Edges on arc, using Canvas - javascript

I am experimenting with drawing using javascript and the canvas element..my goal now is to draw a circle and gradually increase the opacity; I have this code:
http://codepen.io/anon/pen/zrVvOQ
Which seems to work, but the circle has rough edges; I found I need to clear the canvas each time the frame is redrawn, but the attempts I have made have not quite worked...any suggestions on how to?
window.onload = function draw(){
var frame1 = document.getElementById('frame1');
if (frame1.getContext){
var ctx = frame1.getContext('2d');
var centerX = frame1.width / 2;
var centerY = frame1.height / 2;
var radius = 50;
var alpha = 1.0;
/*call function over and over */
var requestAnimationFrame = window.requestAnimationFrame ||
window.mozRequestAnimationFrame ||
window.webkitRequestAnimationFrame ||
window.msRequestAnimationFrame;
var rendergreen = function()
{
var opacityValue = 0;
opacityValue += 0.03;
ctx.fillStyle = 'rgba(68,107,62, ' + opacityValue + ')';
animate();
ctx.arc(50, centerY, radius, 0, 2 * Math.PI, false);
ctx.clip();
ctx.fill();
ctx.closePath;
function animate() {
if (opacityValue < 1) {
opacityValue += 0.3;
} else {
opacityValue = 1;
}
}
requestAnimationFrame(rendergreen);
}
rendergreen();
}
}

You say the circle has "rough edges". That's pixellation and is inherent in using canvas to draw, which is a bit-mapped style of graphics. That means that you essentially can't get higher resolution than a single pixel. Contrast that with svg which is vector-based. An svg image can be magnified a thousand times and still have a smooth edge. I've shown an svg circle next to the canvas circle so that you can see the difference. It becomes much more apparent if you zoom in with your browser. There are pro's and con's to using canvas vs svg, too much to go into here, but it's worth looking into if you're really concerned.
In terms of changing the opacity of the circle, you've got several problems with your approach. With the way you've written it, you're actually not changing the opacity. Instead, you're drawing the same very transparent circle many times over top of each other so that by the end it looks opaque, giving the impression that you are gradually increasing the transparency of a single circle. Notice that you're setting your opacity to zero in each drawing iteration, then incrementing it to 0.05 (note that there are differences in the code in your question versus in the codepen that you linked to...I'm referring to the codepen version), then drawing it (so it will always be drawn at opacity 0.05), then further changing the value of the variable opacityValue which is never used in the drawing. The example below shows a relatively simple example of what I think you were trying to achieve. Note that I've deliberately made the 'clearRect' too small so that you can see how not clearing the canvas each time allows semi-transparent drawings to "pile up". This also allows you to see that the blockiness gets worse if you overlay many semi-transparent images. e.g. Compare the left and right sides of the canvas circle. The part of the circle that is cleared every time ends up looking smoother because of anti-aliasing, but the overlaid images have the smoothing effects of anti-aliasing effectively destroyed.
window.onload = function draw() {
var frame1 = document.getElementById('frame1');
if (frame1.getContext) {
var ctx = frame1.getContext('2d');
var opacityValue = 0;
var render = function() {
ctx.clearRect(0, 0, 80, 80); // deliberately set too small
ctx.beginPath();
opacityValue += 0.01;
ctx.fillStyle = 'rgba(68,107,62, ' + opacityValue + ')';
ctx.arc(60, 60, 50, 0, 2 * Math.PI, false);
ctx.fill();
ctx.closePath;
requestAnimationFrame(render);
}
render();
}
}
<canvas id="frame1" width="120" height="120"></canvas>
<svg width="120" height="120">
<circle cx="60" cy="60" r="50" fill="#446B3E"></circle>
</svg>

Related

Getting crisp pixel-perfect lines using HTML canvas [duplicate]

I'm playing around with the <canvas> element, drawing lines and such.
I've noticed that my diagonal lines are antialiased. I'd prefer the jaggy look for what I'm doing - is there any way of turning this feature off?
For images there's now context.imageSmoothingEnabled= false.
However, there's nothing that explicitly controls line drawing. You may need to draw your own lines (the hard way) using getImageData and putImageData.
Draw your 1-pixel lines on coordinates like ctx.lineTo(10.5, 10.5). Drawing a one-pixel line over the point (10, 10) means, that this 1 pixel at that position reaches from 9.5 to 10.5 which results in two lines that get drawn on the canvas.
A nice trick to not always need to add the 0.5 to the actual coordinate you want to draw over if you've got a lot of one-pixel lines, is to ctx.translate(0.5, 0.5) your whole canvas at the beginning.
It can be done in Mozilla Firefox. Add this to your code:
contextXYZ.mozImageSmoothingEnabled = false;
In Opera it's currently a feature request, but hopefully it will be added soon.
It must antialias vector graphics
Antialiasing is required for correct plotting of vector graphics that involves non-integer coordinates (0.4, 0.4), which all but very few clients do.
When given non-integer coordinates, the canvas has two options:
Antialias - paint the pixels around the coordinate based on how far the integer coordinate is from non-integer one (ie, the rounding error).
Round - apply some rounding function to the non-integer coordinate (so 1.4 will become 1, for example).
The later strategy will work for static graphics, although for small graphics (a circle with radius of 2) curves will show clear steps rather than a smooth curve.
The real problem is when the graphics is translated (moved) - the jumps between one pixel and another (1.6 => 2, 1.4 => 1), mean that the origin of the shape may jump with relation to the parent container (constantly shifting 1 pixel up/down and left/right).
Some tips
Tip #1: You can soften (or harden) antialiasing by scaling the canvas (say by x) then apply the reciprocal scale (1/x) to the geometries yourself (not using the canvas).
Compare (no scaling):
with (canvas scale: 0.75; manual scale: 1.33):
and (canvas scale: 1.33; manual scale: 0.75):
Tip #2: If a jaggy look is really what you're after, try to draw each shape a few times (without erasing). With each draw, the antialiasing pixels get darker.
Compare. After drawing once:
After drawing thrice:
Try something like canvas { image-rendering: pixelated; }.
This might not work if you're trying to only make one line not antialiased.
const canvas = document.querySelector("canvas");
const ctx = canvas.getContext("2d");
ctx.fillRect(4, 4, 2, 2);
canvas {
image-rendering: pixelated;
width: 100px;
height: 100px; /* Scale 10x */
}
<html>
<head></head>
<body>
<canvas width="10" height="10">Canvas unsupported</canvas>
</body>
</html>
I haven't tested this on many browsers though.
I would draw everything using a custom line algorithm such as Bresenham's line algorithm. Check out this javascript implementation:
http://members.chello.at/easyfilter/canvas.html
I think this will definitely solve your problems.
Adding this:
image-rendering: pixelated; image-rendering: crisp-edges;
to the style attribute of the canvas element helped to draw crisp pixels on the canvas. Discovered via this great article:
https://developer.mozilla.org/en-US/docs/Games/Techniques/Crisp_pixel_art_look
I discovered a better way to disable antialiasing on path / shape rendering using the context's filter property:
The magic / TL;DR:
ctx = canvas.getContext('2d');
// make canvas context render without antialiasing
ctx.filter = "url(data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjxmaWx0ZXIgaWQ9ImZpbHRlciIgeD0iMCIgeT0iMCIgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgY29sb3ItaW50ZXJwb2xhdGlvbi1maWx0ZXJzPSJzUkdCIj48ZmVDb21wb25lbnRUcmFuc2Zlcj48ZmVGdW5jUiB0eXBlPSJpZGVudGl0eSIvPjxmZUZ1bmNHIHR5cGU9ImlkZW50aXR5Ii8+PGZlRnVuY0IgdHlwZT0iaWRlbnRpdHkiLz48ZmVGdW5jQSB0eXBlPSJkaXNjcmV0ZSIgdGFibGVWYWx1ZXM9IjAgMSIvPjwvZmVDb21wb25lbnRUcmFuc2Zlcj48L2ZpbHRlcj48L3N2Zz4=#filter)";
Demystified:
The data url is a reference to an SVG containing a single filter:
<svg xmlns="http://www.w3.org/2000/svg">
<filter id="filter" x="0" y="0" width="100%" height="100%" color-interpolation-filters="sRGB">
<feComponentTransfer>
<feFuncR type="identity"/>
<feFuncG type="identity"/>
<feFuncB type="identity"/>
<feFuncA type="discrete" tableValues="0 1"/>
</feComponentTransfer>
</filter>
</svg>
Then at the very end of the url is an id reference to that #filter:
"url(data:image/svg+...Zz4=#filter)";
The SVG filter uses a discrete transform on the alpha channel, selecting only completely transparent or completely opaque on a 50% boundary when rendering. This can be tweaked to add some anti-aliasing back in if needed, e.g.:
...
<feFuncA type="discrete" tableValues="0 0 0.25 0.75 1"/>
...
Cons / Notes / Gotchas
Note, I didn't test this method with images, but I can presume it would affect semi-transparent parts of images. I can also guess that it probably would not prevent antialiasing on images at differing color boundaries. It isn't a 'nearest color' solution but rather a binary transparency solution. It seems to work best with path / shape rendering since alpha is the only channel antialiased with paths.
Also, using a minimum lineWidth of 1 is safe. Thinner lines become sparse or may often disappear completely.
Edit:
I've discovered that, in Firefox, setting filter to a dataurl does not work immediately / synchronously: the dataurl has to 'load' first.
e.g. The following will not work in Firefox:
ctx.filter = "url(data:image/svg+xml;base64,...#filter)";
ctx.beginPath();
ctx.moveTo(10,10);
ctx.lineTo(20,20);
ctx.strokeStyle = 'black';
ctx.lineWidth = 2;
ctx.stroke();
ctx.filter = "none";
But waiting till the next JS frame works fine:
ctx.filter = "url(data:image/svg+xml;base64,...#filter)";
setTimeout(() => {
ctx.beginPath();
ctx.moveTo(10,10);
ctx.lineTo(20,20);
ctx.strokeStyle = 'black';
ctx.lineWidth = 2;
ctx.stroke();
ctx.filter = "none";
}, 0);
I want to add that I had trouble when downsizing an image and drawing on canvas, it was still using smoothing, even though it wasn't using when upscaling.
I solved using this:
function setpixelated(context){
context['imageSmoothingEnabled'] = false; /* standard */
context['mozImageSmoothingEnabled'] = false; /* Firefox */
context['oImageSmoothingEnabled'] = false; /* Opera */
context['webkitImageSmoothingEnabled'] = false; /* Safari */
context['msImageSmoothingEnabled'] = false; /* IE */
}
You can use this function like this:
var canvas = document.getElementById('mycanvas')
setpixelated(canvas.getContext('2d'))
Maybe this is useful for someone.
ctx.translate(0.5, 0.5);
ctx.lineWidth = .5;
With this combo I can draw nice 1px thin lines.
While we still don't have proper shapeSmoothingEnabled or shapeSmoothingQuality options on the 2D context (I'll advocate for this and hope it makes its way in the near future), we now have ways to approximate a "no-antialiasing" behavior, thanks to SVGFilters, which can be applied to the context through its .filter property.
So, to be clear, it won't deactivate antialiasing per se, but provides a cheap way both in term of implementation and of performances (?, it should be hardware accelerated, which should be better than a home-made Bresenham on the CPU) in order to remove all semi-transparent pixels while drawing, but it may also create some blobs of pixels, and may not preserve the original input color.
For this we can use a <feComponentTransfer> node to grab only fully opaque pixels.
const canvas = document.getElementById("canvas");
const ctx = canvas.getContext("2d");
ctx.fillStyle = "#ABEDBE";
ctx.fillRect(0,0,canvas.width,canvas.height);
ctx.fillStyle = "black";
ctx.font = "14px sans-serif";
ctx.textAlign = "center";
// first without filter
ctx.fillText("no filter", 60, 20);
drawArc();
drawTriangle();
// then with filter
ctx.setTransform(1, 0, 0, 1, 120, 0);
ctx.filter = "url(#remove-alpha)";
// and do the same ops
ctx.fillText("no alpha", 60, 20);
drawArc();
drawTriangle();
// to remove the filter
ctx.filter = "none";
function drawArc() {
ctx.beginPath();
ctx.arc(60, 80, 50, 0, Math.PI * 2);
ctx.stroke();
}
function drawTriangle() {
ctx.beginPath();
ctx.moveTo(60, 150);
ctx.lineTo(110, 230);
ctx.lineTo(10, 230);
ctx.closePath();
ctx.stroke();
}
// unrelated
// simply to show a zoomed-in version
const zoomed = document.getElementById("zoomed");
const zCtx = zoomed.getContext("2d");
zCtx.imageSmoothingEnabled = false;
canvas.onmousemove = function drawToZoommed(e) {
const
x = e.pageX - this.offsetLeft,
y = e.pageY - this.offsetTop,
w = this.width,
h = this.height;
zCtx.clearRect(0,0,w,h);
zCtx.drawImage(this, x-w/6,y-h/6,w, h, 0,0,w*3, h*3);
}
<svg width="0" height="0" style="position:absolute;z-index:-1;">
<defs>
<filter id="remove-alpha" x="0" y="0" width="100%" height="100%">
<feComponentTransfer>
<feFuncA type="discrete" tableValues="0 1"></feFuncA>
</feComponentTransfer>
</filter>
</defs>
</svg>
<canvas id="canvas" width="250" height="250" ></canvas>
<canvas id="zoomed" width="250" height="250" ></canvas>
For the ones that don't like to append an <svg> element in their DOM, and who live in the near future (or with experimental flags on), the CanvasFilter interface we're working on should allow to do this without a DOM (so from Worker too):
if (!("CanvasFilter" in globalThis)) {
throw new Error("Not Supported", "Please enable experimental web platform features, or wait a bit");
}
const canvas = document.getElementById("canvas");
const ctx = canvas.getContext("2d");
ctx.fillStyle = "#ABEDBE";
ctx.fillRect(0,0,canvas.width,canvas.height);
ctx.fillStyle = "black";
ctx.font = "14px sans-serif";
ctx.textAlign = "center";
// first without filter
ctx.fillText("no filter", 60, 20);
drawArc();
drawTriangle();
// then with filter
ctx.setTransform(1, 0, 0, 1, 120, 0);
ctx.filter = new CanvasFilter([
{
filter: "componentTransfer",
funcA: {
type: "discrete",
tableValues: [ 0, 1 ]
}
}
]);
// and do the same ops
ctx.fillText("no alpha", 60, 20);
drawArc();
drawTriangle();
// to remove the filter
ctx.filter = "none";
function drawArc() {
ctx.beginPath();
ctx.arc(60, 80, 50, 0, Math.PI * 2);
ctx.stroke();
}
function drawTriangle() {
ctx.beginPath();
ctx.moveTo(60, 150);
ctx.lineTo(110, 230);
ctx.lineTo(10, 230);
ctx.closePath();
ctx.stroke();
}
// unrelated
// simply to show a zoomed-in version
const zoomed = document.getElementById("zoomed");
const zCtx = zoomed.getContext("2d");
zCtx.imageSmoothingEnabled = false;
canvas.onmousemove = function drawToZoommed(e) {
const
x = e.pageX - this.offsetLeft,
y = e.pageY - this.offsetTop,
w = this.width,
h = this.height;
zCtx.clearRect(0,0,w,h);
zCtx.drawImage(this, x-w/6,y-h/6,w, h, 0,0,w*3, h*3);
};
<canvas id="canvas" width="250" height="250" ></canvas>
<canvas id="zoomed" width="250" height="250" ></canvas>
Or you can also save the SVG as an external file and set the filter property to path/to/svg_file.svg#remove-alpha.
Notice a very limited trick. If you want to create a 2 colors image, you may draw any shape you want with color #010101 on a background with color #000000. Once this is done, you may test each pixel in the imageData.data[] and set to 0xFF whatever value is not 0x00 :
imageData = context2d.getImageData (0, 0, g.width, g.height);
for (i = 0; i != imageData.data.length; i ++) {
if (imageData.data[i] != 0x00)
imageData.data[i] = 0xFF;
}
context2d.putImageData (imageData, 0, 0);
The result will be a non-antialiased black & white picture. This will not be perfect, since some antialiasing will take place, but this antialiasing will be very limited, the color of the shape being very much like the color of the background.
Here is a basic implementation of Bresenham's algorithm in JavaScript. It's based on the integer-arithmetic version described in this wikipedia article: https://en.wikipedia.org/wiki/Bresenham%27s_line_algorithm
function range(f=0, l) {
var list = [];
const lower = Math.min(f, l);
const higher = Math.max(f, l);
for (var i = lower; i <= higher; i++) {
list.push(i);
}
return list;
}
//Don't ask me.
//https://en.wikipedia.org/wiki/Bresenham%27s_line_algorithm
function bresenhamLinePoints(start, end) {
let points = [];
if(start.x === end.x) {
return range(f=start.y, l=end.y)
.map(yIdx => {
return {x: start.x, y: yIdx};
});
} else if (start.y === end.y) {
return range(f=start.x, l=end.x)
.map(xIdx => {
return {x: xIdx, y: start.y};
});
}
let dx = Math.abs(end.x - start.x);
let sx = start.x < end.x ? 1 : -1;
let dy = -1*Math.abs(end.y - start.y);
let sy = start.y < end.y ? 1 : - 1;
let err = dx + dy;
let currX = start.x;
let currY = start.y;
while(true) {
points.push({x: currX, y: currY});
if(currX === end.x && currY === end.y) break;
let e2 = 2*err;
if (e2 >= dy) {
err += dy;
currX += sx;
}
if(e2 <= dx) {
err += dx;
currY += sy;
}
}
return points;
}
For those who still looking for answers. here is my solution.
Assumming image is 1 channel gray. I just thresholded after ctx.stroke().
ctx.beginPath();
ctx.moveTo(some_x, some_y);
ctx.lineTo(some_x, some_y);
...
ctx.closePath();
ctx.fill();
ctx.stroke();
let image = ctx.getImageData(0, 0, ctx.canvas.width, ctx.canvas.height)
for(let x=0; x < ctx.canvas.width; x++) {
for(let y=0; y < ctx.canvas.height; y++) {
if(image.data[x*image.height + y] < 128) {
image.data[x*image.height + y] = 0;
} else {
image.data[x*image.height + y] = 255;
}
}
}
if your image channel is 3 or 4. you need to modify the array index like
x*image.height*number_channel + y*number_channel + channel
Just two notes on StashOfCode's answer:
It only works for a grayscale, opaque canvas (fillRect with white then draw with black, or viceversa)
It may fail when lines are thin (~1px line width)
It's better to do this instead:
Stroke and fill with #FFFFFF, then do this:
imageData.data[i] = (imageData.data[i] >> 7) * 0xFF
That solves it for lines with 1px width.
Other than that, StashOfCode's solution is perfect because it doesn't require to write your own rasterization functions (think not only lines but beziers, circular arcs, filled polygons with holes, etc...)
According to MDN docs, Scaling for high resolution displays, "You may find that canvas items appear blurry on higher-resolution displays. While many solutions may exist, a simple first step is to scale the canvas size up and down simultaneously, using its attributes, styling, and its context's scale."
Ignoring the apparent paradox in their statement, this worked in my case, sharpening edges which had previously been unacceptably fuzzy.
// Get the DPR and size of the canvas
const dpr = window.devicePixelRatio;
const rect = canvas.getBoundingClientRect();
// Set the "actual" size of the canvas
canvas.width = rect.width * dpr;
canvas.height = rect.height * dpr;
// Scale the context to ensure correct drawing operations
ctx.scale(dpr, dpr);
// Set the "drawn" size of the canvas
canvas.style.width = `${rect.width}px`;
canvas.style.height = `${rect.height}px`;

HTML5 Canvas alpha transparency doesn't work in firefox for curves when window is big

I'm drawing a curve on an HTML5 canvas and am using alpha transparency to create a glow effect, by drawing a thicker version of the curve underneath with an alpha of less than 1, then drawing a thinner version of the curve on top (and I'm doing this with several levels of recursion).
Okay here's the problem. It works exactly the way I want it to in Chrome, giving a beautiful glow effect. But in Firefox, the alpha doesn't render properly if my browser dimensions are bigger than around 300px in height (yes that sounds crazy but it is actually what it is doing for some reason). If I resize my browser to be extremely tiny, then all the sudden the alpha works and I get my awesome glow. Once I make the window a reasonable size, the alpha no longer works so instead of a glowing line I just get a really thick line. :( Code is below.
HTML:
<body>
<canvas id="viewport">
<script type="text/javascript" src="scripts/render.js"></script>
</body>
CSS:
* {
background-color:#000000;
padding:0px;
margin:0px;
width:100%;
height:100%;
overflow:hidden;
}
#viewport {
border:0px;
}
Javascript:
window.viewport = document.getElementById("viewport");
window.context = viewport.getContext("2d");
window.xFactor = 1;
window.yFactor = 1;
function initializeViewport() {
maximizeViewport();
setFactors();
}
function maximizeViewport() {
viewport.width = window.innerWidth;
viewport.height = window.innerHeight;
}
function setFactors() {
xFactor = window.innerWidth / 100;
yFactor = window.innerHeight / 100;
}
function absX(x) {
return Math.floor(x * xFactor);
}
function absY(y) {
return Math.floor(y * yFactor);
}
function drawQuadraticCurve(startX, startY, controlX, controlY, endX, endY, lineWidth, gradient, alpha, glowiness, glowLevel) {
glowLevel = (typeof glowLevel === 'undefined') ? 0 : glowLevel;
// Draw the glow first
if (glowLevel < glowiness) {
drawQuadraticCurve(startX, startY, controlX, controlY, endX, endY, lineWidth + Math.sqrt(glowLevel), gradient, alpha*0.65, glowiness, glowLevel + 1);
}
// Then draw the curve
context.beginPath();
context.moveTo(absX(startX), absY(startY));
context.quadraticCurveTo(absX(controlX), absY(controlY), absX(endX), absY(endY));
context.lineWidth = lineWidth;
context.strokeStyle = gradient;
context.globalAlpha = alpha;
context.shadowColor = "#FFFFFF";
context.shadowBlur = 0;
context.shadowOffsetX = 0;
context.shadowOffsetY = 0;
context.stroke();
}
function createRadialGradient(colors, innerX, innerY, innerR, outerX, outerY, outerR) {
var gradient = context.createRadialGradient(absX(innerX),absY(innerY),Math.min(absX(innerR/2), absY(innerR/2)),absX(outerX),absY(outerY),Math.min(absX(outerR/2), absY(outerR/2)));
var gradientLength = colors.length;
for (i=0; i<gradientLength; i++) {
gradient.addColorStop(colors[i][0], colors[i][1]);
}
return gradient;
}
initializeViewport();
drawQuadraticCurve(80,65,20,70,70,10, 1,createRadialGradient([[0,"#FFFFFF"],[0.7,"#33CCFF"],[1,"#9944FF"]],50,50,1,50,50,90),1,8,0);
Screenshot of it working in Chrome: http://i.imgur.com/brVT2i6.png
Screenshot of it NOT working in Firefox: http://i.imgur.com/63Z4PJY.png
Screenshot of it working in Firefox after I've resized the window to be ridiculously small: http://i.imgur.com/d9AihEu.png
First working solution gets an upvote and a green checkmark! Yay!
Here is a glowing quadratic curve made up of small, individual line segments--each segment being a different color. A shadowColor equal to the segment color causes the glow. The rendering is compatible across browsers (including FF).
(You can control the linewidth and the glow strength)
var canvas=document.getElementById("canvas");
var ctx=canvas.getContext("2d");
var cw=canvas.width;
var ch=canvas.height;
// variables to define colors -- use hsl instead of rgb
var hue=10;
var hueShift=4;
// define the quadratic curve
var startPt={x:350,y:100};
var controlPt={x:0,y:250};
var endPt={x:350,y:400};
// variables defining the starting & ending point of
// the current line segment.
var newXY=startPt;
var oldXY=startPt;
// the current interval along the quadratic curve
// (used to calc an x,y along the curve)
// (t is kind-of like a percentage along the curve--kind of but not)
var t=0;
// the unshadowed linewidth
ctx.lineWidth=1;
// the shadow to apply around the line
ctx.shadowBlur=7;
// round the endcaps to visually blend the line segments
ctx.lineCap='round';
// start with a black-filled canvas
ctx.fillStyle='black';
ctx.fillRect(0,0,cw,ch);
// start the animation
requestAnimationFrame(animate);
function animate(time){
// calculate a new x,y along the curve
var T=t/100;
var newXY=getQuadraticBezierXYatT(startPt,controlPt,endPt,T);
// change the color for this segment
hue=(hue+hueShift)%360;
// draw this line segment with a shadow-glow
glowLine(oldXY,newXY,hue);
// set old=new in preparation for the next loop
oldXY=newXY;
// request another animation loop intil reaching 100
if(++t<100){
requestAnimationFrame(animate);
}
}
function glowLine(oldXY,newXY,hue){
// calculate the hsl color given the new hue
var hsl="hsl(" + (hue % 360) + ",99%,50%)";
// draw a glowing line segment
// (==a line segment with a shadow of the same color as the line segment)
ctx.beginPath();
ctx.moveTo(oldXY.x,oldXY.y);
ctx.lineTo(newXY.x,newXY.y);
ctx.fillStyle= hsl
ctx.strokeStyle=hsl;
ctx.shadowColor=hsl;
// overdraw the line segment so it really stands out
for(var i=0;i<6;i++){
ctx.stroke();
}
}
// calculate an [x,y] along a quadratic curve given an interval T
function getQuadraticBezierXYatT(startPt,controlPt,endPt,T) {
var x = Math.pow(1-T,2) * startPt.x + 2 * (1-T) * T * controlPt.x + Math.pow(T,2) * endPt.x;
var y = Math.pow(1-T,2) * startPt.y + 2 * (1-T) * T * controlPt.y + Math.pow(T,2) * endPt.y;
return( {x:x,y:y} );
}
body{ background-color:ivory; padding:10px; }
#canvas{border:1px solid red;}
<canvas id="canvas" width=500 height=500></canvas>
This is really a comment, but it wouldn't fit in the space allocated to a comment. :-)
I've consulted the All-Knowing-Oracle of Html5 Canvas--the w3.org.
If you assign a zero shadowBlur (as you do) the spec says there should be no shadow applied.
That means that FF with the larger canvas size is correctly applying the w3 standard (not drawing any shadow) and both Chrome & FF(smaller version) are incorrectly applying a shadow when it should not.
http://www.w3.org/TR/2dcontext/
Shadows are only drawn if the opacity component of the alpha component
of the color of shadowColor is non-zero and either the shadowBlur is
non-zero, or the shadowOffsetX is non-zero, or the shadowOffsetY is
non-zero.
Therefore, to have cross-browser compatibility, you mustn't rely on quirks in the rendering when shadowBlur=0. You must create your glow in another way within the "rules".

Use setInterval to infinitely draw rectangles

I'm trying to learn how to learn basic animation using ONLY canvas with the setInterval function.
I'm trying to draw a simple rectangle to the screen and move it to the right 1 pixel every 100 milliseconds. However when I do it paints over the previous rectangle. I called clearRect() but that doesn't seem to do anything.
How can I make this rectangle smoothly travel across the screen without leaving a trail?
Also if there is a better way to do this rather than using clearRect() and translate() please do share.
var ctx = document.getElementById('mycanvas').getContext('2d');
var a = setInterval(draw,100);
var x = 50;
function draw()
{
ctx.clearRect(0,0,300,300);
ctx.translate(1,0);
ctx.rect(x,50,50,50);
ctx.stroke();
}
You can do it two different ways:
You can continue to use rect() and stroke(), but you need to call beginPath() beforehand. When you call methods like rect(), a list, called the "path," is kept of all of the shapes, or "subpaths," that you've created. Then, when you call stroke(), the entire path is drawn. Thus, even if you clear the screen, all of the past rectangles are still remembered in the path, and drawn again. beginPath() clears that list.
var x = 50;
function draw() {
ctx.clearRect(0, 0, 300, 300);
ctx.beginPath();
ctx.rect(x, 50, 50, 50);
ctx.stroke();
x++;
}
Or, you can combine the rect() and stroke() into one line, and not need to call beginPath(). That's because the rectangle is both created and drawn at the same time, and isn't put in the list.
var x = 50;
function draw() {
ctx.clearRect(0, 0, 300, 300);
ctx.strokeRect(x, 50, 50, 50);
x++;
}
Either way, I advise incrementing x instead of using translate(), because translate() basically moves the imaginary "pen" that is drawing on the canvas. So if you translate(50, 50), and then you try to draw a rectangle at (0, 0) on the canvas, it will actually be at (50, 50).
As Microsoft puts it on MSDN, "The translate method effectively remaps the (0,0) origin on a canvas."
If you repeatedly do that, it will become difficult to keep track of where you're actually drawing.
Your x variable never changes, so your shape will not move. You need to increment x to get movement:
var x = 50;
function draw(){
ctx.clearRect(0,0,300,300);
ctx.translate(1,0);
ctx.rect(x,50,50,50);
ctx.stroke();
x++;
}
In order to get a smooth animation with shapes and other sprites moving across the screen (or even staying still) it would be better to make a clearScreen method that will basically draw over the entire canvas in whatever background color the canvas is. It is basically just a function that will draw a white (or whatever background color you are using) rectangle over the entire canvas. Then, you call the draw function that will make all the necessary drawings. That way, there won't be any trail or anything of the past movements and you won't have to call clearRect() on every single rectangle you make.
Basically, the function will erase the canvas and you can redraw whatever you need to in order to make the animation of the box moving across the screen.
Does that make sense?
EDIT:
Also, to be clear, you would make your own clearScreen method based on what size your canvas is and what color your background is. Its not hard, all it does is draw a rectangle over the screen.
Simply increment x on every call:
var canvas = document.getElementById('mycanvas')
var ctx = canvas.getContext('2d');
var a = setInterval(draw,100);
var x = 50;
function draw(){
canvas.width = canvas.width; // clears the canvas
ctx.rect(x++,50,50,50);
ctx.stroke();
if (x > 250) // resets the position
x = 50;
}
<canvas id="mycanvas"></canvas>
I also removed that translation since there's no need to do it just for the square animation.
Try beginPath() and closePath():
var maxX, x = 0,
s = 50,
maxY;
var repaint = function(ctx) {
if (x + s >= maxX) { //reached end of the canvas
return;
}
ctx.clearRect(0, 0, maxX, maxY); //clear previous
ctx.beginPath(); //start drawing
ctx.rect(x, s, s, s);
ctx.stroke();
ctx.closePath(); //stop drawing
x++;
setTimeout(function() {
repaint(ctx); //continue here
}, 100);
};
var cnvs = document.getElementById('canvas');
maxX = cnvs.width;
maxY = cnvs.height;
repaint(cnvs.getContext('2d'));
canvas {
border: 1px solid grey;
}
<canvas width="360" height="180" id='canvas'>HTML5 canvas not supported</canvas>

cancelAnimationFrame for Animation on Javascript

Hello I'm trying to create a rectangle that grows from the side of the canvas until it fills the whole canvas, once it has done that shrink back to is original state, the approach I'm taking is using requestAnimationFrame /cancelAnimationFrame for some reason I'm not sure cancelAnimationFrame does not seem to work my code is the following one :
<script>
function grRectangle(){
var canvas = document.getElementById("paper");
var context= canvas.getContext("2d");
//var forpi = Math.PI * 2;
//context.fillStyle = "black";
context.fillRect(0,0,canvas.width,canvas.height);
var posX = 200;
var posY = 100;
var color = 0;
function draw(){
context.fillStyle = 'hsl('+ color++ + ',100%,50%)';
context.beginPath();
context.rect(0,0,posX,posY);
context.fill();
posX = posX + 0.9;
posY = posY + 0.9;
if(posX < canvas.width ){
requestAnimationFrame(draw);
} if (posX >= canvas.width){
posX = posX - 0.9;
posY = posY - 0.9;
cancelAnimationFrame(draw);
}
}
draw();
};
</script>
<body onload= "grRectangle();" >
<h1>Growing Rectangle</h1>
<canvas id = "paper" width="800" height="600">
</canvas>
Any help is kindly appreciatted
It seems to me like the code you wrote doesn't actually need a cancelAnimationFrame. I am not sure what you think it does exactly, but it seems like you misunderstood it.
The cancelAnimationFrame method is used to prevent a previous call to requestAnimationFrame from getting executed, as long as this didn't happen yet. There are really few situations where you need this.
In your case I would put that growth-per-frame constant of 0.9 into a variable. When the rectangle size reaches the upper bound, just change it to -0.9 and it will get smaller again. When it reaches the lower bound, change it again to 0.9 and it will grow again.
You will, however, not see that shrinking, because you aren't erasing your canvas. Every frame is drawn on top of the previous one. You will have to erase your canvas at the beginning of your drawing loop. To do that, move the code which fills the canvas with a black rectangle into the drawing loop (remember to set the fill-style to black).

Can I turn off antialiasing on an HTML <canvas> element?

I'm playing around with the <canvas> element, drawing lines and such.
I've noticed that my diagonal lines are antialiased. I'd prefer the jaggy look for what I'm doing - is there any way of turning this feature off?
For images there's now context.imageSmoothingEnabled= false.
However, there's nothing that explicitly controls line drawing. You may need to draw your own lines (the hard way) using getImageData and putImageData.
Draw your 1-pixel lines on coordinates like ctx.lineTo(10.5, 10.5). Drawing a one-pixel line over the point (10, 10) means, that this 1 pixel at that position reaches from 9.5 to 10.5 which results in two lines that get drawn on the canvas.
A nice trick to not always need to add the 0.5 to the actual coordinate you want to draw over if you've got a lot of one-pixel lines, is to ctx.translate(0.5, 0.5) your whole canvas at the beginning.
It can be done in Mozilla Firefox. Add this to your code:
contextXYZ.mozImageSmoothingEnabled = false;
In Opera it's currently a feature request, but hopefully it will be added soon.
It must antialias vector graphics
Antialiasing is required for correct plotting of vector graphics that involves non-integer coordinates (0.4, 0.4), which all but very few clients do.
When given non-integer coordinates, the canvas has two options:
Antialias - paint the pixels around the coordinate based on how far the integer coordinate is from non-integer one (ie, the rounding error).
Round - apply some rounding function to the non-integer coordinate (so 1.4 will become 1, for example).
The later strategy will work for static graphics, although for small graphics (a circle with radius of 2) curves will show clear steps rather than a smooth curve.
The real problem is when the graphics is translated (moved) - the jumps between one pixel and another (1.6 => 2, 1.4 => 1), mean that the origin of the shape may jump with relation to the parent container (constantly shifting 1 pixel up/down and left/right).
Some tips
Tip #1: You can soften (or harden) antialiasing by scaling the canvas (say by x) then apply the reciprocal scale (1/x) to the geometries yourself (not using the canvas).
Compare (no scaling):
with (canvas scale: 0.75; manual scale: 1.33):
and (canvas scale: 1.33; manual scale: 0.75):
Tip #2: If a jaggy look is really what you're after, try to draw each shape a few times (without erasing). With each draw, the antialiasing pixels get darker.
Compare. After drawing once:
After drawing thrice:
Try something like canvas { image-rendering: pixelated; }.
This might not work if you're trying to only make one line not antialiased.
const canvas = document.querySelector("canvas");
const ctx = canvas.getContext("2d");
ctx.fillRect(4, 4, 2, 2);
canvas {
image-rendering: pixelated;
width: 100px;
height: 100px; /* Scale 10x */
}
<html>
<head></head>
<body>
<canvas width="10" height="10">Canvas unsupported</canvas>
</body>
</html>
I haven't tested this on many browsers though.
I would draw everything using a custom line algorithm such as Bresenham's line algorithm. Check out this javascript implementation:
http://members.chello.at/easyfilter/canvas.html
I think this will definitely solve your problems.
Adding this:
image-rendering: pixelated; image-rendering: crisp-edges;
to the style attribute of the canvas element helped to draw crisp pixels on the canvas. Discovered via this great article:
https://developer.mozilla.org/en-US/docs/Games/Techniques/Crisp_pixel_art_look
I discovered a better way to disable antialiasing on path / shape rendering using the context's filter property:
The magic / TL;DR:
ctx = canvas.getContext('2d');
// make canvas context render without antialiasing
ctx.filter = "url(data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjxmaWx0ZXIgaWQ9ImZpbHRlciIgeD0iMCIgeT0iMCIgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgY29sb3ItaW50ZXJwb2xhdGlvbi1maWx0ZXJzPSJzUkdCIj48ZmVDb21wb25lbnRUcmFuc2Zlcj48ZmVGdW5jUiB0eXBlPSJpZGVudGl0eSIvPjxmZUZ1bmNHIHR5cGU9ImlkZW50aXR5Ii8+PGZlRnVuY0IgdHlwZT0iaWRlbnRpdHkiLz48ZmVGdW5jQSB0eXBlPSJkaXNjcmV0ZSIgdGFibGVWYWx1ZXM9IjAgMSIvPjwvZmVDb21wb25lbnRUcmFuc2Zlcj48L2ZpbHRlcj48L3N2Zz4=#filter)";
Demystified:
The data url is a reference to an SVG containing a single filter:
<svg xmlns="http://www.w3.org/2000/svg">
<filter id="filter" x="0" y="0" width="100%" height="100%" color-interpolation-filters="sRGB">
<feComponentTransfer>
<feFuncR type="identity"/>
<feFuncG type="identity"/>
<feFuncB type="identity"/>
<feFuncA type="discrete" tableValues="0 1"/>
</feComponentTransfer>
</filter>
</svg>
Then at the very end of the url is an id reference to that #filter:
"url(data:image/svg+...Zz4=#filter)";
The SVG filter uses a discrete transform on the alpha channel, selecting only completely transparent or completely opaque on a 50% boundary when rendering. This can be tweaked to add some anti-aliasing back in if needed, e.g.:
...
<feFuncA type="discrete" tableValues="0 0 0.25 0.75 1"/>
...
Cons / Notes / Gotchas
Note, I didn't test this method with images, but I can presume it would affect semi-transparent parts of images. I can also guess that it probably would not prevent antialiasing on images at differing color boundaries. It isn't a 'nearest color' solution but rather a binary transparency solution. It seems to work best with path / shape rendering since alpha is the only channel antialiased with paths.
Also, using a minimum lineWidth of 1 is safe. Thinner lines become sparse or may often disappear completely.
Edit:
I've discovered that, in Firefox, setting filter to a dataurl does not work immediately / synchronously: the dataurl has to 'load' first.
e.g. The following will not work in Firefox:
ctx.filter = "url(data:image/svg+xml;base64,...#filter)";
ctx.beginPath();
ctx.moveTo(10,10);
ctx.lineTo(20,20);
ctx.strokeStyle = 'black';
ctx.lineWidth = 2;
ctx.stroke();
ctx.filter = "none";
But waiting till the next JS frame works fine:
ctx.filter = "url(data:image/svg+xml;base64,...#filter)";
setTimeout(() => {
ctx.beginPath();
ctx.moveTo(10,10);
ctx.lineTo(20,20);
ctx.strokeStyle = 'black';
ctx.lineWidth = 2;
ctx.stroke();
ctx.filter = "none";
}, 0);
I want to add that I had trouble when downsizing an image and drawing on canvas, it was still using smoothing, even though it wasn't using when upscaling.
I solved using this:
function setpixelated(context){
context['imageSmoothingEnabled'] = false; /* standard */
context['mozImageSmoothingEnabled'] = false; /* Firefox */
context['oImageSmoothingEnabled'] = false; /* Opera */
context['webkitImageSmoothingEnabled'] = false; /* Safari */
context['msImageSmoothingEnabled'] = false; /* IE */
}
You can use this function like this:
var canvas = document.getElementById('mycanvas')
setpixelated(canvas.getContext('2d'))
Maybe this is useful for someone.
ctx.translate(0.5, 0.5);
ctx.lineWidth = .5;
With this combo I can draw nice 1px thin lines.
While we still don't have proper shapeSmoothingEnabled or shapeSmoothingQuality options on the 2D context (I'll advocate for this and hope it makes its way in the near future), we now have ways to approximate a "no-antialiasing" behavior, thanks to SVGFilters, which can be applied to the context through its .filter property.
So, to be clear, it won't deactivate antialiasing per se, but provides a cheap way both in term of implementation and of performances (?, it should be hardware accelerated, which should be better than a home-made Bresenham on the CPU) in order to remove all semi-transparent pixels while drawing, but it may also create some blobs of pixels, and may not preserve the original input color.
For this we can use a <feComponentTransfer> node to grab only fully opaque pixels.
const canvas = document.getElementById("canvas");
const ctx = canvas.getContext("2d");
ctx.fillStyle = "#ABEDBE";
ctx.fillRect(0,0,canvas.width,canvas.height);
ctx.fillStyle = "black";
ctx.font = "14px sans-serif";
ctx.textAlign = "center";
// first without filter
ctx.fillText("no filter", 60, 20);
drawArc();
drawTriangle();
// then with filter
ctx.setTransform(1, 0, 0, 1, 120, 0);
ctx.filter = "url(#remove-alpha)";
// and do the same ops
ctx.fillText("no alpha", 60, 20);
drawArc();
drawTriangle();
// to remove the filter
ctx.filter = "none";
function drawArc() {
ctx.beginPath();
ctx.arc(60, 80, 50, 0, Math.PI * 2);
ctx.stroke();
}
function drawTriangle() {
ctx.beginPath();
ctx.moveTo(60, 150);
ctx.lineTo(110, 230);
ctx.lineTo(10, 230);
ctx.closePath();
ctx.stroke();
}
// unrelated
// simply to show a zoomed-in version
const zoomed = document.getElementById("zoomed");
const zCtx = zoomed.getContext("2d");
zCtx.imageSmoothingEnabled = false;
canvas.onmousemove = function drawToZoommed(e) {
const
x = e.pageX - this.offsetLeft,
y = e.pageY - this.offsetTop,
w = this.width,
h = this.height;
zCtx.clearRect(0,0,w,h);
zCtx.drawImage(this, x-w/6,y-h/6,w, h, 0,0,w*3, h*3);
}
<svg width="0" height="0" style="position:absolute;z-index:-1;">
<defs>
<filter id="remove-alpha" x="0" y="0" width="100%" height="100%">
<feComponentTransfer>
<feFuncA type="discrete" tableValues="0 1"></feFuncA>
</feComponentTransfer>
</filter>
</defs>
</svg>
<canvas id="canvas" width="250" height="250" ></canvas>
<canvas id="zoomed" width="250" height="250" ></canvas>
For the ones that don't like to append an <svg> element in their DOM, and who live in the near future (or with experimental flags on), the CanvasFilter interface we're working on should allow to do this without a DOM (so from Worker too):
if (!("CanvasFilter" in globalThis)) {
throw new Error("Not Supported", "Please enable experimental web platform features, or wait a bit");
}
const canvas = document.getElementById("canvas");
const ctx = canvas.getContext("2d");
ctx.fillStyle = "#ABEDBE";
ctx.fillRect(0,0,canvas.width,canvas.height);
ctx.fillStyle = "black";
ctx.font = "14px sans-serif";
ctx.textAlign = "center";
// first without filter
ctx.fillText("no filter", 60, 20);
drawArc();
drawTriangle();
// then with filter
ctx.setTransform(1, 0, 0, 1, 120, 0);
ctx.filter = new CanvasFilter([
{
filter: "componentTransfer",
funcA: {
type: "discrete",
tableValues: [ 0, 1 ]
}
}
]);
// and do the same ops
ctx.fillText("no alpha", 60, 20);
drawArc();
drawTriangle();
// to remove the filter
ctx.filter = "none";
function drawArc() {
ctx.beginPath();
ctx.arc(60, 80, 50, 0, Math.PI * 2);
ctx.stroke();
}
function drawTriangle() {
ctx.beginPath();
ctx.moveTo(60, 150);
ctx.lineTo(110, 230);
ctx.lineTo(10, 230);
ctx.closePath();
ctx.stroke();
}
// unrelated
// simply to show a zoomed-in version
const zoomed = document.getElementById("zoomed");
const zCtx = zoomed.getContext("2d");
zCtx.imageSmoothingEnabled = false;
canvas.onmousemove = function drawToZoommed(e) {
const
x = e.pageX - this.offsetLeft,
y = e.pageY - this.offsetTop,
w = this.width,
h = this.height;
zCtx.clearRect(0,0,w,h);
zCtx.drawImage(this, x-w/6,y-h/6,w, h, 0,0,w*3, h*3);
};
<canvas id="canvas" width="250" height="250" ></canvas>
<canvas id="zoomed" width="250" height="250" ></canvas>
Or you can also save the SVG as an external file and set the filter property to path/to/svg_file.svg#remove-alpha.
Notice a very limited trick. If you want to create a 2 colors image, you may draw any shape you want with color #010101 on a background with color #000000. Once this is done, you may test each pixel in the imageData.data[] and set to 0xFF whatever value is not 0x00 :
imageData = context2d.getImageData (0, 0, g.width, g.height);
for (i = 0; i != imageData.data.length; i ++) {
if (imageData.data[i] != 0x00)
imageData.data[i] = 0xFF;
}
context2d.putImageData (imageData, 0, 0);
The result will be a non-antialiased black & white picture. This will not be perfect, since some antialiasing will take place, but this antialiasing will be very limited, the color of the shape being very much like the color of the background.
Here is a basic implementation of Bresenham's algorithm in JavaScript. It's based on the integer-arithmetic version described in this wikipedia article: https://en.wikipedia.org/wiki/Bresenham%27s_line_algorithm
function range(f=0, l) {
var list = [];
const lower = Math.min(f, l);
const higher = Math.max(f, l);
for (var i = lower; i <= higher; i++) {
list.push(i);
}
return list;
}
//Don't ask me.
//https://en.wikipedia.org/wiki/Bresenham%27s_line_algorithm
function bresenhamLinePoints(start, end) {
let points = [];
if(start.x === end.x) {
return range(f=start.y, l=end.y)
.map(yIdx => {
return {x: start.x, y: yIdx};
});
} else if (start.y === end.y) {
return range(f=start.x, l=end.x)
.map(xIdx => {
return {x: xIdx, y: start.y};
});
}
let dx = Math.abs(end.x - start.x);
let sx = start.x < end.x ? 1 : -1;
let dy = -1*Math.abs(end.y - start.y);
let sy = start.y < end.y ? 1 : - 1;
let err = dx + dy;
let currX = start.x;
let currY = start.y;
while(true) {
points.push({x: currX, y: currY});
if(currX === end.x && currY === end.y) break;
let e2 = 2*err;
if (e2 >= dy) {
err += dy;
currX += sx;
}
if(e2 <= dx) {
err += dx;
currY += sy;
}
}
return points;
}
For those who still looking for answers. here is my solution.
Assumming image is 1 channel gray. I just thresholded after ctx.stroke().
ctx.beginPath();
ctx.moveTo(some_x, some_y);
ctx.lineTo(some_x, some_y);
...
ctx.closePath();
ctx.fill();
ctx.stroke();
let image = ctx.getImageData(0, 0, ctx.canvas.width, ctx.canvas.height)
for(let x=0; x < ctx.canvas.width; x++) {
for(let y=0; y < ctx.canvas.height; y++) {
if(image.data[x*image.height + y] < 128) {
image.data[x*image.height + y] = 0;
} else {
image.data[x*image.height + y] = 255;
}
}
}
if your image channel is 3 or 4. you need to modify the array index like
x*image.height*number_channel + y*number_channel + channel
Just two notes on StashOfCode's answer:
It only works for a grayscale, opaque canvas (fillRect with white then draw with black, or viceversa)
It may fail when lines are thin (~1px line width)
It's better to do this instead:
Stroke and fill with #FFFFFF, then do this:
imageData.data[i] = (imageData.data[i] >> 7) * 0xFF
That solves it for lines with 1px width.
Other than that, StashOfCode's solution is perfect because it doesn't require to write your own rasterization functions (think not only lines but beziers, circular arcs, filled polygons with holes, etc...)
According to MDN docs, Scaling for high resolution displays, "You may find that canvas items appear blurry on higher-resolution displays. While many solutions may exist, a simple first step is to scale the canvas size up and down simultaneously, using its attributes, styling, and its context's scale."
Ignoring the apparent paradox in their statement, this worked in my case, sharpening edges which had previously been unacceptably fuzzy.
// Get the DPR and size of the canvas
const dpr = window.devicePixelRatio;
const rect = canvas.getBoundingClientRect();
// Set the "actual" size of the canvas
canvas.width = rect.width * dpr;
canvas.height = rect.height * dpr;
// Scale the context to ensure correct drawing operations
ctx.scale(dpr, dpr);
// Set the "drawn" size of the canvas
canvas.style.width = `${rect.width}px`;
canvas.style.height = `${rect.height}px`;

Categories