I want to create an array of JSON object without a key.How can this is achieved ..??
for example [{8,0,2}, {20,0,2}].
var hh = 9
var mm = 8
var qty = 2
var data = [];
data.push({hh,mm,qty})
it gives data like [{hh:9,mm:8,qty:2}]
I want array like [{9,8,2},{9,3,4}]
You example uses a new feature of ECMAScript 6 that is the shorthand syntax for initialising object properties. This line in your example:
data.push({hh,mm,qty});
is equivalent to this verbose one:
data.push({hh: hh, mm: mm, qty: qty});
An object in JavaScript will always have keys and values. There is no way to save just values in a plain object. However, there are two other solutions.
One is using an array:
data.push([hh, mm, qty]);
Note the square brackets substituting the curly ones. This will obviously push an array of three values onto the data array. When retrieving the values, you can just refer to their index, as an array's items will always retain their indices:
var data2 = [hh, mm, qty];
var hh2 = data2[0];
var mm2 = data2[1];
var qty2 = data2[2];
Another way of just "saving the values" is using a set, though the construction of a Set object will still require passing it an array:
data.push(new Set([hh, mm, qty]));
Accessing the data is less straightforward in this case, as the set will typically only let you iterate it. Unlike similar data structures in other languages, a JavaScript set will retain the order of inserted values. It can therefore be safely converted into an array:
var mySet = new Set([hh, mm, qty]);
var data3 = Array.from(mySet);
var hh3 = data3[0];
var mm3 = data3[1];
var qty3 = data3[2];
You can read more about sets here.
You can wrap it over another JSON object with a key I assume you want a JSON object.
Like this { [{8,0,2}, {20,0,2}] } but this with a problem - It is not a valid JSON.
I had a similar problem for one of my scenario. Then I realised
A top level JSON can't exist without a key!
Consider this example, you have another KV pair in JSON and also this array.
{
"somekey" : "somevalue",
[ {8,0,2}, {20,0,2} ]
}
You can fetch "somevalue" with the key "somekey". But how would you access the array? you can't :(
I would suggest you to use a top level key for the JSON and make this array as value of it's. Example:
{
"my array" : [ {8,0,2}, {20,0,2} ]
}
Without a key value pair, the object was not created. That's why its adding a key using the variable name
Look at this error. Its invalid code
var a = [{8,0,2}, {20,0,2}];
console.log(a)
You could push to an array instead of an object
var data = [];
var hh = 9
var mm = 8
var qty = 2
var data = [];
data.push([hh,mm,qty])
console.log(data)
You can't.
Object Literal Property Value Shorthands allow you to create an object where the property names are inferred from the variable names you use to pass the data into.
If you don't have variable names, then there is nothing for the JS engine to use to figure out what the property names should be.
Consider using a function instead.
console.log([time(8,0,2), time(20,0,2)]);
function time (hh, mm, qty) {
return {hh, mm, qty};
}
The result you get at the end makes sense. By doing {hh,mm,qty} you are effectively saying "Use the variable name as the key and its value as the value". It might help us more if you provide an example of how you intend to use the result and access the variables i.e. the shape of the object you want in the end.
That being said, there are a couple alternatives:
Using values as the keys
If you really wanted your object to look similar to {8,0,2} you could use those values as the keys (all keys get converted to strings anyways) so you could do the following:
var example1 = {8:undefined,0:undefined,2:undefined};
var example2 = {8:null,0:null,2:null};
var keys = [];
for(var name in example1) {
keys.push(name);
}
// keys = ["8","0","2"];
var otherKeys = Object.keys(example2);
// otherKeys = ["8","0","2"];
Setting the keys dynamically
var hh = 9;
var mm = 8;
var qty = 2;
var obj = {};
obj[hh] = null;
obj[mm] = null;
obj[qty] = null;
//obj = {9:null,8:null,2:null};
I'm not certain if this solves your problem or answers your question entirely but it might give you some more insight into what is happening and why. The above examples are a common way to create a quick lookup versus a dictionary with would have values in place of null or undefined.
Related
let obj = {};
obj[{key:"instagram"}] = "Akrixa";
obj[{key:"facebook"}] = "Coding with Akrixa";
console.log(obj[{key: "instagram"}]);
This is a problem in which I'm confused with 2nd and 3rd line of code, what does by those lines?
obj[{key:"instagram"}] = "Akrixa" is equivalent to
obj[({key:"instagram"}).toString()] = "Akrixa" since objects are keyed by strings. So it's equivalent to
obj["[object Object]"] = "Akrixa"
I think because obj[{key:"instagram"}] and obj[{key:"facebook"}] are the same object. When assign value for it, it has the same value. More detail: How to create dictionary and add key–value pairs dynamically?. I wish its help you
The second line obj[{key:"instagram"}] = "Akrixa"; creates a key within your obj [{key:"instagram}] (which is an object inside an array) and then sets the value of that key to Akrixa, and the third line does the same but with a different key and value.
It might be better to use obj["instagram"] = "Akrixa" and obj["facebook"] = "Coding with Akrixa" as to avoid excessive complication, and you can then refer to it with obj["instagram"] etc.
let obj = {};
obj["instagram"] = "Akrixa";
obj["facebook"] = "Coding with Akrixa";
console.log(obj["instagram"]);
I have a json string
["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"]
I need to get at the data only and I want to extract the string to get the following :
https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg
I have tried to use JSON.parse but this does not seem to work
Any help woul dbe appreciated
[] represents an array on JSON. {} represents an Object.
So in order to fetch the first element from you json string, you have to parse the string as a JSON element ;
var arr = JSON.parse('["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"]');
OR when you HAVE a json array already;
var arr = ["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"];
Then, go on and fetch the first value from your array which has index 0 as in all programming languages.
var url = arr[0];
It's seems to be a normal array not a JSON, but if you want you can treat it as JSON:
var image = JSON.parse('["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"]')[0];
console.log(image); //https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg
Be aware of the difference between an array, and a JSON object.
I have given some examples of the differences and how to access them.
// This is an array containing 1 value.
myobj = ["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"];
// it can be accessed by either the array name (since it only hase one value) or the array name and index of the value in cases where the array actually has more than one value.
var example1 = [myobj];
document.write("This is my single value array:<br>" + example1 + "<br><br>");
// This is probably best practice regardless of the number of items in the array.
var example2 = myobj[0];
document.write("Now im specificing the index, incase there are more that one urls in the array:<br>" + example1 + "<br><br>");
// This is a JSON object
myJsonObj = {"url":"https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"}
// You access the value of the URL like this:
var example3 = myJsonObj.url;
document.write("Here is the value from a JSON object:<br>" + example3 );
Hope this helps
Just use parse function:
var text = '["https://upload.wikimedia.org/wikipedia/commons/5/57/Cassini_Helene_N00086698_CL.jpg"]';
var obj = JSON.parse(text);
https://jsfiddle.net/esouc488/1/
For example I have this dynamic array which can be of any length but i am given two values of this array.
var arrName = ["firstName","lastName"];
And i have to make a json variable with exact given values for this dynamic array. Here are my approaches
Method 1: Error Unexpected type '['
var jsonValues = {arrName[0] : "Mark", arrName[1]: "Collins"}
Method 2: Works but it doesn't display the json contents when typing 'jsonValues' in the console, instead i get an Array type. I am not sure if this is acceptable because i want to JSON.stringify it and pass it via ajax to the php server.
var jsonValues = [{}];
jsonValues[arrName[0]] = "Jeffrey";
jsonValues[arrName[1]] = "Douglas";
You want
var jsonValues = {};
jsonValues[arrName[0]] = "Jeffrey";
jsonValues[arrName[1]] = "Douglas";
For a more generic version, see the object function in Underscore.
In ES6, which isn't yet supported in most browsers, there's also a syntax that does what you initially expected:
var jsonValues = {
[arrName[0]]: "Jeffrey",
[arrName[1]]: "Douglas",
};
See MDN Reference
I am creating javascript two dimensional array
code is :
var field_arr=[];
$(".dr").each(function(index){
Id=$(this).attr("id");
alert(dragId);
topPos=$("#"+ dragId).position().top;
left=$("#"+ dragId).position().left;
parentDiv=$("#"+dragId).parent().attr("id");
parentDiv= parentDiv.split('-');
paId=parentDiv[1];
field_arr[Id]=new Array();
field_arr[Id]['paId']=paId;
field_arr[Id]['top']=topPos;
field_arr[Id]['left']=left;
});
console.log(field_arr);
Output Is:
[undefined, [] left 140 paId "1" top 10
What is problem in It Any help Should be appreciated.
The problem is in the display method of your arrays. The information is there, but both alert and console.log will not show it to you because it is expected that the only interesting properties of arrays are the ones with numeric indexes.
In JavaScript, unlike PHP, objects are used as maps/associative arrays.
First to check that your information is actually there:
$(".dr").each(function(index){
var Id=$(this).attr("id");
console.log(Id, field_arr[Id]['paId'], field_arr[Id]['top'], field_arr[Id]['left']);
});
Now to make make the display methods work you can go about multiple ways, but the best one is to use objects instead:
var field_arr = Object.create(null); // replace with {} if you want to support IE8-
$(".dr").each(function(index){
var id = $(this).attr("id"); // added var to keep variable local
var drag = $("#"+dragId);
field_arr[id] = Object.create(null); // {}
field_arr[id]['paId'] = drag.parent().attr("id").split('-')[1];
field_arr[id]['top'] = drag.position().top;
field_arr[id]['left'] = drag.position().left;
});
console.log(field_arr);
Iterating over properties of objects is quite easy:
for (var id in field_arr) {
console.log(field_arr[id], field_arr[id]['paId'], 'etc');
}
Add a hasOwnProperty check if your object doesn't inherit from null (var obj = {} needs it, unlike var obj = Object.create(null))
you're storing values with a key string and its wrong because you declared your field_arr as a numerical array (well there's no such thing as associative array in javascript i think).
field_arr[Id] = new Array();
field_arr[Id]['paId']=paId; //this is wrong
You need to create an object to store in values as if they are associated with string keys. But literally they are object properties
redeclare it like this
field_arr[Id] = {}; //you create an object
field_arr[Id]['paId'] = paId; //create an object property named paId and store a value
field_arr[Id].paId = paId; //you can also access property paId like this
EDIT:
but to conform to you current code you can access your indexes using strings by accessing it like a property of an object. (Thanks to Tibos)
var field_arr=[];
...
...
field_arr[Id].paId = paId;
Assuming an object is initialized as following:
var myObj = {
"key1":"val1",
"key2":"val2",
"key3":"val3",
...
};
Can I retrieve key values like this?
var retrKey1 = myObj[0];
var retrKey2 = myObj[1];
var retrKey3 = myObj[2];
...
The issue I am trying to solve is that I need to pick random key values from this object. Generating a random number is not an issue, but:
How can I retrieve the number of keys in the object/map?
Can I retrieve the key values using a integer index like in arrays?
If not, what are my options?
The Object.keys method returns an array of object properties. You can index the array with numbers then.
var myObj = {
"key1":"val1",
"key2":"val2",
"key3":"val3",
...
};
var keys = Object.keys(myObj);
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/keys
No, because there's no ordering among property keys. If you want ordered keys, you need to work with an array.
You could define a structure like this :
var myObj = [
{key:"key1", val:"val1"},
...
];