I've created this step definition to check if a given text exists in a web page. The code works properly but sometimes, expecially when I look for a long text, I get an error even if the text exists in the page.
The code is this:
this.Then(/^The text "([^"]*)" exists in page$/, function(myText, callback){
browser.sleep(10000);
var selectedElement = element(by.xpath("//*[. = '" + myText + "']"));
expect(selectedElement.isPresent()).to.eventually.equal(true, "This text is not present in page").and.notify(callback);
});
Basically I do three things:
I wait 10 seconds to be sure that all elements of the DOM have been loaded.
I seach for an element(div, p, label or whatever) thet contains the text I'm looking for.
I check if the element is present oterwise I get an error.
Can you tell me if there is a better way to do this? It's correct to use browser.sleep() at the beginning of a step definition to wait for the DOM loading?
IMPORTANT: I'm not using Angularjs
Thank you in advance.
Most likely, the problem is because you are using a strict text match, but there could be extra spaces or newlines around a desired text. You can try with contains() if this is applicable:
element(by.xpath("//*[contains(., '" + myText + "')]"));
Or, with normalize-space():
element(by.xpath("//*[text()[normalize-space() = '" + myText + "']]"));
As a side note, using browser.sleep() to wait for a page to load is not quite reliable and should be avoided. There is a better way - browser.wait() and Expected Conditions.
I'm trying to create a function in javascript (or jQuery) that will take a variable filled with html and output a plain text version. The function needs to strip the html tags and insert line breaks at the end of heading and paragraph tags.
I've been going round in circles for ages with this. There are lots of examples of how to take a DOM object, e.g. document.body.innerHTML and remove the tags. However, I'm using a variable filled with html and the results are not the same.
This is the supposed duplicate solution: http://jsfiddle.net/8JSZX/. However, create an html variable and use that and you get: http://jsfiddle.net/JjXXY/ - which does not preserve the line breaks.
The html variable would be something like:
var html = '<h1>This is a heading</h1><p>This is a paragraph</p><p>This is another paragraph</p>'
If there is a better solution to this I'm open to suggestions!
Gave it a shot:
var html_string = '<h1>Test</h1><p>A paragraph with a link</p>';
var regex = /<(\/?)[a-zA-Z0-9][^>]*>/g;
var stripped = html_string.replace(regex, '');
$("#result").html(stripped);
See: http://jsfiddle.net/Y6q2j/5/
I am trying to get a certain area of data out from ckeditor. In order to do that I use the following code
function get_body_html(){
var email = CKEDITOR.instances['message'].getData();
var before_body = header_to + to + to_subject + subject + subject_body;
var s_index = email.indexOf(before_body)+before_body.length;
var e_index = email.indexOf(body_footer);
return email.substring(s_index,e_index);
}
For some reason that works when I do this on page load
CKEDITOR.instances.message.setData(header_to + to + to_subject+
subject + subject_body + body_text + body_footer);
get_body_html();
it works correctly and gives me the same string that is contained in body_text.
But when I do this
body_text = get_body_html();
CKEDITOR.instances.message.setData(header_to + to + to_subject + subject +
subject_body + body_text + body_footer);
in an onclick function it gets the wrong indexs somehow. Sometimes it can't find the string and returns -1 other times it just gets a weird index that doesn't make sense. These index variations only happen when my code is changed to tackle the problem a different way. So if it is the wrong indices like -5 and 2 then those would continue to be the wrong indices until I made a code change.
There are two facts that you should know about editor.setData.
In some cases it is asynchronous (it depends on the type of editor). That's why it also accepts a callback. Therefore any code that is meant to be executed after setData() should be executed in that callback.
It never is asynchronous before editor is ready. In this period (between editor initialization and instanceReady event) it works in a different mode - it just caches the set value and on getData() it returns exactly that value.
So, as I see on page load you call synchronously setData() and getData() - your function works because you get the value you're expecting to get.
But then, when you try to getData() when editor is already ready you get the HTML parsed, fixed, processed and perhaps differently formatted by CKEditor. I guess that your indexOf() checks are not enough to handle this. You have to rethink your function - e.g. regexp can help.
What also can help is removing htmlwriter plugin, which formats HTML in a way which may make it harder for you to work with it. E.g.:
config.removePlugins = 'htmlwriter';
I was able to get it to work. So the htmlwriter was one of the problems because it must add spaces in between by HTML tags. The other issue I found is that it strips some of the semicolons out in some of the style attributes. Overall CKEditor does a lot of formatting of the source which makes it very hard to index correctly but it's pretty much a trial and error thing. I ended up using the search JavaScript method for strings which can take a regular expression but I used it the same way indexOf would be used so I don't really know if that made a difference or not.
Javascript newb here. Creating a bookmarklet to automate a simple task at work. Mostly a learning exercise. It will scan a transcript on CNN.com, for instance: (http://transcripts.cnn.com/TRANSCRIPTS/1302/28/acd.01.html). It will grab the lead stories at the top of the page, the name and title of the guests on the show, and format them so that they can be copy pasted into another document.
I've come up with a simple version that includes some jQuery that grabs the subheading and then uses a regular expression to find the names of the guests (it will also exclude everything between (begin videoclip) and (end videoclip), but I haven't gotten that far yet. It then alerts them (will eventually print them in a pop-up window, alert is just for troubleshooting purposes).
I'm using http://benalman.com/code/test/jquery-run-code-bookmarklet/ to create the bookmarklet. My problem is that once the bookmarklet is created it is completely unresponsive. Click on it and nothing happens. I've tried minimizing the code first with no result. My guess is that cnn.com's javascript is conflicting with mine but I'm not sure how to get around that. Or do I need to include some code to load and store the text on the current page? Here's the code (I've included comments, but I took these out when I used the bookmarklet generator.) Thanks for any help!
//Grabs the subheading
var leadStories=$(".cnnTransSubHead").text();
//Scans the webpage for guest name and title. Includes a regular expression to find any
//string that starts with a capital letter, includes a comma, and ends in a colon.
var scanForGuests=/[A-Z ].+,[A-Z0-9 ].+:/g;
//Joins the array created by scanForGuests with a semicolon instead of a comma
var guests=scanForGuests.join(‘; ‘);
//Creates an alert in the proper format including stories and guests.
alert(“Lead Stories: “ + leadStories + “. ” + guests + “. SEE TRANSCRIPT FIELD FOR FULL TRANSCRIPT.“)
Go to the page. Open up developer tools (ctrl+shift+j in chrome) and paste your code in the console to see what's wrong.
The $ in var leadStories = $(".cnnTransSubHead").text(); is from jQuery and the link provided does not have jQuery loaded into the page.
On any modern browser you should be able to achieve the same results without jQuery:
var leadStories = document.getElementsByClassName('cnnTransSubHead')
.map(function(el) { return el.innerText } );
next we have:
var scanForGuests=/[A-Z ].+,[A-Z0-9 ].+:/g;
var guests=scanForGuests.join('; ');
scanForGuests IS a regular expression, you never actually matched it to anything - so .join() is going to throw an error. I'm not exactly sure what you're trying to do. Are you trying to scan the full text of the page for that regex? In that case something like this would be your best bet
document.body.innerText.match(scanForGuests);
keep in mind that while innerText removes html markup, it's far from perfect and what pops up in it is very much at the mercy of how the page's html is structured. That said, on my quick test it seems to work.
Finally, for something like this you should use an immediately invoked function or you're sticking all your variables into the global context.
So putting it all together you get something like this:
(function() {
var leadStories = document.getElementsByClassName('cnnTransSubHead')
.map(function(el) { return el.innerText } );
var scanForGuests=/[A-Z ].+,[A-Z0-9 ].+:/g;
var guests = document.body.innerText.match(scanForGuests).join("; ");
alert("Leads: " + leadStories + " Guests: " + guests);
})();
So, I have some code that should do four things:
remove the ".mp4" extension from every title
change my video category
put the same description in all of the videos
put the same keywords in all of the videos
Note: All of this would be done on the YouTube upload page. I'm using Greasemonkey in Mozilla Firefox.
I wrote this, but my question is: how do I change the HTML title in the actual HTML page to the new title (which is a Javascript variable)?
This is my code:
function remove_mp4()
{
var title = document.getElementsByName("title").value;
var new_title = title.replace(title.match(".mp4"), "");
}
function add_description()
{
var description = document.getElementsByName("description").value;
var new_description = "Subscribe."
}
function add_keywords()
{
var keywords = document.getElementsByName("keywords").value;
var new_keywords = prompt("Enter keywords.", "");
}
function change_category()
{
var category = document.getElementsByName("category").value;
var new_category = "<option value="27">Education</option>"
}
remove_mp4();
add_description();
add_keywords();
change_category();
Note: If you see any mistakes in the JavaScript code, please let me know.
Note 2: If you wonder why I stored the current HTML values in variables, that's because I think I will have to use them in order to replace HTML values (I may be wrong).
A lot of things have been covered already, but still i would like to remind you that if you are looking for cross browser compatibility innerHTML won't be enough, as you may need innerText too or textContent to tackle some old versions of IE or even using some other way to modify the content of an element.
As a side note innerHTML is considered from a great majority of people as deprecated though some others still use it. (i'm not here to debate about is it good or not to use it but this is just a little remark for you to checkabout)
Regarding remarks, i would suggest minimizing the number of functions you create by creating some more generic versions for editing or adding purposes, eg you could do the following :
/*
* #param $affectedElements the collection of elements to be changed
* #param $attribute here means the attribute to be added to each of those elements
* #param $attributeValue the value of that attribute
*/
function add($affectedElements, $attribute, $attributeValue){
for(int i=0; i<$affectedElements.length; i++){
($affectedElements[i]).setAttribute($attribute, $attributeValue);
}
}
If you use a global function to do the work for you, not only your coce is gonna be easier to maintain but also you'll avoid fetching for elements in the DOM many many times, which will considerably make your script run faster. For example, in your previous code you fetch the DOM for a set of specific elements before you can add a value to them, in other words everytime your function is executed you'll have to go through the whole DOM to retrieve your elements, while if you just fetch your elements once then store in a var and just pass them to a function that's focusing on adding or changing only, you're clearly avoiding some repetitive tasks to be done.
Concerning the last function i think code is still incomplete, but i would suggest you use the built in methods for manipulating HTMLOption stuff, if i remember well, using plain JavaScript you'll find yourself typing this :
var category = document.getElem.... . options[put-index-here];
//JavaScript also lets you create <option> elements with the Option() constructor
Anyway, my point is that you would better use JavaScript's available methods to do the work instead of relying on innerHTML fpr anything you may need, i know innerHTML is the simplest and fastest way to get your work done, but if i can say it's like if you built a whole HTML page using and tags only instead of using various semantic tags that would help make everything clearer.
As a last point for future use, if you're interested by jQuery, this will give you a different way to manipulate your DOM through CSS selectors in a much more advanced way than plain JavaScript can do.
you can check out this link too :
replacement for innerHTML
I assume that your question is only about the title changing, and not about the rest; also, I assume you mean changing all elements in the document that have "title" as name attribute, and not the document title.
In that case, you could indeed use document.getElementsByName("title").
To handle the name="title" elements, you could do:
titleElems=document.getElementsByName("title");
for(i=0;i<titleElems.length;i++){
titleInner=titleElems[i].innerHTML;
titleElems[i].innerHTML=titleInner.replace(titleInner.match(".mp4"), "");
}
For the name="description" element, use this: (assuming there's only one name="description" element on the page, or you want the first one)
document.getElementsByName("description")[0].value="Subscribe.";
I wasn't really sure about the keywords (I haven't got a YouTube page in front of me right now), so this assumes it's a text field/area just like the description:
document.getElementsByName("keywords")[0].value=prompt("Please enter keywords:","");
Again, based on your question which just sets the .value of the category thingy:
document.getElementsByName("description")[0].value="<option value='27'>Education</option>";
At the last one, though, note that I changed the "27" into '27': you can't put double quotes inside a double-quoted string assuming they're handled just like any other character :)
Did this help a little more? :)
Sry, but your question is not quite clear. What exactly is your HTML title that you are referring to?
If it's an element that you wish to modify, use this :
element.setAttribute('title', 'new-title-here');
If you want to modify the window title (shown in the browser tab), you can do the following :
document.title = "the new title";
You've reading elements from .value property, so you should write back it too:
document.getElementsByName("title").value = new_title
If you are refering to changing text content in an element called title try using innerHTML
var title = document.getElementsByName("title").value;
document.getElementsByName("title").innerHTML = title.replace(title.match(".mp4"), "");
source: https://developer.mozilla.org/en-US/docs/DOM/element.innerHTML
The <title> element is an invisible one, it is only displayed indirectly - in the window or tab title. This means that you want to change whatever is displayed in the window/tab title and not the HTML code itself. You can do this by changing the document.title property:
function remove_mp4()
{
document.title = document.title.replace(title.match(".mp4"), "");
}