Using node.js, I wanted to create a kiosk application with a RFID Reader attached to the kiosk. In order to access my RFID Reader, I installed the node-hid library (https://github.com/node-hid/node-hid). However, when I tried to run the application, an error occured, says:
Uncaught Exception
Error: The module 'D:\Projects\Electron\SelfService\node_modules\node-hid...\build\HID.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 72. This version of Node.js required NODE_MODULE_VERSION 73.
I already updated the library and the node.js version to the latest update, but since the library is kinda old, it doesn't get any more update.
I tried to downgrade the node version, however there aren't any helpful tutorial I can find out there. I know there are many tutorial that explained how to install the older version of node, but I can't simply know what version of node I need from the error message displayed above.
I need to get the device readable by the application. If somehow, it's impossible to use the node-hid library, what is the latest library you recommended to access the RFID Reader from the application?
Note: I'm familiar with web development, including Javascript language, but Node.js is a new experience for me. I'll try my best to provide informations regarding my project, but if there are some mistakes with how I described my problem or if I have some difficulties in understanding your answers, please bear with me.
EDIT: I forgot to mention I'm on Windows 10, the node version I installed is 10.16.3
First Try this command -
Uninstall the electron first then try below command
sudo npm install --save-dev electron#4.0.0
sudo npm i --save-dev electron-releases#4.0.0
And also try to update chrome
Above is solution be sure minimum using Linux 16.04 with x64 processor and for npm version change see below
For NPM Version Downgrade of Linux/Ubuntu
sudo npm install -g npm#version
example-
sudo npm install -g npm#6.9
For Windows - start command prompt administrator
npm install -g npm#version
example-
npm install -g npm#6.9
You can uninstall the current node and then re-install the desired node version.
But the best practice will be installing node.js using the nvm aka node version manager.
Using nvm you can easily switch between different node version as well as different npm version.
Here's a quick start for installing node using nvm in both
windows, linux and unix platform.
NVM Official doc for unix and linux.
NVM alternative for windows
I'm getting the following error:
TypeError: fs.copyFile is not a function
The problem is because the function was added to Node in version 8.5. I was running the LTS version when I began this project, but after I realized I needed a newer function I updated my installation of node, but the program still seems to be running an older version. This is an electron program.
When I run
node -v
I get back
v8.8.1
but inside my program, when I run code to check what version I'm running it gives me 7.9.
How can I upgrade my project so it can run a newer version of NodeJS?
I am starting to learn Nodejs and tried to install it.
Now, when I do node -v I get v4.4.4 and when I do nodejs -v, I get v0.10.45
which node gives /usr/local/bin/node, which nodejs gives /usr/bin/nodejs
I need v4.4.4. Because of those different results I am not sure to start.
What can I do?
I recommend installing NVM (node version manager). It makes dealing with multiple node version installations really nice. Digital Ocean has a good tutorial on doing that here:
https://www.digitalocean.com/community/tutorials/how-to-install-node-js-on-an-ubuntu-14-04-server
Once you've installed NVM you can likely remove your other node versions and all of your programs that use node will default to whatever version you set as the default with nvm.
I try to use node-vlc with nw.js (v0.12.0-alpha2). When i launch my app without nw.js it works, but when i launch it with nw.js i got an error:
Uncaught Error: Module did not self-register.", source: /home/alexis/Bureau/dev/jukebox/node_modules/vlc/node_modules/ffi/node_modules/bindings/bindings.js (84)
I tried some commands with nw-gyp but it couldn't help me.
I am on Ubuntu 14, 64-bit.
If you've upgraded node then npm rebuild might fix this for you
For me:
rm -r node_modules then
npm install
I had a similar issue with another product and my fix was to change the version of node I was using. I was using 0.12.0 and changed back to 0.10.26.
Personally, I use NVM to handle node version changing. With NVM installed it's as simple as running
nvm use 0.10.26
Or setting the default version to 0.10.26
nvm alias default 0.10.26
Hopefully this helps you out - our issues came from different products but the solution may be the same.
I had similar problem.
/Users/user/NodeAddons/bridge/node_modules/bindings/bindings.js:83
Error: Module did not self-register.
In my case I was doing a C/C++ Add-on, and I had forgotten to export the add-on, in my main.cc was missing the code below:
void Init(v8::Handle<v8::Object> exports) {
NODE_SET_METHOD(exports, "method", method);
}
NODE_MODULE(method, Init);
Hope this helps others!
Thanks :)
I've add the same issue because I installed to modules as sudo...
Removing the node modules folder and reinstalling as normal user fixed it.
For me npm rebuild or npm update didn't work. I had to remove the node_modules folder and run npm install to install them again.
I once had this problem when creating a multi-file c++ addon. In my binding.gyp file I had:
"sources": ["src/*.cc", "src/*.h" ]
And my project contained several *.cc files. However, the NODE_MODULE() macro was called only on one file which imported the rest of the files. But node expects that it is called on the frist *.cc file listed in sources. So I had to change sources to explicitly add that file to the beginning
For me, running npm update worked
I was getting an internal error: Module did not self-register.
Deleted the node_modules folder
ran npm install
It worked just fine.
I had this error with Snappy. Was using Node 11. Checked Snappy's NPM page https://www.npmjs.com/package/snappy where they listed which versions of node they supported.
Deleting node_modules folder rm -rf node_modules and then reinstalling using the correct version of Node resolved it.
One of the versions they supported on Linux at the time of this writing was Node version 12.
nvm deactivate 11
nvm uninstall 11
nvm install 12
nvm use 12
Problem solved
Another cause of this problem: if you're using pm2, then after upgrading node you may need to reinstall pm2. Test whether pm2 is the issue by running your app
without pm2 node server.js
then with pm2: pm2 start server.js.
Proper way to update PM2 after updating Node.js
I had this same issue with 0.12 and io.js 1.3.0, reverting to Node.js 0.10 fixed the issue.
Rebuild your C++ add-ons.
Did you encounter something like this?
Module did not self-register: '…\node_modules\#u4\opencv4nodejs\build\Release\opencv4nodejs.node
It’s likely that you have just updated your Node.js. Once you updated your Node.js, you need to rebuild your C++ add-ons, Node.js packages written in C++.
Why
When you build Node.js’ C++ add-ons, they get compiled into require-able .node files and linked to the currently installed Node.js ABI library, which is not compatible with other versions of it. Your packages were built only compatible with the specific version of Node.js.
How
Firstly, try npm rebuild. If your C++-add-on-based packages have a build script, it’ll do. If it doesn’t, you need to manually build your C++ native add-on packages. Do again what you did when you were installing such packages. Refer to the building instructions in the packages’ documentations to rebuild them. Or try reinstalling (npm install) them.
I had the same problem. My script that was referencing a global reference script had an invalid reference. I took off that invalid reference and the error was gone. My error message had no indication of that particular invalid reference which made it harder to debug. But 'Uncaught Error: Module did not self-register' was the message I was getting.
This also happen in my other project. For some reason, it wouldn't recognize the reference path if one of the characters are uppercase. Even thought, the upper-casing was the correct spelling of the path.
I had this issue while setting up my Cypress project.
I found out the issue was caused because Cypress uses node from its bundle version by default (which was version 8.0 in my case) , whilst the package I wanted to use required the node version to be 10 or higher.
I did have node 12.0 installed on my machine but since cypress was not using that I had to add the line shown below in the settings file (cypress.json) to set the value for 'nodeVersion' to 'system', to tell cypress explicitly to use the node version installed on my machine.
Add this line to your settings file:
**"nodeVersion": "system"**
I'm trying to install node.js on a friend's computer. We had an old version (0.4.*), then installed n to update to a more recent version of node using n - node version manager
now instead of having an old version of node, we get
$ node -v
Segmentation fault
$ n --version
1.2.1
$ npm --version
Segmentation fault
When we type n the versions we installed show up but they are all greyed out. What's a Segmentation fault, why is it happening and how can we fix it?
Unless you're using something with binary dependencies (npm doesn't), segmentation fault means on of two things:
there is a bug in node.js core, and it should be reported
your node.js installation is broken
So you can solve this by reinstalling the most recent node.js version using a standard way from nodejs.org website. If it still segfaults (highly unlikely, but possible in some non-standard environments), report it to node.js core team.