
</script>
I wants to check, if entered field's value is valid or not using onchange before submitting the page. I have written like below.It validates well.But how to activate 'NEXT' button when there is no error on input entries.
<div><input type="text" name="your_name" id="your_name" onchange = "validate_Name(this,1,4)" />
<span id="your_name-error" class="signup-error">*</span>
</div>
<div><input type="text" name="your_addr" id="your_addr" onchange = "validate_Name(this,1,4)" />
<span id="your_addr-error" class="signup-error">*</span>
</div>
<input class="btnAction" type="button" name="next" id="next" value="Next" style="display:none;">
<script type="text/javascript" src="../inc/validate_js.js"></script>
<script>
$(document).ready(function() {
$("#next").click(function() {
var output = validate(); //return true if no error
if (output) {
var current = $(".active"); //activating NEXT button
} else {
alert("Please correct the fields.");
}
});
}
function validate() {
//What should write here?I want to analyse the validate_js.js value here.
}
</script>
Inside validate_js.js
function validate_Name(inputVal, minLeng, maxLeng) {
if (inputVal.value.length > maxLeng) {
inputVal.style.background = "red";
inputVal.nextElementSibling.innerHTML = "<br>Max Characters:" + maxLeng;
} else if (!(tBox.value.match(letters))) {
inputVal.style.background = "red";
inputVal.nextElementSibling.innerHTML = "<br>Use only a-zA-Z0-9_ ";
} else {
inputVal.style.background = "white";
inputVal.nextElementSibling.innerHTML = "";
}
}
If by "activating" you want to make it visible, you can call $('#next').show().
However if you want to simulate a click on it, with jQuery you can simply call $('#next').click() or $('#next').trigger('click') as described here. Also, you might want to put everything in a form and programmatically submit the form when the input passes validation.
You could possibly trigger the change event for each field so it validates each one again.
eg.
function validate() {
$("#your_name").trigger('change');
$("#your_addr").trigger('change');
}