We Keep Coding

Single check box selection with jquery datatable

In jquery datatable, single check box should be selected.
This link is working fine.
But above link is using jquery.dataTables 1.10.16 version. And I am using jquery.dataTables 1.9.4.
Can the same functionality as listed in example given above be possible with jquery.dataTables 1.9.4 instead of jquery.dataTables 1.10.16?

In the same page which you give the link, there are many explanation about to using "single check" oparetion.
At the end of the listed attachment, you can see the referanced .js file is
https://cdn.datatables.net/select/1.2.5/js/dataTables.select.min.js
In your page, you should add this file referance after dataTable.js.
I think, the version of jquery is not important. The important file is "dataTables.select.js"!
Secondly, you must update your dataTable maker codes like the sample below;
$(document).ready(function() {
$('#example').DataTable( {
columnDefs: [ {
orderable: false,
className: 'select-checkbox',
targets: 0
} ],
select: {
style: 'os',
selector: 'td:first-child' // this line is the most importan!
},
order: [[ 1, 'asc' ]]
} );
} );
UPDATES :
Why dont you try to write your own selector function?
for example;
$(document).ready(function() {
$('#example').DataTable( {
/// put your options here...
} );
$('#example').find("tr").click(function(){ CheckTheRow(this); });
} );
function CheckTheRow(tr){
if($(tr).find("td:first").hasClass("selected")) return;
// get the pagination row count
var activePaginationSelected = $("#example_length").find("select").val();
// show all rows
$("#example_length").find("select").val(-1).trigger("change");
// remove the previous selection mark
$("#example").find("tr").each(function(i,a){
$(a).find("td:first").removeClass("selected");
$(a).find("td:first").html("");
});
// mark the picked row
$(tr).find("td:first").addClass("selected");
$(tr).find("td:first").html("<i class='fa fa-check'></i>");
// re turn the pagination to first stuation
$("#example_length").find("select")
.val(activePaginationSelected).trigger("change");
}

Unfortunately, legacy data table does not support or have that select extension.
Workaround:
Create checkbox element inside 'mRender' callback.
Bind action to the checkbox. (This can be done inside the fnRowCallback or outside as in my example in below fiddle
https://jsfiddle.net/Rohith_KP/dwcatt9n/1/
$(document).ready(function() {
var userData = [
["1", "Email", "Full Name", "Member"],
["2", "Email", "Full Name", "Member"]
];
var table = $('#example').DataTable({
'data': userData,
'columnDefs': [{
'targets': 0,
'className': 'dt-body-center',
'mRender': function(data, type, full, meta) {
return '<input type="checkbox" value="' + $('<div/>').text(data).html() + '">';
}
}],
'order': [1, 'asc']
});
$('#example tr').click(function() {
if ($(this).hasClass('row_selected'))
$(this).removeClass('row_selected');
else
$(this).addClass('row_selected');
});
});
Also, I suggest you to upgrade your datatable version. Then you can use that select extension.

Can the same functionality as listed in example given above be possible with jquery.dataTables 1.9.4 instead of jquery.dataTables 1.10.16?
Yes.
But, not using the Select Extension since it requires at least version 1.10.7.
For 1.9.4, a possible solution would be:
$(document).ready(function() {
$('#example').find("td input[type='checkbox']").click(function() {
selectRow(this);
});
var table = $('#example').DataTable();
function selectRow(clickedCheckBox) {
var currentPage = table.fnPagingInfo().iPage;
// Being unchecked
if (!$(clickedCheckBox).is(':checked')) {
$(clickedCheckBox).removeAttr('checked');
getRow(clickedCheckBox).removeClass('selected');
return;
}
var selectEntries = $("#example_length").find("select");
var showEntriesCount = selectEntries.val();
var totalRows = table.fnGetData().length;
// If show entries != totalRows append total rows opiton that can be selected
if (totalRows != showEntriesCount)
selectEntries.append($('<option>', {
value: totalRows,
text: totalRows
}));
// Display all rows
selectEntries.val(totalRows).trigger("change");
// Removes all checked attribute from all the rows
$("#example").find("td input[type='checkbox']").each(function(value, key) {
getRow(key).removeClass('selected');
$(key).removeAttr('checked');
});
// Check the clicked checkBox
$(clickedCheckBox).prop('checked', true);
getRow(clickedCheckBox).addClass('selected');
// Re set the show entries count
selectEntries.val(showEntriesCount).trigger("change");
// If added, Remove the additional option added to Show Entries
if (totalRows != showEntriesCount)
selectEntries.find("[value='" + totalRows + "']").remove();
// Go to the page on which the checkbox was clicked
table.fnPageChange(currentPage);
}
function getRow(element) {
return $(element).parent().parent();
}
});
The above will require fnPagingInfo to take the user back to initial page. I haven't tested the solution on large dataset, tested it on a table with 150 rows, but should work fine on larger datasets too.
JSFiddle

Have you tried below code and I checked and it is working fine, you need to update styles and scripts:
You havr to update the latest styles and scripts to achieve latest functionality.
Single check box selection with jquery datatable

How to show Total number of pages in YUI Paginator?

I am using YUI Paginator API for pagination and I need to show Total number of pages on screen. I saw that there is a function getTotalPages() in API but I am unsure about how to use it, there isn't enough documentation. Also after looking at some other documentation I tried using {totalPages} but didn't work.
Can somebody help me out in this issue? Thanks in advance!!
Below is the code snippet I am using. Please refer to template object from config:
config = {
rowsPerPage: 100,
template :
'<p class="klass">' +
'<label>Total pages: {totalPages}</label>'+
'<label>Page size: {RowsPerPageDropdown}</label>'+
'</p>',
rowsPerPageDropdownClass : "yui-pg-rpp-options",
rowsPerPageOptions : [
{ value : 100 , text : "100" },
{ value : 250 , text : "250" },
{ value : 500 , text : "500" },
{ value : 1000 , text : "1000" },
{ value : tstMap[tabName].length , text : "All" }
],
};
var myPaginator = new YAHOO.widget.Paginator(config);

The Paginator utility allows you to display an item or a group of items depending on the number of items you wish to display at one time.
Paginator's primary functionality is contained in paginator-core and is mixed into paginator to allow paginator to have extra functionality added to it while leaving the core functionality untouched. This allows paginator-core to remain available for use later on or used in isolation if it is the only piece you need.
Due to the vast number of interfaces a paginator could possibly consist of, Paginator does not contain any ready to use UIs. However, Paginator is ready to be used in any Based-based, module such as a Widget, by extending your desired class and mixing in Paginator. This is displayed in the following example:
YUI().use('paginator-url', 'widget', function (Y){
var MyPaginator = Y.Base.create('my-paginator', Y.Widget, [Y.Paginator], {
renderUI: function () {
var numbers = '',
i, numberOfPages = this.get('totalPages');
for (i = 1; i <= numberOfPages; i++) {
// use paginator-url's formatUrl method
numbers += '' + i + '';
}
this.get('boundingBox').append(numbers);
},
bindUI: function () {
this.get('boundingBox').delegate('click', function (e) {
// let's not go to the page, just update internally
e.preventDefault();
this.set('page', parseInt(e.currentTarget.getContent(), 10));
}, 'a', this);
this.after('pageChange', function (e) {
// mark the link selected when it's the page being displayed
var bb = this.get('boundingBox'),
activeClass = 'selected';
bb.all('a').removeClass(activeClass).item(e.newVal).addClass(activeClass);
});
}
});
var myPg = new MyPaginator({
totalItems: 100,
pageUrl: '?pg={page}'
});
myPg.render();
});

jQuery jTable pagination is not working properly

I'm using jquery jTable in my web-based project. Its pagination work fine when the number of rows less than 10,000. But when the number of rows exceeded from 10000, it causes an unfamiliar issue in its pagination. The pagination start skipping odd page numbering. You can see it in picture below:
My javaScript code for jTable is:
$("#AllProductTable").jtable({
paging: true,
pageSize: 10,
columnSelectable: false,
actions: {
listAction: '/ProductDefinition/Select'
},
fields: {
ProductId: { visibility: 'hidden', listClass: 'right-align' },
ProductCode: { title: 'Product Code' },
// more fields...
},
recordsLoaded: function (event, data) {
}
});
while my html tag for jTable is:
<div id="AllProductTable" style="width:400%;"></div>
I explored a lot\, but didn't find the solution related to it. I'm further unable to understand this miss behavior.

And at last, I got succeeded to solve this issue. I go through the jquery.jtable.js whole file and find something strange in one of its function. The function was;
_refreshGotoPageInput: function() {
// different logic statements
//...
//Skip some pages is there are too many pages
var pageStep = 1;
if (currentPageCount > 10000) { // if you having more than 10,000 pages
pageStep = 100;
} else if (currentPageCount > 5000) { // if you having more than 5000 pages
pageStep = 10;
} else if (currentPageCount > 2000) { // if you having more than 2000 pages
pageStep = 5;
} else if (currentPageCount > 1000) { // if you having more than 1000 pages
pageStep = 2;
}
//....
// Differnet logic statements
}
All you need is just to comment this portion of the above given function, or modify it according to your own implementation logic.
In my above mentioned case, my no_of_pages were increasing from 1000, that's why its taking 2-steps on changing page and so on.

Jquery - Add hyperlink to datatables

Using the DataTable plugin I am able to generate a table just fine but I want a custom hyperlink on one of the columns that links to another page but taking information from the rest of the row...for example in row 1 I want a hyperlink: http://url/?data['imdata'][i]['faultInst']["attributes"]["code"] or something like that. I've seen a lot of complicated examples from other forms but couldn't get it to work. Looking for the simplest solution as this is a side project and I need it to be completed.
$(document).ready(function(){
$.getJSON('/static/faults.json', function (data) {
var test = $('#table5').DataTable({
});
var tr;
for (var i = 0; i < data["totalCount"]; i++) {
test.row.add([
data['imdata'][i]['faultInst']["attributes"]["code"],
data['imdata'][i]['faultInst']["attributes"]["cause"],
data['imdata'][i]['faultInst']["attributes"]["descr"],
data['imdata'][i]['faultInst']["attributes"]["created"],
data['imdata'][i]['faultInst']["attributes"]["changeSet"],
data['imdata'][i]['faultInst']["attributes"]["childAction"],
data['imdata'][i]['faultInst']["attributes"]["dn"],
data['imdata'][i]['faultInst']["attributes"]["domain"],
data['imdata'][i]['faultInst']["attributes"]["highestSeverity"],
data['imdata'][i]['faultInst']["attributes"]["lastTransition"],
data['imdata'][i]['faultInst']["attributes"]["lc"],
data['imdata'][i]['faultInst']["attributes"]["occur"],
data['imdata'][i]['faultInst']["attributes"]["origSeverity"],
data['imdata'][i]['faultInst']["attributes"]["prevSeverity"],
data['imdata'][i]['faultInst']["attributes"]["rule"],
"test",
//data['imdata'][i]['faultInst']["attributes"]["Severity"],
data['imdata'][i]['faultInst']["attributes"]["subject"],
data['imdata'][i]['faultInst']["attributes"]["type"],
//data['imdata'][i]['faultInst']['attributes']["ack"]
"test",
"test"
])
}
test.draw();
});
});

When you have a setup like this, just avoid to define data, by that you get the proper value you can turn into a link. dataTables know which data it should pass to the render function by the targets value. Example :
var table = $('#example').DataTable({
columnDefs : [
{ targets : [0],
render : function(data) {
return '<a href="'+data+'" target_blank>'+data+'</a>'
}
}
]
})
table.row.add(['https://example.com', 'david', 'programmer']).draw()
demo -> http://jsfiddle.net/47k7nhkb/

how do i limit the number of tweets to one using jquery

i am trying to display just the most recent tweet on my home page i see a working example however it is not limited to one how do i make this return just one tweet?
example: http://jsfiddle.net/pborreli/pJgyu/
Thanks

If you change your code to -
$(function(){
$('#tweets').tweet({
count: 1,
username: "jquery"
});
});
And your external reference in jsfiddle to -
http://tweet.seaofclouds.com/jquery.tweet.js
Then it should work.
http://jsfiddle.net/zSLWt/1/

You can use another jquery twitter plugin
Steps:
Add a markup
<div id="twitter">
results will be here
</div>
Call plugin method like
<script type="text/javascript">
$(document).ready(function() {
$("#twitter").getTwitter({
userName: "jquery",
numTweets: 5,
loaderText: "Loading tweets...",
slideIn: true,
slideDuration: 750,
showHeading: true,
headingText: "Latest Tweets",
showProfileLink: true,
showTimestamp: true
});
});
</script>