I have a layer group consisting of 3 layers and named for example: group1.
I want to produce an array of the names of the layers that are in this group. I'm actually doing that:
group1.getLayers().getArray()
I'm reaching the level of the ol.layer.vector, but I can't seem to find how to access the value of the name propertie.
My guess was to do add a .get("name") after the getArray() but it doesn't work (I guess you can't call more than 2 methods). I also tried stocking the results of the getArray() in a variable, but then I can't do a get("name") on the variable.
How can I access my layers name ?
Edit: Looks like I can use the getLayersArray() method also, but I'm stuck with the same problem.
Ok I found my answer.
function getNames(dom){
var stock = [];
var layer_names = [];
stock = dom.getLayersArray();
for(i=0;i<stock.length;i++){
layer_names[i] = stock[i].get("name");
};
return layer_names;
}
Thanks to #1saac .
Edit: Pushed it a little to add properties keys of each layer:
function getNames(domaine){
var r_stock = [];
var r_layers = [];
r_stock = domaine.getLayersArray();
for(i=0;i<r_stock.length;i++){
feat_source = r_stock[i].getSource();
feat_get = feat_source.getFeatures();
prop_feature[i] = feat_get[0].getKeys();
r_layers[i] = ["name", r_stock[i].get("name")];
for(j=0;j<prop_feature[i].length;j++){
r_layers[i].push("id" + j, prop_feature[i][j])
};
};
return r_layers;
};
Related
I tried a lot searching and didnt get desired solutions.
What I want to achieve is
var myObject {
id1 : {
name:place_name,
location : place_loc
},
id2 : {
name:place_name,
location : place_loc
},
id3 : {
name:place_name,
location : place_loc
}
}
What I want to do is that Initially I want the properties "id1", "id2".. to be dynamic. And then dynamically assign name:place_name and other properties of each property.
I dont know the number of properties (id1,id2,id3...) hence would like to add them dynamically and following the addition of properties(id1,id2... ) I want to dynamically add the property values. (place_name & place_loc) of each id.
My code looks something like this.
var myObject = {};
myObject[idnumber1].place = "SomePlace1";
myObject[idnumber1].place = "SomeLoc1";
myObject[idnumber2].place = "SomePlace1";
myObject[idnumber2].place = "SomeLoc1";
But it gives error.
I know it seems simple doubt but any help would be grateful.
Thanks in advance. :)
You are trying to set a value of already assigned objects at keys "idnumber1", etc.
What you'll need is to initialize each objects for your ids like this:
var myObject = {};
myObject[idnumber1] = {};
myObject[idnumber1].place = "SomePlace1";
myObject[idnumber2] = {};
myObject[idnumber2].place = "SomeLoc1"
I would do it this way, it's not exactly what you did ask for, but I think it will become easier to change this later on.
function Place(name, location) {
this.name = name;
this.location = location;
}
var myObject = {}
myObject['id1'] = new Place('Foo', 'Bar');
myObject['id2'] = new Place('Internet', 'test');
console.log(myObject);
To dynamically create objects in your collection, you can use a numerical counter variable to create your object collection (myObject["id" + i] = {name: place_name, location: place_loc}).
An example:
var myObject = {};
for (i = 0; i < 20; i++){
myObject["id" + i] = {name: place_name, location: place_loc}
}
In practice, you can use a counter that you increment outside of a loop.
Well, the problem is quite simple. I got an object of parsed table rows. Code for it is this:
var erg = [];
$("tr").each(function (index) {
var row = {};
var test = $(this).children();
row['column1'] = test[0].textContent;
row['column2'] = test[1].textContent;
row['column3'] = test[2].textContent;
row['column4'] = test[3].textContent;
row['column5'] = test[4].textContent;
row['column6'] = test[5].textContent;
row['column7'] = test[6].textContent;
erg.push(row);
});
And I wanna pass a variable var my_variable="blabla" to it without ruining the structure of the object. So how could i bring that object into a structure like this?:
Object{my_variable="my_variable_value"}, Object{my_table=[Object{...}, Object{...}]} //all the objects of the table
$.extend({}, erg, my_variable); only messed my object up.
I want it in that structure so i can pass it as json to my php script and filter my variable easily. Any tips, links, code snippets? :)
I'm not sure at which point you want to add that, but you may simply wrap your array with another object, and add your property to that same object.
This is basically what Florent's answer does, but using an object literal instead of a "class" and prototype:
// (your current code)
var wrapper = {
my_variable: 'something',
my_table: erg
};
You can define a class and add the needed variables to its prototype.
First you need a little utility to do that:
function createSharedStruct() {
// Define a shared structure
var Struct = function() {};
// Define a method to define a shared variable
Struct.share = function(variable, value) {
Struct.prototype[variable] = value;
};
return Struct;
}
And then, update your code:
// Create the shared structure
var rowClass = createSharedStruct();
// Register your shared variables
rowClass.share('my_variable', 'my_variable_value');
var erg = [];
$("tr").each(function (index) {
var test = $(this).children();
// Create a new row
var row = new rowClass();
row['column1'] = test[0].textContent;
row['column2'] = test[1].textContent;
row['column3'] = test[2].textContent;
row['column4'] = test[3].textContent;
row['column5'] = test[4].textContent;
row['column6'] = test[5].textContent;
row['column7'] = test[6].textContent;
erg.push(row);
});
// No matter when you share a variable, it will be defined among
// all instances of the same struct.
rowClass.share('my_other_var', 42);
Now you can access shared variables:
console.log(erg[0].my_other_variable); // 42
console.log(erg[1].my_other_variable); // 42
Demo available on JSFiddle.
I currently the following jQuery collection / object:
[li.row-0, li.row-1, li.row-2, li-row-2, li.row-2, li.row-3]
Each class name is dynamically added to each element by a previous method. The only consistent part of the class name is row-. The number can be anywhere from 0 - ∞.
I want to create a new array or object of elements that are grouped by same dynamic class name:
[li.row-0]
[li.row-1]
[li.row-2, li.row-2, li.row-2, li.row-2]
[li.row-3]
The above is just a guess of the outcome, as I am not 100% sure how best to achieve this.
The aim is to be able to loop through .row-0, .row-1, .row-2, .row-3 and do something with the elements in each individual row.
I would do this :
var map = [].reduce.call(arr, function(map, v){
(map[v.className]||(map[v.className]=[])).push(v);
return map;
}, {});
var arr2 = [];
for (var className in map) arr2.push(map[className]);
The reduce builds a map having as keys the class names and with values the arrays of the elements having that class name.
I use [].reduce.call(arr, instead of arr.reduce( so that it works for standard arrays, jQuery collections, nodelists, etc.
Then the loop builds an array from that map. You might find the map more useful than the final array.
This shows you a general way of achieving this, though you're probably using elements rather than strings, but hopefully this will help
var tst = ['li.row-0','li.row-1','li.row-2','li.row-2','li.row-2','li.row-3'];
var grouped = [];
for(var i in tst)
{
var text = tst[i];
var num = text.replace('li.row-','');
if(!grouped[num]) grouped[num] = [];
grouped[num].push(text);
}
console.log(grouped);//[["li.row-0"], ["li.row-1"], ["li.row-2", "li.row-2", "li.row-2"], ["li.row-3"]]
Using elements:
var tst = [li.row-0,li.row-1,li.row-2,li.row-2,li.row-2,li.row-3];
var grouped = [];
for(var i in tst)
{
var text = tst[i].className;
var num = text.replace('row-','');
if(!grouped[num]) grouped[num] = [];
grouped[num].push(text);
}
console.log(grouped);//[["li.row-0"], ["li.row-1"], ["li.row-2", "li.row-2", "li.row-2"], ["li.row-3"]]
This method is more verbose and allows more complex grouping if need be (if other attributes come into play)
I would do something like the following:
var arr = ['li.row-0', 'li.row-1', 'li.row-2', 'li.row-2', 'li.row-2', 'li.row-3'];
var result = {};
$.each(arr, function (index, item) {
var ind = item.toString().split('row-')[1];
(result[ind] || (result[ind] = [])).push(item);
});
console.log(result);
I have an object within an object. It looks like this.
var myLib = {
object1: {}
}
My basic problem is that I wanted to end up like this. So I would like to do this dynamically I will not know the property's or additional objects until run time.
var myLib = {
object1: ({"A1":({"Color":"Blue",
"height":50})
})
}
From reading here on Stack Overflow I know that I can create an object within an object by simply going like this:
myLib.Object1["A1"] = "Something"
But this does not produce what I'm looking for.
I tried this syntax which I know is wrong but basically
mylib.Object1["A1"].["color"]="Blue";
so basically here is the question. I would like to create object "A1" under "mylib.Object" and immediately add property color = "blue" to "A1". I would need to do this for several other properties, but if I can figure out how to do this for one, I can figure it out for the rest. How can I accomplish this task?
No jQuery, please. Just plain old JavaScript is what I'm looking for.**
Once I create the object and properties I would imagine I can just use a for loop to loop through the properties for that object. Like so:
for(key in mylib.Object1["A1"]){}
Right?
You can create it all from scratch like this:
var myLib = {};
myLib.object1 = {};
// assuming you get this value from your code somewhere
var x = "A1";
myLib.object1[x] = {Color: "Blue", height: 50};
Or, if all values are in variables:
var myLib = {};
myLib.object1 = {};
// assuming you get this value from your code somewhere
var x = "A1";
var colorProp = "Color";
var colorPropValue = "Blue";
var heightProp = "height";
var heightPropValue = 50;
myLib.object1[x] = {}; // create empty object so we can then add properties to it
myLib.object1[x][colorProp] = colorPropValue; // add one property
myLib.object1[x][heightProp] = heightPropValue; // add another property
These syntaxes create identical results:
myLib.object1.A1 = {};
var x = "A1";
myLib.object1[x] = {};
The first can only be used when the property name is known when you write the code and when the property name follows the proper rules for a javascript identifier. The second can be used any time, but is typically used when the property name is in a variable or when it doesn't follow the rules for a javascript identifier (like it starts with a digit).
jQuery.get("ChkNewRspLive.php?lastmsgID=" + n, function(newitems){
//some code to separate values of 2d array.
$('#div1').append(msgid);
$('#div2').append(rspid);
});
Let's say the value of newitems is [["320","23"],["310","26"]]
I want to assign "320" and "310" to var msgid.
I want to assign "23" and "26" to var rspid.
How to do that?
I tried to display newitems and the output is "Array". I tried to display newitems[0] and the output is blank.
If I redeclare var newitems = [["320","23"],["310","26"]]; it works. So I guess the variable newitems from jQuery.get is something wrong. Is it I cannot pass the array from other page to current page through jQuery directly?
Regarding the array on other page, if echo json_encode($Arraytest); the output is [["320","23"],["310","26"]] but if echo $Arraytest; the output is Array. How do I pass the array from other page to currently page by jQuery.get?
I don't totally understand the question but I'm going to assume you want the values in an array, as two values can't be stored in one (scalar) variable simultaneously.
jQuery.get("ChkNewRspLive.php?lastmsgID=" + n, function(newitems){
//some code to separate values of 2d array.
var msgid = [],
rspid = [];
for( i = 0 ; i < newitems.length ; i++){
msgid[msgid.length] = newitems[i][0];
rspid[rspid.length] = newitems[i][1];
}
//msgid now contains ["320","310"]
//rspid now contains ["23","26"]
});
Bear in mind those are in the function scope. If you want to use them outside of that scope instantiate them outside. see: closure
You can use pluck from underscore.js: http://documentcloud.github.com/underscore/#pluck
var msgid = _(newitems).pluck(0)
var rspid = _(newitems).pluck(1)
Try this:
function getArrayDimension(arr, dim) {
var res = [];
for(var i = 0; i < arr.length; i++) {
res.push(arr[i][dim]);
}
return res;
}
var newitems = [["320","23"],["310","26"]];
var msgid = getArrayDimension(newitems, 0);
var rspid = getArrayDimension(newitems, 1);
msgid and rspid are arrays holding the 'nth' dimention.
Tnx