I have an application, with fabricjs. It works with the zoom of the mousewheel, when I do mousewheel up, my canvas save the state, like as if I do mousewheel down.
I have a state in the canvas when I put the mouse over on an object.
When you are hovering an object and do zoom-in and zoom-out, the state of the canvas is saved with the hover state. I don't want this to happen. How I can prevent this?
//click on the rect to see that the color red is saved in the json
//shown in the console log, but i want the original State, the red fill
canvas.on("mouse:over", function(event){
if("target" in event){
color = event.target.fill;
event.target.fill="red";
canvas.renderAll();
}
});
canvas.on("mouse:out", function(event){
if("target" in event){
event.target.fill=color;
canvas.renderAll();
}
});
var rect = new fabric.Rect({
left: 100,
top: 100,
fill: 'blue',
width: 20,
height: 20,
angle: 45
});
canvas.add(rect);
You can check the fiddle at:
https://jsfiddle.net/samael205/xtcmokuy/9/
There is no way to just ignore the hover state. You can save the color in some other field and pass that field in to the toObject() call and the reset it after the export.
var canvas = new fabric.Canvas('canvas', {
perPixelTargetFind: true
});
canvas.on("mouse:down", function(event) {
var state = canvas.toObject(['trueColor']);
state.objects.forEach(o => {
if (o.trueColor) {
o.fill = o.trueColor;
}
})
console.log(state);
});
//click on the rect to see that the color red is saved in the json
//shown in the console log, but i want the original State, the red fill
canvas.on("mouse:over", function(event) {
if (event.target) {
event.target.trueColor = event.target.fill;
event.target.fill = "red";
canvas.renderAll();
}
});
canvas.on("mouse:out", function(event) {
if (event.target) {
event.target.fill = event.target.trueColor;
canvas.renderAll();
}
});
var rect = new fabric.Rect({
left: 100,
top: 100,
fill: 'blue',
width: 20,
height: 20,
angle: 45
});
canvas.add(rect);
<script src="https://cdnjs.cloudflare.com/ajax/libs/fabric.js/1.6.6/fabric.min.js"></script>
<canvas id="canvas"></canvas>
Related
I need a circle, which gets bigger every second. If I click the circle, it should disappear.
Ok so I added an animation and a mousedown function. But at the end of the animation the mousedown function does not work.
The circle is not recognized any more and is null until the animation finishes.
Any suggestions?
MyCode:
let canvas = new fabric.Canvas('c');
var temp = new fabric.Circle({
left: 0,
top: 0,
fill: 'red',
radius: 20
});
temp.on('mousedown', function(e){
console.log("clicked");
});
temp.selectable = false;
canvas.add(temp);
function animate(c){
c.animate('radius', '80',{
duration: 6000,
onChange: canvas.renderAll.bind(canvas)
});
}
animate(temp);
You need to call object#setCoords. in onChange handler.
DEMO
let canvas = new fabric.Canvas('c');
var temp = new fabric.Circle({
left: 0,
top: 0,
fill: 'red',
radius: 20,
selectable: false
});
temp.on('mousedown', function(e) {
console.log("clicked");
canvas.remove(temp);
temp.isRemoved = true;
});
canvas.add(temp);
function animate(c) {
c.animate('radius', '80', {
duration: 6000,
onChange: function() {
c.setCoords();
canvas.requestRenderAll();
},
abort: function() {
return c.isRemoved;
}
});
}
animate(temp);
canvas {
border: 1px solid #999;
}
<script src="http://cdnjs.cloudflare.com/ajax/libs/fabric.js/3.0.0/fabric.js"></script>
<canvas id='c' width=300 height=200></canvas>
<div id='result'></div>
<div id='result2'>
</div>
I am having trouble flipping or mirroring the object horizontally when the object itself is clicked on the FabricJS canvas.
I came close but it was mirroring the object when it was being resized too, which I didn't want.
I would guess I need to add the 'flipX: true' attribute to object on the first click and on the next click remove that attribute and so on with each click. Or maybe that is over complicating it and it can be done much easier with a flipX function I do not know.
I did find a Fiddle that flipped the object, but it was onclick of a button not the object itself.
I am struggling to solve this :\
My Fiddle
HTML:
<canvas id="canvas" width="400" height="300"></canvas>
JS:
var canvas = this.__canvas = new fabric.Canvas('canvas');
canvas.on('object:selected', function() {
toggle('flipX');
});
// create a rectangle
var rect = new fabric.Rect({
left: 50,
top: 50,
width: 100,
height: 50,
angle: 20,
fill: 'red'
});
canvas.add(rect);
canvas.renderAll();
You could accomplish that in the following way ...
var canvas = this.__canvas = new fabric.Canvas('canvas');
// mouse event
canvas.on('mouse:down', function(e) {
if (e.target) {
if (!e.target.__corner) {
e.target.toggle('flipX');
canvas.renderAll();
}
e.target.__corner = null;
}
});
// create a rectangle
var rect = new fabric.Rect({
left: 50,
top: 50,
width: 100,
height: 50,
angle: 20,
});
// set gradient (for demonstration)
rect.setGradient('fill', {
type: 'linear',
x1: -rect.width / 2,
y1: 0,
x2: rect.width / 2,
y2: 0,
colorStops: {
0: '#ffe47b',
1: 'rgb(111,154,211)'
}
});
canvas.add(rect);
rect.set('flipX', true);
canvas.renderAll();
body{margin:10px 0 0 0;overflow:hidden}canvas{border:1px solid #ccc}
<script src="http://cdnjs.cloudflare.com/ajax/libs/fabric.js/1.4.0/fabric.min.js"></script>
<canvas id="canvas" width="208" height="208"></canvas>
Same from above, different case.
Apply flip to background image
fabric.Image.fromURL('../' +ImageUrl, function (img02) {
Backcanvas.setBackgroundImage(img02, Backcanvas.renderAll.bind(Backcanvas), {
backgroundImageStretch: false,
top: 0,
left: 0,
originX: 'left',
originY: 'top',
flipY:'true'
});
Backcanvas.renderAll();
Backcanvas.backgroundImage.setCoords();
canvas.renderAll();
Backcanvas.renderAll();
}, { crossOrigin: 'anonymous' });
I'm trying to develop a way to select objects that are layered below and (totally) covered by other objects. One idea is to select the top object and then via doubleclick walk downwards through the layers. This is what I got at the moment:
var canvas = new fabric.Canvas("c");
fabric.util.addListener(canvas.upperCanvasEl, "dblclick", function (e) {
var _canvas = canvas;
var _mouse = _canvas.getPointer(e);
var _active = _canvas.getActiveObject();
if (e.target) {
var _targets = _canvas.getObjects().filter(function (_obj) {
return _obj.containsPoint(_mouse);
});
//console.warn(_targets);
for (var _i=0, _max=_targets.length; _i<_max; _i+=1) {
//check if target is currently active
if (_targets[_i] == _active) {
//then select the one on the layer below
_targets[_i-1] && _canvas.setActiveObject(_targets[_i-1]);
break;
}
}
}
});
canvas
.add(new fabric.Rect({
top: 25,
left: 25,
width: 100,
height: 100,
fill: "red"
}))
.add(new fabric.Rect({
top: 50,
left: 50,
width: 100,
height: 100,
fill: "green"
}))
.add(new fabric.Rect({
top: 75,
left: 75,
width: 100,
height: 100,
fill: "blue"
}))
.renderAll();
canvas {
border: 1px solid;
}
<script src="https://cdnjs.cloudflare.com/ajax/libs/fabric.js/1.6.3/fabric.min.js"></script>
<canvas id="c" width="300" height="200"></canvas>
As you can see, trying to select the red rectangle from within the blue one is not working. I'm only able to select the green or the blue. I guess that after the first doubleclick worked (green is selected), clicking again just selects blue so the following doubleclick is only able to get green again.
Is there a way around this? Any other ideas?
After some time I finally was able to solve that by myself. Clicking on an object brings it to the top. On double-clicking I try to get the object one layer behind the current object. On another dblclick I get the one behind and so on. Works great for me and also allows for the selection of fully covered objects without the need to move others.
var canvas = new fabric.Canvas("c");
canvas.on("object:selected", function (e) {
if (e.target) {
e.target.bringToFront();
this.renderAll();
}
});
var _prevActive = 0;
var _layer = 0;
//
fabric.util.addListener(canvas.upperCanvasEl, "dblclick", function (e) {
var _canvas = canvas;
//current mouse position
var _mouse = _canvas.getPointer(e);
//active object (that has been selected on click)
var _active = _canvas.getActiveObject();
//possible dblclick targets (objects that share mousepointer)
var _targets = _canvas.getObjects().filter(function (_obj) {
return _obj.containsPoint(_mouse) && !_canvas.isTargetTransparent(_obj, _mouse.x, _mouse.y);
});
_canvas.deactivateAll();
//new top layer target
if (_prevActive !== _active) {
//try to go one layer below current target
_layer = Math.max(_targets.length-2, 0);
}
//top layer target is same as before
else {
//try to go one more layer down
_layer = --_layer < 0 ? Math.max(_targets.length-2, 0) : _layer;
}
//get obj on current layer
var _obj = _targets[_layer];
if (_obj) {
_prevActive = _obj;
_obj.bringToFront();
_canvas.setActiveObject(_obj).renderAll();
}
});
//create something to play with
canvas
//fully covered rect is selectable with dblclicks
.add(new fabric.Rect({
top: 75,
left: 75,
width: 50,
height: 50,
fill: "black",
stroke: "black",
globalCompositeOperation: "xor",
perPixelTargetFind: true
}))
.add(new fabric.Circle({
top: 25,
left: 25,
radius: 50,
fill: "rgba(255,0,0,.5)",
stroke: "black",
perPixelTargetFind: true
}))
.add(new fabric.Circle({
top: 50,
left: 50,
radius: 50,
fill: "rgba(0,255,0,.5)",
stroke: "black",
perPixelTargetFind: true
}))
.add(new fabric.Circle({
top: 75,
left: 75,
radius: 50,
fill: "rgba(0,0,255,.5)",
stroke: "black",
perPixelTargetFind: true
}))
.renderAll();
canvas {
border: 1px solid;
}
<script src="https://cdnjs.cloudflare.com/ajax/libs/fabric.js/1.6.4/fabric.min.js"></script>
<canvas id="c" width="300" height="200"></canvas>
Just add one property during adding object to the canvas.
perPixelTargetFind: true
My task is a bit different - the mission is to pick the overlapping obj behind the current one:
[Left-click]+[Cmd-Key] on an selected-object to pick the first overlapping object which is right behind it.
If no overlapping objs are found, restart the search from top-layer
The idea is, for each click-event, intercept the selected object and replace it with our desired object.
A Fabric mouse-down event is like this:
User clicks on canvas
On canvas: find the target-obj by the coordinates of mouse cursor and stores it in the instance-variable (canvas._target)
Run event-handlers for mouse:down:before
Compare the target-obj found from step(2) with current selected object, fire selection:cleared/update/create events according to the results of comparison.
Set new activeObject(s)
Run event-handlers for mouse:down
We can use a customized event handler on mouse:down:before to intercept the target-obj found on Step(2) and replace it by our desired-object
fCanvas = new fabric.Canvas('my-canvas', {
backgroundColor: '#cbf1f1',
width: 800,
height: 600,
preserveObjectStacking: true
})
const r1 = new fabric.Rect({ width: 200, height: 200, stroke: null, top: 0, left: 0, fill:'red'})
const r2 = new fabric.Rect({ width: 200, height: 200, stroke: null, top: 50, left: 50, fill:'green'})
const r3 = new fabric.Rect({ width: 200, height: 200, stroke: null, top: 100, left: 100, fill:'yellow'})
fCanvas.add(r1, r2, r3)
fCanvas.requestRenderAll()
fCanvas.on('mouse:down:before', ev => {
if (!ev.e.metaKey) {
return
}
// Prevent conflicts with multi-selection
if (ev.e[fCanvas.altSelectionKey]) {
return
}
const currActiveObj = fCanvas.getActiveObject()
if (!currActiveObj) {
return
}
const pointer = fCanvas.getPointer(ev, true)
const hitObj = fCanvas._searchPossibleTargets([currActiveObj], pointer)
if (!hitObj) {
return
}
let excludeObjs = []
if (currActiveObj instanceof fabric.Group) {
currActiveObj._objects.forEach(x => { excludeObjs.push(x) })
} else {
// Target is single active object
excludeObjs.push(currActiveObj)
}
let remain = excludeObjs.length
let objsToSearch = []
let lastIdx = -1
const canvasObjs = fCanvas._objects
for (let i = canvasObjs.length-1; i >=0 ; i--) {
if (remain === 0) {
lastIdx = i
break
}
const obj = canvasObjs[i]
if (excludeObjs.includes(obj)) {
remain -= 1
} else {
objsToSearch.push(obj)
}
}
const headObjs = canvasObjs.slice(0, lastIdx+1)
objsToSearch = objsToSearch.reverse().concat(headObjs)
const found = fCanvas._searchPossibleTargets(objsToSearch, pointer)
if (found) {
fCanvas._target = found
}
})
<script src="https://cdnjs.cloudflare.com/ajax/libs/fabric.js/4.3.1/fabric.min.js"></script>
<html>
<h4>Left-click + Cmd-key on overlapping area to pick the obj which is behind current one</h4>
<canvas id="my-canvas"></canvas>
</html>
How do I use Fabric.js’s canvas.clear if I only want a certain element to be cleared? My intention is to clear the background once the “delete” button is pressed, but the font to remain. How do I achieve that? They both are added onto the canvas, so if I use canvas.clear they both are removed.
Do I have to use two canvases?
JSFiddle Demo
var canvas = new fabric.Canvas('canvas');
var textObj1 = new fabric.Text('font test', {
left: 100,
top: 350,
fontSize: 30,
fill: "#FF0000" // Set text color to red
});
canvas.add(textObj1);
fabric.Image.fromURL('http://s17.postimg.org/4740ku7z3/i_Stock_000000284123_XSmall.jpg', function(oImg) {
// scale image down, and flip it, before adding it onto canvas
oImg.scale(1);
oImg.selectable = false;
canvas.add(oImg);
});
function deleteimg() {
canvas.clear();
};
<canvas id="canvas" width="800" height="450" style="border:1px solid #000000"></canvas>
<button class="button-big" onclick="deleteimg()">delete</button>
You must repaint everything except the background:
function draw( background ) {
var canvas = new fabric.Canvas( 'canvas' );
canvas.clear();
var textObj1 = new fabric.Text('font test', {
left: 100,
top: 350,
fontSize: 30,
fill: "#FF0000" // Set text color to red
});
canvas.add(textObj1);
if ( background ) {
fabric.Image.fromURL( 'http://s17.postimg.org/4740ku7z3/i_Stock_000000284123_XSmall.jpg', function (oImg) {
// scale image down, and flip it, before adding it onto canvas
oImg.scale(1);
oImg.selectable = false;
canvas.add(oImg);
} );
}
}
// Call function with background
draw( true );
function deleteimg(){
// Call function without background
draw( false );
};
http://jsfiddle.net/o6a2uot4/
The Problem
I want to do this with an image instead of a canvas object. Meaning you have to add the thing you want to add TO AND AS A PART of the canvas before you can add it. The images are actually part of the website so it doesn't need to do some intricate stuff. This code I found here only works for when it's an object not an actual element. And by the way I'm using FabricJS just to let you know that I'm not using the default HTML5 canvas stuff.
As for any alternatives that are possibly going to work without using my current code. Please do post it down below in the comments or in the answers. I would really love to see what you guys got in mind.
Summary
Basically I want to be able to drag and drop images through the canvas while retaining the mouse cursor position. For example if I drag and image and the cursor was at x: 50 y: 75 it would drop the image to that exact spot. Just like what the code I found does. But like the problem stated the CODE uses an object for you to drag it to the canvas then it clones it. I want this functionality using just plain old elements. E.g: <img>.
THE CODE -
JsFiddle
window.canvas = new fabric.Canvas('fabriccanvas');
var edgedetection = 8; //pixels to snap
canvas.selection = false;
window.addEventListener('resize', resizeCanvas, false);
function resizeCanvas() {
canvas.setHeight(window.innerHeight);
canvas.setWidth(window.innerWidth);
canvas.renderAll();
}
// resize on init
resizeCanvas();
//Initialize Everything
init();
function init(top, left, width, height, fill) {
var bg = new fabric.Rect({
left: 0,
top: 0,
fill: "#eee",
width: window.innerWidth,
height: 75,
lockRotation: true,
maxHeight: document.getElementById("fabriccanvas").height,
maxWidth: document.getElementById("fabriccanvas").width,
selectable: false,
});
var squareBtn = new fabric.Rect({
top: 10,
left: 18,
width: 40,
height: 40,
fill: '#af3',
lockRotation: true,
originX: 'left',
originY: 'top',
cornerSize: 15,
hasRotatingPoint: false,
perPixelTargetFind: true,
});
var circleBtn = new fabric.Circle({
radius: 20,
fill: '#f55',
top: 10,
left: 105,
});
var triangleBtn = new fabric.Triangle({
width: 40,
height: 35,
fill: 'blue',
top: 15,
left: 190,
});
var sqrText = new fabric.IText("Add Square", {
fontFamily: 'Indie Flower',
fontSize: 14,
fontWeight: 'bold',
left: 6,
top: 50,
selectable: false,
});
var cirText = new fabric.IText("Add Circle", {
fontFamily: 'Indie Flower',
fontSize: 14,
fontWeight: 'bold',
left: 95,
top: 50,
selectable: false,
});
var triText = new fabric.IText("Add Triangle", {
fontFamily: 'Indie Flower',
fontSize: 14,
fontWeight: 'bold',
left: 175,
top: 50,
selectable: false,
});
var shadow = {
color: 'rgba(0,0,0,0.6)',
blur: 3,
offsetX: 0,
offsetY: 2,
opacity: 0.6,
fillShadow: true,
strokeShadow: true
};
window.canvas.add(bg);
bg.setShadow(shadow);
window.canvas.add(squareBtn);
window.canvas.add(circleBtn);
window.canvas.add(triangleBtn);
window.canvas.add(sqrText);
window.canvas.add(cirText);
window.canvas.add(triText);
canvas.forEachObject(function (e) {
e.hasControls = e.hasBorders = false; //remove borders/controls
});
function draggable(object) {
object.on('mousedown', function() {
var temp = this.clone();
temp.set({
hasControls: false,
hasBorders: false,
});
canvas.add(temp);
draggable(temp);
});
object.on('mouseup', function() {
// Remove an event handler
this.off('mousedown');
// Comment this will let the clone object able to be removed by drag it to menu bar
// this.off('mouseup');
// Remove the object if its position is in menu bar
if(this.top<=75) {
canvas.remove(this);
}
});
}
draggable(squareBtn);
draggable(circleBtn);
draggable(triangleBtn);
this.canvas.on('object:moving', function (e) {
var obj = e.target;
obj.setCoords(); //Sets corner position coordinates based on current angle, width and height
canvas.forEachObject(function (targ) {
activeObject = canvas.getActiveObject();
if (targ === activeObject) return;
if (Math.abs(activeObject.oCoords.tr.x - targ.oCoords.tl.x) < edgedetection) {
activeObject.left = targ.left - activeObject.currentWidth;
}
if (Math.abs(activeObject.oCoords.tl.x - targ.oCoords.tr.x) < edgedetection) {
activeObject.left = targ.left + targ.currentWidth;
}
if (Math.abs(activeObject.oCoords.br.y - targ.oCoords.tr.y) < edgedetection) {
activeObject.top = targ.top - activeObject.currentHeight;
}
if (Math.abs(targ.oCoords.br.y - activeObject.oCoords.tr.y) < edgedetection) {
activeObject.top = targ.top + targ.currentHeight;
}
if (activeObject.intersectsWithObject(targ) && targ.intersectsWithObject(activeObject)) {
} else {
targ.strokeWidth = 0;
targ.stroke = false;
}
if (!activeObject.intersectsWithObject(targ)) {
activeObject.strokeWidth = 0;
activeObject.stroke = false;
activeObject === targ
}
});
});
}
More codes that I found but doesn't answer my problem:
var canvas = new fabric.Canvas('c');
canvas.on("after:render", function(){canvas.calcOffset();});
var started = false;
var x = 0;
var y = 0;
var width = 0;
var height = 0;
canvas.on('mouse:down', function(options) {
//console.log(options.e.clientX, options.e.clientY);
x = options.e.clientX;
y = options.e.clientY;
canvas.on('mouse:up', function(options) {
width = options.e.clientX - x;
height = options.e.clientY - y;
var square = new fabric.Rect({
width: width,
height: height,
left: x + width/2 - canvas._offset.left,
top: y + height/2 - canvas._offset.top,
fill: 'red',
opacity: .2
});
canvas.add(square);
canvas.off('mouse:up');
$('#list').append('<p>Test</p>');
});
});
This code adds a rectangle to the canvas. But the problem is this doesn't achieve what I want which is basically, as previously stated, that I want to be able to drag an img element and then wherever you drag that image on the canvas it will drop it precisely at that location.
CREDITS
Fabric JS: Copy/paste object on mouse down
fabric.js Offset Solution
it doesn't need to do some intricate stuff.
A logical framework under which to implement image dragging might be to monitor mouse events using event listeners.
On mouse down over an Image element within the page but not over the canvas, record which image element and the mouse position within the image. On mouse up anywhere set this record back to null.
On mouse over of the canvas with a non empty image record, create a Fabric image element from the Image element (as per documentation), calculate where it goes from the recorded image position and current mouse position, paste it under the mouse, make it draggable and simulate the effect of a mouse click to continue dragging it.
I have taken this question to be about the design and feasibility stages of program development.