I have been working on a seemingly simple graphic. I wish to create circles, with a line connecting the circles, and filling the circles in with some background. I have almost got it, but this one piece is tripping me up.
I can define the canvas, create the circles, and line connecting them just fine:
var canvas = document.getElementById('canvas');
var ctx = canvas.getContext('2d');
canvas.width = $(window).width();
canvas.height = $(window).height();
ctx.beginPath();
ctx.strokeStyle = "black";
ctx.lineWidth = 10;
//Create two nodes
ctx.arc( 100, 100, 25, 0, 2*Math.PI);
ctx.moveTo(200+25, 200)
ctx.arc( 200, 200, 25, 0, 2*Math.PI);
//line connecting two nodes
ctx.moveTo(100, 100);
ctx.lineTo(200, 200);
ctx.stroke();
This would look like this:
What I then do is fill the circles with an image (this is why I use clip()), but using a white color fill for the sake of example demonstrates the problem as well:
//simulate filling in nodes with image, in this case solid color
ctx.clip();
ctx.fillStyle = "white";
ctx.fill();
Now I am almost there, but there are some jagged edges there that I have read is just a little "bug" in Chrome, and also I like that thick black outline on the circles. So, I want to go back over just the 2 circles and outline them. It seems no matter what I do, the context always remembers that line connecting the two, and I end up with the connector line over the top of the image after calling stroke():
//would like to just re-outline circles, not connecting line
ctx.stokeStyle = "black";
ctx.arc( 100, 100, 25, 0, 2*Math.PI);
ctx.moveTo(200+25, 200)
ctx.arc( 200, 200, 25, 0, 2*Math.PI);
ctx.stroke();
What I can't figure out is how to just outline the 2 circles again after filling in the white background (loading the image)?
I think about it like drawing in layers. First I draw some lines, then I put the images in, then I draw again on top. Not sure if the html canvas is meant to be used like that. Thanks.
JSFiddle Example Here
You are forgetting to begin a new path.
Whenever you start a new shape you must use ctx.beginPath or the context will redraw all the previous paths.
BTW the jaggy circles is because you are re-rendering them, this causes the edges to get jaggies.
var canvas = document.createElement("canvas");
var ctx = canvas.getContext('2d');
canvas.width = 500;
canvas.height = 500;
document.body.appendChild(canvas);
ctx.setTransform(1,0,0,1,0,-50); // just moving everything up to be seen in snippet.
ctx.beginPath();
ctx.strokeStyle = "black";
ctx.fillStyle = "#FAFAFF";
ctx.lineWidth = 10;
//Create two nodes
/* dont draw the two circle the first time as you are
doubling the render causing the edges to get to sharp
making them appear jaggy.
ctx.arc( 100, 100, 25, 0, 2*Math.PI);
ctx.moveTo(200+25, 200)
ctx.arc( 200, 200, 25, 0, 2*Math.PI);
*/
//line connecting two nodes
ctx.moveTo(100, 100);
ctx.lineTo(200, 200);
ctx.stroke();
ctx.beginPath(); // start a new path and removes all the previous paths
//Create two nodes
ctx.arc( 100, 100, 25, 0, 2*Math.PI);
ctx.moveTo(200+25, 200)
ctx.arc( 200, 200, 25, 0, 2*Math.PI);
ctx.fill();
ctx.beginPath(); // start a new path and removes all the previous paths
//Create two nodes
ctx.arc( 100, 100, 25, 0, 2*Math.PI);
ctx.moveTo(200+25, 200)
ctx.arc( 200, 200, 25, 0, 2*Math.PI);
ctx.stroke();
Related
I have an issue where I am grabbing a users displayAvatar() and then I use an arc to make the image round. This works fine, however, I need to place a circle on top of that image, but it is getting cut in half because of the previous clip()
Without clip() : https://i.gyazo.com/b474c656f33a1f004f5e3becffcef527.png
With clip() : https://i.gyazo.com/da13377cd3f6dc7516c2b8fd1f0f8ac9.png
I know that in the 'With clip()' image, it appears as if the arc border is showing outside of the clip, but that is hardcoded into the image, I put it as a guide with an image editor.
I tried moving around the code, I removed the line ctx.clip() and saw that my circle displays fine on top of the image.
// circle around avatar
ctx.beginPath();
ctx.arc(122.5, 141.8, 81, 0, Math.PI * 2, true);
ctx.closePath();
ctx.clip();
const avatar = await Canvas.loadImage(
message.author.displayAvatarURL({ format: 'png' })
);
ctx.strokeStyle = '#ffffff';
ctx.strokeRect(0, 0, canvas.width, canvas.height);
ctx.drawImage(avatar, 41.5, 60.5, 162, 162);
// presence circle
ctx.beginPath();
ctx.arc(184.5, 193.5, 19, 0, Math.PI * 2, true);
ctx.strokeStyle = '#000000';
ctx.lineWidth = 8;
ctx.stroke();
ctx.fillStyle = userStatusColor;
ctx.fill();
Take a look at the canvas clip() definition:
https://www.w3schools.com/tags/canvas_clip.asp
Tip: Once a region is clipped, all future drawing will be limited to the clipped region (no access to other regions on the canvas). You can however save the current canvas region using the save() method before using the clip() method, and restore it (with the restore() method) any time in the future.
Below is an example using the save and restore
var canvas = document.getElementById("canvas");
var ctx = canvas.getContext("2d");
ctx.beginPath();
ctx.arc(90, 90, 81, 0, Math.PI * 2, true);
ctx.stroke();
ctx.save();
ctx.clip();
ctx.beginPath();
ctx.arc(150, 50, 19, 0, Math.PI * 2, true);
ctx.fillStyle = '#0000ff';
ctx.lineWidth = 8;
ctx.stroke();
ctx.fill();
ctx.restore();
ctx.beginPath();
ctx.arc(170, 99, 19, 0, Math.PI * 2, true);
ctx.fillStyle = '#ff0000';
ctx.lineWidth = 8;
ctx.stroke();
ctx.fill();
<canvas id="canvas"></canvas>
I have these 4 layers.
What I'm trying to do is put the red and blue layer into one mask. But I don't want the purple or orange layer to be affected by this mask (only the red and blue). I manage to make it work for the orange but not for the purple layer
See my code
var canvas = document.querySelector('canvas');
canvas.height = window.innerHeight
canvas.width = window.innerWidth
var ctx = canvas.getContext('2d');
//this should'nt be affected by the mask
ctx.beginPath()
ctx.fillStyle = 'purple';
ctx.rect(0, 50, 100, 100);
ctx.fill()
//this is the mask
ctx.beginPath()
ctx.rect(10, 10, 70, 70);
ctx.fillStyle = 'green';
ctx.fill()
ctx.globalCompositeOperation = 'source-atop';
//this need to be inside the mask
ctx.beginPath()
ctx.fillStyle = 'blue';
ctx.rect(10, 10, 100, 100);
ctx.fill()
//this need to be inside the mask
ctx.beginPath()
ctx.fillStyle = 'red';
ctx.rect(50, 40, 100, 100);
ctx.fill()
ctx.globalCompositeOperation = 'source-over'; //reset
//this should'nt be affected by the mask
ctx.beginPath()
ctx.fillStyle = 'orange';
ctx.rect(200, 40, 100, 100);
ctx.fill()
And the fiddle https://jsfiddle.net/ws3b4q95/4/
Canvas doesn't know about shapes as objects, it only cares about pixels. So the purple rectangle can't be excluded from your mask, because everyting that's already drawn on the canvas, will be part of the mask.
Instead you should draw the rectangle after you've applied the mask, and use destination-over operation:
//this need to be inside the mask
ctx.beginPath()
ctx.fillStyle = 'red';
ctx.rect(50, 40, 100, 100);
ctx.fill()
//this should'nt be affected by the mask
ctx.globalCompositeOperation = 'destination-over';
ctx.beginPath()
ctx.fillStyle = 'purple';
ctx.rect(0, 40, 100, 100);
ctx.fill()
This is nice summary from Mozilla about composite operations: MDN web docs: CanvasRenderingContext2D.global .CompositeOperation
I want to draw two objects on the canvas with an opacity of 0.2.
Both items partly overlap. Where they overlap, the opacity will be 0.4, as compared to 0.2 for the non-overlapping parts.
i.e. canvas 100w, 100h.
https://jsbin.com/wicigarinu/edit?js,output
ctx.globalAlpha = 0.2;
ctx.beginPath();
ctx.arc(50, 50, 25, 0, 2*Math.PI, false);
ctx.fill();
ctx.closePath();
ctx.beginPath();
ctx.arc(65, 65, 20, 0, 2*Math.PI, false);
ctx.fill();
ctx.closePath();
How would i be able to draw on the same spot, but keep the originally set opacity, even on coordinates where more than 1 fill happens ?
You can draw on a helper canvas with full opacity, then copy to the real canvas with alpha < 1.
Here's a basic example for this:
const canvas = document.getElementById('canvas');
const ctx = canvas.getContext('2d');
//create helper canvas
const hCanvas = document.createElement('canvas');
const hCtx = hCanvas.getContext('2d');
//draw on helper canvas
hCtx.beginPath();
hCtx.arc(50, 50, 25, 0, 2*Math.PI, false);
hCtx.fill();
hCtx.closePath();
hCtx.beginPath();
hCtx.arc(65, 65, 20, 0, 2*Math.PI, false);
hCtx.fill();
hCtx.closePath();
//copy to real canvas with alpha < 1
ctx.globalAlpha = 0.2;
ctx.drawImage(hCanvas, 0, 0);
<canvas id="canvas"></canvas>
I'm wondering if the following code yields appropriate behavior. I feel like the top left square should still be green. that is, if I clip one area, ten restore, then paint in a second area, the canvas paints in BOTH areas. Why?
https://jsfiddle.net/s6t8k3w3/
var my_canvas = document.getElementById('canvas');
var ctx = my_canvas.getContext("2d");
//Make Clipping Path 1
ctx.save();
ctx.rect(20, 20, 100, 100);
ctx.clip();
//Fill Background with Green
ctx.fillStyle = 'rgba(0,255,0,1)';
ctx.fillRect(0, 0, my_canvas.width, my_canvas.height);
//Close Clipping Path 1
ctx.restore();
//Open Clipping Path 2
ctx.save();
ctx.rect(50, 50, 100, 100);
ctx.clip();
//Fill background with Blue
ctx.fillStyle = 'rgba(0,0,255,1)';
ctx.fillRect(0, 0, my_canvas.width, my_canvas.height);
//Draw Line
ctx.beginPath();
ctx.moveTo(0, 0);
ctx.lineTo(500, 500);
ctx.stroke();
//CloseClipping Path 2
ctx.restore();
You're not actually opening a second clipping path with that second ctx.save(); to do that, you need to call ctx.beginPath()
I'm making a game with javascript canvas. I'm drawing all the game elements, like the player, blocks and lines, but I don't want you to see all that. Instead want the whole screen to be black, expect for in some places where there is lightsources. I don't need any shadows, just a circle on the screen that is lit up with a radial gradient. I am able to achieve this for one lightsource by adding a transparent gradient after I have drawn everything else, like this: (imagine the red rectangle to be all the things in the game)
//Drawing all the game elements
ctx.fillStyle = "red";
ctx.fillRect(100, 100, 400, 300);
//adding the darkness and the lightsources
var grd = ctx.createRadialGradient(150, 100, 5, 150, 100, 100);
grd.addColorStop(0, "transparent");
grd.addColorStop(1, "black");
ctx.fillStyle = grd; ctx.fillRect(0, 0, 600, 400);
JSFiddle
But how can I achieve this with multiple lightsources? The technique showed won't work.
I have tried using the Illuminated.js api, but that was incredibly slow, and I don't need anything of the shadows and all that fancy stuff, just a circle where you can see the game.
Here's an example of my approach - create black&white mask and multiply the base with it:
var c = document.getElementById("myCanvas");
var ctx = c.getContext("2d");
//Drawing all the game elements
ctx.fillStyle = "red";
ctx.fillRect(100, 100, 400, 300);
//adding the darkness and the lightsources
function addlight(ctx, x, y) {
var grd = ctx.createRadialGradient(x, y, 10, x, y, 150);
grd.addColorStop(0, "white");
grd.addColorStop(1, "transparent");
ctx.fillStyle = grd;
ctx.fillRect(0, 0, 600, 400);
}
var buffer = document.createElement('canvas');
buffer.width = 600;
buffer.height = 400;
b_ctx = buffer.getContext('2d');
b_ctx.fillStyle = "black";
b_ctx.fillRect(0, 0, 600, 400);
addlight(b_ctx, 150, 100);
addlight(b_ctx, 350, 200);
addlight(b_ctx, 450, 250);
ctx.globalCompositeOperation = "multiply";
ctx.drawImage(buffer, 0, 0);
<canvas id="myCanvas" width="600" height="400" style="border:1px solid #d3d3d3;">