I recently made a script to get info from the Adwords API report KEYWORDS_PERFORMANCE_REPORT that outputed the information to a google sheet and it worked fine.
I decided to make another report for extensions all i basically did was copy and past the old code changing the URL for the google sheet and which report it should use PLACEHOLDER_REPORT instead of the keyword one, as well as some of the metrics.
The script runs without saying that anything is wrong but it doesn't output the values to where its supposed to, or at all for that matter.
function processAccount()
{
var report = AdWordsApp.report(
"SELECT AccountDescriptiveName, CampaignName, ExtensionPlaceholderCreativeId, ExtensionPlaceholderType " +
"FROM PLACEHOLDER_REPORT " +
"WHERE CampaignStatus = ENABLED " +
"DURING LAST_7_DAYS",
{apiVersion: 'v201705'});
var rows = report.rows();
if (rows.hasNext())
{
writeReport(rows);
}
}
function writeReport(rows)
{
var spreadsheet = validateAndGetSpreadsheet(URL);
// Clear all rows in the Details tab of the spreadsheet below the header row.
var clearRange = spreadsheet.getRangeByName('Headers')
.offset(1, 0, spreadsheet.getSheetByName('Details')
.getDataRange().getLastRow())
.clearContent();
// Build each row of output values in the order of the Report tab columns.
var outputValues = [];
while (rows.hasNext())
{
var row = rows.next();
outputValues.push([
row["AccountDescriptiveName"],
row["CampaignName"],
row["ExtensionPlaceholderCreativeId"],
row["ExtensionPlaceholderType"],
]);
}
// Find the first open row on the Report tab below the headers and create a
// range large enough to hold all of the failures, one per row.
var lastRow = spreadsheet.getSheetByName('Details')
.getDataRange().getLastRow();
var headers = spreadsheet.getRangeByName('Headers');
var outputRange = headers
.offset(lastRow - headers.getRow() + 1, 0, outputValues.length);
Logger.log("outputValue length is "+outputValues.length);
outputRange.setValues(outputValues);
Logger.log(outputValues[0]);
spreadsheet.getRangeByName('Date').setValue(new Date());
}
I know its finding the sheet because it clears the rows below the header like its supposed to and puts the date and time when it is run.
The logger shows that outputValue has a length of 293 so its definitly getting stuff and also logs the stuff at outputValue[0] so i dont know why it wont write to the sheet.
I called the adwords helpline but they said thearen't't trained in the api stuff so they don't know whats up, and i've googled it with no success
Everytime it runs you just want the new values, so I suggest using
spreadsheet.getRange(1, 1, data.length, 4).setValues(outputValues);
Replace your last line with this one, the last arguments is how many columns you will write, so in your case is 4, also change your code's logic so it will write the values in the end, not at every iteration!
Turns out i had messed up the output range it was outputting it about 120 rows lower than it was supposed toi do if id just scrolled down i would of seen it. fixed that and now all is fine.
Related
I've been having problems with Highcharts when requesting from a google sheet, few days ago it was all good, but suddenly it was throwing an error 404, and I don't know what to do. Higcharts only ask you to put the google spreadsheet key, and the number of the tab, and nothing else. I want to change the URL that Higcharts makes the request but I don't know how.
Error:
data.src.js:124 GET https://spreadsheets.google.com/feeds/cells/1YtSfF3-9kzx1G6zwllLX9GhkVgufSUjQyKVI3Ken-AA/2/public/values?alt=json 404
It seems like a google issue: https://support.google.com/docs/thread/121088347/retrieving-data-from-sheets-results-in-404-error-50-of-the-time
feeds is the older version of Sheets API and it's shut down.
See Google's announcement here https://cloud.google.com/blog/products/g-suite/migrate-your-apps-use-latest-sheets-api
Try tu use this function to get values as json
function getJson(id,gid){
var txt = UrlFetchApp.fetch(`https://docs.google.com/spreadsheets/d/${id}/gviz/tq?tqx=out:json&tq&gid=${gid}`).getContentText();
var jsonString = txt.match(/(?<="table":).*(?=}\);)/g)[0]
var json = JSON.parse(jsonString)
return(json)
}
with id of the spreadsheet and gid of your sheet (may be 0)
note that first row is dedicated to labels, then rows[0] corresponds to row#2 and c[0] corresponds to column A
if you want to retrieve B1 (column 2 row 1) : json.cols[1].label
if you want to retrieve B2 (column 2 row 2) : json.rows[0].c[1].v
I live oversees (military) and get emails when I have a package that arrives at my Post Office and is ready for pickup. I have a Zapier PARSER email account and associated ZAP setup that pulls the data from the email and updates a Google Sheets document with its shelf location, tracking number, and a few other important things from the email so the clerks can get my stuff quickly. It works great. In that same workbook, I have another sheet that I update using an app on my phone to scan tracking barcodes to when I physically pick up the package. On the first sheet I have a basic VLOOKUP function that looks for the tracking number in the scanned list to mark it off as PICKED UP (I get a lot of packages )
I have to manually go in and drag the function down when the ZAP creates a new row. it's not difficult, but i want to have it all automatic. that's what computers are for! I created a google script from the SCRIPT editor on my sheet to do it (I think)
function onEdit(e)
{
var row = e.range.getRow(); //Determine the Row # Just added
var sheet = e.range.getSheet(); //Determine the Sheet, probably not needed
var row_string = row.toString(); //Convert the Row Number to a string.
var start_string = "=VLOOKUP(B"; //this is a fixed part of the function I need in the E column of this row.
var end_string = ", 'Scanned Packages Fixed'!A:B, 2, FALSE)"; //This is the fixed part of the function at the end of the row.
var set_lookup_cell = start_string.concat(row_string, end_string); //Smash the strings together to build a full function
sheet.getRange(row,5).setValue(set_lookup_cell); //Put the full function of the string into the proper cell (E)
}
I am not 100% up on how this would get called automatically or if I am missing a way to link it to the sheet itself. When I hit "run" on the code I got this:
TypeError: Cannot read property 'range' of undefined (line 3, file "Code")
I went into my sheet and just added something in the first column of a new row to see what happened, nothing did.
Any help would be super appreciated!
EDIT: Basically, I need Column E of the row to say this
=VLOOKUP(B63, 'Scanned Packages Fixed'!A:B, 2, FALSE) [Where 63 is the row#]
Turns out, the code above does work. I am just not patient and didn't let the sheet update and script run automatically after an update to a row.
Turns out, this isn't triggered when the zap populates the sheet... Only if I do.
I am trying to move my team's productivity to another sheet via Apps Script.
On the sheet "Prod" you can see the weekly productivity the team has put in. The "Approved" column has checkboxes where the work can be manually verified.
The second sheet is the "Archives" sheet. Where the Apps Script will move all of the responses from the "Prod" sheet over there.
Apps Script Code
function archive() {
// Get the information
var ss = SpreadsheetApp.getActiveSpreadsheet();
var s = ss.getSheetByName('Prod');
var a = ss.getSheetByName('Archives');
var data = s.getRange('A2:F').getValues();
// Archive the results
for (i in data) {
var write = data[i];
a.appendRow(write);
}
// Clear the results
s.getRange('A2:E').clear();
s.getRange('F2:F').uncheck();
}
The Problem
The code works perfectly fine, however, when it is moving the "Prod" responses over to the "Archives" it includes the empty rows. This is because in the "Approved" column the checkbox is technically false, which means it's included. How would I go about changing the code to only transfer rows that have data in the A column?
Thanks!
I believe your goal as follows.
You want to copy the values from Prod to Archives when the value of column "A" in Prod is not empty.
Modification points:
In your script, all values of var data = s.getRange('A2:F').getValues(); is copied to Archives. So in this case, it is required to check the column "A" of data.
When appendRow() is used in a loop, the process cost will be high. Ref
When above points are reflected to your script, it becomes as follows.
Modified script:
function archive() {
// Get the information
var ss = SpreadsheetApp.getActiveSpreadsheet();
var s = ss.getSheetByName('Prod');
var a = ss.getSheetByName('Archives');
var data = s.getRange('A2:F').getValues();
// Archive the results <--- I modified this part.
var copyValues = data.filter(([a]) => a.toString() != "");
a.getRange(a.getLastRow() + 1, 1, copyValues.length, copyValues[0].length).setValues(copyValues);
// Clear the results
s.getRange('A2:E').clear();
s.getRange('F2:F').uncheck();
}
References:
Benchmark: Reading and Writing Spreadsheet using Google Apps Script
filter()
setValues(values)
I'm trying to connect Google Sheets to JIRA to gather the data for updating reports automatically.
I'm struggling however with a couple of points in this modified script.
I want to return the component field but calling the name field returns undefined.
var components = data["issues"][id].fields.components.name;
If I remove the name field, then I get the following response:
{name=#####, self=https://www.#########/rest/api/2/component/26357, id=26357}
The second issue is that only a handful of issues are being rendered. As far as I can see my REST call looks OK, as does the writing to tables:
var sheet = SpreadsheetApp.getActiveSpreadsheet().getActiveSheet(); //select active spreadsheet
sheet.getRange(2, 1, issuessss.length, 7).setValues(issuessss); // write from cell A2
break;
Anyone have any ideas that could help?
The field component is an array so components.name does not exist (i.e components[0].name would work).
Before setting the values, try to execute a flush first.
This is a followup to a question I asked yesterday on the Google Apps Script Office Hours Hangout.
The goal of my final script is to create an election process for student elections at the high school where I work using Google Forms. The script has three parts: 1) Create Unique "Voting IDs" (a random 6-digit code) 2) Merge the student data (Name, Homeroom, & Voting ID) on with a template document that will create specific voting instruction for each student. (i.e. an old-fashioned mail merge) 3) Verify the results by checking Voting ID's and removing duplicate votes.
The part of the script that I am having trouble with is the student data merge (step 2). The first dataset is the only one that works. The rest show up as "DocumentBodySection". I have a feeling it is either how I am copying the text from the Document Template or how I am adding the text to the new document.
Spreadsheet w/ Data: https://docs.google.com/spreadsheet/ccc?key=0AierVcXWELCudFI1LU10RnlIVHNsUm11a0dDWEV6M1E
Document Template: (see followup comment for url)
Document Created by Script: https://docs.google.com/document/d/12r2D9SpIVmQYVaasMyMWKjHz6q-ZZyIMEBGHTwlQct8/edit
//Get Settings & Data
ss = SpreadsheetApp.getActiveSpreadsheet();
source_sheet = ss.getSheetByName("Student Data");
settings_sheet = ss.getSheetByName("SETTINGS");
results_column = settings_sheet.getRange("B19").getValue();
source_column = settings_sheet.getRange("B18").getValue();
source_lastrow = source_sheet.getLastRow();
docTemplateID = settings_sheet.getRange("B13").getValue();
docCopyName = settings_sheet.getRange("B14").getValue();
//Merge Student Data with Document
function SendDataMerge () {
// Open docTemplate and Copy Contents to entryTemplate
var docTemplate = DocumentApp.openById(docTemplateID);
var entryTemplate = docTemplate.getActiveSection();
docTemplate.saveAndClose();
// Make a NEW copy of docTemplate
var docTemplate = DocsList.getFileById(docTemplateID);
var docCopy = DocsList.copy(docTemplate, docCopyName);
var docCopyID = docCopy.getId();
// Create Array of Student Data (First, Last, Grouping, VID)
var data = source_sheet.getRange("A2:D"+source_lastrow).getValues();
// Open docCopy for Editing & Clear Contents
var doc = DocumentApp.openById(docCopyID);
var docText = doc.editAsText();
// Run through Student Data
for(var i=0; i<5 /*data.length*/; i++) { //For testing, limit this to 5 entries
var lastName = data[i][0];
var firstName = data[i][1];
var grouping = data[i][2];
var vid = data[i][3];
docText.replaceText('keyLastName', lastName);
docText.replaceText('keyFirstName', firstName);
docText.replaceText('keyGrouping', grouping);
docText.replaceText('keyVID', vid);
docText.appendText('\n*** Appended Text (End of entry) ***');
docText.appendText(entryTemplate);
}
// Save and Close
doc.saveAndClose();
}
I worked around this issue by creating a copy of the template, doing the text replacement and then appending the template elements from the original document into the copy. In particular, I used: var copyTables = templateDoc.getTables(); to fetch and store the tables (as all of my template data was contained in a table) and copyDoc.appendTable(copyTables[0].copy() ); to append the copy (the .copy() at the end seems to work the real magic). This provides the flexibility of updating the template in the friendly Documents interface without having to see a programmer.
I think the problem is with this line:
docText.appendText(entryTemplate);
The variable entryTemplate holds a DocumentBodySection, which is why you are seeing that in the output. If you are trying to append another copy of the original template text you'll need to store that before you enter the loop.
I agree with Eric that appendText(entryTemplate) isn't going to do what you want it to do.
Since you're trying to create one large document with all the students, using a "template" and replacing the text isn't going to work well. I'd suggest instead, creating the "template" in code using the api calls that produce the formatting you want. Then it makes it simple to keep appending new pages of student instructions. Although I think you may run into slowness when the document gets large... I don't know how many students you have.