Unable to pass string variable to JS date object - javascript

I am trying to pass string variable to JS date object and create date in future.
Its easy to do in this way:
var d = new Date();
var year = d.getFullYear();
var month = d.getMonth();
var day = d.getDate();
var my_date = new Date(year + 1, month +1, day +1);
But how I can pass it with string variable, so that I can achieve something like this:
var d = new Date();
var year = d.getFullYear();
var month = d.getMonth();
var day = d.getDate();
var my_variable = 'year + 1, month +1, day +1';
var my_date = new Date(my_variable);
In this case it returns Invalid date


Note
You need to be a little careful with date arithmetic since it's not symmetric and may give odd results, e.g. 29 Feb 2016 + 1 year gives 1 March 2017, and 31 July minus 1 month is 1 July since there is no 31 June, it rolls over to July, and so on.
Given your original requirement, you might consider a parser for your particular format, e.g.
function myParse(s, date) {
date = date || new Date();
// Default values object
var values = {
year:{sign:1, value:0}, month:{sign:1, value:0}, day:{sign:1, value:0}
};
// Tokenise string
var part = s.toLowerCase().match(/[a-z]+|\d+|[+-]/ig);
// Process the tokens
if (part) {
for (var i=0, iLen=part.length; i<iLen; i++) {
if (part[i] in values) {
values[part[i]].sign = part[i+1] == '+'? 1 : -1;
values[part[i]].value = +part[i+2];
i += 2;
}
}
}
// Apply to date
date.setFullYear(
date.getFullYear() + values.year.sign * values.year.value,
date.getMonth() + values.month.sign * values.month.value,
date.getDate() + values.day.sign * values.day.value
);
return date;
}
// Examples
var options = {day:'2-digit',month:'short',year:'numeric'};
console.log('Today is ' + (new Date().toLocaleString('en-gb', options)));
['year+1,month+1,day+1', // one of each
'year+2,day+2', // missing parameters
'day + 15, month +2', // any order, random whitespace
'month - 3' // subtraction
].forEach(function(s) {
console.log(s + '\n' + myParse(s).toLocaleString('en-gb', options));
});
It's fairly tolerant but you should validate the input. It could be extended to handle time too, and also the end of month issues noted above.


Unfortunately javascript (and all the languages that I know off hand) do not work like that.
You could use an eval statement instead, which allows you to create the entire instruction as a string and run that string...
var my_variable = 'year + 1, month +1, day +1';
eval('var my_date = new Date(' + my_variable + ');');
HOWEVER using of eval is dangerous, and could open you up to unexpected attacks. Only use it if absolutely necessary, and if you're sure that the string being used is "safe"


You are inserting Javascript code as a string, which makes no sense to the Date class.
You can have your variables stored in an array to pass them elegantly to Date.
const dates = [year + 1, month +1, day +1]
const my_date = new Date(...dates);
I've read a follow up comment which indicates you'll only be getting strings from wherever you are retrieving the data from. Firstly if the string is in the format of 'year + 1, month + 1, day + 1', it'll never make sense to the Date object. If the string is just 3 numbers separated by a comma, you could split the string at the commas and pass them to the Date object in the same fashion.
const dates = myString.split(',');
const my_date = new Date(...dates);

Related

Add trailing zero in time format in jquery [duplicate]

I've created this script to calculate the date for 10 days in advance in the format of dd/mm/yyyy:
var MyDate = new Date();
var MyDateString = new Date();
MyDate.setDate(MyDate.getDate()+10);
MyDateString = MyDate.getDate() + '/' + (MyDate.getMonth()+1) + '/' + MyDate.getFullYear();
I need to have the date appear with leading zeroes on the day and month component by way of adding these rules to the script. I can't seem to get it to work.
if (MyDate.getMonth < 10)getMonth = '0' + getMonth;
and
if (MyDate.getDate <10)get.Date = '0' + getDate;
If someone could show me where to insert these into the script I would be really appreciative.

Try this: http://jsfiddle.net/xA5B7/
var MyDate = new Date();
var MyDateString;
MyDate.setDate(MyDate.getDate() + 20);
MyDateString = ('0' + MyDate.getDate()).slice(-2) + '/'
+ ('0' + (MyDate.getMonth()+1)).slice(-2) + '/'
+ MyDate.getFullYear();
EDIT:
To explain, .slice(-2) gives us the last two characters of the string.
So no matter what, we can add "0" to the day or month, and just ask for the last two since those are always the two we want.
So if the MyDate.getMonth() returns 9, it will be:
("0" + "9") // Giving us "09"
so adding .slice(-2) on that gives us the last two characters which is:
("0" + "9").slice(-2)
"09"
But if MyDate.getMonth() returns 10, it will be:
("0" + "10") // Giving us "010"
so adding .slice(-2) gives us the last two characters, or:
("0" + "10").slice(-2)
"10"

The modern way
The new modern way to do this is to use toLocaleDateString, because it allows you not only to format a date with proper localization, but even to pass format options to achieve the desired result:
const date = new Date(2018, 2, 1)
const result = date.toLocaleDateString("en-GB", { // you can use undefined as first argument
year: "numeric",
month: "2-digit",
day: "2-digit",
})
console.log(result) // outputs “01/03/2018”
Or using a Temporal object (still in proposal, caniuse):
const date = new Temporal.PlainDate(2018, 3, 1) // also works with zoned date
const result = date.toLocaleString("en-GB", { // you can use undefined as first argument
year: "numeric",
month: "2-digit",
day: "2-digit",
})
console.log(result) // outputs “01/03/2018”
When you use undefined as the first argument it will detect the browser language, instead. Alternatively, you can use 2-digit on the year option, too.
Performance
If you plan to format a lot of dates, you should consider using Intl.DateTimeFormat instead:
const formatter = new Intl.DateTimeFormat("en-GB", { // <- re-use me
year: "numeric",
month: "2-digit",
day: "2-digit",
})
const date = new Date(2018, 2, 1) // can also be a Temporal object
const result = formatter.format(date)
console.log(result) // outputs “01/03/2018”
The formatter is compatible with Date and Temporal objects.
Historical dates
Unlike in the Temporal constructor years between 0 and 99 will be interpreted as 20th century years on the Date constructor. To prevent this, initialize the date like so:
const date = new Date()
date.setFullYear(18, 2, 1) // the year is A.D. 18
This is not required for Temporal objects, but years below 1000 will not contain leading zeros in all cases, because the formatter (that is shared for the Date and Temporal API) does not support 4-digit formatting at all. In this case you have to do manual formatting (see below).
For the ISO 8601 format
If you want to get your date in the YYYY-MM-DD format (ISO 8601), the solution looks different:
const date = new Date(Date.UTC(2018, 2, 1))
const result = date.toISOString().split('T')[0]
console.log(result) // outputs “2018-03-01”
Your input date should be in the UTC format or toISOString() will fix that for you. This is done by using Date.UTC as shown above.
Historical dates for the ISO 8601 format
Unlike in the Temporal constructor years between 0 and 99 will be interpreted as 20th century years on the Date constructor. To prevent this, initialize the date like so to be used for the ISO 8601 format:
const date = new Date()
date.setUTCFullYear(18, 2, 1) // the year is A.D. 18
Note that the ISO format for Temporal objects with dates before the year 1000 or after the year 9999 will have a different formatting compared to the legacy Date API. It is recommend to fallback to custom formatting to enforce 4 digit years in all circumstances.
Custom 4-digit formatting on the year
Sadly, the formatter doesn't support leading zeros on the year. There is no 4-digit option. This will remain for Temporal objects as well, because they do share the same formatter.
Fortunately, the ISO format of the Date API will always display at least 4 digits on the year, although Temporal objects do not. So at least for the Date API you can format historical dates before the year 1000 with leading zeros by falling back to a manual formatting approach using part of the ISO 8601 format method:
const date = new Date()
date.setUTCFullYear(18, 2, 1)
const ymd = date.toISOString().split('T')[0].split('-')
const result = `${ymd[2]}/${ymd[1]}/${ymd[0]}`
console.log(result) // outputs “01/03/0018”
For a Temporal object a different route is necessary, since the ISOYearString will be formatted differently for dates before the year 1000 and after the year 9999 as mentioned before:
const date = new Temporal.PlainDate(2018, 3, 1) // also works with zoned date
const zeroPad = (n, digits) => n.toString().padStart(digits, '0');
const result = `${zeroPad(date.day, 2)}/${zeroPad(date.month, 2)}/${zeroPad(date.year, 4)}`;
console.log(result) // outputs “01/03/0018”
Miscellaneous
For the Date and Temporal API there is also toLocaleTimeString, that allows you to localize and format the time of a date.

Here is an example from the Date object docs on the Mozilla Developer Network using a custom "pad" function, without having to extend Javascript's Number prototype. The handy function they give as an example is
function pad(n){return n<10 ? '0'+n : n}
And below is it being used in context.
/* use a function for the exact format desired... */
function ISODateString(d){
function pad(n){return n<10 ? '0'+n : n}
return d.getUTCFullYear()+'-'
+ pad(d.getUTCMonth()+1)+'-'
+ pad(d.getUTCDate())+'T'
+ pad(d.getUTCHours())+':'
+ pad(d.getUTCMinutes())+':'
+ pad(d.getUTCSeconds())+'Z'
}
var d = new Date();
console.log(ISODateString(d)); // prints something like 2009-09-28T19:03:12Z

For you people from the future (ECMAScript 2017 and beyond)
Solution
"use strict"
const today = new Date()
const year = today.getFullYear()
const month = `${today.getMonth() + 1}`.padStart(2, "0")
const day = `${today.getDate()}`.padStart(2, "0")
const stringDate = [day, month, year].join("/") // 13/12/2017
Explaination
the String.prototype.padStart(targetLength[, padString]) adds as many as possible padString in the String.prototype target so that the new length of the target is targetLength.
Example
"use strict"
let month = "9"
month = month.padStart(2, "0") // "09"
let byte = "00000100"
byte = byte.padStart(8, "0") // "00000100"

You can define a "str_pad" function (as in php):
function str_pad(n) {
return String("00" + n).slice(-2);
}

I found the shorterst way to do this:
MyDateString.replace(/(^|\D)(\d)(?!\d)/g, '$10$2');
will add leading zeros to all lonely, single digits

Number.prototype.padZero= function(len){
var s= String(this), c= '0';
len= len || 2;
while(s.length < len) s= c + s;
return s;
}
//in use:
(function(){
var myDate= new Date(), myDateString;
myDate.setDate(myDate.getDate()+10);
myDateString= [myDate.getDate().padZero(),
(myDate.getMonth()+1).padZero(),
myDate.getFullYear()].join('/');
alert(myDateString);
})()
/* value: (String)
09/09/2010
*/

Nowadays you can also utilize String.prototype.padStart to reach the goal in quick and easy way
String(new Date().getMonth() + 1).padStart(2, '0')
The availability can be assessed at caniuse
var date = new Date()
var year = date.getFullYear()
var month = String(date.getMonth() + 1).padStart(2, '0')
var day = String(date.getDate()).padStart(2, '0')
console.log('%s/%s/%s', month, day, year)
Check
var date = new Date('7/4/2021')
var year = date.getFullYear()
var month = String(date.getMonth() + 1).padStart(2, '0')
var day = String(date.getDate()).padStart(2, '0')
/**
* Expected output: 07/04/2021
*/
console.log('%s/%s/%s', month, day, year)
Polyfill for old browsers
String.prototype.padStart || Object.defineProperty(String.prototype, 'padStart', {
configurable : true,
writable : true,
value : function (targetLength, padString) {
'use strict'
/**
* String.prototype.padStart polyfill
* https://stackoverflow.com/questions/3605214/javascript-add-leading-zeroes-to-date
*/
targetLength = targetLength | 0
padString = arguments.length > 1 ? String(padString) : ' '
if (this.length < targetLength && padString.length) {
targetLength = targetLength - this.length
while (padString.length < targetLength) {
padString += padString
}
return padString.slice(0, targetLength) + this
} else {
return this
}
}
})

var MyDate = new Date();
var MyDateString = '';
MyDate.setDate(MyDate.getDate());
var tempoMonth = (MyDate.getMonth()+1);
var tempoDate = (MyDate.getDate());
if (tempoMonth < 10) tempoMonth = '0' + tempoMonth;
if (tempoDate < 10) tempoDate = '0' + tempoDate;
MyDateString = tempoDate + '/' + tempoMonth + '/' + MyDate.getFullYear();

There is another approach to solve this problem, using slice in JavaScript.
var d = new Date();
var datestring = d.getFullYear() + "-" + ("0"+(d.getMonth()+1)).slice(-2) +"-"+("0" + d.getDate()).slice(-2);
the datestring return date with format as you expect: 2019-09-01
another approach is using dateformat library: https://github.com/felixge/node-dateformat

You could use ternary operator to format the date like an "if" statement.
For example:
var MyDate = new Date();
MyDate.setDate(MyDate.getDate()+10);
var MyDateString = (MyDate.getDate() < 10 ? '0' + MyDate.getDate() : MyDate.getDate()) + '/' + ((d.getMonth()+1) < 10 ? '0' + (d.getMonth()+1) : (d.getMonth()+1)) + '/' + MyDate.getFullYear();
So
(MyDate.getDate() < 10 ? '0' + MyDate.getDate() : MyDate.getDate())
would be similar to an if statement, where if the getDate() returns a value less than 10, then return a '0' + the Date, or else return the date if greater than 10 (since we do not need to add the leading 0). Same for the month.
Edit:
Forgot that getMonth starts with 0, so added the +1 to account for it. Of course you could also just say d.getMonth() < 9 :, but I figured using the +1 would help make it easier to understand.

function formatDate(jsDate){
// add leading zeroes to jsDate when days or months are < 10..
// i.e.
// formatDate(new Date("1/3/2013"));
// returns
// "01/03/2103"
////////////////////
return (jsDate.getDate()<10?("0"+jsDate.getDate()):jsDate.getDate()) + "/" +
((jsDate.getMonth()+1)<10?("0"+(jsDate.getMonth()+1)):(jsDate.getMonth()+1)) + "/" +
jsDate.getFullYear();
}

You can provide options as a parameter to format date. First parameter is for locale which you might not need and second is for options.
For more info visit
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toLocaleDateString
var date = new Date(Date.UTC(2012, 1, 1, 3, 0, 0));
var options = { year: 'numeric', month: '2-digit', day: '2-digit' };
console.log(date.toLocaleDateString(undefined,options));

I wrapped the correct answer of this question in a function that can add multiple leading zero's but defaults to adding 1 zero.
function zeroFill(nr, depth){
depth = (depth === undefined)? 1 : depth;
var zero = "0";
for (var i = 0; i < depth; ++i) {
zero += "0";
}
return (zero + nr).slice(-(depth + 1));
}
for working with numbers only and not more than 2 digits, this is also an approach:
function zeroFill(i) {
return (i < 10 ? '0' : '') + i
}

Another option, using a built-in function to do the padding (but resulting in quite long code!):
myDateString = myDate.getDate().toLocaleString('en-US', {minimumIntegerDigits: 2})
+ '/' + (myDate.getMonth()+1).toLocaleString('en-US', {minimumIntegerDigits: 2})
+ '/' + myDate.getFullYear();
// '12/06/2017'
And another, manipulating strings with regular expressions:
var myDateString = myDate.toISOString().replace(/T.*/, '').replace(/-/g, '/');
// '2017/06/12'
But be aware that one will show the year at the start and the day at the end.

Adding on to #modiX answer, this is what works...DO NOT LEAVE THAT as empty
today.toLocaleDateString("default", {year: "numeric", month: "2-digit", day: "2-digit"})

Here is very simple example how you can handle this situation.
var mydate = new Date();
var month = (mydate.getMonth().toString().length < 2 ? "0"+mydate.getMonth().toString() :mydate.getMonth());
var date = (mydate.getDate().toString().length < 2 ? "0"+mydate.getDate().toString() :mydate.getDate());
var year = mydate.getFullYear();
console.log("Format Y-m-d : ",year+"-"+month+"-" + date);
console.log("Format Y/m/d : ",year+"/"+month+"/" + date);

I think this solution is easier and can be easily remembered:
var MyDate = new Date();
var day = MyDate.getDate() + 10; // 10 days in advance
var month = MyDate.getMonth() + 1; // since months start from 0 we should add 1 to it
var year = MyDate.getFullYear();
day = checkDate(day);
month = checkDate(month);
function checkDate(i){
if(i < 10){
i = '0' + i;
}
return i;
}
console.log(`${month}/${day}/${year}`);

What I would do, is create my own custom Date helper that looks like this :
var DateHelper = {
addDays : function(aDate, numberOfDays) {
aDate.setDate(aDate.getDate() + numberOfDays); // Add numberOfDays
return aDate; // Return the date
},
format : function format(date) {
return [
("0" + date.getDate()).slice(-2), // Get day and pad it with zeroes
("0" + (date.getMonth()+1)).slice(-2), // Get month and pad it with zeroes
date.getFullYear() // Get full year
].join('/'); // Glue the pieces together
}
}
// With this helper, you can now just use one line of readable code to :
// ---------------------------------------------------------------------
// 1. Get the current date
// 2. Add 20 days
// 3. Format it
// 4. Output it
// ---------------------------------------------------------------------
document.body.innerHTML = DateHelper.format(DateHelper.addDays(new Date(), 20));
(see also this Fiddle)

As #John Henckel suggests, starting using the toISOString() method makes things easier
const dateString = new Date().toISOString().split('-');
const year = dateString[0];
const month = dateString[1];
const day = dateString[2].split('T')[0];
console.log(`${year}-${month}-${day}`);

try this for a basic function, no libraries required
Date.prototype.CustomformatDate = function() {
var tmp = new Date(this.valueOf());
var mm = tmp.getMonth() + 1;
if (mm < 10) mm = "0" + mm;
var dd = tmp.getDate();
if (dd < 10) dd = "0" + dd;
return mm + "/" + dd + "/" + tmp.getFullYear();
};

You could simply use :
const d = new Date();
const day = `0${d.getDate()}`.slice(-2);
So a function could be created like :
AddZero(val){
// adding 0 if the value is a single digit
return `0${val}`.slice(-2);
}
Your new code :
var MyDate = new Date();
var MyDateString = new Date();
MyDate.setDate(MyDate.getDate()+10);
MyDateString = AddZero(MyDate.getDate()) + '/' + AddZero(MyDate.getMonth() + 1) + '/' + MyDate.getFullYear();

toISOString can get leading 0
const currentdate = new Date();
const date = new Date(Date.UTC(currentdate.getFullYear(), (currentdate.getMonth()),currentdate.getDate(), currentdate.getHours(), currentdate.getMinutes(), currentdate.getSeconds()));
//you can pass YY, MM, DD //op: 2018-03-01
//i have passed YY, MM, DD, HH, Min, Sec // op : 2021-06-09T12:14:27.000Z
console.log(date.toISOString());
output will be similar to this : 2021-06-09T12:14:27.000Z

const month = date.toLocaleDateString('en-US', { month: '2-digit' });
const day = date.toLocaleDateString('en-US', { day: '2-digit' });
const year = date.getFullYear();
const dateString = `${month}-${day}-${year}`;

The following aims to extract configuration, hook into Date.protoype and apply configuration.
I've used an Array to store time chunks and when I push() this as a Date object, it returns me the length to iterate. When I'm done, I can use join on the return value.
This seems to work pretty fast: 0.016ms
// Date protoype
Date.prototype.formatTime = function (options) {
var i = 0,
time = [],
len = time.push(this.getHours(), this.getMinutes(), this.getSeconds());
for (; i < len; i += 1) {
var tick = time[i];
time[i] = tick < 10 ? options.pad + tick : tick;
}
return time.join(options.separator);
};
// Setup output
var cfg = {
fieldClock: "#fieldClock",
options: {
pad: "0",
separator: ":",
tick: 1000
}
};
// Define functionality
function startTime() {
var clock = $(cfg.fieldClock),
now = new Date().formatTime(cfg.options);
clock.val(now);
setTimeout(startTime, cfg.options.tick);
}
// Run once
startTime();
demo: http://jsfiddle.net/tive/U4MZ3/

Add some padding to allow a leading zero - where needed - and concatenate using your delimiter of choice as string.
Number.prototype.padLeft = function(base,chr){
var len = (String(base || 10).length - String(this).length)+1;
return len > 0? new Array(len).join(chr || '0')+this : this;
}
var d = new Date(my_date);
var dformatted = [(d.getMonth()+1).padLeft(), d.getDate().padLeft(), d.getFullYear()].join('/');

let date = new Date();
let dd = date.getDate();//day of month
let mm = date.getMonth();// month
let yyyy = date.getFullYear();//day of week
if (dd < 10) {//if less then 10 add a leading zero
dd = "0" + dd;
}
if (mm < 10) {
mm = "0" + mm;//if less then 10 add a leading zero
}

function pad(value) {
return value.tostring().padstart(2, 0);
}
let d = new date();
console.log(d);
console.log(`${d.getfullyear()}-${pad(d.getmonth() + 1)}-${pad(d.getdate())}t${pad(d.gethours())}:${pad(d.getminutes())}:${pad(d.getseconds())}`);

You can use String.slice() which extracts a section of a string and returns it as a new string, without modifying the original string:
const currentDate = new Date().toISOString().slice(0, 10) // 2020-04-16
Or you can also use a lib such as Moment.js to format the date:
const moment = require("moment")
const currentDate = moment().format("YYYY-MM-DD") // 2020-04-16

A simple dateformat library saved my life (GitHub):
Node.js: var dateFormat = require("dateformat");
ES6: import dateFormat from "dateformat";
const now = new Date(); // consider 3rd of December 1993
const full = dateFormat(today, "yyyy-mm-dd"); // 1993-12-03
const day = dateFormat(today, "dd"); // 03
const month = dateFormat(today, "mm"); // 12
const year = dateFormat(today, "yyyy"); // 1993
It's worth to mention it supports a wide range of mask options.

Converting date JavaScript

I'm currently populating a table with data from a soap web service, the date comes as a string (example 44250). I created a function to format it into a yyyy/mm/dd format.
Outside the loop I have this function:
Date.prototype.addDays = function (days) {
var date = new Date(this.valueOf());
date.setDate(date.getDate() + days);
return date;
};
Inside the loop I have:
else if (detailsItem == details[i].children[1].innerHTML) {
const dbDays = days[i].innerHTML;
const daysInt = parseInt(dbDays, 0);
const newDate = firstDate.addDays(daysInt);
// Format the date to a readable value
const partsDate = {
date: newDate.getDate(),
month: newDate.getMonth() + 1,
year: newDate.getYear() + 1900,
};
finalDate = `${partsDate.date}/${partsDate.month}/${partsDate.year}`;
const td = document.createElement("td");
td.textContent = finalDate;
tr.appendChild(td);
}
the else if is just checking when to add the date to the table while populating it.
I now need to send a request to the service using the date again but in the previous format, but the date has to be in the same row as the button click, the service only accepts the string format of the date, I'm currently stuck and unsure on how to format it back.
This is the button click function which has to then format the date back to a format such as 44250.
btn.onclick = function () {
// Loops through the table to find the slot and date when clicking the button on the same row
var tableRow = document.getElementById("booking-table"),
rIndex;
for (var i = 0; i < tableRow.rows.length; i++) {
tableRow.rows[i].onclick = function () {
rIndex = this.rowIndex;
bookingDay = this.cells[1].innerHTML;
bookingSlot = this.cells[2].innerHTML;
console.log(bookingSlot, bookingDay);
};
}
Any help on how to accomplish this would be appreciated.

The value "44250" looks like the number of days since 31 Dec 1899 (the epoch), which means a value of "1" converts to 1 Jan 1900. If that's correct, you can create a Date from it using:
let dbDays = '44250';
let date = new Date(1900, 0, dbDays); // 24 Feb 2021
In this algorithm, 1 is 1 Jan 1900 and 0 is 31 Dec 1899.
You can convert it back to an epoch offset using the reverse algorithm:
let dbDays = Math.round((date.getTime() - new Date(1899, 11, 31) / 8.64e7);
Which gets the difference in ms since the date and the epoch, then divides by ms in one day and rounds it to account for possible daylight saving effects where days aren't exactly 24 hours long. This method only works for whole days, it doesn't work for partial days.
The algorithm might be out by a day if 1 Jan 1900 should be 0 rather than 1, just adjust the base dates used in the functions.
Simple functions to go from dbDate to Date instance and back are:
// Convert epoch days to Date
function toDate(dbDays) {
return new Date(1900, 0, +dbDays);
}
// Convert Date to epoch days
function toDBDays(date) {
return Math.round((date - new Date(1899,11,31)) / 8.64e7);
}
// Format date as dd/mm/yyyy
function formatDate(d) {
let z = n => ('0'+n).slice(-2);
return z(d.getDate()) + '/' + z(d.getMonth()+1) + '/' + d.getFullYear();
}
// Parse date in d/m/y format, any non-digit separator
function parseDate(s) {
let [d,m,y] = s.split(/\D/);
return new Date(y, m - 1, d)
}
// Example
let dbDays = '44250';
let d1 = toDate(dbDays); // 24 Feb 2021
let ts = formatDate(d1); // 24/02/2021
let d2 = parseDate(ts); // date object
console.log(dbDays + ' to Date: ' + ts);
console.log(ts + ' to dbDays: ' + toDBDays(d2));
PS Given the epoch won't change, instead of creating a date for 31 Dec 1899 and getting its time value, the constant -2209111200000 can be used.
Notes on your code:
const daysInt = parseInt(dbDays, 0);
The second argument to parseInt is a radix or base to use for conversion to number. The value 0 is replaced with 10 (the default radix), so the above is equivalent to:
const daysInt = parseInt(dbDays, 10);
Then there is:
const partsDate = {
date: newDate.getDate(),
month: newDate.getMonth() + 1,
year: newDate.getYear() + 1900,
};
The getYear method returns a 2 digit year, it's not recommended and is supported mostly for historic reasons, use getFullYear instead.
Using an object for temporary storage is not really optimal, just use variables:
let date = newDate.getDate(),
month = newDate.getMonth() + 1,
year = newDate.getFullYear();
Note that this doesn't pad single digit days or months with leading zeros so will produce timestamps like 1/1/2021 instead of 01/01/2021.

You can use momentjs to convert the date easier: https://momentjs.com/ ,
about the use of the date after you pass that value to the html, can you store that value on some global variable,sesion or localstorage? and then use it later? to call again the soap service? i'm asumming your working on a web page, cause your using html :)

Get ISO date string based on month name

I have to create two ISO date strings in an Array based on the long month name.
Input: 'August'
Output: ['2020-08-01T00:00:00', '2020-08-31T00:00:00']
I am thinking about a switch case to check for each month but I am not sure how to create the ISO string with this information. I could match August with 08 and replace a pre-defined ISO string and replace it based on the input but this doesn't sound very clever.

You can get the month names from toLocaleString for the locale you are in or hardcode an array.
Then calculate the first of this month and the 0th of NEXT month
I had to normalise the time to 15:00 to handle timezones.
const yyyy = new Date().getFullYear();
const months = Array.from(Array(12).keys())
.map(month => new Date(yyyy, month, 5, 15, 0, 0, 0)
.toLocaleString('default', { month: 'long'}) );
const zeroTime = str => `${str.split("T")[0]}T00:00:00`;
const getDates = month => {
const monthNum = months.indexOf(month);
const start = new Date(yyyy, monthNum, 1, 15, 0, 0, 0),
end = new Date(yyyy, monthNum+1, 0, 15, 0, 0, 0)
return [zeroTime(start.toISOString()), zeroTime(end.toISOString())];
};
console.log(getDates("August"))

There are many ways to go about this, the only real issue is how to generate the list of month names. The following uses mplungian's approach of generating them in the browser default language, though I'm not sure that's a good idea.
The other part of the problem is to generate timestamps for the start and end of the month. That's pretty simple given a year and month number. You can use UTC values and toISOString, then trim the trailing Z to get local timestamps.
The following should be efficient as it only generates one date and array to get the month names, then one more of each on each call of getMonthDates. It also uses for loops instead of creating arrays and using array methods for iteration.
It also provides separate functions for getting the month number from the name and dates from month number and year. They use ECMAScript month number (0 = Jan, etc.) but could easily be converted to use calendar month number (1 = Jan, etc.).
// Given year and ECMAScript month number, return an array of ISO 8601
// formatted local timestamps for first and last days of the month
let getMonthDates = (monthNum = 0, year = new Date().getFullYear()) => {
let date = new Date(Date.UTC(year, monthNum));
let start = date.toISOString().substring(0, 19);
date.setUTCMonth(monthNum + 1, 0);
return [start, date.toISOString().substring(0, 19)];
}
// Given a month name, return it's ECMAScript month number
// Uses host default language for month name
let getMonthDatesFromName = (() => {
let date = new Date();
let monthNames = (() => {
date.setMonth(0, 1);
for (var arr=[], i=0; i<12; i++) {
arr.push(date.toLocaleString('default',{month:'long'}));
date.setMonth(i+1)
}
return arr;
})();
return (monthName, year) => {
let monthNum = monthNames.indexOf(monthName);
// If month name not found, return undefined
return monthNum < 0? void 0 : getMonthDates(monthNum, year);
}
})();
/** getMonthDatesFromName examples
*/
// Undefined if month name not valid
console.log('foo: ' + getMonthDatesFromName('foo'));
// Current month name
let monthName = new Date().toLocaleString('default',{month: 'long'});
console.log(monthName + ': ' + getMonthDatesFromName(monthName).toString());
// February, 2024
console.log('February, 2024: ' + getMonthDatesFromName('February', 2024).toString());
/** getMonthDates examples
*/
// January of current year by default
console.log('Default: ' + getMonthDates().toString());
// Month of current year by default, e.g. for April
console.log('April: ' + getMonthDates(3).toString());
// Month and year - February 2024
console.log('1, 2024: ' + getMonthDates(1, 2024).toString());

How to parse date string in jQuery and check if it is in the past

I need to check if the date is in the past. This is what I have so far. JSfiddle here.
var date = "09/12/2013";
var d = new Date();
var month = d.getMonth() + 1;
var day = d.getDate();
var todaysDate = +(('' + day).length < 2 ? '0' : '') + day + '/' + (('' + month).length < 2 ? '0' : '') + month + '/' + d.getFullYear();
if (date < todaysDate) {
alert("in the past");
} else {
alert("in the future");
}
Currently it is saying that the date was in the past, when it should be in the future. I know I need to parse the string as a date, but not sure how.
Help?

With that input format, you can't use a string comparison, because the least significant values are on the left. Note: I'm assuing that date is December 9th, 2013. If you're doing the American thing where it's September 12th, 2013, you'll have to adjust the indexes into parts below.
You could reverse the fields:
var date = "09/12/2013";
var parts = date.split('/');
date = parts[2] + "/" + parts[1] + "/" + parts[0];
...and then do your string comparison (being sure to construct the string for "today" in the same order — year/month/day).
If you're going to do that, you could go ahead and finish the job
var date = "09/12/2013";
var parts = date.split('/');
var date = new Date(parseInt(parts[2], 10), // year
parseInt(parts[1], 10) - 1, // month, starts with 0
parseInt(parts[0], 10)); // day
if (date < new Date()) {
// It's in the past, including one millisecond ago
}
...but of course, if you don't want the expression to be true for one millisecond ago, your string approach is fine.

var date = new Date("09/12/2013");
var d = new Date();
console.log(date>d); // true
var date = new Date("09/12/2011");
console.log(date>d); // false

JavaScript's native Date comparator only works on Date objects, whereas you are comparing Strings. You should parse date into a Date object, and then compare it with d.
//define parse(string) --> Date
if(parse(date) < new Date()) {
alert('past');
} else {
alert('future');
}

Javascript add leading zeroes to date

I've created this script to calculate the date for 10 days in advance in the format of dd/mm/yyyy:
var MyDate = new Date();
var MyDateString = new Date();
MyDate.setDate(MyDate.getDate()+10);
MyDateString = MyDate.getDate() + '/' + (MyDate.getMonth()+1) + '/' + MyDate.getFullYear();
I need to have the date appear with leading zeroes on the day and month component by way of adding these rules to the script. I can't seem to get it to work.
if (MyDate.getMonth < 10)getMonth = '0' + getMonth;
and
if (MyDate.getDate <10)get.Date = '0' + getDate;
If someone could show me where to insert these into the script I would be really appreciative.

Try this: http://jsfiddle.net/xA5B7/
var MyDate = new Date();
var MyDateString;
MyDate.setDate(MyDate.getDate() + 20);
MyDateString = ('0' + MyDate.getDate()).slice(-2) + '/'
+ ('0' + (MyDate.getMonth()+1)).slice(-2) + '/'
+ MyDate.getFullYear();
EDIT:
To explain, .slice(-2) gives us the last two characters of the string.
So no matter what, we can add "0" to the day or month, and just ask for the last two since those are always the two we want.
So if the MyDate.getMonth() returns 9, it will be:
("0" + "9") // Giving us "09"
so adding .slice(-2) on that gives us the last two characters which is:
("0" + "9").slice(-2)
"09"
But if MyDate.getMonth() returns 10, it will be:
("0" + "10") // Giving us "010"
so adding .slice(-2) gives us the last two characters, or:
("0" + "10").slice(-2)
"10"

The modern way
The new modern way to do this is to use toLocaleDateString, because it allows you not only to format a date with proper localization, but even to pass format options to achieve the desired result:
const date = new Date(2018, 2, 1)
const result = date.toLocaleDateString("en-GB", { // you can use undefined as first argument
year: "numeric",
month: "2-digit",
day: "2-digit",
})
console.log(result) // outputs “01/03/2018”
Or using a Temporal object (still in proposal, caniuse):
const date = new Temporal.PlainDate(2018, 3, 1) // also works with zoned date
const result = date.toLocaleString("en-GB", { // you can use undefined as first argument
year: "numeric",
month: "2-digit",
day: "2-digit",
})
console.log(result) // outputs “01/03/2018”
When you use undefined as the first argument it will detect the browser language, instead. Alternatively, you can use 2-digit on the year option, too.
Performance
If you plan to format a lot of dates, you should consider using Intl.DateTimeFormat instead:
const formatter = new Intl.DateTimeFormat("en-GB", { // <- re-use me
year: "numeric",
month: "2-digit",
day: "2-digit",
})
const date = new Date(2018, 2, 1) // can also be a Temporal object
const result = formatter.format(date)
console.log(result) // outputs “01/03/2018”
The formatter is compatible with Date and Temporal objects.
Historical dates
Unlike in the Temporal constructor years between 0 and 99 will be interpreted as 20th century years on the Date constructor. To prevent this, initialize the date like so:
const date = new Date()
date.setFullYear(18, 2, 1) // the year is A.D. 18
This is not required for Temporal objects, but years below 1000 will not contain leading zeros in all cases, because the formatter (that is shared for the Date and Temporal API) does not support 4-digit formatting at all. In this case you have to do manual formatting (see below).
For the ISO 8601 format
If you want to get your date in the YYYY-MM-DD format (ISO 8601), the solution looks different:
const date = new Date(Date.UTC(2018, 2, 1))
const result = date.toISOString().split('T')[0]
console.log(result) // outputs “2018-03-01”
Your input date should be in the UTC format or toISOString() will fix that for you. This is done by using Date.UTC as shown above.
Historical dates for the ISO 8601 format
Unlike in the Temporal constructor years between 0 and 99 will be interpreted as 20th century years on the Date constructor. To prevent this, initialize the date like so to be used for the ISO 8601 format:
const date = new Date()
date.setUTCFullYear(18, 2, 1) // the year is A.D. 18
Note that the ISO format for Temporal objects with dates before the year 1000 or after the year 9999 will have a different formatting compared to the legacy Date API. It is recommend to fallback to custom formatting to enforce 4 digit years in all circumstances.
Custom 4-digit formatting on the year
Sadly, the formatter doesn't support leading zeros on the year. There is no 4-digit option. This will remain for Temporal objects as well, because they do share the same formatter.
Fortunately, the ISO format of the Date API will always display at least 4 digits on the year, although Temporal objects do not. So at least for the Date API you can format historical dates before the year 1000 with leading zeros by falling back to a manual formatting approach using part of the ISO 8601 format method:
const date = new Date()
date.setUTCFullYear(18, 2, 1)
const ymd = date.toISOString().split('T')[0].split('-')
const result = `${ymd[2]}/${ymd[1]}/${ymd[0]}`
console.log(result) // outputs “01/03/0018”
For a Temporal object a different route is necessary, since the ISOYearString will be formatted differently for dates before the year 1000 and after the year 9999 as mentioned before:
const date = new Temporal.PlainDate(2018, 3, 1) // also works with zoned date
const zeroPad = (n, digits) => n.toString().padStart(digits, '0');
const result = `${zeroPad(date.day, 2)}/${zeroPad(date.month, 2)}/${zeroPad(date.year, 4)}`;
console.log(result) // outputs “01/03/0018”
Miscellaneous
For the Date and Temporal API there is also toLocaleTimeString, that allows you to localize and format the time of a date.

Here is an example from the Date object docs on the Mozilla Developer Network using a custom "pad" function, without having to extend Javascript's Number prototype. The handy function they give as an example is
function pad(n){return n<10 ? '0'+n : n}
And below is it being used in context.
/* use a function for the exact format desired... */
function ISODateString(d){
function pad(n){return n<10 ? '0'+n : n}
return d.getUTCFullYear()+'-'
+ pad(d.getUTCMonth()+1)+'-'
+ pad(d.getUTCDate())+'T'
+ pad(d.getUTCHours())+':'
+ pad(d.getUTCMinutes())+':'
+ pad(d.getUTCSeconds())+'Z'
}
var d = new Date();
console.log(ISODateString(d)); // prints something like 2009-09-28T19:03:12Z

For you people from the future (ECMAScript 2017 and beyond)
Solution
"use strict"
const today = new Date()
const year = today.getFullYear()
const month = `${today.getMonth() + 1}`.padStart(2, "0")
const day = `${today.getDate()}`.padStart(2, "0")
const stringDate = [day, month, year].join("/") // 13/12/2017
Explaination
the String.prototype.padStart(targetLength[, padString]) adds as many as possible padString in the String.prototype target so that the new length of the target is targetLength.
Example
"use strict"
let month = "9"
month = month.padStart(2, "0") // "09"
let byte = "00000100"
byte = byte.padStart(8, "0") // "00000100"

You can define a "str_pad" function (as in php):
function str_pad(n) {
return String("00" + n).slice(-2);
}

I found the shorterst way to do this:
MyDateString.replace(/(^|\D)(\d)(?!\d)/g, '$10$2');
will add leading zeros to all lonely, single digits

Number.prototype.padZero= function(len){
var s= String(this), c= '0';
len= len || 2;
while(s.length < len) s= c + s;
return s;
}
//in use:
(function(){
var myDate= new Date(), myDateString;
myDate.setDate(myDate.getDate()+10);
myDateString= [myDate.getDate().padZero(),
(myDate.getMonth()+1).padZero(),
myDate.getFullYear()].join('/');
alert(myDateString);
})()
/* value: (String)
09/09/2010
*/

Nowadays you can also utilize String.prototype.padStart to reach the goal in quick and easy way
String(new Date().getMonth() + 1).padStart(2, '0')
The availability can be assessed at caniuse
var date = new Date()
var year = date.getFullYear()
var month = String(date.getMonth() + 1).padStart(2, '0')
var day = String(date.getDate()).padStart(2, '0')
console.log('%s/%s/%s', month, day, year)
Check
var date = new Date('7/4/2021')
var year = date.getFullYear()
var month = String(date.getMonth() + 1).padStart(2, '0')
var day = String(date.getDate()).padStart(2, '0')
/**
* Expected output: 07/04/2021
*/
console.log('%s/%s/%s', month, day, year)
Polyfill for old browsers
String.prototype.padStart || Object.defineProperty(String.prototype, 'padStart', {
configurable : true,
writable : true,
value : function (targetLength, padString) {
'use strict'
/**
* String.prototype.padStart polyfill
* https://stackoverflow.com/questions/3605214/javascript-add-leading-zeroes-to-date
*/
targetLength = targetLength | 0
padString = arguments.length > 1 ? String(padString) : ' '
if (this.length < targetLength && padString.length) {
targetLength = targetLength - this.length
while (padString.length < targetLength) {
padString += padString
}
return padString.slice(0, targetLength) + this
} else {
return this
}
}
})

var MyDate = new Date();
var MyDateString = '';
MyDate.setDate(MyDate.getDate());
var tempoMonth = (MyDate.getMonth()+1);
var tempoDate = (MyDate.getDate());
if (tempoMonth < 10) tempoMonth = '0' + tempoMonth;
if (tempoDate < 10) tempoDate = '0' + tempoDate;
MyDateString = tempoDate + '/' + tempoMonth + '/' + MyDate.getFullYear();

There is another approach to solve this problem, using slice in JavaScript.
var d = new Date();
var datestring = d.getFullYear() + "-" + ("0"+(d.getMonth()+1)).slice(-2) +"-"+("0" + d.getDate()).slice(-2);
the datestring return date with format as you expect: 2019-09-01
another approach is using dateformat library: https://github.com/felixge/node-dateformat

You could use ternary operator to format the date like an "if" statement.
For example:
var MyDate = new Date();
MyDate.setDate(MyDate.getDate()+10);
var MyDateString = (MyDate.getDate() < 10 ? '0' + MyDate.getDate() : MyDate.getDate()) + '/' + ((d.getMonth()+1) < 10 ? '0' + (d.getMonth()+1) : (d.getMonth()+1)) + '/' + MyDate.getFullYear();
So
(MyDate.getDate() < 10 ? '0' + MyDate.getDate() : MyDate.getDate())
would be similar to an if statement, where if the getDate() returns a value less than 10, then return a '0' + the Date, or else return the date if greater than 10 (since we do not need to add the leading 0). Same for the month.
Edit:
Forgot that getMonth starts with 0, so added the +1 to account for it. Of course you could also just say d.getMonth() < 9 :, but I figured using the +1 would help make it easier to understand.

function formatDate(jsDate){
// add leading zeroes to jsDate when days or months are < 10..
// i.e.
// formatDate(new Date("1/3/2013"));
// returns
// "01/03/2103"
////////////////////
return (jsDate.getDate()<10?("0"+jsDate.getDate()):jsDate.getDate()) + "/" +
((jsDate.getMonth()+1)<10?("0"+(jsDate.getMonth()+1)):(jsDate.getMonth()+1)) + "/" +
jsDate.getFullYear();
}

You can provide options as a parameter to format date. First parameter is for locale which you might not need and second is for options.
For more info visit
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toLocaleDateString
var date = new Date(Date.UTC(2012, 1, 1, 3, 0, 0));
var options = { year: 'numeric', month: '2-digit', day: '2-digit' };
console.log(date.toLocaleDateString(undefined,options));

I wrapped the correct answer of this question in a function that can add multiple leading zero's but defaults to adding 1 zero.
function zeroFill(nr, depth){
depth = (depth === undefined)? 1 : depth;
var zero = "0";
for (var i = 0; i < depth; ++i) {
zero += "0";
}
return (zero + nr).slice(-(depth + 1));
}
for working with numbers only and not more than 2 digits, this is also an approach:
function zeroFill(i) {
return (i < 10 ? '0' : '') + i
}

Another option, using a built-in function to do the padding (but resulting in quite long code!):
myDateString = myDate.getDate().toLocaleString('en-US', {minimumIntegerDigits: 2})
+ '/' + (myDate.getMonth()+1).toLocaleString('en-US', {minimumIntegerDigits: 2})
+ '/' + myDate.getFullYear();
// '12/06/2017'
And another, manipulating strings with regular expressions:
var myDateString = myDate.toISOString().replace(/T.*/, '').replace(/-/g, '/');
// '2017/06/12'
But be aware that one will show the year at the start and the day at the end.

Adding on to #modiX answer, this is what works...DO NOT LEAVE THAT as empty
today.toLocaleDateString("default", {year: "numeric", month: "2-digit", day: "2-digit"})

Here is very simple example how you can handle this situation.
var mydate = new Date();
var month = (mydate.getMonth().toString().length < 2 ? "0"+mydate.getMonth().toString() :mydate.getMonth());
var date = (mydate.getDate().toString().length < 2 ? "0"+mydate.getDate().toString() :mydate.getDate());
var year = mydate.getFullYear();
console.log("Format Y-m-d : ",year+"-"+month+"-" + date);
console.log("Format Y/m/d : ",year+"/"+month+"/" + date);

I think this solution is easier and can be easily remembered:
var MyDate = new Date();
var day = MyDate.getDate() + 10; // 10 days in advance
var month = MyDate.getMonth() + 1; // since months start from 0 we should add 1 to it
var year = MyDate.getFullYear();
day = checkDate(day);
month = checkDate(month);
function checkDate(i){
if(i < 10){
i = '0' + i;
}
return i;
}
console.log(`${month}/${day}/${year}`);

What I would do, is create my own custom Date helper that looks like this :
var DateHelper = {
addDays : function(aDate, numberOfDays) {
aDate.setDate(aDate.getDate() + numberOfDays); // Add numberOfDays
return aDate; // Return the date
},
format : function format(date) {
return [
("0" + date.getDate()).slice(-2), // Get day and pad it with zeroes
("0" + (date.getMonth()+1)).slice(-2), // Get month and pad it with zeroes
date.getFullYear() // Get full year
].join('/'); // Glue the pieces together
}
}
// With this helper, you can now just use one line of readable code to :
// ---------------------------------------------------------------------
// 1. Get the current date
// 2. Add 20 days
// 3. Format it
// 4. Output it
// ---------------------------------------------------------------------
document.body.innerHTML = DateHelper.format(DateHelper.addDays(new Date(), 20));
(see also this Fiddle)

As #John Henckel suggests, starting using the toISOString() method makes things easier
const dateString = new Date().toISOString().split('-');
const year = dateString[0];
const month = dateString[1];
const day = dateString[2].split('T')[0];
console.log(`${year}-${month}-${day}`);

try this for a basic function, no libraries required
Date.prototype.CustomformatDate = function() {
var tmp = new Date(this.valueOf());
var mm = tmp.getMonth() + 1;
if (mm < 10) mm = "0" + mm;
var dd = tmp.getDate();
if (dd < 10) dd = "0" + dd;
return mm + "/" + dd + "/" + tmp.getFullYear();
};

You could simply use :
const d = new Date();
const day = `0${d.getDate()}`.slice(-2);
So a function could be created like :
AddZero(val){
// adding 0 if the value is a single digit
return `0${val}`.slice(-2);
}
Your new code :
var MyDate = new Date();
var MyDateString = new Date();
MyDate.setDate(MyDate.getDate()+10);
MyDateString = AddZero(MyDate.getDate()) + '/' + AddZero(MyDate.getMonth() + 1) + '/' + MyDate.getFullYear();

toISOString can get leading 0
const currentdate = new Date();
const date = new Date(Date.UTC(currentdate.getFullYear(), (currentdate.getMonth()),currentdate.getDate(), currentdate.getHours(), currentdate.getMinutes(), currentdate.getSeconds()));
//you can pass YY, MM, DD //op: 2018-03-01
//i have passed YY, MM, DD, HH, Min, Sec // op : 2021-06-09T12:14:27.000Z
console.log(date.toISOString());
output will be similar to this : 2021-06-09T12:14:27.000Z

const month = date.toLocaleDateString('en-US', { month: '2-digit' });
const day = date.toLocaleDateString('en-US', { day: '2-digit' });
const year = date.getFullYear();
const dateString = `${month}-${day}-${year}`;

The following aims to extract configuration, hook into Date.protoype and apply configuration.
I've used an Array to store time chunks and when I push() this as a Date object, it returns me the length to iterate. When I'm done, I can use join on the return value.
This seems to work pretty fast: 0.016ms
// Date protoype
Date.prototype.formatTime = function (options) {
var i = 0,
time = [],
len = time.push(this.getHours(), this.getMinutes(), this.getSeconds());
for (; i < len; i += 1) {
var tick = time[i];
time[i] = tick < 10 ? options.pad + tick : tick;
}
return time.join(options.separator);
};
// Setup output
var cfg = {
fieldClock: "#fieldClock",
options: {
pad: "0",
separator: ":",
tick: 1000
}
};
// Define functionality
function startTime() {
var clock = $(cfg.fieldClock),
now = new Date().formatTime(cfg.options);
clock.val(now);
setTimeout(startTime, cfg.options.tick);
}
// Run once
startTime();
demo: http://jsfiddle.net/tive/U4MZ3/

Add some padding to allow a leading zero - where needed - and concatenate using your delimiter of choice as string.
Number.prototype.padLeft = function(base,chr){
var len = (String(base || 10).length - String(this).length)+1;
return len > 0? new Array(len).join(chr || '0')+this : this;
}
var d = new Date(my_date);
var dformatted = [(d.getMonth()+1).padLeft(), d.getDate().padLeft(), d.getFullYear()].join('/');

let date = new Date();
let dd = date.getDate();//day of month
let mm = date.getMonth();// month
let yyyy = date.getFullYear();//day of week
if (dd < 10) {//if less then 10 add a leading zero
dd = "0" + dd;
}
if (mm < 10) {
mm = "0" + mm;//if less then 10 add a leading zero
}

function pad(value) {
return value.tostring().padstart(2, 0);
}
let d = new date();
console.log(d);
console.log(`${d.getfullyear()}-${pad(d.getmonth() + 1)}-${pad(d.getdate())}t${pad(d.gethours())}:${pad(d.getminutes())}:${pad(d.getseconds())}`);

You can use String.slice() which extracts a section of a string and returns it as a new string, without modifying the original string:
const currentDate = new Date().toISOString().slice(0, 10) // 2020-04-16
Or you can also use a lib such as Moment.js to format the date:
const moment = require("moment")
const currentDate = moment().format("YYYY-MM-DD") // 2020-04-16

A simple dateformat library saved my life (GitHub):
Node.js: var dateFormat = require("dateformat");
ES6: import dateFormat from "dateformat";
const now = new Date(); // consider 3rd of December 1993
const full = dateFormat(today, "yyyy-mm-dd"); // 1993-12-03
const day = dateFormat(today, "dd"); // 03
const month = dateFormat(today, "mm"); // 12
const year = dateFormat(today, "yyyy"); // 1993
It's worth to mention it supports a wide range of mask options.

Categories