I have a div, which will contain dropdowns and these dropdowns are created dynamically by the user on the click oo a button which is kept outside this div.
So what I need to achieve here is I wanna display 'No filter applied' when there are no dropdowns and remove that 'No filter applied' while there are dropdowns present.
I tried this scenario through addEventListener but I am not sure what action needs to implement for this scenario?
document.addEventListener("DOMContentLoaded", function(event) {
var activities = document.getElementById("dvContainer");
activities.addEventListener("change", function() {
if (activities.childElementCount > 0) {
activities.classList.add("displayZero");
} else {
activities.classList.remove("displayZero");
}
//console.log('ajay');
});
});
function AddDropDownList() {}
<input type="button" id="btnAdd" onclick="AddDropDownList()" value="Add Filter" />
<div id="dvContainer"><span>No Filters applied.</span></div>
This is my try, thanks in advance.
According to what you mentioned, you have a button that with click it, you add dropdowns dynamically.
so you don't need any extra event!!
in your button's click function:
yourButton.onclick=function(){
//..... do somethings similar adding dropdowns
activities.classList.add("displayZero");
};
And where you remove dropdown:
activities.classList.remove("displayZero");
Currently, I can think of only 2 ways to resolve:
The Easiest solution is first to create update function then call it from init of dom and then in the AddDropDownList. E.g.
function update() {
if (activities.childElementCount > 0) {
activities.classList.add("displayZero");
} else {
activities.classList.remove("displayZero");
}
}
window.onload = function() {
update();
}
function AddDropDownList() {
//Put Your code as you have written and then add
update();
}
Use Mutation Observer
window.onload = function() {
// Select the node that will be observed for mutations
var targetNode = document.getElementById('dvContainer');
// Options for the observer (which mutations to observe)
var config = {
attributes: true,
childList: true,
subtree: true
};
// Create an observer instance linked to the callback function
var observer = new MutationObserver(callback);
// Start observing the target node for configured mutations
observer.observe(targetNode, config);
}
function AddDropDownList() {
}
// Callback function to execute when mutations are observed
var callback = function(mutationsList) {
for (var mutation of mutationsList) {
if (mutation.type == 'childList') {
console.log('A child node has been added or removed.');
if (activities.childElementCount > 0) {
activities.classList.add("displayZero");
} else {
activities.classList.remove("displayZero");
}
} else if (mutation.type == 'attributes') {
console.log('The ' + mutation.attributeName + ' attribute was modified.');
}
}
};
Related
I want to remove a class from an element when a modal pops-up But when I searched online I found DOMNodeInserted and it was working until it went live and the error I got was DOMNodeInserted has been deprecated. The error I keep getting below
enter image description here
CODE WORKING BELOW, but has been deprecated.
$(document).on('DOMNodeInserted', function(e) {
if ( $("body").hasClass('modal-open') ) {
$(".hide-search").hide();
// $(".nav-menu").addClass("border-0");
} else if ($("body").hasClass('modal-open') === false){
$(".hide-search").show();
// $(".nav-menu").removeClass("border-0");
}
});
New code i wanted to Implement but i don't know how to go about it.
let body = document.querySelector('body');
let observer = new MutationObserver(mutationRecords => {
console.log(mutationRecords); // console.log(the changes)
// observe everything except attributes
observer.observe(body, {
childList: true, // observe direct children
subtree: true, // and lower descendants too
characterDataOldValue: true // pass old data to callback
});
});
}
}
observe() should be outside the callback
all you need to observe is the class attribute, nothing else, so there's no need for the extremely expensive subtree:true.
the class may include something else so you need to ignore irrelevant changes
new MutationObserver((mutations, observer) => {
const oldState = mutations[0].oldValue.split(/\s+/).includes('modal-open');
const newState = document.body.classList.contains('modal-open');
if (oldState === newState) return;
if (newState) {
$('.hide-search').hide();
} else {
$('.hide-search').show();
}
}).observe(document.body, {
attributes: true,
attributeFilter: ['class'],
attributeOldValue: true,
});
I was able to resolve the above problem with this solution
function myFunction(x) {
if (x.matches) {
var body = $("body");
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(mutation) {
if (mutation.attributeName === "class") {
var attributeValue = $(mutation.target).prop(mutation.attributeName);
console.log("Class attribute changed to:", attributeValue);
if(attributeValue == "ng-scope modal-open") {
$(".input-group").addClass("removeDisplay");
$(".nav-menu").addClass("hide-nav-menu");
} else {
$(".input-group").removeClass("removeDisplay");
$(".nav-menu").removeClass("hide-nav-menu");
}
}
});
});
observer.observe(body[0], {
attributes: true
});
}
}
// Wow It's working.
var x = window.matchMedia("(max-width: 1240px)")
myFunction(x)
x.addListener(myFunction)
Firstly I used a match media to check if the screen is lesser than 1240px size then I used the mutation along with checking if an attribute class is present, then perform some certain actions based on that.
Let's say I am trying to run code bellow on 9gag to get images that are dynamically added form infinite scroll. I am trying to figure out how to get img element.
//want to do something useful in this function
checkIfImg = function(toCheck){
if (toCheck.is('img')) {
console.log("finaly");
}
else {
backImg = toCheck.css('background-image');
if (backImg != 'none'){
console.log("background fynaly");
}
}
}
//that works just fine, since it is not for dynamic content
//$('*').each(function(){
// checkIfImg($(this));
//})
//this is sums up all my attempts
var observer = new MutationObserver(function (mutations) {
mutations.forEach(function (mutation) {
switch (mutation.type) {
case 'childList':
Array.prototype.forEach.call(mutation.target.children, function (child) {
if ( child.tagName === "IMG" ) {
console.log("img");
}
child.addEventListener( 'load', checkIfImg, false );
console.log("forEachChild");
console.log(child);
checkIfImg($(child));
$(child).each(function(){
console.log("inside each");
console.log($(this));
if ($(this).tagName == "IMG"){
console.log("img");
}
checkIfImg($(this));
})
});
break;
default:
}
});
});
observer.observe(document, {childList: true, subtree: true});
Observer gets lots of different elements but I can't seem to find any img among them.
You need to check for img elements deeper down the tree, not only the direct children of mutation.children (each of them may contain additional children).
You could do this with a $.find('img'), and use an array to eliminate duplicates:
let imageList = [];
//want to do something useful in this function
function checkIfImg(toCheck) {
// find all images in changed node
let images = toCheck.find('img');
for(let image of images) {
let imageSource = $(image).attr('src');
if(!imageList.includes(imageSource)) {
imageList.push(imageSource);
console.log("image:", imageSource);
}
}
};
// get existing images
checkIfImg($(document));
// observe changes
var observer = new MutationObserver(function(mutations) {
mutations.forEach(mutation => checkIfImg($(mutation.target)));
});
observer.observe(document, { childList: true, subtree: true });
Hi,
I need to execute a javascript function once as soon as an element with a given class appears on the code (the element will be generated by another script).
This is my function:
play(sound);
the element would appear inside this:
<div id="canvas">
The element would look like this:
<span class="sound">sound name</span>
where "sound name" will determine the argument for play();
how can this be done with javascript?
Thank you.
You can use a You could use a MutationObserver as shown below.
The second argument to .observe(), MutationObserverInit, is important:
In the options, use childList: true if the span will only be added as a direct child. subTree: true if it can be at any level down below #canvas.
From the docs:
childList: Set to true if additions and removals of the target node's child elements (including text nodes) are to be observed.
subtree: Set to true if mutations to target and target's descendants are to be observed.
$("#go").click(function () {
$("#canvas").append($('<span class="sound">sound name</span>'));
});
function play(n) { alert('playing '+ n); }
var obs = new MutationObserver(function(mutations, observer) {
$.each(mutations, function (i, mutation) {
var addedNodes = $(mutation.addedNodes);
var selector = "span.sound"
var spanSounds = addedNodes.find(selector).addBack(selector); // finds either added alone or as tree
spanSounds.each(function () { // handles any number of added spans
play($(this).text());
});
});
});
obs.observe($("#canvas")[0], {childList: true, subtree: true});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="canvas"></div>
<button id="go">Add span to canvas</button>
Using plain JavaScript
The code is a little less compact, but it is definitely doable:
document.getElementById("go").addEventListener('click', function () {
var s = document.createElement('span');
s.innerText = 'sound name';
s.classList.add('sound')
document.getElementById('canvas').appendChild(s);
});
function play(n) { alert('playing '+ n); }
var obs = new MutationObserver(function(mutations, observer) {
for(var i=0; i<mutations.length; ++i) {
for(var j=0; j<mutations[i].addedNodes.length; ++j) {
var addedNode = mutations[i].addedNodes[j];
//NOTE: if the element was added as child of another element, you would have to traverse
// the addedNode to find it. I recommend the jQuery solution above if that's the case
if(addedNode.tagName == "SPAN" && addedNode.classList.contains("sound")) {
play(addedNode.innerText);
}
}
}
});
obs.observe(document.getElementById('canvas'), {childList: true, subtree: true});
<div id="canvas"></div>
<button id="go">Add span to canvas</button>
You could probably try onload event
You need a listener to detect the DOM change, MutationObserver
// Select the node that will be observed for mutations
var targetNode = document.getElementById('some-id');
// Options for the observer (which mutations to observe)
var config = { attributes: true, childList: true };
// Callback function to execute when mutations are observed
var callback = function(mutationsList) {
for(var mutation of mutationsList) {
if (mutation.type == 'childList') {
console.log('A child node has been added or removed.');
}
else if (mutation.type == 'attributes') {
console.log('The ' + mutation.attributeName + ' attribute was modified.');
}
}
};
// Create an observer instance linked to the callback function
var observer = new MutationObserver(callback);
// Start observing the target node for configured mutations
observer.observe(targetNode, config);
// Later, you can stop observing
observer.disconnect();
I have the following DOM Mutation Observer code:
<script type="text/javascript">
var targetNodes = $("#history");
var MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var myObserver = new MutationObserver (mutationHandler);
var obsConfig = { childList: true, characterData: true, attributes: true, subtree: true };
//--- Add a target node to the observer. Can only add one node at a time.
targetNodes.each ( function () {
myObserver.observe (this, obsConfig);
} );
function mutationHandler (mutationRecords) {
console.info ("mutationHandler:");
mutationRecords.forEach ( function (mutation) {
$("span.badge").show();
} );
}
</script>
It is working fine when events changes are detected in #history id.
<p id="history"></p>
The problem is that i have some p.class inside #history as follows:
<p id="history">
<p class="mine"></p>
<p class="theirs"></p>
</p>
i need to detect the observer changes only in p class="theirs".
How is that possible only with child class, rather than observing DOM changes in #history id as a whole...
Introduction:
when you use the format:
$("#history").each ( function () {
myObserver.observe (this, obsConfig);
});
this is useless. $("#history") returns one element or nothing.
To test if a value is returned you may use
$("#history").length
This value in your case is 1. Remember that cannot exist more than one element with the same id (refer to: # selector).
In the each loop you use the this keyword. The value of this keyword is "Node target" element required from observe function.
So, because you have only one history element it's completely useless to cycle con only one element (refer: each function). Use the value by itself.
This value can be searched also with:
var target = document.getElementsByClassName('theirs')[0];
or
target = document.querySelectorAll('.theirs')[0];
or
target = $('.theirs').get(0);
Of course, if you do not have such new element on which to observe you cannot use the observe function.
For details see MutationObserver
The best way is to test the return value of the selected element, for instance:
if ($('.theirs').length == 0) {
// raise error and stop
} else {
target = $('.theirs').get(0);
}
Instead, if you have more than one element you may continue to use the each loop:
$(".theirs").each ( function () {
myObserver.observe (this, obsConfig);
});
My proposal:
According to HTML Paragraph tag you cannot have nested paragraphs.
If you need to observe only what happens for your 'theirs' paragraph you need simply to change a bit your code:
$(function () {
var targetNodes = $(".theirs");
var MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var myObserver = new MutationObserver(mutationHandler);
var obsConfig = {childList: true, characterData: true, attributes: true, subtree: true};
// get the target node on which to observe DOM mutations
var target = document.getElementsByClassName('theirs')[0];
// another way to get the target is
target = document.querySelectorAll('.theirs')[0];
// another way to get the target is
if ($('.theirs').length == 0) {
// raise error and stop
} else {
target = $('.theirs').get(0);
}
myObserver.observe(target, obsConfig);
function mutationHandler(mutationRecords) {
alert("mutationHandler:");
mutationRecords.forEach(function (mutation) {
$("span.badge").show();
});
}
$('#btn').on('click', function (e) {
$('.theirs').text('Date Now is: ' + Date.now());
});
});
<script src="https://code.jquery.com/jquery-1.12.1.min.js"></script>
<div id="history">
<p class="mine"></p>
<p class="theirs"></p>
</div>
<button id="btn">Add text to theirs</button>
If you are interested in changes happening only for paragraphs added or changed inside the div with class theirs, according to the MutationRecord in the following I report only a demo on how to filter the events for new such added nodes (remember to start and stop the observer):
var myObserver = null;
function mutationHandler(mutationRecords, mutationInstance) {
// new node added
if (mutationRecords.length == 1 && mutationRecords[0].addedNodes.length == 1) {
// if element added is a paragraph with class theirs....
var eleAdded = $(mutationRecords[0].addedNodes[0]);
if (eleAdded.is('p.theirs')) {
alert("mutationHandler: added new paragraph with class theirs: " + eleAdded.text());
}
}
// if you need to listen for other events like attribute changed or element removed... please read the documentation regarding mutationRecords object
}
$(function () {
$('#startObserver').on('click', function(e) {
var targetNodes = $('#history');
var target = null;
if (targetNodes.length != 1) {
alert('Cannot start Observer on no element!')
return;
} else {
target = targetNodes.get(0);
}
var MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
myObserver = new MutationObserver(mutationHandler);
var obsConfig = {childList: true, characterData: true, attributes: true, subtree: true};
myObserver.observe(target, obsConfig);
});
$('#stopObserver').on('click', function(e) {
if (myObserver === null) {
alert('Cannot stop an Observer never started!')
} else {
myObserver.disconnect();
myObserver = null;
}
});
$('#btnMine').on('click', function (e) {
var txt = $('#mineInput').val();
$('#history').prepend('<p class="mine">Added mine paragraph with text: ' + (txt.trim() ? txt : 'empty text!') + '</p>');
});
$('#btnTheirs').on('click', function (e) {
var txt = $('#theirsInput').val();
$('#history').append($('<p class="theirs">Added theirs paragraph with text: ' + (txt.trim() ? txt : 'empty text!') + '</p>'));
});
});
<script src="https://code.jquery.com/jquery-1.12.1.min.js"></script>
<div id="history">
</div>
Mine paragraphs text: <input id="mineInput" type="text"><br>
Theirs paragraphs text: <input id="theirsInput" type="text"><br>
<button id="btnMine">Add new Mine paragrapgh</button>
<button id="btnTheirs">Add new Theirs paragrapgh</button><br><br>
<button id="startObserver">Start Observer</button>
<button id="stopObserver">Stop Observer</button>
I want to execute some code if this element exists <div id="element">Some text</div> using jquery.
my code until now:
setInterval(function(){check()}, 100);
function check() {
var count = document.getElementById("count");
if(document.getElementById("element") && count.value != 1) {
//some code
count.value = 1;
}
}
It works, but I think this is a very bad way to reach my target.
I want an easier solution, but I didn't find.
Your way is the most reliable, because it cannot fail.
However, you may wish to try listening for change events on the count element, and reset the value if your element exists. This will mean your verification code only runs when a change is made to the value.
do you want to do this initially?
hjow about you do this?
$(document).ready(function(){
if($(#element)) { do something };
});
EDIT:
after 10 seconds of search:
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
You can listen DOM events (when an element is inserted or modified) and check your condition only at this time, not every time interval.
If you need some information about DOM events you can take a look at : http://en.wikipedia.org/wiki/DOM_events#HTML_events (mutation events)
One solution I can think of is about using MutationObserver with a fallback mechanism like
jQuery(function() {
if (window.MutationObserver) {
var target = document.querySelector('#myparent');
// create an observer instance
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(mutation) {
[].forEach.call(mutation.addedNodes, function(el, i) {
if (el.id == 'element') {
check();
//if you don't want to listen any more remove the listener
//observer.disconnect();
}
})
});
});
// configuration of the observer:
var config = {
childList: true
};
// pass in the target node, as well as the observer options
observer.observe(target, config);
} else {
setInterval(function() {
if (document.getElementById("element")) {
check();
}
}, 100);
}
function check() {
var count = document.getElementById("count");
if (count.value != 1) {
//some code
count.value = 1;
}
}
});
$('button').click(function() {
$('#myparent').append('<div id="element">Some text</div>');
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>
<button>Add</button>
<input id="count" />
<div id="myparent"></div>
Note: The solution assumes you have a static parent element for the dynamic element(like the myparent element in the above example)