I am trying to print out my array vertically. So once one of the items is listed in the array, include a skipped line before the next element is printed.
My code looks like the following. It is printing out, however it's horizontal and not appealing
request.execute(function(resp) {
for (var x = 0; x < resp.items.length; x++){
var str = resp.items[x].title;
var result = str.link(resp.items[x].alternateLink);
linkPush.push(result);
}
document.getElementById("container9").innerHTML = linkPush;
});
Thanks in advance
Try this
document.getElementById("container9").innerHTML = linkPush.join('<br/>');
Wrap anchors with divs
request.execute(function(resp) {
for (var x = 0; x < resp.items.length; x++){
var str = resp.items[x].title;
var result = str.link(resp.items[x].alternateLink);
linkPush.push('<div>', result, ',</div>');
}
document.getElementById("container9").innerHTML = linkPush.join('');
});
Related
Short term problem: I have three paths on an artboard. The end of one path has a point at the same position as the beginning of another. The other path is separate. They are all grouped. I have some code that loops through the pathsin the group, and if one path ends where another begins it tried to join them together. The group must be highlighted. To start with my artboard look like this (The top line is two paths):
An after the script is run it looks like this:
With a lot of points added to the end of the line underneath. Could someone lend me a hand with this, Ideally, I'd like it to look like this:
The code looks like this:
var doc = activeDocument;//Gets the active document
var numArtboards = doc.artboards.length;//returns the number of artboards in the document
var intersections = true
var group = doc.selection[0]
var paths = []
var intersecttions = 0
// Builds an array of all the paths in the grouped object
if (group !== undefined && group.pageItems.length >= 2) {
for (var i = 0; i < group.pageItems.length; i++) {
var item = group.pageItems[i];
if (item instanceof PathItem) {
item.id = 'Path No' + i;
paths.push(item)
}
}
}
//Sets the first path that will be added to
$.write('paths length ', paths.length,'\n')
var chain = paths[0]
var chainPoints = chain.pathPoints
var chainLength = chainPoints.length - 1
var c1 = chainPoints[0]
var c2 = chainPoints[chainLength]
$.write('c ', c1.anchor,':::', c2.anchor,'\n')
//loops through the paths in the group to see if any overlap the first past
for (var i = 1; i < paths.length-1; i++) {
var link = paths[i]
$.write(link, '\n')
var linkPoints = link.pathPoints
var linkLength = linkPoints.length - 1
$.write('l ', l1.anchor, ':::', l2.anchor, '\n')
if (toString(c1.anchor) === toString(l2.anchor)) {
$.write('inttersection', '\n')
$.write('link', link.id, '\n')
for (var j = 0; j < linkLength; ++j) {
chain.pathPoints.add(linkPoints[j])
$.write (linkPoints[j], '\n')
}
}
}
The first problem is that it's not detecting the instance of overlap correctly. The line:
if (toString(c1.anchor) === toString(l2.anchor)) {
is not comparing one string to another but comparing a true response with another true response. It should be:
if (String(c1.anchor) === String(l2.anchor)) {
you also have to pass across the attributes of each point you are adding to the line and remove the old line, so within the j loop you'll need to add the following
for (var j = 0; j < linkLength; ++j) {
var pp1 = chainPoints.add()
var p2i = linkPoints[j];
pp1.anchor = p2i.anchor;
pp1.rightDirection = p2i.rightDirection;
pp1.leftDirection = p2i.leftDirection;
pp1.pointType = p2i.pointType;
pp1.handle = p2i.handle;
}
link.remove();
This seems to work except that it doesn't add the last point of the second line. I'm guessing that the loop length may not be set correctly If I work it out I'll update the post. I found this in Hiroyuki Sato code for his JoinReasonable scripts http://shspage.com/aijs/en/
I am trying to run a replace text function on my slides based on an two arrays; the first array is the values that are to be replaced and the second array are the values that the corresponding values in the first array should be replaced with.
I.e. the first value in the first array should be replaced by the first value in the second array.
This is my attempt at doing it
function myFunction() {
var currentPresentationSlide = SlidesApp.getActivePresentation().getSlides();
var array1 = ['{{remove}}','{{remove2}}','{{remove3}}'];
var array2 = ['new value','new value2','new value 3'];
for (i = 0, s = 0, x = 0; i < currentPresentationSlide.length, s < array1.length, x < array2.length; i++, s++, x++) {
currentPresentationSlide[i].replaceAllText(array1[s],array2[x])
}
}
What further complicates it is, that the replaceAllText will only run on a single page and not the entire presentation, hence it will have to be run as a loop on each individual page in the slide (which is the reason for the loop with the i variable.
Does anyone know what I am doing wrong, cause this is not working for me
Thanks to Rup in the comments i solved it. Just in case anyone has the same issue this is my solution:
function myFunction() {
var currentPresentationSlide = SlidesApp.getActivePresentation().getSlides();
var array1 = ['{{remove}}','{{remove2}}','{{remove3}}'];
var array2 = ['new value','new value 2','new value 3'];
for (i = 0; i < currentPresentationSlide.length; i++) {
for (s = 0; s < array1.length; s++)
currentPresentationSlide[i].replaceAllText(array1[s],array2[s])
}
}
Unable to split same string for two times.What i am doing wrong?
// my original string
var str = "Left,Right-broken at left side";
var ary = "Left,Right-broken at left side";
//getting text after - (working fine)
var res = str.split("-").pop();
$('#disc_comm_tlside_ed').empty();
$('#disc_comm_tlside_ed').val(res);
// with this i can get text before -once again i need to splt by comma only
var myarrays= str.substr(0, str.indexOf('-'));
//even this also returning original string
var splt = ary.split(',');
// alert(splt) when i alert this getting full string
for(var i = 0; i < splt.length; i++)
{
//alert(myarray[i]);
$(this).find("option[value ='"+myarray[i]+"']").attr("selected",true);
$('.batch_ed').multiselect('rebuild');
}
Finally returning original string!!
Need to get text before-and split text separated by ,
need to get left and right only as array
Edit: adding the code snippet posted in the comment.
var elements = "";
var batchnoe= "";
$.each(data.response.frc_disloc, function (a,b){
batchnoe = '.batch_ed';
$(batchnoe).each(function(i, obj) {
var batch_splt = b.frac_side;
var myarray = batch_splt.split(',');
for(var i = 0; i < myarray.length; i++) {
$(this).find("option[value ='"+myarray[i]+"']").attr("selected",true); $('.batch_ed').multiselect('rebuild');
}
});
});
please check console logs for the output.
// my original string
var str = "Left,Right-broken at left side";
var ary = "Left,Right-broken at left side";
//getting text after - (working fine)
var res = str.split("-").pop();
$('#disc_comm_tlside_ed').empty();
$('#disc_comm_tlside_ed').val(res);
// with this i can get text before -once again i need to splt by comma only
var myarrays= str.substr(0, str.indexOf('-'));
//even this also returning original string
var splt = myarrays.split(',');
console.log(splt);
// alert(splt) when i alert this getting full string
for(var i = 0; i < splt.length; i++)
{
console.log(splt[i]);
$(this).find("option[value ='"+splt[i]+"']").attr("selected",true);
//$('.batch_ed').multiselect('rebuild');
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<div id="disc_comm_tlside_ed"></div>
I have encountered a very strange bug:
I derive a new array allSavings[] from another one (tours[]) and sort it in the function calculateAllSavings(). Before I call the function I can access tours[] just fine, but afterwards, I can't anymore. The div tags demo1 and demo2 both exist and are working fine for other outputs.
function euclDist(node1,node2){
if(node1 != node2){
var x = Math.pow(nodes[node2].x - nodes[node1].x,2);
var y = Math.pow(nodes[node2].y - nodes[node1].y,2);
var dist = Math.sqrt(x+y);
return dist;
}
else return 0.0;
}
function tourDist(members){
var tourDist = 0.0;
if (members.length>1){
for (i = 1; i < members.length; i++)
tourDist += euclDist(members[i],members[i-1]);
}
return tourDist;
}
function combineTours(tourA, tourB){
tourA.pop();
tourB.shift();
return tourA.concat(tourB);
}
function calculateSaving(tourA,tourB){
var costSeparate = tourDist(tourA) + tourDist(tourB);
var combTour = combineTours(tourA,tourB);
var costCombined = tourDist(combTour);
return costSeparate - costCombined;
}
function calculateAllSavings(){
var allPossibilities = [];
for(var i = 0; i < tours.length; i++){
for(var j = 0; j < tours.length; j++){
if(i != j)
var savingObj = {saving:calculateSaving(tours[i],tours[j]), tourA: i, tourB: j};
allPossibilities.push(savingObj);
}
}
allPossibilities.sort(function(a, b){
return b.saving-a.saving
})
document.getElementById("demo3").innerHTML = "success";
return allPossibilities;
}
//Initialize Array
var tours = [];
tours.push([0,1,2,3,0]);
tours.push([0,4,5,6,0]);
tours.push([0,7,8,0]);
tours.push([0,9,10,0]);
//BUG
document.getElementById("demo1").innerHTML = tours.join('\n'); // Shows array correctly
var allSavings = calculateAllSavings(); //BUG APPEARS HERE
document.getElementById("demo2").innerHTML = tours.join('\n'); // Doesn't show anything
Edit Solved:
combine() was overwriting the original tours[].
by doing the combining with cloned tours, the original was left untouchted.
function combineTours(tourA, tourB){
var tour1 = tourA.slice(0);
var tour2 = tourB.slice(0);
tour1.pop();
tour2.shift();
return tour1.concat(tour2);
}
Thanks to everyone who helped me
Well, in combineTours function you're calling .pop() method on one array and .shift() method on another, which removes one element from each of these arrays. In calculateAllSavings you're calling calculateSaving in a loop and it's calling combineTours, so you're effectively removing all elements from the sub-arrays.
Maybe you should just remove these lines from combineTours:
tourA.pop();
tourB.shift();
For the future: use console.log() for debugging, it could help you identify the issue.
Can you try this?
for(var i = 0; i < tours.length; i++){
for(var j = 0; j < tours[i].length; j++){
if(i != j)
var savingObj = {saving:calculateSaving(tours[i],tours[j]), tourA: i, tourB: j};
allPossibilities.push(savingObj);
}
}
Apart from this, you can also debug and see if your document.getElementById("demo2").innerHTML = tours.join('\n'); line actually gets executed. You may be running an infinite loop. Try and debug your code using chrome developer tools.
I have a gigantic list (800 items) and one really long string. I want to get the first item in the array that matches the part of the string and stored in a variable.
My code currently:
for (var i = 0; i<gigantic_genre_array.length; i++) {
var test_genre = thelongstr.indexOf(gigantic_genre_array[i]);
if(test_genre != -1) {
tag1 = gigantic_genre_array[test_genre];
alert(tag1);
}
}
This doesn't work like I thought it would, any suggestions?
Try this:
for(var i = 0; i<gigantic_genre_array.length; i++){
var test_genre = thelongstr.indexOf(gigantic_genre_array[i]);
if(test_genre!=-1){
tag1 = gigantic_genre_array[i];
alert(tag1);
}
}
Do the process reversely it will be efficient too.
var wordArray = thelongstr.split(' ');
for(var i=0,len = wordArray.length; i < len; i++)
{
if(gigantic_genre_array.indexOf(wordArray[i]) > -1)
{
alert(wordArray[i]);
}
}
You may create a RegExp based on the array and test it against the string:
var gigantic_genre_array=['foo','bar','foobar'];
var thelongstr='where is the next bar';
alert(new RegExp(gigantic_genre_array.join('|')).exec(thelongstr)||[null][0]);
//returns bar