I have a problem with _fnReDraw in DataTables, I am using DataTables and that receive data of the my controller C#, my controller return json with Exception or sucess, but my DataTables ReDraw only a first situation.
For exemplo, if firs moment my controller return Exception my Datatables Redraw only exception, but se first moment return sucess my dataTables ReDraw only sucess.
$.ajax({
type: "POST",
url: '#Url.Action("Action", "Controller")',
data: JSON.stringify(json),
datatype: "JSON",
async: true,
contentType: "application/json; charset=utf-8",
success: function(result) {
eval($('#MydatatTables').dataTable())._fnDraw();
},
});
As is said in the comments, there doesn't seem to be any reason for you eval().
It is hard to understand exactly what you are saying in your question, but are you receiving table data back from your ajax call? If so, you need to repopulate the table with the new data before calling a table refresh. Using the new datatables api), you would do something like this:
$.ajax({
type: "POST",
url: '#Url.Action("Action", "Controller")',
data: JSON.stringify(json),
datatype: "JSON",
async: true,
contentType: "application/json; charset=utf-8",
success: function(result) {
var dtApi = $('#MydataTables').DataTable();
dtApi.clear(); //clear old data from table
dtApi.rows.add(result);
dtApi.draw();
}
});
If you do not need to update the data, you can just leave out the clear and rows.add. Hope this helps.
Related
A web-service is available at http://www.cs.sun.ac.za/rw334/products.php?
limit=12&skip=0
I want to get the data in there into a Javascript array. I've searched around and I think I should start like this?
$.ajax({
type: "GET",
url: "http://www.cs.sun.ac.za/rw334/products.php?limit=12&skip=0",
data: {id:id, name:name,url:url},
contentType: "application/json",
dataType: "json",
success: ??
}
});
How should I continue to get this data from the .php file into a Javascript array?
product = [];
$.ajax({
type: "GET",
url: "http://www.cs.sun.ac.za/rw334/products.php?limit=12&skip=0",
dataType: "json",
success: function(data) {
$(data.products).each(function(i, products){
product[products.id] = products.name;
});
console.log(product);
}
});
I'm trying to post part of my Knockout viewmodel to our server using jQuery.Ajax.
When I build the data object it looks fine in the console, but when it gets sent via the jQuery Ajax Post the array within gets encoded. The results on the other end are readable by the server, so it works, but it disturbs me greatly (the payload is bigger for one thing).
Here's the code:
var items = $.map(self.Items(), function (item) {
return item.Key() ? {
Key: item.Key(),
PromoCode: item.PromoCode,
Qty: parseInt(item.Qty(), 10)
} : undefined;
}),
data = {
"InEditMode": true,
"Items": items
};
$.ajax({
url: '/api/order/',
type: 'POST',
data: data,
dataType: "json",
success: function (order) {
<snip>
The result as seen by FireBug is this.
Here's the decoded JSON Object
InEditMode true
Items[0][Key] 2730M0ARAX1111AAAAX0
Items[0][PromoCode]
Items[0][Qty] 3
Items[1][Key] 2730M0ARCX1111AAAAX0
Items[1][PromoCode]
Items[1][Qty] 5
Here's the Raw view
InEditMode=true&
Items%5B0%5D%5BKey%5D=2730M0ARAX1111AAAAX0&
Items%5B0%5D%5BPromoCode%5D=&
Items%5B0%5D%5BQty%5D=3&
Items%5B1%5D%5BKey%5D=2730M0ARCX1111AAAAX0&
Items%5B1%5D%5BPromoCode%5D=&
Items%5B1%5D%5BQty%5D=5
Like #codenoire said in his comment, you aren't specifying the content type. Add contentType: 'application/json; charset=utf-8' to your $.ajax call, like so:
$.ajax({
url: '/api/order/',
type: 'POST',
data: data,
dataType: "json",
contentType: 'application/json; charset=utf-8',
success: function (order) {
<snip>
I think you need to stringify your JSON object before you post it. Use JSON.stringify(data) before you post it.
I was so close! The answer is a combination of rwisch45 and Saeedses
I had already tried adding the contentType before, but that caused it to break and I hadn't pursued it any further then that.
the solution is to add the content type AND JSON.stringify it, as so.
$.ajax({
url: '/api/order/',
type: 'POST',
data: JSON.stringify(data),
dataType: "json",
contentType: 'application/json; charset=utf-8',
success: function (order) {
Thanks all for your help!
Trying the basic stuff,
request with data and response with data and print it with jQuery and Rails
This is the front code.
$("#internal_btn").click(function() {
//window.alert("clicked internal btn!");
$.ajax({
type: "POST",
contentType: "application/json; charset=utf-8",
url: "/room/test",
//data: "{'data1':'" + value1+ "', 'data2':'" + value2+ "', 'data3':'" + value3+ "'}",
data: {name:"ravi",age:"31"},
dataType: "json",
success: function (result) {
//do somthing here
window.alert("success!!");
},
error: function (){
window.alert("something wrong!");
}
});
});
in here, if the user clicks internal_btn this event happens and goes to the servide
room/test action.
ok this is fine. But I'm not sure how to send the data.
If i run this, i have an error like this.
MultiJson::LoadError
795: unexpected token at 'name=ravi&age=31'
Can i know what the problem is?
Also, is there are good example with this request and response with json format?
I googled a lot, but not satisfied with the result :(
Try to use stringify your data or use GET method like,
data : JSON.stringify({name:"ravi",age:"31"}),
Full Code,
$.ajax({
type: "POST",// GET in place of POST
contentType: "application/json; charset=utf-8",
url: "/room/test",
data : JSON.stringify({name:"ravi",age:"31"}),
dataType: "json",
success: function (result) {
//do somthing here
window.alert("success!!");
},
error: function (){
window.alert("something wrong!");
}
});
I am facing a problem with the JQuery ajax function.
I am trying to send a simple json through the ajax asshown below.
$.ajax({
url: 'NewFile.jsp',
type: 'GET',
data: {"datasource":"hello1", definition:[{val1:"hello3"}]},
contentType: 'application/json; charset=utf-8',
dataType: 'json',
async: false,
success: function(msg) {
alert("Successfully posted "+JSON.stringify(json));
}
});
The problem is that when I do
System.out.println(request.getParameter("datasource"));
System.out.println(request.getParameter("definition"));
in my NewFile.jsp then I get hello1 for the first and null for the second.
Why I get null value in the second println()?
Thanks
In the url variable inside your ajax object, give the full URL of your request. Like so:
$.ajax({
url: 'www.google.com/',
type: 'GET',
data: {"datasource":"hello1", definition:[{val1:"hello3"}]},
contentType: 'application/json; charset=utf-8',
dataType: 'json',
async: false,
success: function(msg) {
alert("Successfully posted "+JSON.stringify(json));
}
});
Also, always make sure that there is a failure variable inside your object literal, so that you know it happened, but failed. Helps with debugging.
I am having the below code in my project
$.ajax({
type: "POST",
url: "Alerts.aspx/TestMethod",
data: "{}",
contentType: "application/json; charset=utf-8",
dataType: "json",
success: OnSuccess,
error: OnError
});
now I want to pass the "this" or me(vb.net) as parameter in data object how to pass the current class object.
can any one help me
I tried data: "{obj:"<%=Me%>"}",
but it is not working can anyone help ...