I'm really novice to all of this, and I'm learning it in class. My assignment is to write an Else/If Loop where we display 1-100. If the integer is divisible by 3 display "play", if divisible by 4 display "ball", and if divisible by 3 and 4 display "Play Ball", anything else is just the integer.
I have my code working here, but I can't get my 3 and 4 to display "Play Ball", unless I run it by itself. Hope that makes sense, here's what I have:
for (var i = 1; i <= 100; i++) {
if (i % 3 === 0) {
console.log('Play');
} else if (i % 4 === 0) {
console.log('Ball');
} else if (i % 3 === 0 && i % 4 === 0) {
console.log('Play Ball');
} else {
console.log(i);
}
}
You just need to move thisi % 3 === 0 && i % 4 === 0 condition to the top:
for (var i = 1; i <= 100; i++) {
if (i % 3 === 0 && i % 4 === 0) {
console.log('Play Ball');
} else if (i % 3 === 0) {
console.log('Play');
} else if (i % 4 === 0) {
console.log('Ball');
} else {
console.log(i);
}
}
Since the first if statement will always be true when the third statement (with the &&) will be true, you'll never make it to the third statement. Try reordering as such:
for (var i = 1; i <= 100; i++) {
if (i % 3 === 0 && i % 4 === 0) {
console.log('Play Ball');
} else if (i % 4 === 0) {
console.log('Ball');
} else if (i % 3 === 0) {
console.log('Play');
} else {
console.log(i);
}
}
You can move the check for divisible by both 3 and 4 to the top:
for (var i = 1; i <= 100; i++) {
if (i % 3 === 0 && i % 4 === 0) {
console.log('Play Ball');
} else if (i % 3 === 0) {
console.log('Play');
} else if (i % 4 === 0) {
console.log('Ball');
} else {
console.log(i);
}
}
3 and 4 display
Above statement means, when BOTH condition satisfies then only you need to perform some task. In this scenario you need to use &&
if ( (i % 3 === 0) && (i % 4 === 0) ) {
console.log('Play Ball');
}
When to use else and/or else if
Let's take an example, you have a number, which is not divisible by 3 and 4 and you are not concern about that number. Then, you simply use else to fall all those category into it.
Now, there is another scenario, when you have entered number, which is again not divisible by 3 and 4. But, you might want see, if it is only divisible by 3 or 4. Then, you use else if where you can put the condition to check.
if ( (i % 3 === 0) && (i % 4 === 0) ) {
console.log('Play Ball');
}
else if ( i % 3 === 0) {
console.log('Play');
}
else if ( i % 4 === 0) {
console.log('Ball');
}
please I'm stuck in this question below since yesterday. Below is the question:
Write a program that uses console.log to print all the numbers from 1
to 100, with two exceptions. For numbers divisible by 3, print "Fizz"
instead of the number, and for numbers divisible by 5 (and not 3), print
"Buzz" instead.
When you have that working, modify your program to print "FizzBuzz",
for numbers that are divisible by both 3 and 5 (and still print "Fizz" or
"Buzz" for numbers divisible by only one of those).
I only got the first two conditions but not the the third. I don't know how to go about it anymore, I've tried many options. Below is my code:
<html>
<head/head>
<body>
<script type="text/javascript">
for (i = 1; i <= 100; i++)
if (i % 3 == 0) {
document.write("Fizz");
document.write("<br />");
} else if (i % 5 == 0 && i % 3 != 0) {
document.write("Buzz");
document.write("<br />");
} else if (i % 3 && 5 == 0 && i % 3 != 0 && i % 5 != 0) {
document.write("FizzBuzz");
document.write("<br />");
} else {
document.write(+i);
document.write("<br />");
}
</script>
</body>
</html>
Check the most specific (FizzBuzz) condition first.
function fizzBuzz() {
for(var i = 1; i <= 100; i++){
if(i % 5 === 0 && i % 3 === 0){
console.log('FizzBuzz');
} else if(i % 3 === 0){
console.log('Fizz');
} else if(i % 5 === 0){
console.log('Buzz');
} else {
console.log(i);
}
}
}
here is an updated version of your code, I keep it as you write it with some changes, I made it work without touch it's logic, you can see that the problem was in the first comparison and in the second "if else" (5 will never be equal to 0). you can optimize the code more than that, good luck.
<html>
<head/head>
<body>
<script type="text/javascript">
for (i = 1; i <= 100; i++)
if (i % 3 == 0 && i % 5 != 0) {
document.write("Fizz");
document.write("<br />");
} else if (i % 5 == 0 && i % 3 != 0) {
document.write("Buzz");
document.write("<br />");
} else if (i % 3 == 0 && i % 5 == 0) {
document.write("FizzBuzz");
document.write("<br />");
} else {
document.write(+i);
document.write("<br />");
}
</script>
</body>
</html>
Since everyone is contributing, I might as well give you an interesting solution:
var i = 101;
while(i --> 0){ // as i goes to 0... wat
var state = !!(i % 3) << 1 | !!(i % 5), // compute state?
output = ["FizzBuzz", "Fizz", "Buzz", i]; // hmm...
console.log(output[state]); // output correct string
}
1st - Instead of document.write use console.log like the question says
2nd - You have a syntax error in the head section. it should be <head></head>
3rd - for the 1st part of the question all you need is this:
for (i = 1; i <= 100; i++) {
// if i is divisible by 3
if (i % 3 == 0) {
console.log("Fizz");
}
// if i is divisible by 5 (no need to check for 3 again)
else if (i % 5 == 0) {
console.log("Buzz");
}
// else
else {
console.log(i);
}
}
4th - For the 2nd part you need to add an extra if on top of what you have already:
for (i = 1; i <= 100; i++) {
// if i is divisible by 3 and 5
if (i % 3 == 0 && i % 5 == 0) {
console.log("FizzBuzz");
}
// if i is divisible by 3
else if (i % 3 == 0) {
console.log("Fizz");
}
// if i is divisible by 5 (no need to check for 3 again)
else if (i % 5 == 0) {
console.log("Buzz");
}
// else
else {
console.log(i);
}
}
working fiddle: https://jsfiddle.net/tedmanowar/amapqcLL/
You can use a while loop, than use a nested if statements to check the conditions.
let number = 0;
while (number <= 100) {
if(number % 3 === 0 && number % 5 === 0){
console.log("FizzBuzz");
}else if(number % 3 === 0){
console.log("Fizz");
}else if(number % 5 === 0){
console.log("Buzz");
}else{
console.log(number);
}
number++;
}
This solution is the easiest and simplest. There are multiple ways to solve the question though.
for (n=1; n<=100; n++){
let output = "";
if(n % 3=== 0) output += "Fizz"
if(n % 5=== 0) output += "buzz"
console.log(output || n);
}
I don't recommend this answer - since it is very hard to maintain - but it does do it in very few lines. It also relies on the two numbers only having a common factor of 1.
for(let i=1; i<=100; i++) {
console.log(`${i%15?i%5?i%3?i:'Fizz':'Buzz':'FizzBuzz'}`)
}
This is using the ternary operator and backquote template strings.
You should just use a loop that starts at 1 and is less than 101 (so up to 100) and test for the %n === 0. In other words, make sure there is no remainder.
function startConsoleDemo(){
for(var i=1,r; i<101; i++){ // loop from 1 to 100
r = i; // default value of r
if(i % 3 === 0 && i % 5 === 0){ // if i/3 and 1/5 do not produce a remainder
r = 'FizzBuzz'; // reassign r
}
else if(i % 3 === 0){ // we knew i % 5 !== 0 so see if i/3 does not produce a remainder
r = 'Fizz'; // reassign r
}
else if(i % 5 === 0){ // we already knew i % 3 !== 0 - you know the drill
r = 'Buzz'; // reassign r
}
console.log(r); // console at each step of the loop no matter what
}
}
startConsoleDemo(); // without () you can use like a var then () later
I have a solution and I'm pretty sure it'll work for you.
for (let i = 1; i <= 100; i++) {
if (i % 3 === 0 && i % 5 === 0) {
document.write(`${i} FizzBuzz`);
} else if (i % 3 === 0 && i % 5 !== 0) {
document.write(`${i} Fizz`);
} else if (i % 5 === 0 && i % 3 !== 0) {
document.write(`${i} Buzz`);
} else {
document.write(`${i}`);
}
}
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 1 year ago.
Improve this question
Can someone please correct this code of mine for FizzBuzz? There seems to be a small mistake. This code below prints all the numbers instead of printing only numbers that are not divisible by 3 or 5.
Write a program that prints the numbers from 1 to 100. But for multiples of three, print "Fizz" instead of the number, and for the multiples of five, print "Buzz". For numbers which are multiples of both three and five, print "FizzBuzz".
function isDivisible(numa, num) {
if (numa % num == 0) {
return true;
} else {
return false;
}
};
function by3(num) {
if (isDivisible(num, 3)) {
console.log("Fizz");
} else {
return false;
}
};
function by5(num) {
if (isDivisible(num, 5)) {
console.log("Buzz");
} else {
return false;
}
};
for (var a=1; a<=100; a++) {
if (by3(a)) {
by3(a);
if (by5(a)) {
by5(a);
console.log("\n");
} else {
console.log("\n");
}
} else if (by5(a)) {
by5(a);
console.log("\n");
} else {
console.log(a+"\n")
}
}
for (let i = 1; i <= 100; i++) {
let out = '';
if (i % 3 === 0) out += 'Fizz';
if (i % 5 === 0) out += 'Buzz';
console.log(out || i);
}
/*Write a program that prints the numbers from 1 to 100. But for multiples of three print “Fizz” instead of the number and for the multiples of five print “Buzz”. For numbers which are multiples of both three and five print “FizzBuzz”*/
var str="",x,y,a;
for (a=1;a<=100;a++)
{
x = a%3 ==0;
y = a%5 ==0;
if(x)
{
str+="fizz"
}
if (y)
{
str+="buzz"
}
if (!(x||y))
{
str+=a;
}
str+="\n"
}
console.log(str);
Your functions return falsy values no matter what, but will print anyway. No need to make this overly complicated.
fiddle: http://jsfiddle.net/ben336/7c9KN/
Was fooling around with FizzBuzz and JavaScript as comparison to C#.
Here's my version, heavily influenced by more rigid languages:
function FizzBuzz(aTarget) {
for (var i = 1; i <= aTarget; i++) {
var result = "";
if (i%3 === 0) result += "Fizz";
if (i%5 === 0) result += "Buzz";
if (result.length ===0) result = i;
console.log(result);
}
}
I like the structure and ease of read.
Now, what Trevor Dixon cleverly did is relay on the false-y values of the language (false , null , undefined , '' (the empty string) , 0 and NaN (Not a Number)) to shorten the code.
Now, the if (result.length ===0) result = i; line is redundant and the code will look like:
function FizzBuzz(aTarget) {
for (var i = 1; i <= aTarget; i++) {
var result = "";
if (i%3 === 0) result += "Fizz";
if (i%5 === 0) result += "Buzz";
console.log(result || i);
}
}
Here we relay on the || operator to say : "if result is false, print the iteration value (i)". Cool trick, and I guess I need to play more with JavaScript in order to assimilate this logic.
You can see other examples (from GitHub) that will range from things like :
for (var i=1; i <= 20; i++)
{
if (i % 15 == 0)
console.log("FizzBuzz");
else if (i % 3 == 0)
console.log("Fizz");
else if (i % 5 == 0)
console.log("Buzz");
else
console.log(i);
}
No variables here, and just check for division by 15,3 & 5 (my above one only divides by 3 & 5, but has an extra variable, so I guess it's down to microbenchmarking for those who care, or style preferences).
To:
for(i=0;i<100;)console.log((++i%3?'':'Fizz')+(i%5?'':'Buzz')||i)
Which does it all in on line, relaying on the fact that 0 is a false value, so you can use that for the if-else shorthanded version (? :), in addition to the || trick we've seen before.
Here's a more readable version of the above, with some variables:
for (var i = 1; i <= 100; i++) {
var f = i % 3 == 0, b = i % 5 == 0;
console.log(f ? b ? "FizzBuzz" : "Fizz" : b ? "Buzz" : i);
}
All in all, you can do it in different ways, and I hope you picked up some nifty tips for use in JavaScript :)
.fizz and .buzz could be CSS classes, no? In which case:
var n = 0;
var b = document.querySelector("output");
window.setInterval(function () {
n++;
b.classList[n%3 ? "remove" : "add"]("fizz");
b.classList[n%5 ? "remove" : "add"]("buzz");
b.textContent = n;
}, 500);
output.fizz:after {
content: " fizz";
color:red;
}
output.buzz:after {
content: " buzz";
color:blue;
}
output.fizz.buzz:after {
content: " fizzbuzz";
color:magenta;
}
<output>0</output>
With ternary operator it is much simple:
for (var i = 0; i <= 100; i++) {
str = (i % 5 == 0 && i % 3 == 0) ? "FizzBuzz" : (i % 3 == 0 ? "Fizz" : (i % 5 == 0) ? "Buzz" : i);
console.log(str);
}
for(i = 1; i < 101; i++) {
if(i % 3 === 0) {
if(i % 5 === 0) {
console.log("FizzBuzz");
}
else {
console.log("Fizz");
}
}
else if(i % 5 === 0) {
console.log("Buzz");
}
else {
console.log(i)
}
}
In your by3 and by5 functions, you implicitly return undefined if it is applicable and false if it's not applicable, but your if statement is testing as if it returned true or false. Return true explicitly if it is applicable so your if statement picks it up.
As an ES6 generator: http://www.es6fiddle.net/i9lhnt2v/
function* FizzBuzz() {
let index = 0;
while (true) {
let value = ''; index++;
if (index % 3 === 0) value += 'Fizz';
if (index % 5 === 0) value += 'Buzz';
yield value || index;
}
}
let fb = FizzBuzz();
for (let index = 0; index < 100; index++) {
console.log(fb.next().value);
}
Codeacademy sprang a FizzBuzz on me tonight. I had a vague memory that it was "a thing" so I did this. Not the best way, perhaps, but different from the above:
var data = {
Fizz:3,
Buzz:5
};
for (var i=1;i<=100;i++) {
var value = '';
for (var k in data) {
value += i%data[k]?'':k;
}
console.log(value?value:i);
}
It relies on data rather than code. I think that if there is an advantage to this approach, it is that you can go FizzBuzzBing 3 5 7 or further without adding additional logic, provided that you assign the object elements in the order your rules specify. For example:
var data = {
Fizz:3,
Buzz:5,
Bing:7,
Boom:11,
Zing:13
};
for (var i=1;i<=1000;i++) {
var value = '';
for (var k in data) {
value += i%data[k]?'':k;
}
console.log(value?value:i);
}
This is what I wrote:
for (var num = 1; num<101; num = num + 1) {
if (num % 5 == 0 && num % 3 == 0) {
console.log("FizzBuzz");
}
else if (num % 5 == 0) {
console.log("Buzz");
}
else if (num % 3 == 0) {
console.log("Fizz");
}
else {
console.log(num);
}
}
for (var i = 1; i <= 100; i++) {
if (i % 3 === 0 && i % 5 === 0) console.log("FizzBuzz");
else if (i%3 === 0) console.log("Fizz");
else if (i%5 === 0) console.log("Buzz");
else console.log(i);
}
One of the easiest way to FizzBuzz.
Multiple of 3 and 5, at the same time, means multiple of 15.
Second version:
for (var i = 1; i <= 100; i++) {
if (i % 15 === 0) console.log("FizzBuzz");
else if (i%3 === 0) console.log("Fizz");
else if (i%5 === 0) console.log("Buzz");
else console.log(i);
}
In case someone is looking for other solutions: This one is a pure, recursive, and reusable function with optionally customizable parameter values:
const fizzBuzz = (from = 1, till = 100, ruleMap = {
3: "Fizz",
5: "Buzz",
}) => from > till || console.log(
Object.keys(ruleMap)
.filter(number => from % number === 0)
.map(number => ruleMap[number]).join("") || from
) || fizzBuzz(from + 1, till, ruleMap);
// Usage:
fizzBuzz(/*Default values*/);
The from > till is the anchor to break the recursion. Since it returns false until from is higher than till, it goes to the next statement (console.log):
Object.keys returns an array of object properties in the given ruleMap which are 3 and 5 by default in our case.
Then, it iterates through the numbers and returns only those which are divisible by the from (0 as rest).
Then, it iterates through the filtered numbers and outputs the saying according to the rule.
If, however, the filter method returned an empty array ([], no results found), it outputs just the current from value because the join method at the end finally returns just an empty string ("") which is a falsy value.
Since console.log always returns undefined, it goes to the next statement and calls itself again incrementing the from value by 1.
A Functional version of FizzBuzz
const dot = (a,b) => x => a(b(x));
const id = x => x;
function fizzbuzz(n){
const f = (N, m) => n % N ? id : x => _ => m + x('');
return dot(f(3, 'fizz'), f(5, 'buzz')) (id) (n);
}
for more options in the above replace dot with dots as below
const dots = (...a) => f0 => a.reduceRight((acc, f) => f(acc), f0);
function fizzbuzz(n){
const f = (N, m) => n % N ? id : x => _ => m + x('');
return dots(f(3, 'fizz'), f(5, 'buzz'), f(7, 'bam')) (id) (n);
}
Reference: FizzBuzz in Haskell by Embedding a Domain-Specific Language
by Maciej Piro ́g
for (i=1; i<=100; i++) {
output = "";
if (i%5==0) output = "buzz";
if (i%3==0) output = "fizz" + output;
if (output=="") output = i;
console.log(output);
}
Functional style! JSBin Demo
// create a iterable array with a length of 100
// and map every value to a random number from 1 to a 100
var series = Array.apply(null, Array(100)).map(function() {
return Math.round(Math.random() * 100) + 1;
});
// define the fizzbuzz function which takes an interger as input
// it evaluates the case expressions similar to Haskell's guards
var fizzbuzz = function (item) {
switch (true) {
case item % 15 === 0:
console.log('fizzbuzz');
break;
case item % 3 === 0:
console.log('fizz');
break;
case item % 5 === 0:
console.log('buzz');
break;
default:
console.log(item);
break;
}
};
// map the series values to the fizzbuzz function
series.map(fizzbuzz);
Another solution, avoiding excess divisions and eliminating excess spaces between "Fizz" and "Buzz":
var num = 1;
var FIZZ = 3; // why not make this easily modded?
var BUZZ = 5; // ditto
var UPTO = 100; // ditto
// and easily extended to other effervescent sounds
while (num < UPTO)
{
var flag = false;
if (num % FIZZ == 0) { document.write ("Fizz"); flag = true; }
if (num % BUZZ == 0) { document.write ("Buzz"); flag = true; }
if (flag == false) { document.write (num); }
document.write ("<br>");
num += 1;
}
If you're using using jscript/jsc/.net, use Console.Write(). If you're using using Node.js, use process.stdout.write(). Unfortunately, console.log() appends newlines and ignores backspaces, so it's unusable for this purpose. You could also probably append to a string and print it. (I'm a complete n00b, but I think (ok, hope) I've been reasonably thorough.)
"Whaddya think, sirs?"
check this out!
function fizzBuzz(){
for(var i=1; i<=100; i++){
if(i % 3 ===0 && i % 5===0){
console.log(i+' fizzBuzz');
} else if(i % 3 ===0){
console.log(i+' fizz');
} else if(i % 5 ===0){
console.log(i+' buzz');
} else {
console.log(i);
}
}
}fizzBuzz();
Slightly different implementation.
You can put your own argument into the function. Can be non-sequential numbers like [0, 3, 10, 1, 4]. The default set is only from 1-15.
function fizzbuzz (set) {
var set = set ? set : [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
var isValidSet = set.map((element) => {if (typeof element !== 'number') {return false} else return true}).indexOf(false) === -1 ? true : false
var gotFizz = (n) => {if (n % 3 === 0) {return true} else return false}
var gotBuzz = (n) => {if (n % 5 === 0) {return true} else return false}
if (!Array.isArray(set)) return new Error('First argument must an array with "Number" elements')
if (!isValidSet) return new Error('The elements of the first argument must all be "Numbers"')
set.forEach((n) => {
if (gotFizz(n) && gotBuzz(n)) return console.log('fizzbuzz')
if (gotFizz(n)) return console.log('fizz')
if (gotBuzz(n)) return console.log('buzz')
else return console.log(n)
})
}
var num = [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20];
var runLoop = function() {
for (var i = 1; i<=num.length; i++) {
if (i % 5 === 0 && i % 3 === 0) {
console.log("FizzBuzz");
}
else if (i % 5 === 0) {
console.log("Buzz");
}
else if (i % 3 === 0) {
console.log("Fizz");
}
else {
console.log(i);
}
}
};
runLoop();
Just want to share my way to solve this
for (i = 1; i <= 100; i++){
if (i % 3 === 0 && i % 5 === 0) {
console.log('fizzBuzz');
} else if (i % 3 === 0) {
console.log('fizz');
} else if (i % 5 === 0){
console.log('buzz');
} else {
console.log(i);
}
}
var limit = prompt("Enter the number limit");
var n = parseInt(limit);
var series = 0;
for(i=1;i<n;i++){
series = series+" " +check();
}
function check() {
var result;
if (i%3==0 && i%5==0) { // check whether the number is divisible by both 3 and 5
result = "fizzbuzz "; // if so, return fizzbuzz
return result;
}
else if (i%3==0) { // check whether the number is divisible by 3
result = "fizz "; // if so, return fizz
return result;
}
else if (i%5==0) { // check whether the number is divisible by 5
result = "buzz "; // if so, return buzz
return result;
}
else return i; // if all the above conditions fail, then return the number as it is
}
alert(series);
Thats How i did it :
Not the best code but that did the trick
var numbers = [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20];
for(var i = 0 ; i <= 19 ; i++){
var fizz = numbers[i] % 3 === 0;
var buzz = numbers[i] % 5 === 0;
var fizzBuzz = numbers[i] % 5 === 0 && numbers[i] % 3 === 0;
if(fizzBuzz){
console.log("FizzBuzz");
} else if(fizz){
console.log("Fizz");
} else if(buzz){
console.log("Buzz");
} else {
console.log(numbers[i]);
}
}
As much as this is easy logic it can be a daunting task for beginners. Below is my solution to the FizzBuzz problem:
let i = 1;
while(i<=100){
if(i % 3 ==0 && i % 5 == 0){
console.log('FizzBuzz');
}
else if(i % 3 == 0){
console.log('Fizz');
}
else if(i % 5 == 0){
console.log('Buzz');
}
else{
console.log(i);
}
i++;
}
considering performance and readability, please find my take on this problem
way 1: instead of doing a math modules operation in an if loop, which results in performing 3 times taking it a step above reduces the overhead
function fizzBuzz(n) {
let count =0;
let x = 0;
let y = 0;
while(n!==count)
{
count++;
x = count%3;
y = count%5;
if(x === 0 && y ===0)
{
console.log("fizzbuzz");
}
else if(x === 0)
{
console.log("fizz");
}
else if(y === 0)
{
console.log("buzz");
}
else
{
console.log(count);
}
}
}
fizzBuzz(15);
way 2: condensing the solution
function fizzBuzz(n) {
let x = 0;
let y = 0;
for (var i = 1; i <= n; i++) {
var result = "";
x = i%3;
y = i%5;
if (x === 0 && y === 0) result += "fizzbuzz";
else if (x === 0) result += "fizz";
else if (y === 0) result += "buzz";
console.log(result || i);
}
}
fizzBuzz(5)
Here's my favorite solution. Succinct, functional & fast.
const oneToOneHundred = Array.from({ length: 100 }, (_, i) => i + 1);
const fizzBuzz = (n) => {
if (n % 15 === 0) return 'FizzBuzz';
if (n % 3 === 0) return 'Fizz';
if (n % 5 === 0) return 'Buzz';
return n;
};
console.log(oneToOneHundred.map((i) => fizzBuzz(i)).join('\n'));
function fizzBuzz(n) {
for (let i = 1; i < n + 1; i++) {
if (i % 15 == 0) {
console.log("fizzbuzz");
} else if (i % 3 == 0) {
console.log("fizz");
} else if (i % 5 == 0) {
console.log("buzz");
} else {
console.log(i);
}
}
}
fizzBuzz(15);
Different functional style -- naive
fbRule = function(x,y,f,b,z){return function(z){return (z % (x*y) == 0 ? f+b: (z % x == 0 ? f : (z % y == 0 ? b: z))) }}
range = function(n){return Array.apply(null, Array(n)).map(function (_, i) {return i+1;});}
range(100).map(fbRule(3,5, "fizz", "buzz"))
or, to incorporate structures as in above example: ie [[3, "fizz"],[5, "buzz"], ...]
fbRule = function(fbArr,z){
return function(z){
var ed = fbArr.reduce(function(sum, unit){return z%unit[0] === 0 ? sum.concat(unit[1]) : sum }, [] )
return ed.length>0 ? ed.join("") : z
}
}
range = function(n){return Array.apply(null, Array(n)).map(function (_, i) {return i+1;});}
range(100).map(fbRule([[3, "fizz"],[5, "buzz"]]))
OR, use ramda [from https://codereview.stackexchange.com/questions/108449/fizzbuzz-in-javascript-using-ramda ]
var divisibleBy = R.curry(R.compose(R.equals(0), R.flip(R.modulo)))
var fizzbuzz = R.map(R.cond([
[R.both(divisibleBy(3), divisibleBy(5)), R.always('FizzBuzz')],
[divisibleBy(3), R.aklways('Fizz')],
[divisibleBy(5), R.always('Buzz')],
[R.T, R.identity]
]));
console.log(fizzbuzz(R.range(1,101)))