Related
How to detect the Internet connection is offline in JavaScript?
Almost all major browsers now support the window.navigator.onLine property, and the corresponding online and offline window events. Run the following code snippet to test it:
console.log('Initially ' + (window.navigator.onLine ? 'on' : 'off') + 'line');
window.addEventListener('online', () => console.log('Became online'));
window.addEventListener('offline', () => console.log('Became offline'));
document.getElementById('statusCheck').addEventListener('click', () => console.log('window.navigator.onLine is ' + window.navigator.onLine));
<button id="statusCheck">Click to check the <tt>window.navigator.onLine</tt> property</button><br /><br />
Check the console below for results:
Try setting your system or browser in offline/online mode and check the log or the window.navigator.onLine property for the value changes.
Note however this quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. Until Firefox 41, all other conditions return a true value; since Firefox 41, on OS X and Windows, the value will follow the actual network connectivity.
(emphasis is my own)
This means that if window.navigator.onLine is false (or you get an offline event), you are guaranteed to have no Internet connection.
If it is true however (or you get an online event), it only means the system is connected to some network, at best. It does not mean that you have Internet access for example. To check that, you will still need to use one of the solutions described in the other answers.
I initially intended to post this as an update to Grant Wagner's answer, but it seemed too much of an edit, especially considering that the 2014 update was already not from him.
You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
Sidenote: To put the entire application in an "offline" state may lead to a lot of error-prone work of handling state.. wireless connections may come and go, etc. So your best bet may be to just fail gracefully, preserve the data, and alert the user.. allowing them to eventually fix the connection problem if there is one, and to continue using your app with a fair amount of forgiveness.
Sidenote: You could check a reliable site like google for connectivity, but this may not be entirely useful as just trying to make your own request, because while Google may be available, your own application may not be, and you're still going to have to handle your own connection problem. Trying to send a ping to google would be a good way to confirm that the internet connection itself is down, so if that information is useful to you, then it might be worth the trouble.
Sidenote: Sending a Ping could be achieved in the same way that you would make any kind of two-way ajax request, but sending a ping to google, in this case, would pose some challenges. First, we'd have the same cross-domain issues that are typically encountered in making Ajax communications. One option is to set up a server-side proxy, wherein we actually ping google (or whatever site), and return the results of the ping to the app. This is a catch-22 because if the internet connection is actually the problem, we won't be able to get to the server, and if the connection problem is only on our own domain, we won't be able to tell the difference. Other cross-domain techniques could be tried, for example, embedding an iframe in your page which points to google.com, and then polling the iframe for success/failure (examine the contents, etc). Embedding an image may not really tell us anything, because we need a useful response from the communication mechanism in order to draw a good conclusion about what's going on. So again, determining the state of the internet connection as a whole may be more trouble than it's worth. You'll have to weight these options out for your specific app.
IE 8 will support the window.navigator.onLine property.
But of course that doesn't help with other browsers or operating systems. I predict other browser vendors will decide to provide that property as well given the importance of knowing online/offline status in Ajax applications.
Until that happens, either XHR or an Image() or <img> request can provide something close to the functionality you want.
Update (2014/11/16)
Major browsers now support this property, but your results will vary.
Quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. All other conditions return a true value.
if(navigator.onLine){
alert('online');
} else {
alert('offline');
}
There are a number of ways to do this:
AJAX request to your own website. If that request fails, there's a good chance it's the connection at fault. The JQuery documentation has a section on handling failed AJAX requests. Beware of the Same Origin Policy when doing this, which may stop you from accessing sites outside your domain.
You could put an onerror in an img, like <img src="http://www.example.com/singlepixel.gif" onerror="alert('Connection dead');" />.
This method could also fail if the source image is moved / renamed, and would generally be an inferior choice to the ajax option.
So there are several different ways to try and detect this, none perfect, but in the absence of the ability to jump out of the browser sandbox and access the user's net connection status directly, they seem to be the best options.
As olliej said, using the navigator.onLine browser property is preferable than sending network requests and, accordingly with developer.mozilla.org/En/Online_and_offline_events, it is even supported by old versions of Firefox and IE.
Recently, the WHATWG has specified the addition of the online and offline events, in case you need to react on navigator.onLine changes.
Please also pay attention to the link posted by Daniel Silveira which points out that relying on those signal/property for syncing with the server is not always a good idea.
You can use $.ajax()'s error callback, which fires if the request fails. If textStatus equals the string "timeout" it probably means connection is broken:
function (XMLHttpRequest, textStatus, errorThrown) {
// typically only one of textStatus or errorThrown
// will have info
this; // the options for this ajax request
}
From the doc:
Error: A function to be called if the request
fails. The function is passed three
arguments: The XMLHttpRequest object,
a string describing the type of error
that occurred and an optional
exception object, if one occurred.
Possible values for the second
argument (besides null) are "timeout",
"error", "notmodified" and
"parsererror". This is an Ajax Event
So for example:
$.ajax({
type: "GET",
url: "keepalive.php",
success: function(msg){
alert("Connection active!")
},
error: function(XMLHttpRequest, textStatus, errorThrown) {
if(textStatus == 'timeout') {
alert('Connection seems dead!');
}
}
});
window.navigator.onLine
is what you looking for, but few things here to add, first, if it's something on your app which you want to keep checking (like to see if the user suddenly go offline, which correct in this case most of the time, then you need to listen to change also), for that you add event listener to window to detect any change, for checking if the user goes offline, you can do:
window.addEventListener("offline",
()=> console.log("No Internet")
);
and for checking if online:
window.addEventListener("online",
()=> console.log("Connected Internet")
);
The HTML5 Application Cache API specifies navigator.onLine, which is currently available in the IE8 betas, WebKit (eg. Safari) nightlies, and is already supported in Firefox 3
I had to make a web app (ajax based) for a customer who works a lot with schools, these schools have often a bad internet connection I use this simple function to detect if there is a connection, works very well!
I use CodeIgniter and Jquery:
function checkOnline() {
setTimeout("doOnlineCheck()", 20000);
}
function doOnlineCheck() {
//if the server can be reached it returns 1, other wise it times out
var submitURL = $("#base_path").val() + "index.php/menu/online";
$.ajax({
url : submitURL,
type : "post",
dataType : "msg",
timeout : 5000,
success : function(msg) {
if(msg==1) {
$("#online").addClass("online");
$("#online").removeClass("offline");
} else {
$("#online").addClass("offline");
$("#online").removeClass("online");
}
checkOnline();
},
error : function() {
$("#online").addClass("offline");
$("#online").removeClass("online");
checkOnline();
}
});
}
an ajax call to your domain is the easiest way to detect if you are offline
$.ajax({
type: "HEAD",
url: document.location.pathname + "?param=" + new Date(),
error: function() { return false; },
success: function() { return true; }
});
this is just to give you the concept, it should be improved.
E.g. error=404 should still mean that you online
I know this question has already been answered but i will like to add my 10 cents explaining what's better and what's not.
Window.navigator.onLine
I noticed some answers spoke about this option but they never mentioned anything concerning the caveat.
This option involves the use of "window.navigator.onLine" which is a property under Browser Navigator Interface available on most modern browsers. It is really not a viable option for checking internet availability because firstly it is browser centric and secondly most browsers implement this property differently.
In Firefox: The property returns a boolean value, with true meaning online and false meaning offline but the caveat here is that
"the value is only updated when the user follows links or when a script requests a remote page." Hence if the user goes offline and
you query the property from a js function or script, the property will
always return true until the user follows a link.
In Chrome and Safari: If the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other
conditions return true. So while you can assume that the browser is
offline when it returns a false value, you cannot assume that a true
value necessarily means that the browser can access the internet. You
could be getting false positives, such as in cases where the computer
is running a virtualization software that has virtual ethernet
adapters that are always "connected".
The statements above is simply trying to let you know that browsers alone cannot tell. So basically this option is unreliable.
Sending Request to Own Server Resource
This involves making HTTP request to your own server resource and if reachable assume internet availability else the user is offline. There are some few caveats to this option.
No server availability is 100% reliant, hence if for some reason your server is not reachable it would be falsely assumed that the user is offline whereas they're connected to the internet.
Multiple request to same resource can return cached response making the http response result unreliable.
If you agree your server is always online then you can go with this option.
Here is a simple snippet to fetch own resource:
// This fetches your website's favicon, so replace path with favicon url
// Notice the appended date param which helps prevent browser caching.
fetch('/favicon.ico?d='+Date.now())
.then(response => {
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely assume the user has connection to the internet
console.log("Internet connection available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
Sending Request to Third-Party Server Resource
We all know CORS is a thing.
This option involves making HTTP request to an external server resource and if reachable assume internet availability else the user is offline. The major caveat to this is the Cross-origin resource sharing which act as a limitation. Most reputable websites blocks CORS requests but for some you can have your way.
Below a simple snippet to fetch external resource, same as above but with external resource url:
// Firstly you trigger a resource available from a reputable site
// For demo purpose you can use the favicon from MSN website
// Also notice the appended date param which helps skip browser caching.
fetch('https://static-global-s-msn-com.akamaized.net/hp-neu/sc/2b/a5ea21.ico?d='+Date.now())
.then(response => {
// Check if the response is successful
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely say the user has connection to the internet
console.log("Internet available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
So, Finally for my personal project i went with the 2nd option which involves requesting own server resource because basically there are many factors to tell if there is "Internet Connection" on a user's device, not just from your website container alone nor from a limited browser api.
Remember your users can also be in an environment where some websites or resources are blocked, prohibited and not accessible which in turn affects the logic of connectivity check. The best bet will be:
Try to access a resource on your own server because this is your users environment (Typically i use website's favicon because the response is very light and it is not frequently updated).
If there is no connection to the resource, simply say "Error in connection" or "Connection lost" when you need to notify the user rather than assume a broad "No internet connection" which depends on many factors.
I think it is a very simple way.
var x = confirm("Are you sure you want to submit?");
if (x) {
if (navigator.onLine == true) {
return true;
}
alert('Internet connection is lost');
return false;
}
return false;
The problem of some methods like navigator.onLine is that they are not compatible with some browsers and mobile versions, an option that helped me a lot was to use the classic XMLHttpRequest method and also foresee the possible case that the file was stored in cache with response XMLHttpRequest.status is greater than 200 and less than 304.
Here is my code:
var xhr = new XMLHttpRequest();
//index.php is in my web
xhr.open('HEAD', 'index.php', true);
xhr.send();
xhr.addEventListener("readystatechange", processRequest, false);
function processRequest(e) {
if (xhr.readyState == 4) {
//If you use a cache storage manager (service worker), it is likely that the
//index.php file will be available even without internet, so do the following validation
if (xhr.status >= 200 && xhr.status < 304) {
console.log('On line!');
} else {
console.log('Offline :(');
}
}
}
I was looking for a client-side solution to detect if the internet was down or my server was down. The other solutions I found always seemed to be dependent on a 3rd party script file or image, which to me didn't seem like it would stand the test of time. An external hosted script or image could change in the future and cause the detection code to fail.
I've found a way to detect it by looking for an xhrStatus with a 404 code. In addition, I use JSONP to bypass the CORS restriction. A status code other than 404 shows the internet connection isn't working.
$.ajax({
url: 'https://www.bing.com/aJyfYidjSlA' + new Date().getTime() + '.html',
dataType: 'jsonp',
timeout: 5000,
error: function(xhr) {
if (xhr.status == 404) {
//internet connection working
}
else {
//internet is down (xhr.status == 0)
}
}
});
How about sending an opaque http request to google.com with no-cors?
fetch('https://google.com', {
method: 'GET', // *GET, POST, PUT, DELETE, etc.
mode: 'no-cors',
}).then((result) => {
console.log(result)
}).catch(e => {
console.error(e)
})
The reason for setting no-cors is that I was receiving cors errors even when disbaling the network connection on my pc. So I was getting cors blocked with or without an internet connection. Adding the no-cors makes the request opaque which apperantly seems to bypass cors and allows me to just simply check if I can connect to Google.
FYI: Im using fetch here for making the http request.
https://www.npmjs.com/package/fetch
My way.
<!-- the file named "tt.jpg" should exist in the same directory -->
<script>
function testConnection(callBack)
{
document.getElementsByTagName('body')[0].innerHTML +=
'<img id="testImage" style="display: none;" ' +
'src="tt.jpg?' + Math.random() + '" ' +
'onerror="testConnectionCallback(false);" ' +
'onload="testConnectionCallback(true);">';
testConnectionCallback = function(result){
callBack(result);
var element = document.getElementById('testImage');
element.parentNode.removeChild(element);
}
}
</script>
<!-- usage example -->
<script>
function myCallBack(result)
{
alert(result);
}
</script>
<a href=# onclick=testConnection(myCallBack);>Am I online?</a>
request head in request error
$.ajax({
url: /your_url,
type: "POST or GET",
data: your_data,
success: function(result){
//do stuff
},
error: function(xhr, status, error) {
//detect if user is online and avoid the use of async
$.ajax({
type: "HEAD",
url: document.location.pathname,
error: function() {
//user is offline, do stuff
console.log("you are offline");
}
});
}
});
Just use navigator.onLine if this is true then you're online else offline
You can try this will return true if network connected
function isInternetConnected(){return navigator.onLine;}
Here is a snippet of a helper utility I have. This is namespaced javascript:
network: function() {
var state = navigator.onLine ? "online" : "offline";
return state;
}
You should use this with method detection else fire off an 'alternative' way of doing this. The time is fast approaching when this will be all that is needed. The other methods are hacks.
There are 2 answers forthis for two different senarios:-
If you are using JavaScript on a website(i.e; or any front-end part)
The simplest way to do it is:
<h2>The Navigator Object</h2>
<p>The onLine property returns true if the browser is online:</p>
<p id="demo"></p>
<script>
document.getElementById("demo").innerHTML = "navigator.onLine is " + navigator.onLine;
</script>
But if you're using js on server side(i.e; node etc.), You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
I send JSON requests one by one to the nodejs server. After 6th request, server can't reply to the client immediately and then it takes a little while(15 seconds or little bit more and send back to me answer 200 ok) It occurs a writing json value into MongoDB and time is important option for me in terms with REST call. How can I find the error in this case? (which tool or script code can help me?) My server side code is like that
var controlPathDatabaseSave = "/save";
app.use('/', function(req, res) {
console.log("req body app use", req.body);
var str= req.path;
if(str.localeCompare(controlPathDatabaseSave) == 0)
{
console.log("controlPathDatabaseSave");
mongoDbHandleSave(req.body);
res.setHeader('Content-Type', 'application/json');
res.write('Message taken: \n');
res.write('Everything all right with database saving');
res.send("OK");
console.log("response body", res.body);
}
});
My client side code as below:
function saveDatabaseData()
{
console.log("saveDatabaseData");
var oReq = new XMLHttpRequest();
oReq.open("POST", "http://192.168.80.143:2800/save", true);
oReq.setRequestHeader("Content-type", "application/json;charset=UTF-8");
oReq.onreadystatechange = function() {//Call a function when the state changes.
if(oReq.readyState == 4 && oReq.status == 200) {
console.log("http responseText", oReq.responseText);
}
}
oReq.send(JSON.stringify({links: links, nodes: nodes}));
}
--Mongodb save code
function mongoDbHandleSave(reqParam){
//Connect to the db
MongoClient.connect(MongoDBURL, function(err, db)
{
if(!err)
{
console.log("We are connected in accordance with saving");
} else
{
return console.dir(err);
}
/*
db.createCollection('user', {strict:true}, function(err, collection) {
if(err)
return console.dir(err);
});
*/
var collection = db.collection('user');
//when saving into database only use req.body. Skip JSON.stringify() function
var doc = reqParam;
collection.update(doc, doc, {upsert:true});
});
}
You can see my REST call in google chrome developer editor. (First six call has 200 ok. Last one is in pending state)
--Client output
--Server output
Thanks in advance,
Since it looks like these are Ajax requests from a browser, each browser has a limit on the number of simultaneous connections it will allow to the same host. Browsers have varied that setting over time, but it is likely in the 4-6 range. So, if you are trying to run 6 simultaneous ajax calls to the same host, then you may be running into that limit. What the browser does is hold off on sending the latest ones until the first ones finish (thus avoiding sending too many at once).
The general idea here is to protect servers from getting beat up too much by one single client and thus allow the load to be shared across many clients more fairly. Of course, if your server has nothing else to do, it doesn't really need protecting from a few more connections, but this isn't an interactive system, it's just hard-wired to a limit.
If there are any other requests in process (loading images or scripts or CSS stylesheets) to the same origin, those will count to the limit too.
If you run this in Chrome and you open the network tab of the debugger, you could actually see on the timline exactly when a given request was sent and when its response was received. This should show you immediately whether the later requests are being held up at the browser or at the server.
Here's an article on the topic: Maximum concurrent connections to the same domain for browsers.
Also, keep in mind that, depending upon what your requests do on the server and how the server is structured, there may be a maximum number of server requests that can efficiently processed at once. For example, if you had a blocking, threaded server that was configured with one thread for each of four CPUs, then once the server has four requests going at once, it may have to queue the fifth request until the first one is done causing it to be delayed more than the others.
How to detect the Internet connection is offline in JavaScript?
Almost all major browsers now support the window.navigator.onLine property, and the corresponding online and offline window events. Run the following code snippet to test it:
console.log('Initially ' + (window.navigator.onLine ? 'on' : 'off') + 'line');
window.addEventListener('online', () => console.log('Became online'));
window.addEventListener('offline', () => console.log('Became offline'));
document.getElementById('statusCheck').addEventListener('click', () => console.log('window.navigator.onLine is ' + window.navigator.onLine));
<button id="statusCheck">Click to check the <tt>window.navigator.onLine</tt> property</button><br /><br />
Check the console below for results:
Try setting your system or browser in offline/online mode and check the log or the window.navigator.onLine property for the value changes.
Note however this quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. Until Firefox 41, all other conditions return a true value; since Firefox 41, on OS X and Windows, the value will follow the actual network connectivity.
(emphasis is my own)
This means that if window.navigator.onLine is false (or you get an offline event), you are guaranteed to have no Internet connection.
If it is true however (or you get an online event), it only means the system is connected to some network, at best. It does not mean that you have Internet access for example. To check that, you will still need to use one of the solutions described in the other answers.
I initially intended to post this as an update to Grant Wagner's answer, but it seemed too much of an edit, especially considering that the 2014 update was already not from him.
You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
Sidenote: To put the entire application in an "offline" state may lead to a lot of error-prone work of handling state.. wireless connections may come and go, etc. So your best bet may be to just fail gracefully, preserve the data, and alert the user.. allowing them to eventually fix the connection problem if there is one, and to continue using your app with a fair amount of forgiveness.
Sidenote: You could check a reliable site like google for connectivity, but this may not be entirely useful as just trying to make your own request, because while Google may be available, your own application may not be, and you're still going to have to handle your own connection problem. Trying to send a ping to google would be a good way to confirm that the internet connection itself is down, so if that information is useful to you, then it might be worth the trouble.
Sidenote: Sending a Ping could be achieved in the same way that you would make any kind of two-way ajax request, but sending a ping to google, in this case, would pose some challenges. First, we'd have the same cross-domain issues that are typically encountered in making Ajax communications. One option is to set up a server-side proxy, wherein we actually ping google (or whatever site), and return the results of the ping to the app. This is a catch-22 because if the internet connection is actually the problem, we won't be able to get to the server, and if the connection problem is only on our own domain, we won't be able to tell the difference. Other cross-domain techniques could be tried, for example, embedding an iframe in your page which points to google.com, and then polling the iframe for success/failure (examine the contents, etc). Embedding an image may not really tell us anything, because we need a useful response from the communication mechanism in order to draw a good conclusion about what's going on. So again, determining the state of the internet connection as a whole may be more trouble than it's worth. You'll have to weight these options out for your specific app.
IE 8 will support the window.navigator.onLine property.
But of course that doesn't help with other browsers or operating systems. I predict other browser vendors will decide to provide that property as well given the importance of knowing online/offline status in Ajax applications.
Until that happens, either XHR or an Image() or <img> request can provide something close to the functionality you want.
Update (2014/11/16)
Major browsers now support this property, but your results will vary.
Quote from Mozilla Documentation:
In Chrome and Safari, if the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other conditions return true. So while you can assume that the browser is offline when it returns a false value, you cannot assume that a true value necessarily means that the browser can access the internet. You could be getting false positives, such as in cases where the computer is running a virtualization software that has virtual ethernet adapters that are always "connected." Therefore, if you really want to determine the online status of the browser, you should develop additional means for checking.
In Firefox and Internet Explorer, switching the browser to offline mode sends a false value. All other conditions return a true value.
if(navigator.onLine){
alert('online');
} else {
alert('offline');
}
There are a number of ways to do this:
AJAX request to your own website. If that request fails, there's a good chance it's the connection at fault. The JQuery documentation has a section on handling failed AJAX requests. Beware of the Same Origin Policy when doing this, which may stop you from accessing sites outside your domain.
You could put an onerror in an img, like <img src="http://www.example.com/singlepixel.gif" onerror="alert('Connection dead');" />.
This method could also fail if the source image is moved / renamed, and would generally be an inferior choice to the ajax option.
So there are several different ways to try and detect this, none perfect, but in the absence of the ability to jump out of the browser sandbox and access the user's net connection status directly, they seem to be the best options.
As olliej said, using the navigator.onLine browser property is preferable than sending network requests and, accordingly with developer.mozilla.org/En/Online_and_offline_events, it is even supported by old versions of Firefox and IE.
Recently, the WHATWG has specified the addition of the online and offline events, in case you need to react on navigator.onLine changes.
Please also pay attention to the link posted by Daniel Silveira which points out that relying on those signal/property for syncing with the server is not always a good idea.
You can use $.ajax()'s error callback, which fires if the request fails. If textStatus equals the string "timeout" it probably means connection is broken:
function (XMLHttpRequest, textStatus, errorThrown) {
// typically only one of textStatus or errorThrown
// will have info
this; // the options for this ajax request
}
From the doc:
Error: A function to be called if the request
fails. The function is passed three
arguments: The XMLHttpRequest object,
a string describing the type of error
that occurred and an optional
exception object, if one occurred.
Possible values for the second
argument (besides null) are "timeout",
"error", "notmodified" and
"parsererror". This is an Ajax Event
So for example:
$.ajax({
type: "GET",
url: "keepalive.php",
success: function(msg){
alert("Connection active!")
},
error: function(XMLHttpRequest, textStatus, errorThrown) {
if(textStatus == 'timeout') {
alert('Connection seems dead!');
}
}
});
window.navigator.onLine
is what you looking for, but few things here to add, first, if it's something on your app which you want to keep checking (like to see if the user suddenly go offline, which correct in this case most of the time, then you need to listen to change also), for that you add event listener to window to detect any change, for checking if the user goes offline, you can do:
window.addEventListener("offline",
()=> console.log("No Internet")
);
and for checking if online:
window.addEventListener("online",
()=> console.log("Connected Internet")
);
The HTML5 Application Cache API specifies navigator.onLine, which is currently available in the IE8 betas, WebKit (eg. Safari) nightlies, and is already supported in Firefox 3
I had to make a web app (ajax based) for a customer who works a lot with schools, these schools have often a bad internet connection I use this simple function to detect if there is a connection, works very well!
I use CodeIgniter and Jquery:
function checkOnline() {
setTimeout("doOnlineCheck()", 20000);
}
function doOnlineCheck() {
//if the server can be reached it returns 1, other wise it times out
var submitURL = $("#base_path").val() + "index.php/menu/online";
$.ajax({
url : submitURL,
type : "post",
dataType : "msg",
timeout : 5000,
success : function(msg) {
if(msg==1) {
$("#online").addClass("online");
$("#online").removeClass("offline");
} else {
$("#online").addClass("offline");
$("#online").removeClass("online");
}
checkOnline();
},
error : function() {
$("#online").addClass("offline");
$("#online").removeClass("online");
checkOnline();
}
});
}
an ajax call to your domain is the easiest way to detect if you are offline
$.ajax({
type: "HEAD",
url: document.location.pathname + "?param=" + new Date(),
error: function() { return false; },
success: function() { return true; }
});
this is just to give you the concept, it should be improved.
E.g. error=404 should still mean that you online
I know this question has already been answered but i will like to add my 10 cents explaining what's better and what's not.
Window.navigator.onLine
I noticed some answers spoke about this option but they never mentioned anything concerning the caveat.
This option involves the use of "window.navigator.onLine" which is a property under Browser Navigator Interface available on most modern browsers. It is really not a viable option for checking internet availability because firstly it is browser centric and secondly most browsers implement this property differently.
In Firefox: The property returns a boolean value, with true meaning online and false meaning offline but the caveat here is that
"the value is only updated when the user follows links or when a script requests a remote page." Hence if the user goes offline and
you query the property from a js function or script, the property will
always return true until the user follows a link.
In Chrome and Safari: If the browser is not able to connect to a local area network (LAN) or a router, it is offline; all other
conditions return true. So while you can assume that the browser is
offline when it returns a false value, you cannot assume that a true
value necessarily means that the browser can access the internet. You
could be getting false positives, such as in cases where the computer
is running a virtualization software that has virtual ethernet
adapters that are always "connected".
The statements above is simply trying to let you know that browsers alone cannot tell. So basically this option is unreliable.
Sending Request to Own Server Resource
This involves making HTTP request to your own server resource and if reachable assume internet availability else the user is offline. There are some few caveats to this option.
No server availability is 100% reliant, hence if for some reason your server is not reachable it would be falsely assumed that the user is offline whereas they're connected to the internet.
Multiple request to same resource can return cached response making the http response result unreliable.
If you agree your server is always online then you can go with this option.
Here is a simple snippet to fetch own resource:
// This fetches your website's favicon, so replace path with favicon url
// Notice the appended date param which helps prevent browser caching.
fetch('/favicon.ico?d='+Date.now())
.then(response => {
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely assume the user has connection to the internet
console.log("Internet connection available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
Sending Request to Third-Party Server Resource
We all know CORS is a thing.
This option involves making HTTP request to an external server resource and if reachable assume internet availability else the user is offline. The major caveat to this is the Cross-origin resource sharing which act as a limitation. Most reputable websites blocks CORS requests but for some you can have your way.
Below a simple snippet to fetch external resource, same as above but with external resource url:
// Firstly you trigger a resource available from a reputable site
// For demo purpose you can use the favicon from MSN website
// Also notice the appended date param which helps skip browser caching.
fetch('https://static-global-s-msn-com.akamaized.net/hp-neu/sc/2b/a5ea21.ico?d='+Date.now())
.then(response => {
// Check if the response is successful
if (!response.ok)
throw new Error('Network response was not ok');
// At this point we can safely say the user has connection to the internet
console.log("Internet available");
})
.catch(error => {
// The resource could not be reached
console.log("No Internet connection", error);
});
So, Finally for my personal project i went with the 2nd option which involves requesting own server resource because basically there are many factors to tell if there is "Internet Connection" on a user's device, not just from your website container alone nor from a limited browser api.
Remember your users can also be in an environment where some websites or resources are blocked, prohibited and not accessible which in turn affects the logic of connectivity check. The best bet will be:
Try to access a resource on your own server because this is your users environment (Typically i use website's favicon because the response is very light and it is not frequently updated).
If there is no connection to the resource, simply say "Error in connection" or "Connection lost" when you need to notify the user rather than assume a broad "No internet connection" which depends on many factors.
I think it is a very simple way.
var x = confirm("Are you sure you want to submit?");
if (x) {
if (navigator.onLine == true) {
return true;
}
alert('Internet connection is lost');
return false;
}
return false;
The problem of some methods like navigator.onLine is that they are not compatible with some browsers and mobile versions, an option that helped me a lot was to use the classic XMLHttpRequest method and also foresee the possible case that the file was stored in cache with response XMLHttpRequest.status is greater than 200 and less than 304.
Here is my code:
var xhr = new XMLHttpRequest();
//index.php is in my web
xhr.open('HEAD', 'index.php', true);
xhr.send();
xhr.addEventListener("readystatechange", processRequest, false);
function processRequest(e) {
if (xhr.readyState == 4) {
//If you use a cache storage manager (service worker), it is likely that the
//index.php file will be available even without internet, so do the following validation
if (xhr.status >= 200 && xhr.status < 304) {
console.log('On line!');
} else {
console.log('Offline :(');
}
}
}
I was looking for a client-side solution to detect if the internet was down or my server was down. The other solutions I found always seemed to be dependent on a 3rd party script file or image, which to me didn't seem like it would stand the test of time. An external hosted script or image could change in the future and cause the detection code to fail.
I've found a way to detect it by looking for an xhrStatus with a 404 code. In addition, I use JSONP to bypass the CORS restriction. A status code other than 404 shows the internet connection isn't working.
$.ajax({
url: 'https://www.bing.com/aJyfYidjSlA' + new Date().getTime() + '.html',
dataType: 'jsonp',
timeout: 5000,
error: function(xhr) {
if (xhr.status == 404) {
//internet connection working
}
else {
//internet is down (xhr.status == 0)
}
}
});
How about sending an opaque http request to google.com with no-cors?
fetch('https://google.com', {
method: 'GET', // *GET, POST, PUT, DELETE, etc.
mode: 'no-cors',
}).then((result) => {
console.log(result)
}).catch(e => {
console.error(e)
})
The reason for setting no-cors is that I was receiving cors errors even when disbaling the network connection on my pc. So I was getting cors blocked with or without an internet connection. Adding the no-cors makes the request opaque which apperantly seems to bypass cors and allows me to just simply check if I can connect to Google.
FYI: Im using fetch here for making the http request.
https://www.npmjs.com/package/fetch
My way.
<!-- the file named "tt.jpg" should exist in the same directory -->
<script>
function testConnection(callBack)
{
document.getElementsByTagName('body')[0].innerHTML +=
'<img id="testImage" style="display: none;" ' +
'src="tt.jpg?' + Math.random() + '" ' +
'onerror="testConnectionCallback(false);" ' +
'onload="testConnectionCallback(true);">';
testConnectionCallback = function(result){
callBack(result);
var element = document.getElementById('testImage');
element.parentNode.removeChild(element);
}
}
</script>
<!-- usage example -->
<script>
function myCallBack(result)
{
alert(result);
}
</script>
<a href=# onclick=testConnection(myCallBack);>Am I online?</a>
Just use navigator.onLine if this is true then you're online else offline
request head in request error
$.ajax({
url: /your_url,
type: "POST or GET",
data: your_data,
success: function(result){
//do stuff
},
error: function(xhr, status, error) {
//detect if user is online and avoid the use of async
$.ajax({
type: "HEAD",
url: document.location.pathname,
error: function() {
//user is offline, do stuff
console.log("you are offline");
}
});
}
});
You can try this will return true if network connected
function isInternetConnected(){return navigator.onLine;}
Here is a snippet of a helper utility I have. This is namespaced javascript:
network: function() {
var state = navigator.onLine ? "online" : "offline";
return state;
}
You should use this with method detection else fire off an 'alternative' way of doing this. The time is fast approaching when this will be all that is needed. The other methods are hacks.
There are 2 answers forthis for two different senarios:-
If you are using JavaScript on a website(i.e; or any front-end part)
The simplest way to do it is:
<h2>The Navigator Object</h2>
<p>The onLine property returns true if the browser is online:</p>
<p id="demo"></p>
<script>
document.getElementById("demo").innerHTML = "navigator.onLine is " + navigator.onLine;
</script>
But if you're using js on server side(i.e; node etc.), You can determine that the connection is lost by making failed XHR requests.
The standard approach is to retry the request a few times. If it doesn't go through, alert the user to check the connection, and fail gracefully.
I have a node.js process that uses a large number of client requests to pull information from a website. I am using the request package (https://www.npmjs.com/package/request) since, as it says: "It supports HTTPS and follows redirects by default."
My problem is that after a certain period of time, the requests begin to hang. I haven't been able to determine if this is because the server is returning an infinite data stream, or if something else is going on. I've set the timeout, but after some number of successful requests, some of them eventually get stuck and never complete.
var options = { url: 'some url', timeout: 60000 };
request(options, function (err, response, body) {
// process
});
My questions are, can I shut down a connection after a certain amount of data is received using this library, and can I stop the request from hanging? Do I need to use the http/https libraries and handle the redirects and protocol switching myself in order the get the kind of control I need? If I do, is there a standardized practice for that?
Edit: Also, if I stop the process and restart it, they pick right back up and start working, so I don't think it is related to the server or the machine the code is running on.
Note that in request(options, callback), the callback will be fired when request is completed and there is no way to break the request.
You should listen on data event instead:
var request = require('request')
var stream = request(options);
var len = 0
stream.on('data', function(data) {
// TODO process your data here
// break stream if len > 1000
len += Buffer.byteLength(data)
if (len > 1000) {
stream.abort()
}
})
I have a PHP application running and I'm uploading a PDF for processing. I have not overridden any PHP ini values, so I'm expecting the post to be able to handle 32MB of data and a timeout of 60 seconds.
When I upload a large document (7.7MB in this case), the app fails in 2 very different ways.
The back end times out and returns successfully having apparently been passed duff data
The backend does not timeout (returning in under a minute) but has an internal server error
The timeout seems to manifest as the back end PHP page getting no data, i.e. whatever is doing the transport times out rather than my page timing out. I can handle this scenario because of the duff data passed in and pass back a useful error message. I don't seem to be able to reproduce this on my local development machine.
The second issue is perplexing as it happens almost immediately on my dev machine and also if the page response is under 1 minute on GAE. I can upload a document of 4.1MB and all is good. The 7.7MB doc causes this every time. The headers look fine and the form data has all the data it needs, although I haven't tried to decode the form data.
Is there another PHP setting causing this? Is there a way to alter this? What could possibly be going on? Could this be a javascript thing as I am using javascript file reader in an HTML5 dropzone - here are the appropriate portions of the handler code:
function loadSpecdoc(file) {
var acceptedTypes = {
'application/pdf' : true
};
if (acceptedTypes[file.type] === true) {
var reader = new FileReader();
reader.onload = function(event) {
$.ajax({
url : "my_handler.php",
type : 'POST',
dataType : "json",
data : {
spec_id : $('#list_spec_items_spec_id').val(),
file_content : event.target.result
},
success : function(response) {
// Handle Success
},
error : function(XMLHttpRequest, textStatus, exception) {
// Handle Failure
},
async : true
});
};
reader.readAsDataURL(file);
} else {
alert("Unsupported file");
console.log(file);
}
};
I have heard of the Blob store but I'm on a bit of a deadline and can't find an documentation on how to make it work in javascript, and can't get the file to my PHP application to use it.
Any help much appreciated.
EDIT: I have just checked in the chrome javascript network console and there are 2 sizes in the "Size Content" column, 79B and 0B, I'm guessing that this is the size up (79B) and response (0B). This being the case, this seems to be a javascript issue??
EDIT 2: Just found the log for my application and it says there is a post content limit of about 8MB... not quite the 32MB I was expecting:
06:26:03.476 PHP Warning: Unknown: POST Content-Length of 10612153 bytes exceeds the limit of 8388608 bytes in Unknown on line 0
EDIT 3: Just found this on limits:
https://cloud.google.com/appengine/docs/php/requests#PHP_Quotas_and_limits
I am expecting 32MB of post, assuming I can upload it quick enough :) How do I fix this?