Related
How do I convert a string to an integer in JavaScript?
The simplest way would be to use the native Number function:
var x = Number("1000")
If that doesn't work for you, then there are the parseInt, unary plus, parseFloat with floor, and Math.round methods.
parseInt()
var x = parseInt("1000", 10); // You want to use radix 10
// So you get a decimal number even with a leading 0 and an old browser ([IE8, Firefox 20, Chrome 22 and older][1])
Unary plus
If your string is already in the form of an integer:
var x = +"1000";
floor()
If your string is or might be a float and you want an integer:
var x = Math.floor("1000.01"); // floor() automatically converts string to number
Or, if you're going to be using Math.floor several times:
var floor = Math.floor;
var x = floor("1000.01");
parseFloat()
If you're the type who forgets to put the radix in when you call parseInt, you can use parseFloat and round it however you like. Here I use floor.
var floor = Math.floor;
var x = floor(parseFloat("1000.01"));
round()
Interestingly, Math.round (like Math.floor) will do a string to number conversion, so if you want the number rounded (or if you have an integer in the string), this is a great way, maybe my favorite:
var round = Math.round;
var x = round("1000"); // Equivalent to round("1000", 0)
Try parseInt function:
var number = parseInt("10");
But there is a problem. If you try to convert "010" using parseInt function, it detects as octal number, and will return number 8. So, you need to specify a radix (from 2 to 36). In this case base 10.
parseInt(string, radix)
Example:
var result = parseInt("010", 10) == 10; // Returns true
var result = parseInt("010") == 10; // Returns false
Note that parseInt ignores bad data after parsing anything valid.
This guid will parse as 51:
var result = parseInt('51e3daf6-b521-446a-9f5b-a1bb4d8bac36', 10) == 51; // Returns true
There are two main ways to convert a string to a number in JavaScript. One way is to parse it and the other way is to change its type to a Number. All of the tricks in the other answers (e.g., unary plus) involve implicitly coercing the type of the string to a number. You can also do the same thing explicitly with the Number function.
Parsing
var parsed = parseInt("97", 10);
parseInt and parseFloat are the two functions used for parsing strings to numbers. Parsing will stop silently if it hits a character it doesn't recognise, which can be useful for parsing strings like "92px", but it's also somewhat dangerous, since it won't give you any kind of error on bad input, instead you'll get back NaN unless the string starts with a number. Whitespace at the beginning of the string is ignored. Here's an example of it doing something different to what you want, and giving no indication that anything went wrong:
var widgetsSold = parseInt("97,800", 10); // widgetsSold is now 97
It's good practice to always specify the radix as the second argument. In older browsers, if the string started with a 0, it would be interpreted as octal if the radix wasn't specified which took a lot of people by surprise. The behaviour for hexadecimal is triggered by having the string start with 0x if no radix is specified, e.g., 0xff. The standard actually changed with ECMAScript 5, so modern browsers no longer trigger octal when there's a leading 0 if no radix has been specified. parseInt understands radixes up to base 36, in which case both upper and lower case letters are treated as equivalent.
Changing the Type of a String to a Number
All of the other tricks mentioned above that don't use parseInt, involve implicitly coercing the string into a number. I prefer to do this explicitly,
var cast = Number("97");
This has different behavior to the parse methods (although it still ignores whitespace). It's more strict: if it doesn't understand the whole of the string than it returns NaN, so you can't use it for strings like 97px. Since you want a primitive number rather than a Number wrapper object, make sure you don't put new in front of the Number function.
Obviously, converting to a Number gives you a value that might be a float rather than an integer, so if you want an integer, you need to modify it. There are a few ways of doing this:
var rounded = Math.floor(Number("97.654")); // other options are Math.ceil, Math.round
var fixed = Number("97.654").toFixed(0); // rounded rather than truncated
var bitwised = Number("97.654")|0; // do not use for large numbers
Any bitwise operator (here I've done a bitwise or, but you could also do double negation as in an earlier answer or a bit shift) will convert the value to a 32 bit integer, and most of them will convert to a signed integer. Note that this will not do want you want for large integers. If the integer cannot be represented in 32 bits, it will wrap.
~~"3000000000.654" === -1294967296
// This is the same as
Number("3000000000.654")|0
"3000000000.654" >>> 0 === 3000000000 // unsigned right shift gives you an extra bit
"300000000000.654" >>> 0 === 3647256576 // but still fails with larger numbers
To work correctly with larger numbers, you should use the rounding methods
Math.floor("3000000000.654") === 3000000000
// This is the same as
Math.floor(Number("3000000000.654"))
Bear in mind that coercion understands exponential notation and Infinity, so 2e2 is 200 rather than NaN, while the parse methods don't.
Custom
It's unlikely that either of these methods do exactly what you want. For example, usually I would want an error thrown if parsing fails, and I don't need support for Infinity, exponentials or leading whitespace. Depending on your use case, sometimes it makes sense to write a custom conversion function.
Always check that the output of Number or one of the parse methods is the sort of number you expect. You will almost certainly want to use isNaN to make sure the number is not NaN (usually the only way you find out that the parse failed).
ParseInt() and + are different
parseInt("10.3456") // returns 10
+"10.3456" // returns 10.3456
Fastest
var x = "1000"*1;
Test
Here is little comparison of speed (macOS only)... :)
For Chrome, 'plus' and 'mul' are fastest (>700,000,00 op/sec), 'Math.floor' is slowest. For Firefox, 'plus' is slowest (!) 'mul' is fastest (>900,000,000 op/sec). In Safari 'parseInt' is fastest, 'number' is slowest (but results are quite similar, >13,000,000 <31,000,000). So Safari for cast string to int is more than 10x slower than other browsers. So the winner is 'mul' :)
You can run it on your browser by this link
https://jsperf.com/js-cast-str-to-number/1
I also tested var x = ~~"1000";. On Chrome and Safari, it is a little bit slower than var x = "1000"*1 (<1%), and on Firefox it is a little bit faster (<1%).
I use this way of converting string to number:
var str = "25"; // String
var number = str*1; // Number
So, when multiplying by 1, the value does not change, but JavaScript automatically returns a number.
But as it is shown below, this should be used if you are sure that the str is a number (or can be represented as a number), otherwise it will return NaN - not a number.
You can create simple function to use, e.g.,
function toNumber(str) {
return str*1;
}
Try parseInt.
var number = parseInt("10", 10); //number will have value of 10.
I love this trick:
~~"2.123"; //2
~~"5"; //5
The double bitwise negative drops off anything after the decimal point AND converts it to a number format. I've been told it's slightly faster than calling functions and whatnot, but I'm not entirely convinced.
Another method I just saw here (a question about the JavaScript >>> operator, which is a zero-fill right shift) which shows that shifting a number by 0 with this operator converts the number to a uint32 which is nice if you also want it unsigned. Again, this converts to an unsigned integer, which can lead to strange behaviors if you use a signed number.
"-2.123" >>> 0; // 4294967294
"2.123" >>> 0; // 2
"-5" >>> 0; // 4294967291
"5" >>> 0; // 5
In JavaScript, you can do the following:
ParseInt
parseInt("10.5") // Returns 10
Multiplying with 1
var s = "10";
s = s*1; // Returns 10
Using the unary operator (+)
var s = "10";
s = +s; // Returns 10
Using a bitwise operator
(Note: It starts to break after 2140000000. Example: ~~"2150000000" = -2144967296)
var s = "10.5";
s = ~~s; // Returns 10
Using Math.floor() or Math.ceil()
var s = "10";
s = Math.floor(s) || Math.ceil(s); // Returns 10
Please see the below example. It will help answer your question.
Example Result
parseInt("4") 4
parseInt("5aaa") 5
parseInt("4.33333") 4
parseInt("aaa"); NaN (means "Not a Number")
By using parseint function, it will only give op of integer present and not the string.
Beware if you use parseInt to convert a float in scientific notation!
For example:
parseInt("5.6e-14")
will result in
5
instead of
0
Also as a side note: MooTools has the function toInt() which is used on any native string (or float (or integer)).
"2".toInt() // 2
"2px".toInt() // 2
2.toInt() // 2
We can use +(stringOfNumber) instead of using parseInt(stringOfNumber).
Example: +("21") returns int of 21, like the parseInt("21").
We can use this unary "+" operator for parsing float too...
To convert a String into Integer, I recommend using parseFloat and not parseInt. Here's why:
Using parseFloat:
parseFloat('2.34cms') //Output: 2.34
parseFloat('12.5') //Output: 12.5
parseFloat('012.3') //Output: 12.3
Using parseInt:
parseInt('2.34cms') //Output: 2
parseInt('12.5') //Output: 12
parseInt('012.3') //Output: 12
So if you have noticed parseInt discards the values after the decimals, whereas parseFloat lets you work with floating point numbers and hence more suitable if you want to retain the values after decimals. Use parseInt if and only if you are sure that you want the integer value.
There are many ways in JavaScript to convert a string to a number value... All are simple and handy. Choose the way which one works for you:
var num = Number("999.5"); //999.5
var num = parseInt("999.5", 10); //999
var num = parseFloat("999.5"); //999.5
var num = +"999.5"; //999.5
Also, any Math operation converts them to number, for example...
var num = "999.5" / 1; //999.5
var num = "999.5" * 1; //999.5
var num = "999.5" - 1 + 1; //999.5
var num = "999.5" - 0; //999.5
var num = Math.floor("999.5"); //999
var num = ~~"999.5"; //999
My prefer way is using + sign, which is the elegant way to convert a string to number in JavaScript.
Try str - 0 to convert string to number.
> str = '0'
> str - 0
0
> str = '123'
> str - 0
123
> str = '-12'
> str - 0
-12
> str = 'asdf'
> str - 0
NaN
> str = '12.34'
> str - 0
12.34
Here are two links to compare the performance of several ways to convert string to int
https://jsperf.com/number-vs-parseint-vs-plus
http://phrogz.net/js/string_to_number.html
Here is the easiest solution
let myNumber = "123" | 0;
More easy solution
let myNumber = +"123";
In my opinion, no answer covers all edge cases as parsing a float should result in an error.
function parseInteger(value) {
if(value === '') return NaN;
const number = Number(value);
return Number.isInteger(number) ? number : NaN;
}
parseInteger("4") // 4
parseInteger("5aaa") // NaN
parseInteger("4.33333") // NaN
parseInteger("aaa"); // NaN
The easiest way would be to use + like this
const strTen = "10"
const numTen = +strTen // string to number conversion
console.log(typeof strTen) // string
console.log(typeof numTen) // number
I actually needed to "save" a string as an integer, for a binding between C and JavaScript, so I convert the string into an integer value:
/*
Examples:
int2str( str2int("test") ) == "test" // true
int2str( str2int("t€st") ) // "t¬st", because "€".charCodeAt(0) is 8364, will be AND'ed with 0xff
Limitations:
maximum 4 characters, so it fits into an integer
*/
function str2int(the_str) {
var ret = 0;
var len = the_str.length;
if (len >= 1) ret += (the_str.charCodeAt(0) & 0xff) << 0;
if (len >= 2) ret += (the_str.charCodeAt(1) & 0xff) << 8;
if (len >= 3) ret += (the_str.charCodeAt(2) & 0xff) << 16;
if (len >= 4) ret += (the_str.charCodeAt(3) & 0xff) << 24;
return ret;
}
function int2str(the_int) {
var tmp = [
(the_int & 0x000000ff) >> 0,
(the_int & 0x0000ff00) >> 8,
(the_int & 0x00ff0000) >> 16,
(the_int & 0xff000000) >> 24
];
var ret = "";
for (var i=0; i<4; i++) {
if (tmp[i] == 0)
break;
ret += String.fromCharCode(tmp[i]);
}
return ret;
}
String to Number in JavaScript:
Unary + (most recommended)
+numStr is easy to use and has better performance compared with others
Supports both integers and decimals
console.log(+'123.45') // => 123.45
Some other options:
Parsing Strings:
parseInt(numStr) for integers
parseFloat(numStr) for both integers and decimals
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
JavaScript Functions
Math functions like round(numStr), floor(numStr), ceil(numStr) for integers
Number(numStr) for both integers and decimals
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
Unary Operators
All basic unary operators, +numStr, numStr-0, 1*numStr, numStr*1, and numStr/1
All support both integers and decimals
Be cautious about numStr+0. It returns a string.
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // =>3.3
console.log('123.123'+0, typeof ('123.123' + 0)) // => 123.1230 string
Bitwise Operators
Two tilde ~~numStr or left shift 0, numStr<<0
Supports only integers, but not decimals
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
// Parsing
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
// Function
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
// Unary
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // => 3.3
console.log('123.123'+0, typeof ('123.123'+0)) // => 123.1230 string
// Bitwise
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
function parseIntSmarter(str) {
// ParseInt is bad because it returns 22 for "22thisendsintext"
// Number() is returns NaN if it ends in non-numbers, but it returns 0 for empty or whitespace strings.
return isNaN(Number(str)) ? NaN : parseInt(str, 10);
}
You can use plus.
For example:
var personAge = '24';
var personAge1 = (+personAge)
then you can see the new variable's type bytypeof personAge1 ; which is number.
Summing the multiplication of digits with their respective power of ten:
i.e: 123 = 100+20+3 = 1100 + 2+10 + 31 = 1*(10^2) + 2*(10^1) + 3*(10^0)
function atoi(array) {
// Use exp as (length - i), other option would be
// to reverse the array.
// Multiply a[i] * 10^(exp) and sum
let sum = 0;
for (let i = 0; i < array.length; i++) {
let exp = array.length - (i+1);
let value = array[i] * Math.pow(10, exp);
sum += value;
}
return sum;
}
The safest way to ensure you get a valid integer:
let integer = (parseInt(value, 10) || 0);
Examples:
// Example 1 - Invalid value:
let value = null;
let integer = (parseInt(value, 10) || 0);
// => integer = 0
// Example 2 - Valid value:
let value = "1230.42";
let integer = (parseInt(value, 10) || 0);
// => integer = 1230
// Example 3 - Invalid value:
let value = () => { return 412 };
let integer = (parseInt(value, 10) || 0);
// => integer = 0
Another option is to double XOR the value with itself:
var i = 12.34;
console.log('i = ' + i);
console.log('i ⊕ i ⊕ i = ' + (i ^ i ^ i));
This will output:
i = 12.34
i ⊕ i ⊕ i = 12
I only added one plus(+) before string and that was solution!
+"052254" // 52254
Number()
Number(" 200.12 ") // Returns 200.12
Number("200.12") // Returns 200.12
Number("200") // Returns 200
parseInt()
parseInt(" 200.12 ") // Return 200
parseInt("200.12") // Return 200
parseInt("200") // Return 200
parseInt("Text information") // Returns NaN
parseFloat()
It will return the first number
parseFloat("200 400") // Returns 200
parseFloat("200") // Returns 200
parseFloat("Text information") // Returns NaN
parseFloat("200.10") // Return 200.10
Math.floor()
Round a number to the nearest integer
Math.floor(" 200.12 ") // Return 200
Math.floor("200.12") // Return 200
Math.floor("200") // Return 200
function doSth(){
var a = document.getElementById('input').value;
document.getElementById('number').innerHTML = toNumber(a) + 1;
}
function toNumber(str){
return +str;
}
<input id="input" type="text">
<input onclick="doSth()" type="submit">
<span id="number"></span>
This (probably) isn't the best solution for parsing an integer, but if you need to "extract" one, for example:
"1a2b3c" === 123
"198some text2hello world!30" === 198230
// ...
this would work (only for integers):
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (!isNaN(str[i - 1])) {
result += parseInt(str[i - 1]) * factor
factor *= 10
}
}
return result
}
console.log(extractInteger(str))
Of course, this would also work for parsing an integer, but would be slower than other methods.
You could also parse integers with this method and return NaN if the string isn't a number, but I don't see why you'd want to since this relies on parseInt internally and parseInt is probably faster.
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (isNaN(str[i - 1])) return NaN
result += parseInt(str[i - 1]) * factor
factor *= 10
}
return result
}
console.log(extractInteger(str))
I have a floating point number:
var f = 0.1457;
Or:
var f = 4.7005
How do I get just the fraction remainder as integer?
I.e. in the first example I want to get:
var remainder = 1457;
In the second example:
var remainder = 7005;
function frac(f) {
return f % 1;
}
While this is not what most people will want, but TS asked for fract as integer, here it is:
function fract(n){ return Number(String(n).split('.')[1] || 0); }
fract(1.23) // = 23
fract(123) // = 0
fract(0.0008) // = 8
This will do it (up to the 4 digits that you want, change the multipler (10000) to larger or smaller if you want smaller or larger number):
Math.ceil(((f < 1.0) ? f : (f % Math.floor(f))) * 10000)
parseInt(parseFloat(amount).toString().split('.')[1], 10)
You can subtract the floor of the number, giving you just the fractional part, and then multiply by 10000, i.e.:
var remainder = (f-Math.floor(f))*10000;
I would argue that, assuming we want to display these values to the user, treating these numbers as strings would be the best approach. This gets round the issue of fractional values such as 0.002.
I came accross this issue when trying to display prices with the cents in superscript.
let price = 23.43; // 23.43
let strPrice = price.toFixed(2) + ''; // "23.43"
let integer = strPrice.split(".")[0] // "23"
let fractional = strPrice.split(".")[1] // "43"
This also depends on what you want to do with the remainder (as commenters already asked). For instance, if the base number is 1.03, do you want the returned remainder as 3 or 03 -- I mean, do you want it as a number or as a string (for purposes of displaying it to the user). One example would be article price display, where you don't want to conver 03 to 3 (for instance $1.03) where you want to superscript 03.
Next, the problem is with float precision. Consider this:
var price = 1.03;
var frac = (price - Math.floor(price))*100;
// frac = 3.0000000000000027
So you can "solve" this by slicing the string representation without multiplication (and optional zero-padding) in such cases. At the same time, you avoid floating precision issue. Also demonstrated in this jsfiddle.
This post about floating precision might help as well as this one.
var strNumber = f.toString();
var remainder = strNumber.substr(strNumber.indexOf('.') + 1, 4);
remainder = Number(reminder);
Similar method to Martina's answer with a basic modulo operation but solves some of the issues in the comments by returning the same number of decimal places as passed in.
Modifies a method from an answer to a different question on SO which handles the scientific notation for small floats.
Additionally allows the fractional part to be returned as an integer (ie OP's request).
function sfract(n, toInt) {
toInt = false || toInt;
let dec = n.toString().split('e-');
let places = dec.length > 1
? parseInt(dec[1], 10)
: Math.floor(n) !== n ? dec[0].split('.')[1].length : 0;
let fract = parseFloat((n%1).toFixed(places));
return toInt ? fract * Math.pow(10,places) : fract;
};
Tests
function sfract(n, toInt) {
toInt = false || toInt;
let dec = n.toString().split('e-');
let places = dec.length > 1
? parseInt(dec[1], 10)
: Math.floor(n) !== n ? dec[0].split('.')[1].length : 0;
let fract = parseFloat((n%1).toFixed(places));
return toInt ? fract * Math.pow(10,places) : fract;
};
console.log(sfract(0.0000005)); // 5e-7
console.log(sfract(0.0000005, true)); // 5
console.log(sfract(4444)); // 0
console.log(sfract(4444, true)); // 0
console.log(sfract(44444.0000005)); // 5e-7
console.log(sfract(44444.00052121, true)); // 52121
console.log(sfract(34.5697)); // 0.5697
console.log(sfract(730.4583333333321, true)); // 4583333333321
#Udara Seneviratne
const findFraction = (num) => {
return parseInt( // 5.---------------- And finally we parses a "string" type and returns an integer
// 1. We convert our parameter "num" to the "string" type (to work as with an array in the next step)
// result: "1.012312"
num.toString()
// 2. Here we separating the string as an array using the separator: " . "
// result: ["1", "012312"]
// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/split
.split('.')
// 3. With help a method "Array.splice" we cut the first element of our array
// result: ["012312"]
// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice
.splice(1.1)
// 4. With help a method "Array.shift" we remove the first element from an array and returns that
// result: 012312 (But it's still the "string" type)
// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/shift
.shift()
)
}
// Try it
console.log("Result is = " + findFraction (1.012312))
// Type of result
console.log("Type of result = " + typeof findFraction (1.012312))
// Some later operation
console.log("Result + some number is = " + findFraction (1.012312) + 555)
How to verify if an input type number contains a maximum of 3 decimals, without using regex?
let x = 1.5555
let y = 1.55
x is false
y is true
You can use a formula like:
(x * 10**N) % 1 === 0
Here x is your number that potentially contains decimals (eg: 1.555) and N is the maximum amount of decimal places you want to allow for.
Eg, for numbers with 3 (N = 3) or fewer decimal places, you will get x*1000, which will evaluate to an integer. Eg:
1.55 -> 1550
1.555 -> 1555
For numbers with more than 3 decimal places, doing x*1000 won't convert it to an int, it will only shift parts of the number over:
1.5555 -> 1555.5 // still a decimal
The % 1 check then gets the remainder of the above number if it was to be divided by 1. If the remainder is 0, then the number was converted to an integer, if it is more than 0, then x*1000 failed to convert the number to an int, meaning that it has more than 3 decimals:
const validate = (x, N) => (x * 10**N) % 1 === 0;
console.log(validate(1.5555, 3)); // false
console.log(validate(1.55, 3)); // true
console.log(validate(1.555, 3)); // true
console.log(validate(0.00000001, 3)); // false
You can convert to string using the toString() method, then split at the point . with the .split() method this will result in an array.
The first element in the array is a string containing the whole number part which is not interesting here for us.
The second element at indice 1 in the resulting array is the decimal part as string.
Now you can check the length property of this string if it is equal or less then three which means it has three or less decimal numbers then we return true in the validation function when not we return false.
const x = 1.5555;
const y = 1.555;
const z = 1.55
function validate(num){
return num.toString().split(".")[1].length <= 3;
}
console.log(validate(x));
console.log(validate(y));
console.log(validate(z));
This may solve your problem
let x = 1.5555;
let y = 1.55;
int length = x.Substring(number.IndexOf(".")).Length;
bool result = length > 3 ? true: false;
How do I convert a string to an integer in JavaScript?
The simplest way would be to use the native Number function:
var x = Number("1000")
If that doesn't work for you, then there are the parseInt, unary plus, parseFloat with floor, and Math.round methods.
parseInt()
var x = parseInt("1000", 10); // You want to use radix 10
// So you get a decimal number even with a leading 0 and an old browser ([IE8, Firefox 20, Chrome 22 and older][1])
Unary plus
If your string is already in the form of an integer:
var x = +"1000";
floor()
If your string is or might be a float and you want an integer:
var x = Math.floor("1000.01"); // floor() automatically converts string to number
Or, if you're going to be using Math.floor several times:
var floor = Math.floor;
var x = floor("1000.01");
parseFloat()
If you're the type who forgets to put the radix in when you call parseInt, you can use parseFloat and round it however you like. Here I use floor.
var floor = Math.floor;
var x = floor(parseFloat("1000.01"));
round()
Interestingly, Math.round (like Math.floor) will do a string to number conversion, so if you want the number rounded (or if you have an integer in the string), this is a great way, maybe my favorite:
var round = Math.round;
var x = round("1000"); // Equivalent to round("1000", 0)
Try parseInt function:
var number = parseInt("10");
But there is a problem. If you try to convert "010" using parseInt function, it detects as octal number, and will return number 8. So, you need to specify a radix (from 2 to 36). In this case base 10.
parseInt(string, radix)
Example:
var result = parseInt("010", 10) == 10; // Returns true
var result = parseInt("010") == 10; // Returns false
Note that parseInt ignores bad data after parsing anything valid.
This guid will parse as 51:
var result = parseInt('51e3daf6-b521-446a-9f5b-a1bb4d8bac36', 10) == 51; // Returns true
There are two main ways to convert a string to a number in JavaScript. One way is to parse it and the other way is to change its type to a Number. All of the tricks in the other answers (e.g., unary plus) involve implicitly coercing the type of the string to a number. You can also do the same thing explicitly with the Number function.
Parsing
var parsed = parseInt("97", 10);
parseInt and parseFloat are the two functions used for parsing strings to numbers. Parsing will stop silently if it hits a character it doesn't recognise, which can be useful for parsing strings like "92px", but it's also somewhat dangerous, since it won't give you any kind of error on bad input, instead you'll get back NaN unless the string starts with a number. Whitespace at the beginning of the string is ignored. Here's an example of it doing something different to what you want, and giving no indication that anything went wrong:
var widgetsSold = parseInt("97,800", 10); // widgetsSold is now 97
It's good practice to always specify the radix as the second argument. In older browsers, if the string started with a 0, it would be interpreted as octal if the radix wasn't specified which took a lot of people by surprise. The behaviour for hexadecimal is triggered by having the string start with 0x if no radix is specified, e.g., 0xff. The standard actually changed with ECMAScript 5, so modern browsers no longer trigger octal when there's a leading 0 if no radix has been specified. parseInt understands radixes up to base 36, in which case both upper and lower case letters are treated as equivalent.
Changing the Type of a String to a Number
All of the other tricks mentioned above that don't use parseInt, involve implicitly coercing the string into a number. I prefer to do this explicitly,
var cast = Number("97");
This has different behavior to the parse methods (although it still ignores whitespace). It's more strict: if it doesn't understand the whole of the string than it returns NaN, so you can't use it for strings like 97px. Since you want a primitive number rather than a Number wrapper object, make sure you don't put new in front of the Number function.
Obviously, converting to a Number gives you a value that might be a float rather than an integer, so if you want an integer, you need to modify it. There are a few ways of doing this:
var rounded = Math.floor(Number("97.654")); // other options are Math.ceil, Math.round
var fixed = Number("97.654").toFixed(0); // rounded rather than truncated
var bitwised = Number("97.654")|0; // do not use for large numbers
Any bitwise operator (here I've done a bitwise or, but you could also do double negation as in an earlier answer or a bit shift) will convert the value to a 32 bit integer, and most of them will convert to a signed integer. Note that this will not do want you want for large integers. If the integer cannot be represented in 32 bits, it will wrap.
~~"3000000000.654" === -1294967296
// This is the same as
Number("3000000000.654")|0
"3000000000.654" >>> 0 === 3000000000 // unsigned right shift gives you an extra bit
"300000000000.654" >>> 0 === 3647256576 // but still fails with larger numbers
To work correctly with larger numbers, you should use the rounding methods
Math.floor("3000000000.654") === 3000000000
// This is the same as
Math.floor(Number("3000000000.654"))
Bear in mind that coercion understands exponential notation and Infinity, so 2e2 is 200 rather than NaN, while the parse methods don't.
Custom
It's unlikely that either of these methods do exactly what you want. For example, usually I would want an error thrown if parsing fails, and I don't need support for Infinity, exponentials or leading whitespace. Depending on your use case, sometimes it makes sense to write a custom conversion function.
Always check that the output of Number or one of the parse methods is the sort of number you expect. You will almost certainly want to use isNaN to make sure the number is not NaN (usually the only way you find out that the parse failed).
ParseInt() and + are different
parseInt("10.3456") // returns 10
+"10.3456" // returns 10.3456
Fastest
var x = "1000"*1;
Test
Here is little comparison of speed (macOS only)... :)
For Chrome, 'plus' and 'mul' are fastest (>700,000,00 op/sec), 'Math.floor' is slowest. For Firefox, 'plus' is slowest (!) 'mul' is fastest (>900,000,000 op/sec). In Safari 'parseInt' is fastest, 'number' is slowest (but results are quite similar, >13,000,000 <31,000,000). So Safari for cast string to int is more than 10x slower than other browsers. So the winner is 'mul' :)
You can run it on your browser by this link
https://jsperf.com/js-cast-str-to-number/1
I also tested var x = ~~"1000";. On Chrome and Safari, it is a little bit slower than var x = "1000"*1 (<1%), and on Firefox it is a little bit faster (<1%).
I use this way of converting string to number:
var str = "25"; // String
var number = str*1; // Number
So, when multiplying by 1, the value does not change, but JavaScript automatically returns a number.
But as it is shown below, this should be used if you are sure that the str is a number (or can be represented as a number), otherwise it will return NaN - not a number.
You can create simple function to use, e.g.,
function toNumber(str) {
return str*1;
}
Try parseInt.
var number = parseInt("10", 10); //number will have value of 10.
I love this trick:
~~"2.123"; //2
~~"5"; //5
The double bitwise negative drops off anything after the decimal point AND converts it to a number format. I've been told it's slightly faster than calling functions and whatnot, but I'm not entirely convinced.
Another method I just saw here (a question about the JavaScript >>> operator, which is a zero-fill right shift) which shows that shifting a number by 0 with this operator converts the number to a uint32 which is nice if you also want it unsigned. Again, this converts to an unsigned integer, which can lead to strange behaviors if you use a signed number.
"-2.123" >>> 0; // 4294967294
"2.123" >>> 0; // 2
"-5" >>> 0; // 4294967291
"5" >>> 0; // 5
In JavaScript, you can do the following:
ParseInt
parseInt("10.5") // Returns 10
Multiplying with 1
var s = "10";
s = s*1; // Returns 10
Using the unary operator (+)
var s = "10";
s = +s; // Returns 10
Using a bitwise operator
(Note: It starts to break after 2140000000. Example: ~~"2150000000" = -2144967296)
var s = "10.5";
s = ~~s; // Returns 10
Using Math.floor() or Math.ceil()
var s = "10";
s = Math.floor(s) || Math.ceil(s); // Returns 10
Please see the below example. It will help answer your question.
Example Result
parseInt("4") 4
parseInt("5aaa") 5
parseInt("4.33333") 4
parseInt("aaa"); NaN (means "Not a Number")
By using parseint function, it will only give op of integer present and not the string.
Beware if you use parseInt to convert a float in scientific notation!
For example:
parseInt("5.6e-14")
will result in
5
instead of
0
Also as a side note: MooTools has the function toInt() which is used on any native string (or float (or integer)).
"2".toInt() // 2
"2px".toInt() // 2
2.toInt() // 2
We can use +(stringOfNumber) instead of using parseInt(stringOfNumber).
Example: +("21") returns int of 21, like the parseInt("21").
We can use this unary "+" operator for parsing float too...
To convert a String into Integer, I recommend using parseFloat and not parseInt. Here's why:
Using parseFloat:
parseFloat('2.34cms') //Output: 2.34
parseFloat('12.5') //Output: 12.5
parseFloat('012.3') //Output: 12.3
Using parseInt:
parseInt('2.34cms') //Output: 2
parseInt('12.5') //Output: 12
parseInt('012.3') //Output: 12
So if you have noticed parseInt discards the values after the decimals, whereas parseFloat lets you work with floating point numbers and hence more suitable if you want to retain the values after decimals. Use parseInt if and only if you are sure that you want the integer value.
There are many ways in JavaScript to convert a string to a number value... All are simple and handy. Choose the way which one works for you:
var num = Number("999.5"); //999.5
var num = parseInt("999.5", 10); //999
var num = parseFloat("999.5"); //999.5
var num = +"999.5"; //999.5
Also, any Math operation converts them to number, for example...
var num = "999.5" / 1; //999.5
var num = "999.5" * 1; //999.5
var num = "999.5" - 1 + 1; //999.5
var num = "999.5" - 0; //999.5
var num = Math.floor("999.5"); //999
var num = ~~"999.5"; //999
My prefer way is using + sign, which is the elegant way to convert a string to number in JavaScript.
Try str - 0 to convert string to number.
> str = '0'
> str - 0
0
> str = '123'
> str - 0
123
> str = '-12'
> str - 0
-12
> str = 'asdf'
> str - 0
NaN
> str = '12.34'
> str - 0
12.34
Here are two links to compare the performance of several ways to convert string to int
https://jsperf.com/number-vs-parseint-vs-plus
http://phrogz.net/js/string_to_number.html
Here is the easiest solution
let myNumber = "123" | 0;
More easy solution
let myNumber = +"123";
In my opinion, no answer covers all edge cases as parsing a float should result in an error.
function parseInteger(value) {
if(value === '') return NaN;
const number = Number(value);
return Number.isInteger(number) ? number : NaN;
}
parseInteger("4") // 4
parseInteger("5aaa") // NaN
parseInteger("4.33333") // NaN
parseInteger("aaa"); // NaN
The easiest way would be to use + like this
const strTen = "10"
const numTen = +strTen // string to number conversion
console.log(typeof strTen) // string
console.log(typeof numTen) // number
I actually needed to "save" a string as an integer, for a binding between C and JavaScript, so I convert the string into an integer value:
/*
Examples:
int2str( str2int("test") ) == "test" // true
int2str( str2int("t€st") ) // "t¬st", because "€".charCodeAt(0) is 8364, will be AND'ed with 0xff
Limitations:
maximum 4 characters, so it fits into an integer
*/
function str2int(the_str) {
var ret = 0;
var len = the_str.length;
if (len >= 1) ret += (the_str.charCodeAt(0) & 0xff) << 0;
if (len >= 2) ret += (the_str.charCodeAt(1) & 0xff) << 8;
if (len >= 3) ret += (the_str.charCodeAt(2) & 0xff) << 16;
if (len >= 4) ret += (the_str.charCodeAt(3) & 0xff) << 24;
return ret;
}
function int2str(the_int) {
var tmp = [
(the_int & 0x000000ff) >> 0,
(the_int & 0x0000ff00) >> 8,
(the_int & 0x00ff0000) >> 16,
(the_int & 0xff000000) >> 24
];
var ret = "";
for (var i=0; i<4; i++) {
if (tmp[i] == 0)
break;
ret += String.fromCharCode(tmp[i]);
}
return ret;
}
String to Number in JavaScript:
Unary + (most recommended)
+numStr is easy to use and has better performance compared with others
Supports both integers and decimals
console.log(+'123.45') // => 123.45
Some other options:
Parsing Strings:
parseInt(numStr) for integers
parseFloat(numStr) for both integers and decimals
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
JavaScript Functions
Math functions like round(numStr), floor(numStr), ceil(numStr) for integers
Number(numStr) for both integers and decimals
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
Unary Operators
All basic unary operators, +numStr, numStr-0, 1*numStr, numStr*1, and numStr/1
All support both integers and decimals
Be cautious about numStr+0. It returns a string.
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // =>3.3
console.log('123.123'+0, typeof ('123.123' + 0)) // => 123.1230 string
Bitwise Operators
Two tilde ~~numStr or left shift 0, numStr<<0
Supports only integers, but not decimals
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
// Parsing
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
// Function
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
// Unary
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // => 3.3
console.log('123.123'+0, typeof ('123.123'+0)) // => 123.1230 string
// Bitwise
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
function parseIntSmarter(str) {
// ParseInt is bad because it returns 22 for "22thisendsintext"
// Number() is returns NaN if it ends in non-numbers, but it returns 0 for empty or whitespace strings.
return isNaN(Number(str)) ? NaN : parseInt(str, 10);
}
You can use plus.
For example:
var personAge = '24';
var personAge1 = (+personAge)
then you can see the new variable's type bytypeof personAge1 ; which is number.
Summing the multiplication of digits with their respective power of ten:
i.e: 123 = 100+20+3 = 1100 + 2+10 + 31 = 1*(10^2) + 2*(10^1) + 3*(10^0)
function atoi(array) {
// Use exp as (length - i), other option would be
// to reverse the array.
// Multiply a[i] * 10^(exp) and sum
let sum = 0;
for (let i = 0; i < array.length; i++) {
let exp = array.length - (i+1);
let value = array[i] * Math.pow(10, exp);
sum += value;
}
return sum;
}
The safest way to ensure you get a valid integer:
let integer = (parseInt(value, 10) || 0);
Examples:
// Example 1 - Invalid value:
let value = null;
let integer = (parseInt(value, 10) || 0);
// => integer = 0
// Example 2 - Valid value:
let value = "1230.42";
let integer = (parseInt(value, 10) || 0);
// => integer = 1230
// Example 3 - Invalid value:
let value = () => { return 412 };
let integer = (parseInt(value, 10) || 0);
// => integer = 0
Another option is to double XOR the value with itself:
var i = 12.34;
console.log('i = ' + i);
console.log('i ⊕ i ⊕ i = ' + (i ^ i ^ i));
This will output:
i = 12.34
i ⊕ i ⊕ i = 12
I only added one plus(+) before string and that was solution!
+"052254" // 52254
Number()
Number(" 200.12 ") // Returns 200.12
Number("200.12") // Returns 200.12
Number("200") // Returns 200
parseInt()
parseInt(" 200.12 ") // Return 200
parseInt("200.12") // Return 200
parseInt("200") // Return 200
parseInt("Text information") // Returns NaN
parseFloat()
It will return the first number
parseFloat("200 400") // Returns 200
parseFloat("200") // Returns 200
parseFloat("Text information") // Returns NaN
parseFloat("200.10") // Return 200.10
Math.floor()
Round a number to the nearest integer
Math.floor(" 200.12 ") // Return 200
Math.floor("200.12") // Return 200
Math.floor("200") // Return 200
function doSth(){
var a = document.getElementById('input').value;
document.getElementById('number').innerHTML = toNumber(a) + 1;
}
function toNumber(str){
return +str;
}
<input id="input" type="text">
<input onclick="doSth()" type="submit">
<span id="number"></span>
This (probably) isn't the best solution for parsing an integer, but if you need to "extract" one, for example:
"1a2b3c" === 123
"198some text2hello world!30" === 198230
// ...
this would work (only for integers):
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (!isNaN(str[i - 1])) {
result += parseInt(str[i - 1]) * factor
factor *= 10
}
}
return result
}
console.log(extractInteger(str))
Of course, this would also work for parsing an integer, but would be slower than other methods.
You could also parse integers with this method and return NaN if the string isn't a number, but I don't see why you'd want to since this relies on parseInt internally and parseInt is probably faster.
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (isNaN(str[i - 1])) return NaN
result += parseInt(str[i - 1]) * factor
factor *= 10
}
return result
}
console.log(extractInteger(str))
How do I convert a string to an integer in JavaScript?
The simplest way would be to use the native Number function:
var x = Number("1000")
If that doesn't work for you, then there are the parseInt, unary plus, parseFloat with floor, and Math.round methods.
parseInt()
var x = parseInt("1000", 10); // You want to use radix 10
// So you get a decimal number even with a leading 0 and an old browser ([IE8, Firefox 20, Chrome 22 and older][1])
Unary plus
If your string is already in the form of an integer:
var x = +"1000";
floor()
If your string is or might be a float and you want an integer:
var x = Math.floor("1000.01"); // floor() automatically converts string to number
Or, if you're going to be using Math.floor several times:
var floor = Math.floor;
var x = floor("1000.01");
parseFloat()
If you're the type who forgets to put the radix in when you call parseInt, you can use parseFloat and round it however you like. Here I use floor.
var floor = Math.floor;
var x = floor(parseFloat("1000.01"));
round()
Interestingly, Math.round (like Math.floor) will do a string to number conversion, so if you want the number rounded (or if you have an integer in the string), this is a great way, maybe my favorite:
var round = Math.round;
var x = round("1000"); // Equivalent to round("1000", 0)
Try parseInt function:
var number = parseInt("10");
But there is a problem. If you try to convert "010" using parseInt function, it detects as octal number, and will return number 8. So, you need to specify a radix (from 2 to 36). In this case base 10.
parseInt(string, radix)
Example:
var result = parseInt("010", 10) == 10; // Returns true
var result = parseInt("010") == 10; // Returns false
Note that parseInt ignores bad data after parsing anything valid.
This guid will parse as 51:
var result = parseInt('51e3daf6-b521-446a-9f5b-a1bb4d8bac36', 10) == 51; // Returns true
There are two main ways to convert a string to a number in JavaScript. One way is to parse it and the other way is to change its type to a Number. All of the tricks in the other answers (e.g., unary plus) involve implicitly coercing the type of the string to a number. You can also do the same thing explicitly with the Number function.
Parsing
var parsed = parseInt("97", 10);
parseInt and parseFloat are the two functions used for parsing strings to numbers. Parsing will stop silently if it hits a character it doesn't recognise, which can be useful for parsing strings like "92px", but it's also somewhat dangerous, since it won't give you any kind of error on bad input, instead you'll get back NaN unless the string starts with a number. Whitespace at the beginning of the string is ignored. Here's an example of it doing something different to what you want, and giving no indication that anything went wrong:
var widgetsSold = parseInt("97,800", 10); // widgetsSold is now 97
It's good practice to always specify the radix as the second argument. In older browsers, if the string started with a 0, it would be interpreted as octal if the radix wasn't specified which took a lot of people by surprise. The behaviour for hexadecimal is triggered by having the string start with 0x if no radix is specified, e.g., 0xff. The standard actually changed with ECMAScript 5, so modern browsers no longer trigger octal when there's a leading 0 if no radix has been specified. parseInt understands radixes up to base 36, in which case both upper and lower case letters are treated as equivalent.
Changing the Type of a String to a Number
All of the other tricks mentioned above that don't use parseInt, involve implicitly coercing the string into a number. I prefer to do this explicitly,
var cast = Number("97");
This has different behavior to the parse methods (although it still ignores whitespace). It's more strict: if it doesn't understand the whole of the string than it returns NaN, so you can't use it for strings like 97px. Since you want a primitive number rather than a Number wrapper object, make sure you don't put new in front of the Number function.
Obviously, converting to a Number gives you a value that might be a float rather than an integer, so if you want an integer, you need to modify it. There are a few ways of doing this:
var rounded = Math.floor(Number("97.654")); // other options are Math.ceil, Math.round
var fixed = Number("97.654").toFixed(0); // rounded rather than truncated
var bitwised = Number("97.654")|0; // do not use for large numbers
Any bitwise operator (here I've done a bitwise or, but you could also do double negation as in an earlier answer or a bit shift) will convert the value to a 32 bit integer, and most of them will convert to a signed integer. Note that this will not do want you want for large integers. If the integer cannot be represented in 32 bits, it will wrap.
~~"3000000000.654" === -1294967296
// This is the same as
Number("3000000000.654")|0
"3000000000.654" >>> 0 === 3000000000 // unsigned right shift gives you an extra bit
"300000000000.654" >>> 0 === 3647256576 // but still fails with larger numbers
To work correctly with larger numbers, you should use the rounding methods
Math.floor("3000000000.654") === 3000000000
// This is the same as
Math.floor(Number("3000000000.654"))
Bear in mind that coercion understands exponential notation and Infinity, so 2e2 is 200 rather than NaN, while the parse methods don't.
Custom
It's unlikely that either of these methods do exactly what you want. For example, usually I would want an error thrown if parsing fails, and I don't need support for Infinity, exponentials or leading whitespace. Depending on your use case, sometimes it makes sense to write a custom conversion function.
Always check that the output of Number or one of the parse methods is the sort of number you expect. You will almost certainly want to use isNaN to make sure the number is not NaN (usually the only way you find out that the parse failed).
ParseInt() and + are different
parseInt("10.3456") // returns 10
+"10.3456" // returns 10.3456
Fastest
var x = "1000"*1;
Test
Here is little comparison of speed (macOS only)... :)
For Chrome, 'plus' and 'mul' are fastest (>700,000,00 op/sec), 'Math.floor' is slowest. For Firefox, 'plus' is slowest (!) 'mul' is fastest (>900,000,000 op/sec). In Safari 'parseInt' is fastest, 'number' is slowest (but results are quite similar, >13,000,000 <31,000,000). So Safari for cast string to int is more than 10x slower than other browsers. So the winner is 'mul' :)
You can run it on your browser by this link
https://jsperf.com/js-cast-str-to-number/1
I also tested var x = ~~"1000";. On Chrome and Safari, it is a little bit slower than var x = "1000"*1 (<1%), and on Firefox it is a little bit faster (<1%).
I use this way of converting string to number:
var str = "25"; // String
var number = str*1; // Number
So, when multiplying by 1, the value does not change, but JavaScript automatically returns a number.
But as it is shown below, this should be used if you are sure that the str is a number (or can be represented as a number), otherwise it will return NaN - not a number.
You can create simple function to use, e.g.,
function toNumber(str) {
return str*1;
}
Try parseInt.
var number = parseInt("10", 10); //number will have value of 10.
I love this trick:
~~"2.123"; //2
~~"5"; //5
The double bitwise negative drops off anything after the decimal point AND converts it to a number format. I've been told it's slightly faster than calling functions and whatnot, but I'm not entirely convinced.
Another method I just saw here (a question about the JavaScript >>> operator, which is a zero-fill right shift) which shows that shifting a number by 0 with this operator converts the number to a uint32 which is nice if you also want it unsigned. Again, this converts to an unsigned integer, which can lead to strange behaviors if you use a signed number.
"-2.123" >>> 0; // 4294967294
"2.123" >>> 0; // 2
"-5" >>> 0; // 4294967291
"5" >>> 0; // 5
In JavaScript, you can do the following:
ParseInt
parseInt("10.5") // Returns 10
Multiplying with 1
var s = "10";
s = s*1; // Returns 10
Using the unary operator (+)
var s = "10";
s = +s; // Returns 10
Using a bitwise operator
(Note: It starts to break after 2140000000. Example: ~~"2150000000" = -2144967296)
var s = "10.5";
s = ~~s; // Returns 10
Using Math.floor() or Math.ceil()
var s = "10";
s = Math.floor(s) || Math.ceil(s); // Returns 10
Please see the below example. It will help answer your question.
Example Result
parseInt("4") 4
parseInt("5aaa") 5
parseInt("4.33333") 4
parseInt("aaa"); NaN (means "Not a Number")
By using parseint function, it will only give op of integer present and not the string.
Beware if you use parseInt to convert a float in scientific notation!
For example:
parseInt("5.6e-14")
will result in
5
instead of
0
Also as a side note: MooTools has the function toInt() which is used on any native string (or float (or integer)).
"2".toInt() // 2
"2px".toInt() // 2
2.toInt() // 2
We can use +(stringOfNumber) instead of using parseInt(stringOfNumber).
Example: +("21") returns int of 21, like the parseInt("21").
We can use this unary "+" operator for parsing float too...
To convert a String into Integer, I recommend using parseFloat and not parseInt. Here's why:
Using parseFloat:
parseFloat('2.34cms') //Output: 2.34
parseFloat('12.5') //Output: 12.5
parseFloat('012.3') //Output: 12.3
Using parseInt:
parseInt('2.34cms') //Output: 2
parseInt('12.5') //Output: 12
parseInt('012.3') //Output: 12
So if you have noticed parseInt discards the values after the decimals, whereas parseFloat lets you work with floating point numbers and hence more suitable if you want to retain the values after decimals. Use parseInt if and only if you are sure that you want the integer value.
There are many ways in JavaScript to convert a string to a number value... All are simple and handy. Choose the way which one works for you:
var num = Number("999.5"); //999.5
var num = parseInt("999.5", 10); //999
var num = parseFloat("999.5"); //999.5
var num = +"999.5"; //999.5
Also, any Math operation converts them to number, for example...
var num = "999.5" / 1; //999.5
var num = "999.5" * 1; //999.5
var num = "999.5" - 1 + 1; //999.5
var num = "999.5" - 0; //999.5
var num = Math.floor("999.5"); //999
var num = ~~"999.5"; //999
My prefer way is using + sign, which is the elegant way to convert a string to number in JavaScript.
Try str - 0 to convert string to number.
> str = '0'
> str - 0
0
> str = '123'
> str - 0
123
> str = '-12'
> str - 0
-12
> str = 'asdf'
> str - 0
NaN
> str = '12.34'
> str - 0
12.34
Here are two links to compare the performance of several ways to convert string to int
https://jsperf.com/number-vs-parseint-vs-plus
http://phrogz.net/js/string_to_number.html
Here is the easiest solution
let myNumber = "123" | 0;
More easy solution
let myNumber = +"123";
In my opinion, no answer covers all edge cases as parsing a float should result in an error.
function parseInteger(value) {
if(value === '') return NaN;
const number = Number(value);
return Number.isInteger(number) ? number : NaN;
}
parseInteger("4") // 4
parseInteger("5aaa") // NaN
parseInteger("4.33333") // NaN
parseInteger("aaa"); // NaN
The easiest way would be to use + like this
const strTen = "10"
const numTen = +strTen // string to number conversion
console.log(typeof strTen) // string
console.log(typeof numTen) // number
I actually needed to "save" a string as an integer, for a binding between C and JavaScript, so I convert the string into an integer value:
/*
Examples:
int2str( str2int("test") ) == "test" // true
int2str( str2int("t€st") ) // "t¬st", because "€".charCodeAt(0) is 8364, will be AND'ed with 0xff
Limitations:
maximum 4 characters, so it fits into an integer
*/
function str2int(the_str) {
var ret = 0;
var len = the_str.length;
if (len >= 1) ret += (the_str.charCodeAt(0) & 0xff) << 0;
if (len >= 2) ret += (the_str.charCodeAt(1) & 0xff) << 8;
if (len >= 3) ret += (the_str.charCodeAt(2) & 0xff) << 16;
if (len >= 4) ret += (the_str.charCodeAt(3) & 0xff) << 24;
return ret;
}
function int2str(the_int) {
var tmp = [
(the_int & 0x000000ff) >> 0,
(the_int & 0x0000ff00) >> 8,
(the_int & 0x00ff0000) >> 16,
(the_int & 0xff000000) >> 24
];
var ret = "";
for (var i=0; i<4; i++) {
if (tmp[i] == 0)
break;
ret += String.fromCharCode(tmp[i]);
}
return ret;
}
String to Number in JavaScript:
Unary + (most recommended)
+numStr is easy to use and has better performance compared with others
Supports both integers and decimals
console.log(+'123.45') // => 123.45
Some other options:
Parsing Strings:
parseInt(numStr) for integers
parseFloat(numStr) for both integers and decimals
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
JavaScript Functions
Math functions like round(numStr), floor(numStr), ceil(numStr) for integers
Number(numStr) for both integers and decimals
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
Unary Operators
All basic unary operators, +numStr, numStr-0, 1*numStr, numStr*1, and numStr/1
All support both integers and decimals
Be cautious about numStr+0. It returns a string.
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // =>3.3
console.log('123.123'+0, typeof ('123.123' + 0)) // => 123.1230 string
Bitwise Operators
Two tilde ~~numStr or left shift 0, numStr<<0
Supports only integers, but not decimals
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
// Parsing
console.log(parseInt('123.456')) // => 123
console.log(parseFloat('123')) // => 123
// Function
console.log(Math.floor('123')) // => 123
console.log(Math.round('123.456')) // => 123
console.log(Math.ceil('123.454')) // => 124
console.log(Number('123.123')) // => 123.123
// Unary
console.log(+'123') // => 123
console.log('002'-0) // => 2
console.log(1*'5') // => 5
console.log('7.7'*1) // => 7.7
console.log(3.3/1) // => 3.3
console.log('123.123'+0, typeof ('123.123'+0)) // => 123.1230 string
// Bitwise
console.log(~~'123') // => 123
console.log('0123'<<0) // => 123
console.log(~~'123.123') // => 123
console.log('123.123'<<0) // => 123
function parseIntSmarter(str) {
// ParseInt is bad because it returns 22 for "22thisendsintext"
// Number() is returns NaN if it ends in non-numbers, but it returns 0 for empty or whitespace strings.
return isNaN(Number(str)) ? NaN : parseInt(str, 10);
}
You can use plus.
For example:
var personAge = '24';
var personAge1 = (+personAge)
then you can see the new variable's type bytypeof personAge1 ; which is number.
Summing the multiplication of digits with their respective power of ten:
i.e: 123 = 100+20+3 = 1100 + 2+10 + 31 = 1*(10^2) + 2*(10^1) + 3*(10^0)
function atoi(array) {
// Use exp as (length - i), other option would be
// to reverse the array.
// Multiply a[i] * 10^(exp) and sum
let sum = 0;
for (let i = 0; i < array.length; i++) {
let exp = array.length - (i+1);
let value = array[i] * Math.pow(10, exp);
sum += value;
}
return sum;
}
The safest way to ensure you get a valid integer:
let integer = (parseInt(value, 10) || 0);
Examples:
// Example 1 - Invalid value:
let value = null;
let integer = (parseInt(value, 10) || 0);
// => integer = 0
// Example 2 - Valid value:
let value = "1230.42";
let integer = (parseInt(value, 10) || 0);
// => integer = 1230
// Example 3 - Invalid value:
let value = () => { return 412 };
let integer = (parseInt(value, 10) || 0);
// => integer = 0
Another option is to double XOR the value with itself:
var i = 12.34;
console.log('i = ' + i);
console.log('i ⊕ i ⊕ i = ' + (i ^ i ^ i));
This will output:
i = 12.34
i ⊕ i ⊕ i = 12
I only added one plus(+) before string and that was solution!
+"052254" // 52254
Number()
Number(" 200.12 ") // Returns 200.12
Number("200.12") // Returns 200.12
Number("200") // Returns 200
parseInt()
parseInt(" 200.12 ") // Return 200
parseInt("200.12") // Return 200
parseInt("200") // Return 200
parseInt("Text information") // Returns NaN
parseFloat()
It will return the first number
parseFloat("200 400") // Returns 200
parseFloat("200") // Returns 200
parseFloat("Text information") // Returns NaN
parseFloat("200.10") // Return 200.10
Math.floor()
Round a number to the nearest integer
Math.floor(" 200.12 ") // Return 200
Math.floor("200.12") // Return 200
Math.floor("200") // Return 200
function doSth(){
var a = document.getElementById('input').value;
document.getElementById('number').innerHTML = toNumber(a) + 1;
}
function toNumber(str){
return +str;
}
<input id="input" type="text">
<input onclick="doSth()" type="submit">
<span id="number"></span>
This (probably) isn't the best solution for parsing an integer, but if you need to "extract" one, for example:
"1a2b3c" === 123
"198some text2hello world!30" === 198230
// ...
this would work (only for integers):
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (!isNaN(str[i - 1])) {
result += parseInt(str[i - 1]) * factor
factor *= 10
}
}
return result
}
console.log(extractInteger(str))
Of course, this would also work for parsing an integer, but would be slower than other methods.
You could also parse integers with this method and return NaN if the string isn't a number, but I don't see why you'd want to since this relies on parseInt internally and parseInt is probably faster.
var str = '3a9b0c3d2e9f8g'
function extractInteger(str) {
var result = 0;
var factor = 1
for (var i = str.length; i > 0; i--) {
if (isNaN(str[i - 1])) return NaN
result += parseInt(str[i - 1]) * factor
factor *= 10
}
return result
}
console.log(extractInteger(str))