Trying to fetch data from multiple spreadsheet's. All Sheet's are stored in same folder. Have to fetch data in one master sheet from only specific files by file name. I have written below script. It's working fine if we enter only one file name in specified range (in master sheet tab) (getSheetByName) but showing error while trying to fetch data for multiple files.
Showing error - "TypeError: Cannot read property 'length' of undefined"
Below is Script -
function get_compiled_data() {
var filelist = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("FileName");
var filelists = filelist.getRange("A2:A").getValues();
var folder = DriveApp.getFolderById("1li9hBP_W5gPkb_ASKqin4j1ZGEn1Gvji");
var fileindex = folder.getFilesByName(filelists);
var file;
var filetype;
var sheetID;
var collect_data = [];
var data;
while (fileindex.hasNext()) {
file = fileindex.next();
filetype = file.getMimeType();
if (filetype === "application/vnd.google-apps.spreadsheet"){
sheetID = file.getId();
data = getData(sheetID);
data = data.map(function(r){return r.concat([file.getName()]);});
collect_data = collect_data.concat(data);
}
}
var target = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Compiled_Data");
target.getRange("A2:AX").clearContent();
target.getRange(2, 1, collect_data.length, collect_data[0].length).setValues(collect_data);
}
function getData (sheetID) {
var sheet = SpreadsheetApp.openById(sheetID);
var tab = sheet.getSheets()[0];
var data = tab.getRange("A3:AX" + tab.getLastRow()).getValues();
return data;
}
Issue:
You are providing a 2D array to getFilesByName(name), when you should be providing a string. Because of this, the code never enters the while block and collect_data remains an empty array, causing collect_data[0] to be undefined, and producing the observed error when trying to access its length.
When you were looking for a single file name you were probably using getValue(), which retrieves a single value, which can be a string, which can be used in getFilesByName. getValues() returns a 2D array instead, so you should adapt your code so that it iterates through each value returned by getValues().
Solution:
Edit the getValues() line and wrap all the actions made from getFilesByName inside a loop the following way:
function get_compiled_data() {
var filelist = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("FileName");
var filelists = filelist.getRange(2, 1, filelist.getLastRow() - 1).getValues();
var folder = DriveApp.getFolderById("FOLDER-ID");
filelists.forEach(fileName => {
var fileindex = folder.getFilesByName(fileName[0]);
// Rest of code
});
});
Reference:
getValues()
getValue()
I’m brand new to programming and I’m currently working on a MySQL database. I’m using Visual Studio Code for all of my JavaScript, HTML, and CSS files.
I have a JavaScript server file that is giving me issues. Our professor gave us his code for the server JavaScript file (which is posted below), his client JavaScript file (which is named contacts.js), and his HTML file.
He told us to open the server JavaScript file, open a terminal and type: node contacts.js. However, doing this gives me error messages that say that the document is not defined.
Occasionally, I'll even get "module not found" errors.
We just did a similar project last week and the terminal worked just fine with a similar node.js command, but I’m running into issues now and don’t know what to do. Hours on Google haven’t helped at all and my professor can’t be contacted for the entire week.
I’m not sure how to get beyond this “document not defined” error. Any help would be appreciated.
Below is the server JavaScript file:
// The following statements are for database connection and queries
var mysql = require('mysql'); // use the msql libraries. Must use 'npm install msyql --save' before using
var bodyParser = require('body-parser'); // use the body-parser library for JSON use. Must 'npm install body-parser --save'
// Set up the SQL connection to the MYSQL database. This will all need to match what you set up in your DB
var connection = mysql.createConnection({
host:'localhost',
user: 'mike',
password: '********',
database: 'contacts'
});
// do the actual connecting by calling the connect method and log the result
connection.connect();
console.log("After connection to DB established in server, setting up web server");
//The following are for web server setup - we are using the express library that makes this all pretty easy
const express = require('express'); // use express library. must use 'npm install express --save'
const cors = require('cors'); // use cors library. must use 'npm install cors --save'
const app = express(); // get the express application object
const path = require('path'); // use the path library for managing paths. must use 'npm install path --save'
const port = 3000; // constant for the port we're using.
// set up the use of JSON url-encoding. Allows us to put all the arguments in the url
app.use(bodyParser.urlencoded({extended: false}));
app.use(bodyParser.json());
// We want to also serve static pages. This command sets that up. In my case, I created a subdirectory called 'public'
// and put the main html page (contacts.html), the javascript client file (contacts.js) and the CSS file (contacts.css)
// in that directory, and therefore I can get everything I need by just goint to (localhost:3000) and it all just works
app.use(express.static('public'));
// This is our main save handler (express calls these 'middleware'). The request coming from the client is a post
// and all the parameters/values are in the query object in the request object (req).
// All the field names here must match the names in the form (name='blah') which we use when we craft the request
// in the javascript saveContact().
// NOTE: we have to use the cors() method to make this all work. Look up cors (Cross-Origin Resource Sharing) to learn about it
app.post('/save', cors(), function (req, res) {
console.log("trying to save contact (post)"); // Log what we're doing
console.log(req); // log the actual request
var curId = req.query.Id; // Get the Id from the query object
var firstName = req.query.fname; // get the fname from the query object
var lastName = req.query.lname; // get the lname from the query object
var age = req.query.age; // etc. etc. etc.
var phone = req.query.phone;
var email = req.query.email;
// We can use the same handler for both cases of saving information:
// 1)we INSERT the new contact in the DB - the Id is 0 in this case
// 2)we UPDATE an existing contact in the DB - the Id is the correct Id for the contact we're updating
// Here we're crafting the appropriate SQL statements using the values above - either INSERT or UPDATE
if (curId > 0) {
var sql = `UPDATE contacts SET fname = '${firstName}', lname = '${lastName}', age = ${age}, phone = '${phone}', email = '${email}' WHERE Id = ${curId}`;
} else {
var sql = `INSERT INTO contacts (fname, lname, age, phone, email) VALUES ('${firstName}', '${lastName}', '${age}', '${phone}', '${email}')`;
}
// Here we're creating the query and the callback function for when we get a response from the DB asynchronously
// This same method executes the SQL call to the database connection we established earlier (above)
connection.query(sql, function (err, result) {
console.log("Trying to save contact into DB"); // log what we're doing
if (err) throw err; // If we get an error, send the error along
console.log(result.affectedRows + " record(s) saved");
res.status(201).send(result); // set the status code (201 = successful add) and send it
console.log(`result of post is: ${result}`); // log the result
console.log(result);
});
});
// This handler is for deleting a user given a valid Id.
// NOTE: we have to use the cors() method to make this all work. Look up cors (Cross-Origin Resource Sharing) to learn about it
app.post('/delete', cors(), function (req, res) {
console.log("trying to delete contact (post)"); // log what we're doing
console.log(req); // log the actual request we received
var curId = req.query.Id; // get the Id from the query object
console.log(curId); // log the Id
// As long as we have a valid Id (in variable curId), we craft the sql statement and execute the query
// all the SQL commands are asynchronous so we provide a callback function
if (curId > 0) {
var sql = `DELETE FROM contacts WHERE Id = ${curId}`; // This is the right SQL statement
connection.query(sql, function (err, result) {
console.log("Trying to delete contact from DB"); // log what we're trying to do
if (err) throw err; // if we get an error, pass it along to the client
console.log(result.affectedRows + " record(s) deleted");
res.status(200).send(result); // otherwise set the status to success (200) and send the result to the client
console.log(`result of post is:`); // log the result
console.log(result);
});
}
});
// THis is our static GET Handler if you just open a browser and type in 'http://localhost:3000'. the '/' means root
// and so this our default page (often called 'index.html' but in this case it's our 'contacts.html')
// Simply send the contacts.html page by getting the default path (wherever we have this javascript file)
app.get('/', function (req, res) {
console.log(req.params);
res.sendFile(path.join(__dirname + '\\contacts.html'));
});
// This is our handler for getting the full list of contacts
// NOTE: we have to use the cors() method to make this all work. Look up cors (Cross-Origin Resource Sharing) to learn about it
app.get('/list', cors(), function (req, res) {
console.log(`inside list GET function, req object is ${req}`);
console.log(req);
// Craft the simple select statement that just gets everything in the contacts table
var sql = `SELECT * FROM contacts`;
//Create the query and execute it, sending the appropriate result back to the client
connection.query(sql, function (err, result) {
console.log(`Trying to get list from DB - result is ${result}`);
console.log(`Inside get list - result first row is ${result[0]}`);
if (err) throw err; // if we get an error, pass it along to the client
res.send(result); // simply send the result of the query to the client.
console.log(`result of GET to list is: ${result}`);
});
});
// This is what actually starts the express server, listening on the port constant we defined at the beginning
// of the file (in this case I'm using 3000) and logging what we're doing.
app.listen(port, () => console.log(`Example app listening on port ${port}!`));
Below is the client JavaScript file:
// This JavaScript file is in support of the contacts application.
// Users can see and manage all their contacts, where a contact is [Id, firstname, lastname, age, phone, email]
// There are functions to manage the http interactions with the server backend
// and to manage the screen/user experience
// This is a globally available array of contacts we get back from the server. Set it initially to an empty array
document.contactList = [];
// This is the function queries the server (using an HTTP GET) to get the list of contacts
// We save the contacts to a globable variable in the document (contactList) and we fill
// both the table at the bottom of the document and a drop-down list used for management
// both of those functionality are function calls ('fillContactTable()' and 'fillContactSelect()')
function getContacts() {
console.log(`Getting contact list from server`); // log what we're doing
var xhttp = new XMLHttpRequest(); // create a variable for HTTP protocol
xhttp.onreadystatechange = function() { // callback function for when a response occurs
console.log(this.responseText); // log the response
// readyState is the XMLHttpRequest state that means we're done. Status is what is returned from the server
// a status code anywhere in the 200's is success. SO if we're done and get a success return code, then we're good!
if (this.readyState == 4 && (this.status >= 200 && this.status < 300)) {
console.log(`Got the contact list successfully`); // Log that we're good
document.contactList = this.responseText; // The response is the actual list of contacts.Set to globabl var in document
fillContactTable(); // Fill the table
fillContactSelect(); // Fill the drop down list (select element)
} else {
console.log(`failed to get contact list`); // Log failure if that's what we got
}
}
// We've set the callback function that handles the result. This is the actual setting up the http request (the open method)
// and the actual sending of the http request (send method)
xhttp.open("GET", "http://localhost:3000/list", true);
xhttp.send();
}
// Given an Id of a contact, get the rest of the contact information and return it
// The pLocal parater is in case we want to get the contact information from the server instead of getting it from
// the global variable (document.contactList). Default is to be local.
function getContactById(pId, pLocal = true) {
console.log(`Getting contact by ID = ${pId}`); // log what we're doing
if (pLocal) { // If we're local, get the data from document.contactList
var contactsJSON = JSON.parse(document.contactList); // parse the contactList into JSON format - easier to deal with
// Loop through all the contacts in the JSON formated list of contacts to look for the one we want (by Id)
for (loopIndex = 0; loopIndex < contactsJSON.length; loopIndex++) {
if (contactsJSON[loopIndex].Id == pId) { // if Id's match, we're good but log what we found
console.log(`Found contact in getContactById. Index = ${loopIndex}`);
console.log(contactsJSON[loopIndex]);
return contactsJSON[loopIndex]; // Return the found contact
}
}
console.log(`Did not find the contact in getContactById`); // log the fact that we didn't find it and return null
return null;
// For now, if we're not local just return null. Will add the code to get the data from the server later
} else {
return null;
}
}
// Simple function that just clears the form that we use for showing, creating new, and updating contacts
function clearEditForm() {
console.log("clearing the contact form"); // Log what we're doing
// Set all the values to empty (or 0 for the Id - that has to be a number)
document.getElementById('contact_id').value = 0;
document.getElementById('contact_fname').value = "";
document.getElementById('contact_lname').value = "";
document.getElementById('contact_age').value = "";
document.getElementById('contact_phone').value = "";
document.getElementById('contact_email').value = "";
// Now control the user experience. Hide the ID fields and change the name of the button to "Insert"
document.getElementById('contact_id').hidden = true;
document.getElementById('contact_id_label').hidden = true;
document.getElementById('save_button').innerHTML = "Insert Contact";
document.getElementById('save_button').name = "Insert Contact";
}
// Main function that saves the contact form. We have two cases to deal with:
// 1) We're inserting a new contact. In that case, the Id (curId below) will be 0
// 2) We're updating an exesting contact. In that case, the Id will NOT be 0
// If the ID is not a number >= 0, we have a problem so we don't do anything
function saveContact() {
console.log("Attempting to save contact"); // Log what we're doing
// Get all the values from the elements in the form by name.
var curId = document.getElementById('contact_id').value;
var curFName = document.getElementById('contact_fname').value;
var curLName = document.getElementById('contact_lname').value;
var curAge = document.getElementById('contact_age').value;
var curPhone = document.getElementById('contact_phone').value;
var curEmail = document.getElementById('contact_email').value;
console.log(`Trying to save contact in saveContact. Id = ${curId}`);
// As long as we have a valid Id (number at least 0) we'll make the http request (a POST)
if (curId >= 0) {
var xhttp = new XMLHttpRequest(); // Create a new HTTP object and put it in xHTTP variable
// As in all of our interactions implementing http, we supply a callback function for when we actually get a response
// Remember, all http request/responses should be asynchronous, and so we have to use callbacks
xhttp.onreadystatechange = function() {
console.log(this.responseText); // log what's happening
// If readyState shows we're done (value == 4) and status code is in the 200's we got a success response
if (this.readyState == 4 && (this.status >= 200 && this.status < 300)) {
console.log(`saved the contact successfully`); // Log our success
getContacts(); // Re-get our contact list since it has changed
} else {
console.log(`failed to save contact `); // Log our failure response
console.log(this.status); // log the actual status code
console.log(this.responseText); // log the actual response text
}
}
// Here we're crafting the http POST request with all the parameters urlencoded. Look up url encoding to understand it
// As usual, the open method is used to set up the call, and the send method actually sends the request
xhttp.open("POST", `http://localhost:3000/save?Id=${curId}&fname=${curFName}&lname=${curLName}&age=${curAge}&phone=${curPhone}&email=${curEmail}`, true);
xhttp.send();
}
}
// Function to delete a contact by creating the right server http request (a POST)
// We'll pass the Id of the contact we want to delete in the url (url-encoded)
// We'll get the name of the contact to be deleted and prompt the user to verify that they want to really delete the contact
// look up the window method 'confirm' to understand how that works
function deleteContact() {
console.log("Attempting to delete contact"); // Log what we're doing
var contactList = document.getElementById('contacts_list'); // get the drop-down select element in the form
var curId = contactList.value; // get the value of the form, which will be an Id of the contact to be deleted
var curIndex = contactList.selectedIndex; // We need the index of the option chosen to get the name for prompting the user
var curName = contactList.options[curIndex].text; // get the name from the option list based on the index
console.log(`Trying to verify delete. curid = ${curId}, curIndex = ${curIndex}, and curName = ${curName}`);
// Prompt the user to confirm using the window.confirm method. If they say ok, confirm returns true
// if they say cancel, confirm returns false. We're checking for the false, thus the not (!) at the beginning of the condition
if (!confirm(`Are you sure you want to delete contact: ${curName}?`)) {
return; // If we're here they said cancel, so just return out of here
}
console.log(`Trying to delete contact in fillEditForm. Id = ${curId}`);
if (curId.length > 0) { // Make sure we have a good Id
var xhttp = new XMLHttpRequest(); // create the http object
// Here's our callback for the asynchronous return. As long as we get a good status code, we update the form appropriately
xhttp.onreadystatechange = function() {
console.log(this.responseText); // log the actual response
// readyState 4 means we're done, and status in the 200's means success, so re-get the contact list from the server
if (this.readyState == 4 && (this.status >= 200 && this.status < 300)) {
console.log(`deleted the contact successfully`);
clearEditForm(); // clear the form since we deleted the contact
getContacts(); // get the contacts from the server
} else {
console.log(`failed to delete contact list`);
}
}
// Create the actual request and send it.
xhttp.open("POST", `http://localhost:3000/delete?Id=${curId}`, true);
xhttp.send();
}
}
// Simple function to clear the table element. We delete all the rows backwards. Make the function generic by allowing
// a parameter (pTable) which is the name of the table to be reset if there is more than one on the form
function tableDeleteRows(pTable = "") {
var curTable;
if (pTable.length == 0) {
curTable = document.getElementById('contacts_table');
} else {
curTable = document.getElementById(pTable);
}
// We start at the end of the rows (rows[length-1]), deleting backwards until we delete all of them
for (i = curTable.rows.length - 1; i >= 0; i--) {
curTable.deleteRow(i);
}
}
// Simple function to clear a drop-down select element. We delete all the rows backwards. Make the function generic by allowing
// a parameter (pSelect) which is the name of the select element to be reset if there is more than one on the form
function selectDeleteOptions(pSelect = "") {
var curSelect;
if (pSelect.length == 0) {
curSelect = document.getElementById('contacts_list');
} else {
curSelect = document.getElementById(pSelect);
}
// Go backward from the end of the list of options in the select, removing them until we remove all of them
for (i = curSelect.length - 1; i >= 0; i--) {
curSelect.remove(i);
}
}
// Assuming we have a contact chosen in the drop-down select element, fill the edit form with all the values for that contact
function fillEditForm() {
console.log("filling the contact form"); // Log what we're doing
var contactList = document.getElementById('contacts_list'); // get the drop-down list
var curId = contactList.value; // the selected element Id is the value of the list
console.log(`Trying to find contact in fillEditForm. Id = ${curId}`);
var curContact = getContactById(curId); // Get the whole contact by calling the function
console.log(curContact); // log the contact we're using to fill the form
// As long as we have a good contact, we fill the form
if (curContact != null) {
document.getElementById('contact_id').value = curContact['Id'];
document.getElementById('contact_fname').value = curContact['fname'];
document.getElementById('contact_lname').value = curContact['lname'];
document.getElementById('contact_age').value = curContact['age'];
document.getElementById('contact_phone').value = curContact['phone'];
document.getElementById('contact_email').value = curContact['email'];
}
// after we fill the form, we set elements appropriate to things like update and delete instead of add new
document.getElementById('contact_id').hidden = false;
document.getElementById('contact_id').disabled = true;
document.getElementById('contact_id_label').hidden = false;
document.getElementById('save_button').innerHTML = "Update Contact";
document.getElementById('save_button').name = "Update Contact";
}
// This function fills the table at the bottom of the document with all the contacts and all the information
function fillContactTable() {
console.log("Filling the contacts table in the form"); // Log what we're doing
tableDeleteRows("contacts_table"); // Reset the table
// if we don't have anything in the global contact list - forget it and return
if (document.contactList.length == 0) {
console.log("the contact list/array is empty!");
return;
}
// We have contacts in the global array, so first parse the array into JSON and process it
var contactsJSON = JSON.parse(document.contactList);
var properties = ['Id', 'fname', 'lname', 'age', 'phone', 'email']; // we need the property names
var tr, curRow; // variables for table properties
var contactTable = document.getElementById("contacts_table"); // get the table element
// cycle through the rows in the contacts array
for (var rowIndex = 0; rowIndex < contactsJSON.length; rowIndex++) {
console.log(`Creating table rows, rowindex is ${rowIndex}`);
tr = document.createElement('tr'); //create a new table row element
curRow = contactsJSON[rowIndex]; // get the current row from the array
console.log(curRow); // log the data in the current row
// Cycle through the columns - defined in the property array above and add column elements to the row in the table
for (var i = 0; i < properties.length; i++) {
console.log(`Creating table columns for row ${i}, property is ${properties[i]} value is ${curRow[properties[i]]}`);
var td = document.createElement('td'); // create a data element for the column
td.appendChild(document.createTextNode(curRow[properties[i]])); //Append the property data to the new data element
tr.appendChild(td); // append the new data element to the row element
}
contactTable.appendChild(tr); // append the row element to the table element
}
console.log("Finished procesing contacts list");
}
// Fill the drop-down select. First reset the select (removing all options), then recreate it
function fillContactSelect() {
console.log("Filling the contacts drop down select in the form"); // log what we're doing
selectDeleteOptions("contacts_list"); // Reset the select element clearing all options
// if we don't have anything in the global contact list - forget it and return
if (document.contactList.length == 0) {
console.log("the contact list/array is empty!");
return;
}
// We have contacts in the global array, so first parse the array into JSON and process it
var contactsJSON = JSON.parse(document.contactList);
var properties = ['Id', 'fname', 'lname']; // only need Id, fname, lname for drop down
var option, curRow; // variables for table properties
var contact = document.getElementById("contacts_list"); // get the select drop down element
// cycle through the rows in the contacts array
for (var rowIndex = 0; rowIndex < contactsJSON.length; rowIndex++) {
console.log(`Creating select items, rowindex is ${rowIndex}`);
option = document.createElement('option'); //create a select option element
curRow = contactsJSON[rowIndex]; // get the current row from the array
console.log(curRow); // log the data in the current row
// the value of this option will be the id, since that's what we'll use to get a contact. The text is fname + lname
option.value = curRow["Id"];
option.appendChild(document.createTextNode(`${curRow['fname']} ${curRow['lname']}`));
contact.appendChild(option); // append the option to the select element
}
console.log("Finished procesing contacts list");
}
// When the windo first loads, get the list of contacts which will also fill the table and drop down list
window.onload = function() {
getContacts();
};
You are running the wrong JS file. You want to do:
node contactserver.js
At the moment you are running contacts.js, which is client-side code.
To expand on this, you're seeing that error because document is a global variable available in browsers, but not in Node.js. Frontend code designed to run in a browser often relies in browser APIs that simply don't exist on a server, so attempting to run a client-side only file in a server environment will throw errors when it can't find global objects that only exist in a browser.
(Props to #Jon Church for the explanation from the comments below)
Turns out that contacts.js was the wrong file. Typing into the terminal: node contactsserver.js was the solution.
I have created a google sheet with a lot of info for a beach volleyball cup and I want to call an API I have created when a checkbox is checked in this sheet.
function onEdit(e){
const ui = SpreadsheetApp.getUi();
const spreadsheets = SpreadsheetApp.getActive();
const configSheet = spreadsheets.getSheetByName("Config")
var tourneyId = String(configSheet.getRange(2,4).getValue())
var tourneyTitle = String(configSheet.getRange(2,5).getValue())
var sheet = spreadsheets.getActiveSheet()
if (sheet.getName() == "LiveScore"){
var actRng = sheet.getActiveRange();
var editColumn = actRng.getColumn();
var rowIndex = actRng.getRowIndex();
actRng = actRng.getCell(1, 1);
var headers = sheet.getRange(1, 1, 1, sheet.getLastColumn()).getValues();
if(editColumn == 7 && rowIndex != 1){
onStartBroadcastClicked(actRng, ui, sheet, rowIndex, editColumn, tourneyTitle);
}
}
}
There is never any problems with this part as I see it. But when i get into the function onStartBroadcastClicked:
function onStartBroadcastClicked(actRng, ui, sheet, rowIndex, editColumn, tourneyTitle){
var homeTeam = String(sheet.getRange(rowIndex, 14).getValue());
... // more setting variables
var endTime = new Date(startTime.getTime() + MILLIS_PER_MATCH);
if(actRng.isChecked()){
var response = ui.alert("You are about to start a new broadcast. Are you sure?" +
"\n Title: " + title, ui.ButtonSet.YES_NO);
if (response == ui.Button.YES) {
var httpRequest = "https://someUrl";
var options =
{
'method':'POST',
'contentType': 'application/json',
'payload' : JSON.stringify({
"title" : title,
... // setting all variables
"description" : description
}),
'muteHttpExceptions' : true,
'headers' : {
"Authorization": "Basic " + Utilities.base64Encode(USERNAME + ":" + PASSWORD)
}
};
ui.alert("Waiting.......")
var result = UrlFetchApp.fetch(httpRequest, options);
ui.alert(result.getContentText())
The issue is that it always gets to the line ui.alert("Waiting......."), but when triggered from the checkbox, it never succeeds the http POST request. If I click play inside the editor, it succeeds and I got the response in the alertbox.
Could it be some timeout or some autosave issues? Does anyone have any idea if where to keep looking? I've been stuck here for some time now and I would be really happy if anyone can point me to the correct direction.
The modification point of your issue is to use the installable trigger of OnEdit event. When the methods which are required to authorize used at the simple trigger, the error occurs. This situation makes us think that it seems the script doesn't work.
In order to avoid this error, please use the installable triggers of OnEdit event trigger.
As an important point, before you install the trigger, please rename the function name of onEdit() to other name. And install the renamed function name as the OnEdit event trigger. By this, the duplicate run of onEdit() can be prevented. If onEdit() function is installed as the installable trigger, when a cell is edited, the function is run 2 times. Ref.
By above settings, when the cell is edited, UrlFetchApp.fetch() works.
References:
Simple Triggers
Installable Triggers
Asynchronous Processing using Event Triggers
I was able to get a script to work with a trigger if I created the script from script.google.com and call the Google Sheet and tab from the script. I'm manually entered in my API calls per cell within a specified Row:
function fetchUrls() {
var spreadsheetId = "ENTER GOOGLE SHEET ID";
var spreadsheet = SpreadsheetApp.openById(spreadsheetId);
var sheet = spreadsheet.getSheetByName("ENTER SHEET NAME");
var range = sheet.getRange("ENTER RANGE OR FULL COLUMN"); // specify the range of cells in column B
var urls = range.getValues(); // get the values of the cells and store them
in an array
var cache = CacheService.getScriptCache();
for (var i = 0; i < urls.length; i++) {
if(urls[i][0] != "") { // check if the current cell is not empty
var url = urls[i][0];
var result = cache.get(url);
if(!result) {
var response = UrlFetchApp.fetch(url);
result = response.getContentText();
cache.put(url, result, 21600);
}
sheet.getRange(i+1,3).setValue(result); // set the value of the current cell to the result of the API call in column C
}
}
}
Does anyone know how we can generate report from data in datasource in Google AppMaker automatically (e.g generate report at 12a.m.) instead of manually click export data in deployments every time user need the report.
I have seen something similar on Exporting data out of Google AppMaker but also no one tried to answer that.
Really appreciate if there is anyone who know how to solve this :)
This can be achieved by using Installable Triggers.
Say for example, you have a model with students data that has three fields; name(string), age(number) and grade(number). On the server script you can write something like this:
//define function to do the data export
function dataExport() {
//create sheet to populate data
var fileName = "Students List " + new Date(); //define file name
var newExport = SpreadsheetApp.create(fileName); // create new spreadsheet
var header = ["Name", "Age", "Grade"]; //define header
newExport.appendRow(header); // append header to spreadsheet
//get all students records
var ds = app.models.students.newQuery();
var allStudents = ds.run();
for(var i=0; i< allStudents.length; i++) {
//get each student data
var student = allStudents[i];
var studentName = student.name;
var studentAge = student.age;
var studentGrade = student.grade;
var newRow = [studentName, studentAge, studentGrade]; //save studen data in a row
newExport.appendRow(newRow); //append student data row to spreadsheet
}
console.log("Finished Exporting Student Data");
}
//invoke function to set up the auto export
function exportData(){
//check if there is an existing trigger for this process
var existingTrigger = PropertiesService.getScriptProperties().getProperty("autoExportTrigger");
//if the trigger already exists, inform user about it
if(existingTrigger) {
return "Auto export is already set";
} else { // if the trigger does not exists, continue to set the trigger to auto export data
//runs the script every day at 1am on the time zone specified
var newTrigger = ScriptApp.newTrigger('dataExport')
.timeBased()
.atHour(1)
.everyDays(1)
.inTimezone("America/Chicago")
.create();
var triggerId = newTrigger.getUniqueId();
if(triggerId) {
PropertiesService.getScriptProperties().setProperty("autoExportTrigger", triggerId);
return "Auto export has been set successfully!";
} else {
return "Failed to set auto export. Try again please";
}
}
}
Then, to delete/stop the auto export, in case you need to, you can write the following on the server script too:
function deleteTrigger() {
//get the current auto export trigger id
var triggerId = PropertiesService.getScriptProperties().getProperty("autoExportTrigger");
//get all triggers
var allTriggers = ScriptApp.getProjectTriggers();
//loop over all triggers.
for (var i = 0; i < allTriggers.length; i++) {
// If the current trigger is the correct one, delete it.
if (allTriggers[i].getUniqueId() === triggerId) {
ScriptApp.deleteTrigger(allTriggers[i]);
break;
//else delete all the triggers found
} else {
ScriptApp.deleteTrigger(allTriggers[i]);
}
}
PropertiesService.getScriptProperties().deleteProperty("autoExportTrigger");
return "Auto export has been cancelled";
}
You can check the demo app right here.
The reference to the script properties service is here.
The reference to the Time Zones list is here.
I hope this helps!
It seems that you are looking for daily database backups. App Maker Team recommends migrating apps to Cloud SQL if you haven't done this so far. Once you start using Cloud SQL as your data backend you can configure backups through Google Cloud Console:
https://cloud.google.com/sql/docs/mysql/backup-recovery/backups
I am using a Google App script to send data from an HTML form to a Google spreadsheet. This works perfectly when I have the spreadsheet open in my browser; the data I put in the form is submitted to the sheet. On the other hand, when I close the spreadsheet and fill out the form, noting is submitted to the sheet.
Here is my script.
// 1. Enter sheet name where data is to be written below
var SHEET_NAME = "Sheet1";
// 2. Run > setup
//
// 3. Publish > Deploy as web app
// - enter Project Version name and click 'Save New Version'
// - set security level and enable service (most likely execute as 'me' and access 'anyone, even anonymously)
//
// 4. Copy the 'Current web app URL' and post this in your form/script action
//
// 5. Insert column names on your destination sheet matching the parameter names of the data you are passing in (exactly matching case)
var SCRIPT_PROP = PropertiesService.getScriptProperties(); // new property service
// If you don't want to expose either GET or POST methods you can comment out the appropriate function
function doGet(e){
return handleResponse(e);
}
function doPost(e){
return handleResponse(e);
}
function handleResponse(e) {
// shortly after my original solution Google announced the LockService[1]
// this prevents concurrent access overwritting data
// [1] http://googleappsdeveloper.blogspot.co.uk/2011/10/concurrency-and-google-apps-script.html
// we want a public lock, one that locks for all invocations
var lock = LockService.getPublicLock();
lock.waitLock(30000); // wait 30 seconds before conceding defeat.
try {
// next set where we write the data - you could write to multiple/alternate destinations
var doc = SpreadsheetApp.openById(SCRIPT_PROP.getProperty("key"));
var sheet = doc.getSheetByName(SHEET_NAME);
// we'll assume header is in row 1 but you can override with header_row in GET/POST data
var headRow = e.parameter.header_row || 1;
var headers = sheet.getRange(1, 1, 1, sheet.getLastColumn()).getValues()[0];
var nextRow = sheet.getLastRow()+1; // get next row
var row = [];
// loop through the header columns
for (i in headers){
if (headers[i] == "Timestamp"){ // special case if you include a 'Timestamp' column
row.push(new Date());
} else { // else use header name to get data
row.push(e.parameter[headers[i]]);
}
}
// more efficient to set values as [][] array than individually
sheet.getRange(nextRow, 1, 1, row.length).setValues([row]);
// return json success results
return ContentService
.createTextOutput(JSON.stringify({"result":"success", "row": nextRow}))
.setMimeType(ContentService.MimeType.JSON);
} catch(e){
// if error return this
return ContentService
.createTextOutput(JSON.stringify({"result":"error", "error": e}))
.setMimeType(ContentService.MimeType.JSON);
} finally { //release lock
lock.releaseLock();
}
}
function setup() {
var doc = SpreadsheetApp.getActiveSpreadsheet();
SCRIPT_PROP.setProperty("key", doc.getId());
}
I suspect that there is no "active spreadsheet" when you have the spreadsheet closed.
function setup() {
var doc = SpreadsheetApp.getActiveSpreadsheet();
SCRIPT_PROP.setProperty("key", doc.getId());
}
I recommend that you hardcode the spreadsheet id into your code.