RegEx to identify guid or a number - javascript

I have regex for guid:
/^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$/i
And regex to match a number:
/^[0-9]*$
But I need to match either a guid or a number. Is there a way to do it matching a single regex. Or should I check for guid and number separately.

Use | in a regular expression to match either what comes before or what comes after:
const re = /^([0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12})|[0-9]+$/i;
console.log('11111111-1111-1111-8111-111111111111'.match(re)[0]);
console.log('5555'.match(re)[0]);

You can use | operator between two regex expressions. You can use them as given below
/(^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$/i) | (^[0-9]*$)/

Yes, there are many ways for this. One is to OR the matches in an if statement:
var reg1 = /^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$/i;
var reg2 = /^[0-9]*$/;
var text = " ... ";
if (reg1.test(text) || reg2.test(text)) {
// do your stuff here
}
Another approach is ORing in the RegExp itself:
var regex = /(^[0-9]*)|^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$/i;
var text = " ... ";
if (regex.test(text)) {
// do your stuff here
}

Related

JavaScript regular expression for two-letter tokens separated by commas

I am trying to get the regular expression that accepts only characters with specific pattern like two characters separated by comma, but I am not able to get it.
Here i included the acceptable sting
string = ab,ca,ls,gz,tv......
I tried:
/^([a-zA-Z]{2},)|([a-zA-Z]{2})*$/
but it is not working as expected.
Try using /^[a-z]{2}(?:,[a-z]{2})*$/i instead (the | inside your pattern was problematic):
var string = 'ab,ca,ls,gz,tv'
var regex = /^[a-z]{2}(?:,[a-z]{2})*$/i
console.log(regex.test(string)) //=> true
If I'm understanding you correctly, then you're trying to get (capture) the 2 characters, with the condition that they're within the bounds of a comma or at the start or end of a line:
(?:^|,)([a-zA-Z]{2})(?=,|$)
Live preview
var string = "ab,ca,ls,gz,tv";
const regex = /(?:^|,)([a-zA-Z]{2})(?=,|$)/g;
match = regex.exec(string);
while (match != null) {
console.log(match[1]);
match = regex.exec(string);
}
The above outputs:
ab
ca
ls
gz
tv
Try this.
/^[a-z]{2}(,[a-z]{2})*$/i
var string1 = "ab,ca,ls,gz,tv"
var string2 = "ab,c,ls"
var string3 = "ab,ca"
var regex = /^[a-z]{2}(,[a-z]{2})*$/i
document.getElementById("test").innerHTML =
regex.test(string1) + "<br>" + // true
regex.test(string2) + "<br>" + // false
regex.test(string3) // true
<p id="test"></p>

Regular Expression to match compound words using only the first word

I am trying to create a regular expression in JS which will match the occurences of box and return the full compound word
Using the string:
the box which is contained within a box-wrap has a box-button
I would like to get:
[box, box-wrap, box-button]
Is this possible to match these words only using the string box?
This is what I have tried so far but it does not return the results I desire.
http://jsfiddle.net/w860xdme/
var str ='the box which is contained within a box-wrap has a box-button';
var regex = new RegExp('([\w-]*box[\w-]*)', 'g');
document.getElementById('output').innerHTML=str.match(regex);
Try this way:
([\w-]*box[\w-]*)
Regex live here.
Requested by comments, here is a working example in javascript:
function my_search(word, sentence) {
var pattern = new RegExp("([\\w-]*" + word + "[\\w-]*)", "gi");
sentence.replace(pattern, function(match) {
document.write(match + "<br>"); // here you can do what do you want
return match;
});
};
var phrase = "the box which is contained within a box-wrap " +
"has a box-button. it is inbox...";
my_search("box", phrase);
Hope it helps.
I'll just throw this out there:
(box[\w-]*)+
You can use this regex in JS:
var w = "box"
var re = new RegExp("\\b" + w + "\\S*");
RegEx Demo
This should work, note the 'W' is upper case.
http://www.w3schools.com/jsref/jsref_obj_regexp.asp
\Wbox\W
It looks like you're wanting to use the match with a regex. Match is a string method that will take a regex as an argument and return an array containing matches.
var str = "your string that contains all of the words you're looking for";
var regex = /you(\S)*(?=\s)/g;
var returnedArray = str.match(regex);
//console.log(returnedArray) returns ['you', 'you\'re']

Regular expression extract string

I have a string "#{Name; 11112121#xyz.com}"
I want to write a regular expression that extracts Name and 11112121 from the above string
This is what I tried.
function formatName(text){
var regex = /#\{([^;]+); ([^\}]+)\}/
return text.replace(
regex,
'$1, $2'
);
}
The above gives Name, 11112121#xyz.com. But I want only Name, 11112121
try this
var regex = /#\{([^;]+); ([^\}]+)(#.*)\}/
$1 => Name
$2=> 11112121
Here is the working example
Use match instead, like this:
var regex = /#\{([^;]+);\s+([^#]+)/;
var matches = text.match(regex);
alert(matches[1] + ', ' + matches[2]);
http://jsfiddle.net/rooseve/bM2U6/
If you want to match everything until the # character, you can use
var regex = /#\{([^;]+); ([^#]+)/
If you need to verify that the string also contains a } after that, you can add that to the end:
var regex = /#\{([^;]+); ([^#]+)[^}]*\}/

Use dynamic (variable) string as regex pattern in JavaScript

I want to add a (variable) tag to values with regex, the pattern works fine with PHP but I have troubles implementing it into JavaScript.
The pattern is (value is the variable):
/(?!(?:[^<]+>|[^>]+<\/a>))\b(value)\b/is
I escaped the backslashes:
var str = $("#div").html();
var regex = "/(?!(?:[^<]+>|[^>]+<\\/a>))\\b(" + value + ")\\b/is";
$("#div").html(str.replace(regex, "" + value + ""));
But this seem not to be right, I logged the pattern and its exactly what it should be.
Any ideas?
To create the regex from a string, you have to use JavaScript's RegExp object.
If you also want to match/replace more than one time, then you must add the g (global match) flag. Here's an example:
var stringToGoIntoTheRegex = "abc";
var regex = new RegExp("#" + stringToGoIntoTheRegex + "#", "g");
// at this point, the line above is the same as: var regex = /#abc#/g;
var input = "Hello this is #abc# some #abc# stuff.";
var output = input.replace(regex, "!!");
alert(output); // Hello this is !! some !! stuff.
JSFiddle demo here.
In the general case, escape the string before using as regex:
Not every string is a valid regex, though: there are some speciall characters, like ( or [. To work around this issue, simply escape the string before turning it into a regex. A utility function for that goes in the sample below:
function escapeRegExp(stringToGoIntoTheRegex) {
return stringToGoIntoTheRegex.replace(/[-\/\\^$*+?.()|[\]{}]/g, '\\$&');
}
var stringToGoIntoTheRegex = escapeRegExp("abc"); // this is the only change from above
var regex = new RegExp("#" + stringToGoIntoTheRegex + "#", "g");
// at this point, the line above is the same as: var regex = /#abc#/g;
var input = "Hello this is #abc# some #abc# stuff.";
var output = input.replace(regex, "!!");
alert(output); // Hello this is !! some !! stuff.
JSFiddle demo here.
Note: the regex in the question uses the s modifier, which didn't exist at the time of the question, but does exist -- a s (dotall) flag/modifier in JavaScript -- today.
If you are trying to use a variable value in the expression, you must use the RegExp "constructor".
var regex = "(?!(?:[^<]+>|[^>]+<\/a>))\b(" + value + ")\b";
new RegExp(regex, "is")
I found I had to double slash the \b to get it working. For example to remove "1x" words from a string using a variable, I needed to use:
str = "1x";
var regex = new RegExp("\\b"+str+"\\b","g"); // same as inv.replace(/\b1x\b/g, "")
inv=inv.replace(regex, "");
You don't need the " to define a regular expression so just:
var regex = /(?!(?:[^<]+>|[^>]+<\/a>))\b(value)\b/is; // this is valid syntax
If value is a variable and you want a dynamic regular expression then you can't use this notation; use the alternative notation.
String.replace also accepts strings as input, so you can do "fox".replace("fox", "bear");
Alternative:
var regex = new RegExp("/(?!(?:[^<]+>|[^>]+<\/a>))\b(value)\b/", "is");
var regex = new RegExp("/(?!(?:[^<]+>|[^>]+<\/a>))\b(" + value + ")\b/", "is");
var regex = new RegExp("/(?!(?:[^<]+>|[^>]+<\/a>))\b(.*?)\b/", "is");
Keep in mind that if value contains regular expressions characters like (, [ and ? you will need to escape them.
I found this thread useful - so I thought I would add the answer to my own problem.
I wanted to edit a database configuration file (datastax cassandra) from a node application in javascript and for one of the settings in the file I needed to match on a string and then replace the line following it.
This was my solution.
dse_cassandra_yaml='/etc/dse/cassandra/cassandra.yaml'
// a) find the searchString and grab all text on the following line to it
// b) replace all next line text with a newString supplied to function
// note - leaves searchString text untouched
function replaceStringNextLine(file, searchString, newString) {
fs.readFile(file, 'utf-8', function(err, data){
if (err) throw err;
// need to use double escape '\\' when putting regex in strings !
var re = "\\s+(\\-\\s(.*)?)(?:\\s|$)";
var myRegExp = new RegExp(searchString + re, "g");
var match = myRegExp.exec(data);
var replaceThis = match[1];
var writeString = data.replace(replaceThis, newString);
fs.writeFile(file, writeString, 'utf-8', function (err) {
if (err) throw err;
console.log(file + ' updated');
});
});
}
searchString = "data_file_directories:"
newString = "- /mnt/cassandra/data"
replaceStringNextLine(dse_cassandra_yaml, searchString, newString );
After running, it will change the existing data directory setting to the new one:
config file before:
data_file_directories:
- /var/lib/cassandra/data
config file after:
data_file_directories:
- /mnt/cassandra/data
Much easier way: use template literals.
var variable = 'foo'
var expression = `.*${variable}.*`
var re = new RegExp(expression, 'g')
re.test('fdjklsffoodjkslfd') // true
re.test('fdjklsfdjkslfd') // false
Using string variable(s) content as part of a more complex composed regex expression (es6|ts)
This example will replace all urls using my-domain.com to my-other-domain (both are variables).
You can do dynamic regexs by combining string values and other regex expressions within a raw string template. Using String.raw will prevent javascript from escaping any character within your string values.
// Strings with some data
const domainStr = 'my-domain.com'
const newDomain = 'my-other-domain.com'
// Make sure your string is regex friendly
// This will replace dots for '\'.
const regexUrl = /\./gm;
const substr = `\\\.`;
const domain = domainStr.replace(regexUrl, substr);
// domain is a regex friendly string: 'my-domain\.com'
console.log('Regex expresion for domain', domain)
// HERE!!! You can 'assemble a complex regex using string pieces.
const re = new RegExp( String.raw `([\'|\"]https:\/\/)(${domain})(\S+[\'|\"])`, 'gm');
// now I'll use the regex expression groups to replace the domain
const domainSubst = `$1${newDomain}$3`;
// const page contains all the html text
const result = page.replace(re, domainSubst);
note: Don't forget to use regex101.com to create, test and export REGEX code.
var string = "Hi welcome to stack overflow"
var toSearch = "stack"
//case insensitive search
var result = string.search(new RegExp(toSearch, "i")) > 0 ? 'Matched' : 'notMatched'
https://jsfiddle.net/9f0mb6Lz/
Hope this helps

Regex to grab strings between square brackets

I have the following string: pass[1][2011-08-21][total_passes]
How would I extract the items between the square brackets into an array? I tried
match(/\[(.*?)\]/);
var s = 'pass[1][2011-08-21][total_passes]';
var result = s.match(/\[(.*?)\]/);
console.log(result);
but this only returns [1].
Not sure how to do this.. Thanks in advance.
You are almost there, you just need a global match (note the /g flag):
match(/\[(.*?)\]/g);
Example: http://jsfiddle.net/kobi/Rbdj4/
If you want something that only captures the group (from MDN):
var s = "pass[1][2011-08-21][total_passes]";
var matches = [];
var pattern = /\[(.*?)\]/g;
var match;
while ((match = pattern.exec(s)) != null)
{
matches.push(match[1]);
}
Example: http://jsfiddle.net/kobi/6a7XN/
Another option (which I usually prefer), is abusing the replace callback:
var matches = [];
s.replace(/\[(.*?)\]/g, function(g0,g1){matches.push(g1);})
Example: http://jsfiddle.net/kobi/6CEzP/
var s = 'pass[1][2011-08-21][total_passes]';
r = s.match(/\[([^\]]*)\]/g);
r ; //# => [ '[1]', '[2011-08-21]', '[total_passes]' ]
example proving the edge case of unbalanced [];
var s = 'pass[1]]][2011-08-21][total_passes]';
r = s.match(/\[([^\]]*)\]/g);
r; //# => [ '[1]', '[2011-08-21]', '[total_passes]' ]
add the global flag to your regex , and iterate the array returned .
match(/\[(.*?)\]/g)
I'm not sure if you can get this directly into an array. But the following code should work to find all occurences and then process them:
var string = "pass[1][2011-08-21][total_passes]";
var regex = /\[([^\]]*)\]/g;
while (match = regex.exec(string)) {
alert(match[1]);
}
Please note: i really think you need the character class [^\]] here. Otherwise in my test the expression would match the hole string because ] is also matches by .*.
'pass[1][2011-08-21][total_passes]'.match(/\[.+?\]/g); // ["[1]","[2011-08-21]","[total_passes]"]
Explanation
\[ # match the opening [
Note: \ before [ tells that do NOT consider as a grouping symbol.
.+? # Accept one or more character but NOT greedy
\] # match the closing ] and again do NOT consider as a grouping symbol
/g # do NOT stop after the first match. Do it for the whole input string.
You can play with other combinations of the regular expression
https://regex101.com/r/IYDkNi/1
[C#]
string str1 = " pass[1][2011-08-21][total_passes]";
string matching = #"\[(.*?)\]";
Regex reg = new Regex(matching);
MatchCollection matches = reg.Matches(str1);
you can use foreach for matched strings.

Categories