Canvas animation with JavaScript. Random coordinates and speed at every initiation - javascript

Edited : Thanks to all for valuable time and effort. Finally I made this )) JSfiddle
I was just playing with canvas and made this. Fiddle link here.
... some code here ...
var cords = [];
for(var i = 50; i <= width; i += 100) {
for(var j = 50; j <= height; j += 100) {
cords.push({ cor: i+','+j});
}
}
console.log(cords);
var offset = 15,
speed = 0.01,
angle = 0.01;
cords.forEach(function(e1) {
e1.base = parseInt(Math.random()*25);
e1.rgb = 'rgb('+parseInt(Math.random()*255)+','+parseInt(Math.random()*255)+','+parseInt(Math.random()*255)+')';
});
setInterval(function() {
cords.forEach(function(e1) {
e1.base = parseInt(Math.random()*25);
e1.rgb = 'rgb('+parseInt(Math.random()*255)+','+parseInt(Math.random()*255)+','+parseInt(Math.random()*255)+')';
});
},5000);
function render() {
ctx.clearRect(0,0,width,height);
cords.forEach(function(e1) {
//console.log(e1);
ctx.fillStyle = e1.rgb;
ctx.beginPath();
var r = e1.base + Math.abs(Math.sin(angle)) * offset;
var v = e1.cor.split(',');
ctx.arc(v[0],v[1],r,0,Math.PI * 2, false);
ctx.fill();
});
angle += speed;
requestAnimationFrame(render);
}
render();
Was wondering if -
Coordinates can be made random, now they are fixed as you can see. After 5000 mil, balls will show up in various random cords but even at their fullest they won't touch each other.
Every ball has same speed for changing size, I want that to be different too. Meaning, After 5000 mil, they show up with different animation speeds as well.
Also any suggestion on improving code and making it better/quicker/lighter is much appreciated. Thank you !

TL;DR - See it running here.
Making the coordinates random:
This requires you to add some random displacement to the x and y coordinates. So I added a random value to the coordinates. But then a displacement of less than 1 is not noticeable. So you'd need to magnify that random number by a multiplier. That's where the randomizationFactor comes in. I have set it to 100 since that is the value by which you shift the coordinates in each iteration. So that gives a truly random look to the animation.
Making Speed Random:
This one took me a while to figure out, but the ideal way is to push a value of speed into the array of coordinates. This let's you ensure that for the duration of animation, the speed will remain constant and that gives you a smoother feel. But again multiplying the radius r with a value between 0 and 1 reduces the speed significantly for some of the circles. So I have added a multiplier to 3 to compensate slightly for that.
Ideally I'd put a 2, as the average value of Math.random() is 0.5, so a multiplier of 2 would be adequate to compensate for that. But a little experimentation showed that the multiplier of 3 was much better. You can choose the value as per your preference.
Your logic of generating the coordinates changes as follows:
for(var i = 50; i <= width;i += 100) {
for(var j = 51; j <= height;j += 100) {
var x = i + (Math.random() - 0.5)*randomizationFactor;
var y = j + (Math.random() - 0.5)*randomizationFactor;
cords.push({ cor: x+','+y, speed: Math.random()});
}
}
Your logic of enlarging the circles changes as follows:
function render() {
ctx.clearRect(0,0,width,height);
cords.forEach(function(e1) {
//console.log(e1);
ctx.fillStyle = e1.rgb;
ctx.beginPath();
var r = e1.base + Math.abs(Math.sin(angle)) * offset * e1.speed * 3;
var v = e1.cor.split(',');
ctx.arc(v[0],v[1],r,0,Math.PI * 2, false);
ctx.fill();
});
angle += speed ;
requestAnimationFrame(render);
}
Suggestion: Update the coordinates with color
I'd probably also update the location of circles every 5 seconds along with the colors. It's pretty simple to do as well. Here I've just created a function resetCoordinates that runs every 5 seconds along with the setBaseRgb function.
var cords = [];
function resetCoordinates() {
cords = [];
for(var i = 50; i <= width;i += 100) {
for(var j = 51; j <= height;j += 100) {
var x = i + (Math.random() - 0.5)*randomizationFactor;
var y = j + (Math.random() - 0.5)*randomizationFactor;
cords.push({ cor: x+','+y, speed: Math.random()});
}
}
}

UPDATE I did some fixes in your code that can make your animation more dynamic. Totally rewritten sample.
(sorry for variable name changing, imo now better)
Built in Math.random not really random, and becomes obvious when you meet animations. Try to use this random-js lib.
var randEngine = Random.engines.mt19937().autoSeed();
var rand = function(from, to){
return Random.integer(from, to)(randEngine)
}
Internal base properties to each circle would be better(more dynamic).
var circles = [];
// better to save coords as object neither as string
for(var i = 50; i <= width; i += 100)
for(var j = 50; j <= height; j += 100)
circles.push({
coords: {x:i,y:j}
});
We can adjust animation with new bouncing property.
var offset = 15,
speed = 0.005,
angle = 0.01,
bouncing = 25;
This is how setBaseRgb function may look like
function setBaseRgb(el){
el.base = rand(-bouncing, bouncing);
el.speed = rand(5, 10) * speed;
el.angle = 0;
el.rgb = 'rgb('+rand(0, 255)+','+rand(0, 255)+','+rand(0, 255)+')';
}
All your animations had fixed setInterval timeout. Better with random timeout.
cords.forEach(function(el){
// random timeout for each circle
setInterval(setBaseRgb.bind(null,el), rand(3000, 5000));
})
You forgot to add your base to your circle position
function render() {
ctx.clearRect(0,0,width,height);
circles.forEach(function(el) {
ctx.fillStyle = el.rgb;
ctx.beginPath();
var r = bouncing + el.base + Math.abs(Math.sin(el.angle)) * offset;
var coords = el.coords;
ctx.arc(
coords.x + el.base,
coords.y + el.base,
r, 0, Math.PI * 2, false
);
ctx.fill();
el.angle += el.speed;
});
requestAnimationFrame(render);
}
render();
Effect 1 JSFiddle
Adding this
if(el.angle > 1)
el.angle=0;
Results bubling effect
Effect 2 JSFiddle
Playing with formulas results this
Effect 3 JSFiddle

Related

How would I add sliders to increase the sides of my Polygons, and draw more of them without refreshing the page?

Currently I'm drawing vertices to create polygons, I would like to add sliders to allow a user to increase or decrease the amount of sides the polygons have and the amount drawn. Also having the canvas update with refreshing.
I've tried adding a slider to control the noOfSides but I've had no luck.
Thanks for your time and help.
let noOfShapes = 3;
let noOfSides;
let rx, ry, drx, dry, rd1, rd2, drd1, drd2;
let threshold = 1000;
let fillColour;
let strokeThick;
let sidesSlider;
function setup() {
createCanvas(1240, 1754);
noLoop();
// background(0, 230)
colorMode(RGB)
rectMode(CENTER);
strokeWeight(3);
//noOfSides = 3;
fillColour = random(0, 255);
sidesSlider = createSlider(4, 12, 3);
sidesSlider.position(width + 20, 0);
sidesSlider.style('width', '150px');
}
function draw() {
background(0, 230)
noOfSides = sidesSlider.value();
for (let x = 0; x < noOfShapes; x++) {
do {
rx = [];
ry = [];
rd1 = [];
rd2 = [];
for (let y = 0; y < noOfSides; y++) {
rx.push(random(10, width - 20));
ry.push(random(10, height - 20));
rd1.push(rx[y] * 1 + ry[y] * 1);
rd2.push(rx[y] * 1 - ry[y] * 1);
}
drx = max(rx) - min(rx);
dry = max(ry) - min(ry);
drd1 = max(rd1) - min(rd1);
drd2 = max(rd2) - min(rd2);
}
while (drx < threshold || dry < threshold || drd1 < threshold || drd2 < threshold)
beginShape();
stroke(255);
fill(random(1, 255), random(1, 255), random(1, 255), 150);
for (let y = 0; y < rx.length; y++) {
vertex(rx[y], ry[y]);
}
endShape(CLOSE);
}
for (let x = 20; x <= width; x = x + 20) {
blendMode(DODGE);
stroke(255);
beginShape();
vertex(x, 0)
vertex(x, height + 20)
endShape();
}
}
First things first, you need to re-draw your shapes whenever slider changes since you are using noLoop().
To do that you can easily define an on change event like this:
sidesSlider.input(sliderChange);
And i suggest you to assign noOfSides variable's value in that function. After that call the draw funtion again.
function sliderChange() {
noOfSides = sidesSlider.value();
draw();
}
Since you would remove assigning the value to noOfSides in draw function you need to set a default value to that variable either on initialization or in `setup function.
...
noOfSides = 3;
...
Then you are almost good to go, only thing that i don't quite understand was you last part of the code. I removed that part and it works as expected at the moment.
Please be aware that you are setting background color with alpha value. That leads: on each rendering of shapes, latest shapes silhouette are still barely visible.
Here is the latest version of your code:
https://editor.p5js.org/darcane/sketches/5wpp6UgXI

algorithm to randomly & efficiently place 100 circles without any overlap?

I am trying to write a script to place 100 circles of varying sizes onto a stage. I've outlined the concise requirements below.
Given the following:
var stage; // contains a "width" and "height" property.
var circle; // the circle class. contains x, y, radius & a unique id property.
var circleArray; // contains 100 circle instances
requirements:
write a function to place 100 circles of varying radius onto the stage.
placements must be random but evenly distributed (no clumping).
placement must be performant - this will be executing on a mobile web browser.
circles must not intersect/overlap other circles.
circle.x >= 0 must be true.
circle.y >= 0 && circle.y <= stage.height must be true.
circles may have any of the following radius sizes (assigned at creation):
150
120
90
80
65
My current attempt is a brute-force method, which does not operate efficiently. If I attempt to insert any more than ~10 circles, the browser hangs. Below is my current implementation, which I am completely OK with throwing away in favor of a more performant / better one.
Here is a live demo (NOTE: there is no actual drawing code, just the logic, but it will still lock up the browser so be warned!!) http://jsbin.com/muhiziduxu/2/edit?js,console
function adjustForOverlap (circleArray) {
// a reference to the circle that is invoking this function.
var _this = this;
// remove this circle from the array we are iterating over.
var arr = circleArray.filter(function (circle){
return circle.id !== _this.id;
});
// while repeat == true, the circle may be overlapping something.
var repeat = true;
while(repeat) {
var hasOverlap = false;
for (var i=0; i<arr.length; i++) {
var other = arr[i];
var dx = _self.x - other.x;
var dy = _self.y - other.y;
var rr = _self.radius + other.radius;
if (dx * dx + dy * dy < rr * rr) {
// if here, then an overlap was detected.
hit = true;
break;
}
}
// if hit is false, the circle didn't overlap anything, so break.
if (hit === false) {
repeat = false;
break;
} else {
// an overlap was detected, so randomize position.
_self.x = Math.random() * (stage.width*2);
_self.y = Math.random() * stage.height;
}
}
}
There are lots of efficient collision detection algorithms. Many of them work by dividing up the space into cells and maintaining a separate data structure with efficient lookup of other objects in the cell. The basic steps are:
Identify a random spot for your new circle
Determine which cells it's in
Look in each of those cells for a collision
If there's a collision, goto 1.
Else, add the new circle to each of the cells it overlaps.
You can use a simple square grid (i.e. a 2-d array) for the cell data structure, or something else like a quadtree. You can also in some cases get a bit of extra speed by trying a cheap-but-coarse collision check first (do the bounding boxes overlap), and if that returns true try the slightly more expensive and exact check.
Update
For quadtrees, check out d3-quadtree, which ought to give you a pretty good implementation, with examples.
For a (very quick, untested) 2-d array implementation:
function Grid(radius, width, height) {
// I'm not sure offhand how to find the optimum grid size.
// Let's use a radius as a starting point
this.gridX = Math.ceil(width / radius);
this.gridY = Math.ceil(height / radius);
// Determine cell size
this.cellWidth = width / this.gridX;
this.cellHeight = height / this.gridY;
// Create the grid structure
this.grid = [];
for (var i = 0; i < gridY; i++) {
// grid row
this.grid[i] = [];
for (var j = 0; j < gridX; j++) {
// Grid cell, holds refs to all circles
this.grid[i][j] = [];
}
}
}
Grid.prototype = {
// Return all cells the circle intersects. Each cell is an array
getCells: function(circle) {
var cells = [];
var grid = this.grid;
// For simplicity, just intersect the bounding boxes
var gridX1Index = Math.floor(
(circle.x - circle.radius) / this.cellWidth
);
var gridX2Index = Math.ceil(
(circle.x + circle.radius) / this.cellWidth
);
var gridY1Index = Math.floor(
(circle.y - circle.radius) / this.cellHeight
);
var gridY2Index = Math.ceil(
(circle.y + circle.radius) / this.cellHeight
);
for (var i = gridY1Index; i < gridY2Index; i++) {
for (var j = gridX1Index; j < gridX2Index; j++) {
// Add cell to list
cells.push(grid[i][j]);
}
}
return cells;
},
add: function(circle) {
this.getCells(circle).forEach(function(cell) {
cell.push(circle);
});
},
hasCollisions: function(circle) {
return this.getCells(circle).some(function(cell) {
return cell.some(function(other) {
return this.collides(circle, other);
}, this);
}, this);
},
collides: function (circle, other) {
if (circle === other) {
return false;
}
var dx = circle.x - other.x;
var dy = circle.y - other.y;
var rr = circle.radius + other.radius;
return (dx * dx + dy * dy < rr * rr);
}
};
var g = new Grid(150, 1000, 800);
g.add({x: 100, y: 100, radius: 50});
g.hasCollisions({x: 100, y:80, radius: 100});
Here's a fully-functional example: http://jsbin.com/cojoxoxufu/1/edit?js,output
Note that this only shows 30 circles. It looks like the problem is often unsolvable with your current radii, width, and height. This is set up to look for up to 500 locations for each circle before giving up and accepting a collision.

Returning precise vector components in js canvas

I have been wrestling with rendering an animation that fires a projectile accurately from an "enemy" node to a "player" node in a 2D 11:11 grid (0:0 = top-left) in JS/Canvas. After a lot of reading up I've managed to get the shots close, but not quite bang on. I think my velocity function is a little out but I really don't know why. This is the trigonometric function:
this.getVelocityComponents = function(speed){
// loc (location of enemy actor) = array(2) [X_coord, Y_coord]
// des (destination (ie. player in this instance)) = array(2) [X_coord, Y_coord]
var i, sum, hyp, output = [], dis = [];
var higher = false;
for (i in loc) {
sum = 0;
if (loc[i] > des[i])
sum = loc[i] - des[i];
if (loc[i] < des[i])
sum = des[i] - loc[i];
dis.push(sum);
}
hyp = Math.sqrt(Math.pow(dis[X], 2) + Math.pow(dis[Y], 2));
if (dis[X] > dis[Y]) {
output[X] = (speed * Math.cos(dis[X]/hyp))
output[Y] = (speed * Math.sin(dis[Y]/hyp))
} else if (dis[X] < dis[Y]) {
output[X] = (speed * Math.cos(dis[Y]/hyp))
output[Y] = (speed * Math.sin(dis[X]/hyp))
}
return output;
}
and this is the instruction that tells the X and the Y of the projectile frame to advance:
var distance = [];
for (i in loc) {
var sum = 0;
if (loc[i] > des[i])
sum = loc[i] - des[i];
if (loc[i] < des[i])
sum = des[i] - loc[i];
distance.push(sum);
}
if (distance[X] > distance[Y]) {
frm[X] += (loc[X] < des[X]) ? v[X] : -v[X];
frm[Y] += (loc[Y] < des[Y]) ? v[Y] : -v[Y];
} else {
frm[Y] += (loc[Y] < des[Y]) ? v[X] : -v[X];
frm[X] += (loc[X] < des[X]) ? v[Y] : -v[Y];
}
Below is a screenshot. Blue is player, pink enemy and the yellow circles are projectiles
as you can see, it's almost on the mark.
Have I done something wrong? what do I need to do?
To calculate the direction from enemy to player you can simplify the calculations a little.
Find direction angle
var diffX = Player.x - Enemy.x, // difference in position
diffY = Player.y - Enemy.y,
angle = Math.atan2(diffY, diffX); // atan2 will give the angle in radians
Notice also difference for Y comes first for atan2 as canvas is oriented 0° pointing right.
Velocity vector
Then calculate the velocity vector using angle and speed:
// calculate velocity vector
var speed = 8,
vx = Math.cos(angle) * speed, // angle x speed
vy = Math.sin(angle) * speed;
You might want to consider using time as a factor if that is important. You can see my answer from a while back here for an example on this.
Demo
Using these calculations you will be able to always "hit" the player with the projectile (reload demo to change enemy position to random y):
var ctx = document.querySelector("canvas").getContext("2d"),
Player = {
x: 470,
y: 75
},
Enemy = {
x: 100,
y: Math.random() * 150 // reload demo to change y-position
};
// calculate angle
var diffX = Player.x - Enemy.x,
diffY = Player.y - Enemy.y,
angle = Math.atan2(diffY, diffX);
// calculate velocity vector
var speed = 8,
vx = Math.cos(angle) * speed, // angle x speed
vy = Math.sin(angle) * speed,
x = Enemy.x, // projectil start
y = Enemy.y + 50;
// render
(function loop() {
ctx.clearRect(0, 0, 500, 300);
ctx.fillRect(Player.x, Player.y, 30, 100);
ctx.fillRect(Enemy.x, Enemy.y, 30, 100);
ctx.fillRect(x - 3, y -3, 6, 6);
x += vx;
y += vy;
if (x < 500) requestAnimationFrame(loop);
})();
<canvas width=500 height=300></canvas>
The solution is much simpler than that.
What should you do ?
1) compute the vector that leads from you enemy to the player. That will be the shooting direction.
2) normalize the vector : meaning you build a vector that has a length of 1, with the same direction.
3) multiply that vector by your speed : now you have a correct speed vector, with the right norm, aimed at the player.
Below some code to help you understand :
function spawnBullet(enemy, player) {
var shootVector = [];
shootVector[0] = player[0] - enemy[0];
shootVector[1] = player[1] - enemy[1];
var shootVectorLength = Math.sqrt(Math.pow(shootVector[0], 2) + Math.pow(shootVector[1],2));
shootVector[0]/=shootVectorLength;
shootVector[1]/=shootVectorLength;
shootVector[0]*=bulletSpeed;
shootVector[1]*=bulletSpeed;
// ... here return an object that has the enemy's coordinate
// and shootVector as speed
}
Then, since you don't use time in your computations (!! wrooong !! ;-) ) you will make the bullet move with the straightforward :
bullet[0] += bullet.speed[0];
bullet[1] += bullet.speed[1];
Now the issue with fixed-step is that your game will run, say, twice slower on a 30fps device than on a 60fps device. The solution is to compute how much time elapsed since the last refresh, let's call this time 'dt'. Using that time will lead you to an update like :
bullet[0] += dt * bullet.speed[0];
bullet[1] += dt * bullet.speed[1];
and now you'll be framerate-agnostic, your game will feel the same on any device.

How to bind a timer to a progress ring with JS?

I'm playing around with a progress ring, and I can't seem to get it to run on a timer. I am trying to make the progress ring propagate automatically and take, say, 0.5 seconds to go from 0% to whatever percent I set (65% in this case).
I used this progress ring as a base: http://llinares.github.io/ring-progress-bar/
This is my fiddle: http://jsfiddle.net/gTtGW/
I tried using a timer function, but I may not have been integrating that properly. In the fiddle, I have added:
for (var i = 0; i< 65; i++){
range += i;
setTimeout(timer,800);
}
However, this breaks the progress ring. I thought that any time the range is updated (with the += i), the draw function would be called. What am I doing wrong? Thank you so much in advance.
If you're not planning to use the input[type=range] element, you can change your code to this:
(function (window) {
'use strict';
var document = window.document,
ring = document.getElementsByTagName('path')[0],
range = 0,
text = document.getElementsByTagName('text')[0],
Math = window.Math,
toRadians = Math.PI / 180,
r = 100;
function draw() {
// Update the wheel giving to it a value in degrees, getted from the percentage of the input value a.k.a. (value * 360) / 100
var degrees = range * 3.5999,
// Convert the degrees value to radians
rad = degrees * toRadians,
// Determine X and cut to 2 decimals
x = (Math.sin(rad) * r).toFixed(2),
// Determine Y and cut to 2 decimals
y = -(Math.cos(rad) * r).toFixed(2),
// The another half ring. Same as (deg > 180) ? 1 : 0
lenghty = window.Number(degrees > 180),
// Moveto + Arcto
descriptions = ['M', 0, 0, 'v', -r, 'A', r, r, 1, lenghty, 1, x, y, 'z'];
// Apply changes to the path
ring.setAttribute('d', descriptions.join(' '));
// Update the numeric display
text.textContent = range;
range++;
if(range > 100) {
clearInterval(timer);
}
}
// Translate the center axis to a half of total size
ring.setAttribute('transform', 'translate(' + r + ', ' + r + ')');
var timer = setInterval(draw,100);
}(this));
Basically changing range to a simple variable starting at 0, and increasing its value every time draw() is called. Creating an interval (named timer) to run every 0.1 seconds in this case (of course it's up to you), and clearing that interval from draw() when appropriate...
JSFiddle Demo
I think you want something like:
function inc() {
var val = parseInt(range.value, 10)
range.value = val + 1;
draw(); // updating the value doesn't cause `onchange`.
if (val < 100) { // don't go over 100
setTimeout(inc, 100);
}
}
inc();

Grass like smoothing animation on beziercurve?

This is what I am trying to achieve--GRASS Animation(Desired animation)
This is where the project is standing currently --My hair animation
This is a more structurised code of the above code --My hair animation(by markE)--markE`s code of hair animation
PROBLEM:--
I am able to give movements to hairs but animation should be more like wavy grass like freeflowing.Its not very smooth now.What can be done to make the hairs flow in more natural manner.
Please provide me with a small sample if possible!!!
<canvas id="myCanvas" width="500" height="500" style="background-color: antiquewhite" ></canvas>
JAVASCRIPT
//mouse position
var x2=0;
var y2=0;
window.addEventListener("mousemove",function(){moving(event);init()},false)
//these variables define the bend in our bezier curve
var bend9=0;
var bend8=0;
var bend7=0;
var bend6=0;
var bend5=0;
var bend4=0;
var bend3=0;
var bend2=0;
var bend1=0;
//function to get the mouse cordinates
function moving(event) {
bend_value();//this function is defined below
try
{
x2 = event.touches[0].pageX;
y2 = event.touches[0].pageY;
}
catch (error)
{
try
{
x2 = event.clientX;
y2 = event.clientY;
}
catch (e)
{
}
}
try
{
event.preventDefault();
}
catch (e)
{
}
if(between(y2,204,237) && between(x2,115,272))
{
console.log("Xmove="+x2,"Ymove="+y2)
}
}
//function for declaring range of bezier curve
function between(val, min, max)
{
return val >= min && val <= max;
}
(function() {
hair = function() {
return this;
};
hair.prototype={
draw_hair:function(a,b,c,d,e,f,g,h){
var sx =136+a;//start position of curve.used in moveTo(sx,sy)
var sy =235+b;
var cp1x=136+c;//control point 1
var cp1y=222+d;
var cp2x=136+e;//control point 2
var cp2y=222+f;
var endx=136+g;//end points
var endy=210+h;
var canvas = document.getElementById('myCanvas');
var context = canvas.getContext('2d');
// context.clearRect(0, 0,500,500);
context.strokeStyle="grey";
context.lineWidth="8";
context.beginPath();
context.moveTo(sx,sy);
context.bezierCurveTo(cp1x,cp1y,cp2x,cp2y,endx,endy);
context.lineCap = 'round';
context.stroke();
// context.restore();
// context.save();
}
};
})();
//this function provides and calculate the bend on mousemove
function bend_value(){
var ref1=135;//this is ref point for hair or curve no 1
var ref2=150;//hair no 2 and so on
var ref3=165;
var ref4=180;
var ref5=195;
var ref6=210;
var ref7=225;
var ref8=240;
var ref9=255;
if(between(x2,115,270) && between(y2,205,236))
{
if(x2>=135 && x2<=145){bend1=(x2-ref1)*(2.2);}
if(x2<=135 && x2>=125){bend1=(x2-ref1)*(2.2);}
if(x2>=150 && x2<=160){bend2=(x2-ref2)*(2.2);}
if(x2<=150 && x2>=140){bend2=(x2-ref2)*(2.2);}
if(x2>=165 && x2<=175){bend3=(x2-ref3)*(2.2);}
if(x2<=165 && x2>=155){bend3=(x2-ref3)*(2.2);}
if(x2>=180 && x2<=190){bend4=(x2-ref4)*(2.2);}
if(x2<=180 && x2>=170){bend4=(x2-ref4)*(2.2);}
if(x2>=195 && x2<=205){bend5=(x2-ref5)*(2.2);}
if(x2<=195 && x2>=185){bend5=(x2-ref5)*(2.2);}
if(x2>=210 && x2<=220){bend6=(x2-ref6)*(2.2);}
if(x2<=210 && x2>=200){bend6=(x2-ref6)*(2.2);}
if(x2>=225 && x2<=235){bend7=(x2-ref7)*(2.2);}
if(x2<=225 && x2>=215){bend7=(x2-ref7)*(2.2);}
if(x2>=240 && x2<=250){bend8=(x2-ref8)*(2.2);}
if(x2<=240 && x2>=230){bend8=(x2-ref8)*(2.2);}
if(x2>=255 && x2<=265){bend9=(x2-ref9)*(2.2);}
if(x2<=255 && x2>=245){bend9=(x2-ref9)*(2.2);}
}
}
function init(){//this function draws each hair/curve
var canvas = document.getElementById('myCanvas');
var context = canvas.getContext('2d');
var clear=context.clearRect(0, 0,500,500);
var save=context.save();
// /* console.log("bend2="+bend2)
// console.log("bend3="+bend3)
// console.log("bend4="+bend4)
// console.log("bend5="+bend5)
// console.log("bend6="+bend6)
// console.log("bend7="+bend7)
// console.log("bend8="+bend8)
// console.log("bend9="+bend9)*/
hd1 = new hair();//hd1 stands for hair draw 1.this is an instance created for drawing hair no 1
clear;
hd1.draw_hair(0,0,0,0,0,0,0+bend1/2,0);//these parameters passed to function drawhair and bend is beint retrieved from function bend_value()
save;
hd2 = new hair();
clear;
hd2.draw_hair(15,0,15,0,15,0,15+bend2/2,0);
save;
hd3 = new hair();
clear;
hd3.draw_hair(30,0,30,0,30,0,30+bend3/2,0);
save;
hd4 = new hair();
clear;
hd4.draw_hair(45,0,45,0,45,0,45+bend4/2,0);
save;
hd5 = new hair();
clear;
hd5.draw_hair(60,0,60,0,60,0,60+bend5/2,0);
save;
}
window.onload = function() {
init();
disableSelection(document.body)
}
function disableSelection(target){
if (typeof target.onselectstart!="undefined") //IE
target.onselectstart=function(){return false}
else if (typeof target.style.MozUserSelect!="undefined") //Firefox
target.style.MozUserSelect="none"
else //All other ie: Opera
target.onmousedown=function(){return false}
target.style.cursor = "default"
}
Update: I'm currently adjusting the code to produce the requested result and commenting it.
(function() { // The code is encapsulated in a self invoking function to isolate the scope
"use strict";
// The following lines creates shortcuts to the constructors of the Box2D types used
var B2Vec2 = Box2D.Common.Math.b2Vec2,
B2BodyDef = Box2D.Dynamics.b2BodyDef,
B2Body = Box2D.Dynamics.b2Body,
B2FixtureDef = Box2D.Dynamics.b2FixtureDef,
B2Fixture = Box2D.Dynamics.b2Fixture,
B2World = Box2D.Dynamics.b2World,
B2PolygonShape = Box2D.Collision.Shapes.b2PolygonShape,
B2RevoluteJoint = Box2D.Dynamics.Joints.b2RevoluteJoint,
B2RevoluteJointDef = Box2D.Dynamics.Joints.b2RevoluteJointDef;
// This makes sure that there is a method to request a callback to update the graphics for next frame
window.requestAnimationFrame =
window.requestAnimationFrame || // According to the standard
window.mozRequestAnimationFrame || // For mozilla
window.webkitRequestAnimationFrame || // For webkit
window.msRequestAnimationFrame || // For ie
function (f) { window.setTimeout(function () { f(Date.now()); }, 1000/60); }; // If everthing else fails
var world = new B2World(new B2Vec2(0, -10), true), // Create a world with gravity
physicalObjects = [], // Maintain a list of the simulated objects
windInput = 0, // The input for the wind in the current frame
wind = 0, // The current wind (smoothing the input values + randomness)
STRAW_COUNT = 10, // Number of straws
GRASS_RESET_SPEED = 2, // How quick should the straw reset to its target angle
POWER_MOUSE_WIND = 120, // How much does the mouse affect the wind
POWER_RANDOM_WIND = 180; // How much does the randomness affect the wind
// GrassPart is a prototype for a piece of a straw. It has the following properties
// position: the position of the piece
// density: the density of the piece
// target: the target angle of the piece
// statik: a boolean stating if the piece is static (i.e. does not move)
function GrassPart(position, density, target, statik) {
this.width = 0.05;
this.height = 0.5;
this.target = target;
// To create a physical body in Box2D you have to setup a body definition
// and create at least one fixture.
var bdef = new B2BodyDef(), fdef = new B2FixtureDef();
// In this example we specify if the body is static or not (the grass roots
// has to be static to keep the straw in its position), and its original
// position.
bdef.type = statik? B2Body.b2_staticBody : B2Body.b2_dynamicBody;
bdef.position.SetV(position);
// The fixture of the piece is a box with a given density. The negative group index
// makes sure that the straws does not collide.
fdef.shape = new B2PolygonShape();
fdef.shape.SetAsBox(this.width/2, this.height/2);
fdef.density = density;
fdef.filter.groupIndex = -1;
// The body and fixture is created and added to the world
this.body = world.CreateBody(bdef);
this.body.CreateFixture(fdef);
}
// This method is called for every frame of animation. It strives to reset the original
// angle of the straw (the joint). The time parameter is unused here but contains the
// current time.
GrassPart.prototype.update = function (time) {
if (this.joint) {
this.joint.SetMotorSpeed(GRASS_RESET_SPEED*(this.target - this.joint.GetJointAngle()));
}
};
// The link method is used to link the pieces of the straw together using a joint
// other: the piece to link to
// torque: the strength of the joint (stiffness)
GrassPart.prototype.link = function(other, torque) {
// This is all Box2D specific. Look it up in the manual.
var jdef = new B2RevoluteJointDef();
var p = this.body.GetWorldPoint(new B2Vec2(0, 0.5)); // Get the world coordinates of where the joint
jdef.Initialize(this.body, other.body, p);
jdef.maxMotorTorque = torque;
jdef.motorSpeed = 0;
jdef.enableMotor = true;
// Add the joint to the world
this.joint = world.CreateJoint(jdef);
};
// A prototype for a straw of grass
// position: the position of the bottom of the root of the straw
function Grass(position) {
var pos = new B2Vec2(position.x, position.y);
var angle = 1.2*Math.random() - 0.6; // Randomize the target angle
// Create three pieces, the static root and to more, and place them in line.
// The second parameter is the stiffness of the joints. It controls how the straw bends.
// The third is the target angle and different angles are specified for the pieces.
this.g1 = new GrassPart(pos, 1, angle/4, true); // This is the static root
pos.Add(new B2Vec2(0, 1));
this.g2 = new GrassPart(pos, 0.75, angle);
pos.Add(new B2Vec2(0, 1));
this.g3 = new GrassPart(pos, 0.5);
// Link the pieces into a straw
this.g1.link(this.g2, 20);
this.g2.link(this.g3, 3);
// Add the pieces to the list of simulate objects
physicalObjects.push(this.g1);
physicalObjects.push(this.g2);
physicalObjects.push(this.g3);
}
Grass.prototype.draw = function (context) {
var p = new B2Vec2(0, 0.5);
var p1 = this.g1.body.GetWorldPoint(p);
var p2 = this.g2.body.GetWorldPoint(p);
var p3 = this.g3.body.GetWorldPoint(p);
context.strokeStyle = 'grey';
context.lineWidth = 0.4;
context.lineCap = 'round';
context.beginPath();
context.moveTo(p1.x, p1.y);
context.quadraticCurveTo(p2.x, p2.y, p3.x, p3.y);
context.stroke();
};
var lastX, grass = [], context = document.getElementById('canvas').getContext('2d');
function updateGraphics(time) {
window.requestAnimationFrame(updateGraphics);
wind = 0.95*wind + 0.05*(POWER_MOUSE_WIND*windInput + POWER_RANDOM_WIND*Math.random() - POWER_RANDOM_WIND/2);
windInput = 0;
world.SetGravity(new B2Vec2(wind, -10));
physicalObjects.forEach(function(obj) { if (obj.update) obj.update(time); });
world.Step(1/60, 8, 3);
world.ClearForces();
context.clearRect(0, 0, context.canvas.width, context.canvas.height);
context.save();
context.translate(context.canvas.width/2, context.canvas.height/2);
context.scale(context.canvas.width/20, -context.canvas.width/20);
grass.forEach(function (o) { o.draw(context); });
context.restore();
}
document.getElementsByTagName('body')[0].addEventListener("mousemove", function (e) {
windInput = Math.abs(lastX - e.x) < 200? 0.2*(e.x - lastX) : 0;
lastX = e.x;
});
var W = 8;
for (var i = 0; i < STRAW_COUNT; i++) {
grass.push(new Grass(new B2Vec2(W*(i/(STRAW_COUNT-1))-W/2, -1)));
}
window.requestAnimationFrame(updateGraphics);
})();
Waving grass algorithm
UPDATE
I made a reduced update to better meet what I believe is your requirements. To use mouse you just calculate the angle between the mouse point and the strain root and use that for new angle in the update.
I have incorporated a simple mouse-move sensitive approach which makes the strains "point" towards the mouse, but you can add random angles to this as deltas and so forth. Everything you need is as said in the code - adjust as needed.
New fiddle (based on previous with a few modifications):
http://jsfiddle.net/AbdiasSoftware/yEwGc/
Image showing 150 strains being simulated.
Grass simulation demo:
http://jsfiddle.net/AbdiasSoftware/5z89V/
This will generate a nice realistic looking grass field. The demo has 70 grass rendered (works best in Chrome or just lower the number for Firefox).
The code is rather simple. It consists of a main object (grassObj) which contains its geometry as well as functions to calculate the angles, segments, movements and so forth. I'll show this in detail below.
First some inits that are accessed globally by the functions:
var numOfGrass = 70, /// number of grass strains
grass,
/// get canvas context
ctx = canvas.getContext('2d'),
w = canvas.width,
h = canvas.height,
/// we use an animated image for the background
/// The image also clears the canvas for each loop call
/// I rendered the clouds in a 3D software.
img = document.createElement('img'),
ix = 0, /// background image position
iw = -1; /// used for with and initial for flag
/// load background image, use it whenever it's ready
img.onload = function() {iw = this.width}
img.src = 'http://i.imgur.com/zzjtzG7.jpg';
The heart - grassObj
The main object as mentioned above is the grassObj:
function grassObj(x, y, seg1, seg2, maxAngle) {
/// exposed properties we need for rendering
this.x = x; /// bottom position of grass
this.y = y;
this.seg1 = seg1; /// segments of grass
this.seg2 = seg2;
this.gradient = getGradient(Math.random() * 50 + 50, 100 * Math.random() + 170);
this.currentAngle; ///current angle that will be rendered
/// internals used for calculating new angle, goal, difference and speed
var counter, /// counter between 0-1 for ease-in/out
delta, /// random steps in the direction goal rel. c.angle.
angle, /// current angle, does not change until goal is reached
diff, /// diff between goal and angle
goal = getAngle();
/// internal: returns an angel between 0 and maxAngle
function getAngle() {
return maxAngle * Math.random();
}
/// ease in-out function
function easeInOut(t) {
return t < 0.5 ? 4 * t * t * t : (t-1) * (2 * t - 2) * (2 * t - 2) + 1;
}
/// sets a new goal for grass to move to. Does the main calculations
function newGoal() {
angle = goal; /// set goal as new angle when reached
this.currentAngle = angle;
goal = getAngle(); /// get new goal
diff = goal - angle; /// calc diff
counter = 0; /// reset counter
delta = (4 * Math.random() + 1) / 100;
}
/// creates a gradient for this grass to increase realism
function getGradient(min, max) {
var g = ctx.createLinearGradient(0, 0, 0, h);
g.addColorStop(1, 'rgb(0,' + parseInt(min) + ', 0)');
g.addColorStop(0, 'rgb(0,' + parseInt(max) + ', 0)');
return g;
}
/// this is called from animation loop. Counts and keeps tracks of
/// current position and calls new goal when current goal is reached
this.update = function() {
/// count from 0 to 1 with random delta value
counter += delta;
/// if counter passes 1 then goal is reached -> get new goal
if (counter > 1) {
newGoal();
return;
}
/// ease in/out function
var t = easeInOut(counter);
/// update current angle for render
this.currentAngle = angle + t * diff;
}
/// init
newGoal();
return this;
}
Grass generator
We call makeGrass to generate grass at random positions, random heights and with random segments. The function is called with number of grass to render, width and height of canvas to fill and a variation variable in percent (0 - 1 float).
The single grass consist only of four points in total. The two middle points are spread about 1/3 and 2/3 of the total height with a little variation to break pattern. The points when rendered, are smoother using a cardinal spline with full tension to make the grass look smooth.
function makeGrass(numOfGrass, width, height, hVariation) {
/// setup variables
var x, y, seg1, seg2, angle,
hf = height * hVariation, /// get variation
i = 0,
grass = []; /// array to hold the grass
/// generate grass
for(; i < numOfGrass; i++) {
x = width * Math.random(); /// random x position
y = height - hf * Math.random(); /// random height
/// break grass into 3 segments with random variation
seg1 = y / 3 + y * hVariation * Math.random() * 0.1;
seg2 = (y / 3 * 2) + y * hVariation * Math.random() * 0.1;
grass.push(new grassObj(x, y, seg1, seg2, 15 * Math.random() + 50));
}
return grass;
}
Render
The render function just loops through the objects and updates the current geometry:
function renderGrass(ctx, grass) {
/// local vars for animation
var len = grass.length,
i = 0,
gr, pos, diff, pts, x, y;
/// renders background when loaded
if (iw > -1) {
ctx.drawImage(img, ix--, 0);
if (ix < -w) {
ctx.drawImage(img, ix + iw, 0);
}
if (ix <= -iw) ix = 0;
} else {
ctx.clearRect(0, 0, w, h);
}
/// loops through the grass object and renders current state
for(; gr = grass[i]; i++) {
x = gr.x;
y = gr.y;
ctx.beginPath();
/// calculates the end-point based on length and angle
/// Angle is limited [0, 60] which we add 225 deg. to get
/// it upwards. Alter 225 to make grass lean more to a side.
pos = lineToAngle(ctx, x, h, y, gr.currentAngle + 225);
/// diff between end point and root point
diff = (pos[0] - x)
pts = [];
/// starts at bottom, goes to top middle and then back
/// down with a slight offset to make the grass
pts.push(x); /// first couple at bottom
pts.push(h);
/// first segment 1/4 of the difference
pts.push(x + (diff / 4));
pts.push(h - gr.seg1);
/// second segment 2/3 of the difference
pts.push(x + (diff / 3 * 2));
pts.push(h - gr.seg2);
pts.push(pos[0]); /// top point
pts.push(pos[1]);
/// re-use previous data, but go backward down to root again
/// with a slight offset
pts.push(x + (diff / 3 * 2) + 10);
pts.push(h - gr.seg2);
pts.push(x + (diff / 4) + 12);
pts.push(h - gr.seg1 + 10);
pts.push(x + 15); /// end couple at bottom
pts.push(h);
/// smooth points (extended context function, see demo)
ctx.curve(pts, 0.8, 5);
ctx.closePath();
/// fill grass with its gradient
ctx.fillStyle = gr.gradient;
ctx.fill();
}
}
Animate
The main loop where we animate everything:
function animate() {
/// update each grass objects
for(var i = 0;i < grass.length; i++) grass[i].update();
/// render them
renderGrass(ctx, grass);
/// loop
requestAnimationFrame(animate);
}
And that's all there is to it for this version.
Darn! Late to the party...
But LOTS of neat answers here -- I'm upvoting all !
Anyway, here's my idea:
Here's code and a Fiddle: http://jsfiddle.net/m1erickson/MJjHz/
<!doctype html>
<html>
<head>
<link rel="stylesheet" type="text/css" media="all" href="css/reset.css" /> <!-- reset css -->
<script src="http://code.jquery.com/jquery-1.9.1.js"></script>
<script src="http://code.jquery.com/ui/1.10.1/jquery-ui.js"></script>
<style>
body { font-family: arial; padding:15px; }
canvas { border: 1px solid red;}
input[type="text"]{width:35px;}
</style>
</head>
<body>
<p>Move mouse across hairs</p>
<canvas height="100" width="250" id="canvas"></canvas>
<script>
$(function() {
var canvas=document.getElementById("canvas");
var ctx = canvas.getContext("2d");
var canvasOffset=$("#canvas").offset();
var offsetX=canvasOffset.left;
var offsetY=canvasOffset.top;
var cHeight=canvas.height;
var showControls=false;
var lastMouseX=0;
// preset styling CONSTANTS
var SWAY=.55; // max endpoint sway from center
var C1Y=.40; // fixed Y of cp#1
var C2SWAY=.20 // max cp#2 sway from center
var C2Y=.75; // fixed Y of cp#2
var YY=20; // max height of ellipse at top of hair
var PIPERCENT=Math.PI/100;
var hairs=[];
// create hairs
var newHairX=40;
var hairCount=20;
for(var i=0;i<hairCount;i++){
var randomLength=50+parseInt(Math.random()*5);
addHair(newHairX+(i*8),randomLength);
}
function addHair(x,length){
hairs.push({
x:x,
length:length,
left:0,
right:0,
top:0,
s:{x:0,y:0},
c1:{x:0,y:0},
c2:{x:0,y:0},
e:{x:0,y:0},
isInMotion:false,
currentX:0
});
}
for(var i=0;i<hairs.length;i++){
var h=hairs[i];
setHairPointsFixed(h);
setHairPointsPct(h,50);
draw(h);
}
function setHairPointsFixed(h){
h.s.x = h.x;
h.s.y = cHeight;
h.c1.x = h.x;
h.c1.y = cHeight-h.length*C1Y;
h.c2.y = cHeight-h.length*C2Y;
h.top = cHeight-h.length;
h.left = h.x-h.length*SWAY;
h.right = h.x+h.length*SWAY;
}
function setHairPointsPct(h,pct){
// endpoint
var a=Math.PI+PIPERCENT*pct;
h.e.x = h.x - ((h.length*SWAY)*Math.cos(a));
h.e.y = h.top + (YY*Math.sin(a));
// controlpoint#2
h.c2.x = h.x + h.length*(C2SWAY*2*pct/100-C2SWAY);
}
//////////////////////////////
function handleMouseMove(e){
mouseX=parseInt(e.clientX-offsetX);
mouseY=parseInt(e.clientY-offsetY);
// draw this frame based on mouse moves
ctx.clearRect(0,0,canvas.width,canvas.height);
for(var i=0;i<hairs.length;i++){
hairMoves(hairs[i],mouseX,mouseY);
}
lastMouseX=mouseX;
}
$("#canvas").mousemove(function(e){handleMouseMove(e);});
function hairMoves(h,mouseX,mouseY){
// No hair movement if not touching hair
if(mouseY<cHeight-h.length-YY){
if(h.isInMotion){
h.isInMotion=false;
setHairPointsPct(h,50);
}
draw(h);
return;
}
// No hair movement if too deep in hair
if(mouseY>h.c1.y){
draw(h);
return;
}
//
var pct=50;
if(mouseX>=h.left && mouseX<=h.right){
if(h.isInMotion){
var pct=-(mouseX-h.right)/(h.right-h.left)*100;
setHairPointsPct(h,pct);
draw(h);
}else{
// if hair is at rest
// but mouse has just contacted hair
// set hair in motion
if( (lastMouseX<=h.x && mouseX>=h.x )
||(lastMouseX>=h.x && mouseX<=h.x )
){
h.isInMotion=true;
var pct=-(mouseX-h.right)/(h.right-h.left)*100;
}
setHairPointsPct(h,pct);
draw(h);
}
}else{
if(h.isInMotion){
h.isInMotion=false;
setHairPointsPct(h,50);
};
draw(h);
}
}
function dot(pt,color){
ctx.beginPath();
ctx.arc(pt.x,pt.y,5,0,Math.PI*2,false);
ctx.closePath();
ctx.fillStyle=color;
ctx.fill();
}
function draw(h){
ctx.beginPath();
ctx.moveTo(h.s.x,h.s.y);
ctx.bezierCurveTo(h.c1.x,h.c1.y,h.c2.x,h.c2.y,h.e.x,h.e.y);
ctx.strokeStyle="orange";
ctx.lineWidth=3;
ctx.stroke();
if(showControls){
dot(h.s,"green");
dot(h.c1,"red");
dot(h.c2,"blue");
dot(h.e,"purple");
ctx.beginPath();
ctx.rect(h.left,h.top-YY,(h.right-h.left),h.length*(1-C1Y)+YY)
ctx.lineWidth=1;
ctx.strokeStyle="lightgray";
ctx.stroke();
}
}
});
</script>
</body>
</html>
Here is a simple hair simulation that seems to be what you are looking for. The basic idea is to draw a bezier curve (in this case I use two curves to provide thickness for the hair). The curve will have a base, a bending point, and a tip. I set the bending point halfway up the hair. The tip of the hair will rotate about the axis of the base of the hair in response to mouse movement.
Place this code in a script tag below the canvas element declaration.
function Point(x, y) {
this.x = x;
this.y = y;
}
function Hair( ) {
this.height = 100; // hair height
this.baseWidth = 3; // hair base width.
this.thickness = 1.5; // hair thickness
this.points = {};
this.points.base1 = new Point(Math.random()*canvas.width, canvas.height);
// The point at which the hair will bend. I set it to the middle of the hair, but you can adjust this.
this.points.bendPoint1 = new Point(this.points.base1.x-this.thickness, this.points.base1.y - this.height / 2)
this.points.bendPoint2 = new Point(this.points.bendPoint1.x, this.points.bendPoint1.y-this.thickness); // complement of bendPoint1 - we use this because the hair has thickness
this.points.base2 = new Point(this.points.base1.x + this.baseWidth, this.points.base1.y) // complement of base1 - we use this because the hair has thickness
}
Hair.prototype.paint = function(mouseX, mouseY, direction) {
ctx.save();
// rotate the the tip of the hair
var tipRotationAngle = Math.atan(Math.abs(this.points.base1.y - mouseY)/Math.abs(this.points.base1.x - mouseX));
// if the mouse is on the other side of the hair, adjust the angle
if (mouseX < this.points.base1.x) {
tipRotationAngle = Math.PI - tipRotationAngle;
}
// if the mouse isn't close enough to the hair, it shouldn't affect the hair
if (mouseX < this.points.base1.x - this.height/2 || mouseX > this.points.base1.x + this.height/2 || mouseY < this.points.base1.y - this.height || mouseY > this.points.base1.y) {
tipRotationAngle = Math.PI/2; // 90 degrees, which means the hair is straight
}
// Use the direction of the mouse to as a lazy way to simulate the direction the hair should bend.
// Note that in real life, the direction that the hair should bend has nothing to do with the direction of motion. It actually depends on which side of the hair the force is being applied.
// Figuring out which side of the hair the force is being applied is a little tricky, so I took this shortcut.
// If you run your finger along a comb quickly, this approximation will work. However if you are in the middle of the comb and slowly change direction, you will notice that the force is still applied in the opposite direction of motion as you slowly back off the set of tines.
if ((mouseX < this.points.base1.x && direction == 'right') || (mouseX > this.points.base1.x && direction == 'left')) {
tipRotationAngle = Math.PI/2; // 90 degrees, which means the hair is straight
}
var tipPoint = new Point(this.points.base1.x + this.baseWidth + this.height*Math.cos(tipRotationAngle), this.points.base1.y - this.height*Math.sin(tipRotationAngle));
ctx.beginPath();
ctx.moveTo(this.points.base1.x, this.points.base1.y); // start at the base
ctx.bezierCurveTo(this.points.base1.x, this.points.base1.y, this.points.bendPoint1.x, this.points.bendPoint1.y, tipPoint.x, tipPoint.y); // draw a curve to the tip of the hair
ctx.bezierCurveTo(tipPoint.x, tipPoint.y, this.points.bendPoint2.x, this.points.bendPoint2.y, this.points.base2.x, this.points.base2.y); // draw a curve back down to the base using the complement points since the hair has thickness.
ctx.closePath(); // complete the path so we have a shape that we can fill with color
ctx.fillStyle='rgb(0,0,0)';
ctx.fill();
ctx.restore();
}
// I used global variables to keep the example simple, but it is generally best to avoid using global variables
window.canvas = document.getElementById('myCanvas');
window.ctx = canvas.getContext('2d');
ctx.fillStyle = 'rgb(200,255,255)'; // background color
window.hair = [];
window.prevClientX = 0;
for (var i = 0; i < 100; i++) {
hair.push(new Hair());
}
// initial draw
ctx.fillRect(0,0,canvas.width,canvas.height); // clear canvas
for (var i = 0; i < hair.length; i++) {
hair[i].paint(0, 0, 'right');
}
window.onmousemove = function(e) {
ctx.fillRect(0,0,canvas.width,canvas.height); // clear canvas
for (var i = 0; i < hair.length; i++) {
hair[i].paint(e.clientX, e.clientY, e.clientX > window.prevClientX ? 'right' : 'left');
}
window.prevClientX = e.clientX;
}
Made this some time ago, might be useful to some people. Just adjust the variables at the beginning of the code with the values that fits your wishes:
...
Mheight = 1;
height = 33;
width = 17;
distance = 10;
randomness = 14;
angle = Math.PI / 2;
...
Also on http://lucasm0ta.github.io/JsGrass/

Categories