I have written code to block past dates and dates in the unavilabledates array, but only the second element of the array is blocked, rest are available for selection. Any idea how to figure it out?
var unavailableDates = ["6-3-2016", "5-28-2016", "5-27-2016", "6-28-2016"];
var nowTemp = new Date();
var now = new Date(nowTemp.getFullYear(), nowTemp.getMonth(), nowTemp.getDate(), 0, 0, 0, 0);
var checkin = $('#dpd1').datepicker({
onRender:function(date){
dmy = (date.getMonth() + 1) + "-" +date.getDate() + "-" + date.getFullYear();
return (date.valueOf() < now.valueOf() || ($.inArray(dmy, unavailableDates) == 1))?'disabled':'';
}
}
Output:// 5-28-2016 blocked , rest are not
I presume you use the jQuery UI Datepicker, use the beforeShowDay function instead of the onRender:
var unavailableDates = ["2016-03-06"]; // Dates formatted the same way as the beforeShowDay formatDate() function requires it
$('#dpd1').datepicker({
beforeShowDay: function(date){
var string = jQuery.datepicker.formatDate('yy-mm-dd', date);
return [ unavailableDates.indexOf(string) == -1 ]
},
minDate: 0
});
EDIT
I found the error, the formatDate('yy-mm-dd') in the beforeShowDay function checks for a 2016-05-25 date, while your provided array has dates like 6-3-2016. This is way the dates are not disabled.
See the updated code and a jsfiddle to go with it: https://jsfiddle.net/orttL83d/ (In this example I disabled 26th of May and all past dates)
So I have the following demo http://dev.driz.co.uk/week.html that shows a jQuery UI datepicker that has multiple instances for each month of the year.
I've modified it so that the user selects entire weeks and then start and end dates for those weeks are stored on the right hand sidebar with a week number.
What I want to do is disable the dates once the user has selected them so they can see on the calender picker what dates have been selected (and also prevent them from adding the same date range more than once).
However I don't know where to start with this... I've created some enable and disable date functions but don't know how to actually disable the dates using the beforeShowDay method.
For example:
var array = ["2013-03-14","2013-03-15","2013-03-16"]
$('.week-picker').datepicker({
beforeShowDay: function(date){
var string = jQuery.datepicker.formatDate('yy-mm-dd', date);
return [ array.indexOf(string) == -1 ]
}
});
But how would I disable a range of dates? As I only have the start and end dates. And can I call the beforeShowDay AFTER the datepicker is on the page like in my example? AND how can I then re-enable the dates?
Here's the code:
$(function() {
var startDate;
var endDate;
var selectCurrentWeek = function() {
window.setTimeout(function () {
$('.week-picker').find('.ui-datepicker-current-day a').addClass('ui-state-active');
}, 1);
}
$('.week-picker').datepicker( {
defaultDate: '01/01/2014',
minDate: '01/01/2013',
maxDate: '01/01/2015',
changeMonth: false,
changeYear: true,
showWeek: true,
showOtherMonths: true,
selectOtherMonths: true,
numberOfMonths: 12,
onSelect: function(dateText, inst) {
var date = $(this).datepicker('getDate');
startDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay());
endDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 6);
var dateFormat = inst.settings.dateFormat || $.datepicker._defaults.dateFormat;
addWeek($.datepicker.iso8601Week(new Date(dateText)), $.datepicker.formatDate( dateFormat, startDate, inst.settings ), $.datepicker.formatDate( dateFormat, endDate, inst.settings ));
disableDates( $.datepicker.formatDate( dateFormat, startDate, inst.settings ), $.datepicker.formatDate( dateFormat, endDate, inst.settings ));
selectCurrentWeek();
},
beforeShowDay: function(date) {
var cssClass = '';
if(date >= startDate && date <= endDate)
cssClass = 'ui-datepicker-current-day';
return [true, cssClass];
},
onChangeMonthYear: function(year, month, inst) {
selectCurrentWeek();
}
});
$('.week-picker .ui-datepicker-calendar tr').live('mousemove', function() { $(this).find('td a').addClass('ui-state-hover'); });
$('.week-picker .ui-datepicker-calendar tr').live('mouseleave', function() { $(this).find('td a').removeClass('ui-state-hover'); });
$('.remove').live('click', function(e){
enableDates($(this).attr('data-startdate'), $(this).attr('data-enddate'));
$(this).parent('div').remove();
});
});
// adds the week to the sidebar
function addWeek(weekNum, startDate, endDate){
$('.weeks-chosen').append('<div data-startdate="'+startDate+'" data-enddate="'+endDate+'"><span class="weekNum">Week '+ (weekNum - 1) +'</span> - <span class="startDate">'+startDate+'</span> - <span class="endDate">'+endDate+'</span> | <span class="remove">X Remove</span></div>');
}
// disable the dates on the calendar
function disableDates(startDate, endDate){
}
// enable the dates on the calendar
function enableDates(startDate, endDate){
}
In short there are two questions here... How do I disable dates AFTER the datepicker is added to the page. And second how do I disable a range between two dates, as it looks like the beforeShowDay method expects an array of dates rather than a range.
But how would I disable a range of dates? As I only have the start and
end dates.
One way could be to create an array of dates based on the start and end dates that you have. Use that array in beforeShowDay to disable the range.
Demo: http://jsfiddle.net/abhitalks/FAt66/1/
For example, Relevant portions of JS:
var startDate = "2014-06-15", // some start date
endDate = "2014-06-21", // some end date
dateRange = []; // array to hold the range
// populate the array
for (var d = new Date(startDate); d <= new Date(endDate); d.setDate(d.getDate() + 1)) {
dateRange.push($.datepicker.formatDate('yy-mm-dd', d));
}
// use this array
beforeShowDay: function (date) {
var dateString = jQuery.datepicker.formatDate('yy-mm-dd', date);
return [dateRange.indexOf(dateString) == -1];
}
Now, you could set startDate and endDate whenever a date is selected. In the example fiddle I linked to above, the start and end dates are set whenever a date is selected in the two top inputs. The data array is populated when date is selected in the second input.
Note: The above example is additive, i.e. everytime you select a new range it gets added as disabled dates into the target. If you want to clear the existing disabled range before specifying a new range, then you could do a destroy and reattach the datepicker. (And also reset the dateRange array)
Demo 2: http://jsfiddle.net/abhitalks/FAt66/3/
Relevant portion of JS:
$("#dt").datepicker("destroy");
$("#dt").datepicker({
dateFormat : 'yy-mm-dd',
beforeShowDay: disableDates
});
var disableDates = function(dt) {
var dateString = jQuery.datepicker.formatDate('yy-mm-dd', dt);
return [dateRange.indexOf(dateString) == -1];
}
Looking at your actual code, all you need is this:
onSelect: function(dateText, inst) {
var date = $(this).datepicker('getDate');
startDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay());
endDate = new Date(date.getFullYear(), date.getMonth(), date.getDate() - date.getDay() + 6);
var dateFormat = inst.settings.dateFormat || $.datepicker._defaults.dateFormat;
addWeek($.datepicker.iso8601Week(new Date(dateText)), $.datepicker.formatDate( dateFormat, startDate, inst.settings ), $.datepicker.formatDate( dateFormat, endDate, inst.settings ));
for (var d = new Date(startDate);
d <= new Date(endDate);
d.setDate(d.getDate() + 1)) {
dateRange.push($.datepicker.formatDate('dd/mm/yyyy', d));
}
selectCurrentWeek();
},
beforeShowDay: disableDates,
...
This will keep adding the newly selected date ranges to the array and will additively keep on disabling. But, be cautioned that you will need an escape route when an already selected week is removed. In that case, you may work with multiple array which can be coalesced into one master array.
If there is a requirement to disable a list of dates or like if in any reservation kind of projects where we have to disable some dates throughout the process. So you can use following code,
$(function() {
//This array containes all the disabled array
datesToBeDisabled = ["2019-03-25", "2019-03-28"];
$("#datepicker").datepicker({
changeMonth: true,
changeYear: true,
minDate : 0,
todayHighlight: 1,
beforeShowDay: function (date) {
var dateStr = jQuery.datepicker.formatDate('yy-mm-dd', date);
return [datesToBeDisabled.indexOf(dateStr) == -1];
},
});
});
I used all the solutions but not worked but i made change in common jquery.datepick.js
Exisiting _isSelectable constructor function
_isSelectable: function(elem, date, onDate, minDate, maxDate) {
var dateInfo = (typeof onDate === 'boolean' ? {selectable: onDate} :
(!$.isFunction(onDate) ? {} : onDate.apply(elem, [date, true])));
//This function is modified by Savata to Block fridays on homepage
return (dateInfo.selectable !== false) &&
(!minDate || date.getTime() >= minDate.getTime()) &&
(!maxDate || date.getTime() <= maxDate.getTime());
}
Changed to
_isSelectable: function(elem, date, onDate, minDate, maxDate) {
var dateInfo = (typeof onDate === 'boolean' ? {selectable: onDate} :
(!$.isFunction(onDate) ? {} : onDate.apply(elem, [date, true])));
return (dateInfo.selectable !== false) &&
(!minDate || date.getTime() >= minDate.getTime()) &&
(!maxDate || date.getTime() <= maxDate.getTime()) && date.getDay() != 5;
/*Added last condition date.getDay() != 5 to block friday
In your case change accordingly
for sunday = 0 to saturday = 6
*/ }
I want either the user can select a particular date or it can be filled up with say 'xyz'. I have tried using constrainInput = false but that allow user to enter anything. I only want the user can write or select only 'xyz'.
You can test the date input value:
$('#datepicker').datepicker({
constrainInput: false,
dateFormat: "dd/mm/yy"
}).on("change", function () {
// Accepts xyz as the value
if ($(this).val() == "xyz")
return true;
// Accepts just valid dates as the value
var comp = $(this).val().split('/');
var m = parseInt(comp[0], 10);
var d = parseInt(comp[1], 10);
var y = parseInt(comp[2], 10);
var date = new Date(y,m-1,d);
if (date.getFullYear() == y && date.getMonth() + 1 == m && date.getDate() == d)
return true;
alert("Wrong");
});
Test: http://jsfiddle.net/sFBn2/9/
If you want to select only one day, why not disable the input on the field and use only the datepicker with the day selection limited only to it?
Fot the disabled field use the attribute readonly of the input, for the datepicker day limitation use the beforeShowDay function.
HTML:
<input type='text' id='foo' readonly='true'>
jQuery:
$('#foo').datepicker({
constrainInput: false,
dateFormat: "dd/mm/yy",
beforeShowDay: function (date) {
var today=new Date();
if (date.getDate() == today.getDate()) {
return [true, ''];
}
return [false, ''];
}
});
Demo: http://jsfiddle.net/IrvinDominin/qdBkZ/
I have attempted to enable selection of only the first date of each month in a jQuery datepicker. The possible dates are listed in var enabledates.
var enabledDays = ["6-1-2013", "7-1-2013", "8-1-2013",
"9-1-2013", "10-1-2013", "11-1-2013"];
function nationalDays(date) {
var m = date.getMonth(), d = date.getDate(), y = date.getFullYear();
for (i = 0; i < enabledDays.length; i++) {
if($.inArray((m+1) + '-' + d + '-' + y, enabledDays) != -1
|| new Date() > date) {
return [true];
}
}
return [false];
}
$(function(){
$.datepicker.setDefaults($.extend($.datepicker.regional["ru"]));
$("#datepicker1, #datepicker2, #datepicker3").datepicker({
dateFormat: "yy-mm-dd",
duration: "normal",
numberOfMonths: [ 1, 2 ],
constrainInput: true,
beforeShowDay: nationalDays
});
});
How can I apply this first date constraint to the whole calendar?
If you just want to enable a range I would say you can use the Option properties minDate an maxDate.
Regarding your Problem to enable all Dates from an array. Please have a look at this fiddle http://jsfiddle.net/uYe9X/
function available(date) {
var dt= date.getDate() + "-" + (date.getMonth()+1) + "-" + date.getFullYear();
if (availableDates.indexOf(dt) !== -1) {
return [true, "","available"];
} else {
return [false,"","not available"];
}
}
As Pedro mentioned you could use the beforeShowDay Callback to reference a function which computes if the day should be enabled. The callback is used for every day which is displayed in the datepicker.
http://api.jqueryui.com/datepicker/#option-beforeShowDay
I'm using beforeShowDay to exclude holidays and weekends, however I want the beforeShowDays to be excluded when calculating the minDate.
E.g. if the current day of the week is friday and the minDate is 2, I want the weekend to be excluded from the equation. So instead of monday being the first date you can select, I want it to be wednesday.
This is my jQuery:
$( "#date" ).datepicker({
minDate: 2, maxDate: "+12M", // Date range
beforeShowDay: nonWorkingDates
});
Does anyone know how to do this?
How about something like this:
function includeDate(date) {
return date.getDay() !== 6 && date.getDay() !== 0;
}
function getTomorrow(date) {
return new Date(date.getFullYear(), date.getMonth(), date.getDate() + 1);
}
$("#date").datepicker({
beforeShowDay: function(date) {
return [includeDate(date)];
},
minDate: (function(min) {
var today = new Date();
var nextAvailable = getTomorrow(today);
var count = 0;
var newMin = 0; // Modified 'min' value
while(count < min) {
if (includeDate(nextAvailable)) {
count++;
}
newMin++; // Increase the new minimum
nextAvailable = getTomorrow(nextAvailable);
}
return newMin;
})(2) // Supply with the default minimum value.
});
Basically, figure out where the next valid date is, leveraging the method you've already defined for beforeShowDay. If my logic is correct (and you're only excluding weekends), this value can only be either 2 or 4: 2 If there are weekends in the way (Thurs. or Friday) and 2 if not.
It gets more complicated if you have other days you're excluding, but I think the logic still follows.
Here's the code on fiddle: http://jsfiddle.net/TpSLC/