What does this obfuscated javascript snippet mean/do? - javascript

I cannot understand what this little snippet: var num = str.replace(/[^0-9]/g, ''); does.
Context:
function retnum(str) {
var num = str.replace(/[^0-9]/g, '');
var liczba = parseInt(num);
return liczba;
}

This JavaScript snippet will rip out anything that is not (the ^ part of the regular expression means "not") a number in str and then return an integer cast from the result as liczba. See my comments:
// This function will return a number from a string that may contain other characters.
// Example: "1.23" -> 123
// Example: "a123" -> 123
// Example: "hg47g*y#" -> 47
function retnum(str) {
// First let's replace everything in str that is not a number with "" (nothing)
var num = str.replace(/[^0-9]/g, '');
// Let's use JavaScript's built in parseInt() to parse an Integer from the remaining string (called "num")
var liczba = parseInt(num);
// Let's now return that Integer:
return liczba;
}
By the way, "liczba" means number in Polish :-)

This function takes a string, strips all non-number characters from it, turns the string into an integer, and returns the integer. The line you're asking about specifically is the part that strips out all non-number characters from the initial string, using the string.replace method.

It's not obfuscated, it's using a regular expression.
The expression matches all things which are not numbers then removes them. 0-9 means "any digit" and the ^ means "not". The g flag means to check the entire string instead of just the first match. Finally, the result is converted to a number.
Example:
var input = 'abc123def456';
var str = input.replace(/[^0-9]/g, '');
var num = parseInt(str);
document.querySelector('pre').innerText = num;
<pre></pre>

It literally just replaces anything which is not a number with a blank ('').

Related

Removing last two characters of a string [duplicate]

I have a string, 12345.00, and I would like it to return 12345.0.
I have looked at trim, but it looks like it is only trimming whitespace and slice which I don't see how this would work. Any suggestions?
You can use the substring function:
let str = "12345.00";
str = str.substring(0, str.length - 1);
console.log(str);
This is the accepted answer, but as per the conversations below, the slice syntax is much clearer:
let str = "12345.00";
str = str.slice(0, -1);
console.log(str);
You can use slice! You just have to make sure you know how to use it. Positive #s are relative to the beginning, negative numbers are relative to the end.
js>"12345.00".slice(0,-1)
12345.0
You can use the substring method of JavaScript string objects:
s = s.substring(0, s.length - 4)
It unconditionally removes the last four characters from string s.
However, if you want to conditionally remove the last four characters, only if they are exactly _bar:
var re = /_bar$/;
s.replace(re, "");
The easiest method is to use the slice method of the string, which allows negative positions (corresponding to offsets from the end of the string):
const s = "your string";
const withoutLastFourChars = s.slice(0, -4);
If you needed something more general to remove everything after (and including) the last underscore, you could do the following (so long as s is guaranteed to contain at least one underscore):
const s = "your_string";
const withoutLastChunk = s.slice(0, s.lastIndexOf("_"));
console.log(withoutLastChunk);
For a number like your example, I would recommend doing this over substring:
console.log(parseFloat('12345.00').toFixed(1));
Do note that this will actually round the number, though, which I would imagine is desired but maybe not:
console.log(parseFloat('12345.46').toFixed(1));
Be aware that String.prototype.{ split, slice, substr, substring } operate on UTF-16 encoded strings
None of the previous answers are Unicode-aware.
Strings are encoded as UTF-16 in most modern JavaScript engines, but higher Unicode code points require surrogate pairs, so older, pre-existing string methods operate on UTF-16 code units, not Unicode code points.
See: Do NOT use .split('').
const string = "ẞ🦊";
console.log(string.slice(0, -1)); // "ẞ\ud83e"
console.log(string.substr(0, string.length - 1)); // "ẞ\ud83e"
console.log(string.substring(0, string.length - 1)); // "ẞ\ud83e"
console.log(string.replace(/.$/, "")); // "ẞ\ud83e"
console.log(string.match(/(.*).$/)[1]); // "ẞ\ud83e"
const utf16Chars = string.split("");
utf16Chars.pop();
console.log(utf16Chars.join("")); // "ẞ\ud83e"
In addition, RegExp methods, as suggested in older answers, don’t match line breaks at the end:
const string = "Hello, world!\n";
console.log(string.replace(/.$/, "").endsWith("\n")); // true
console.log(string.match(/(.*).$/) === null); // true
Use the string iterator to iterate characters
Unicode-aware code utilizes the string’s iterator; see Array.from and ... spread.
string[Symbol.iterator] can be used (e.g. instead of string) as well.
Also see How to split Unicode string to characters in JavaScript.
Examples:
const string = "ẞ🦊";
console.log(Array.from(string).slice(0, -1).join("")); // "ẞ"
console.log([
...string
].slice(0, -1).join("")); // "ẞ"
Use the s and u flags on a RegExp
The dotAll or s flag makes . match line break characters, the unicode or u flag enables certain Unicode-related features.
Note that, when using the u flag, you eliminate unnecessary identity escapes, as these are invalid in a u regex, e.g. \[ is fine, as it would start a character class without the backslash, but \: isn’t, as it’s a : with or without the backslash, so you need to remove the backslash.
Examples:
const unicodeString = "ẞ🦊",
lineBreakString = "Hello, world!\n";
console.log(lineBreakString.replace(/.$/s, "").endsWith("\n")); // false
console.log(lineBreakString.match(/(.*).$/s) === null); // false
console.log(unicodeString.replace(/.$/su, "")); // ẞ
console.log(unicodeString.match(/(.*).$/su)[1]); // ẞ
// Now `split` can be made Unicode-aware:
const unicodeCharacterArray = unicodeString.split(/(?:)/su),
lineBreakCharacterArray = lineBreakString.split(/(?:)/su);
unicodeCharacterArray.pop();
lineBreakCharacterArray.pop();
console.log(unicodeCharacterArray.join("")); // "ẞ"
console.log(lineBreakCharacterArray.join("").endsWith("\n")); // false
Note that some graphemes consist of more than one code point, e.g. 🏳️‍🌈 which consists of the sequence 🏳 (U+1F3F3), VS16 (U+FE0F), ZWJ (U+200D), 🌈 (U+1F308).
Here, even Array.from will split this into four “characters”.
Matching those is made easier with the RegExp set notation and properties of strings proposal.
Using JavaScript's slice function:
let string = 'foo_bar';
string = string.slice(0, -4); // Slice off last four characters here
console.log(string);
This could be used to remove '_bar' at end of a string, of any length.
A regular expression is what you are looking for:
let str = "foo_bar";
console.log(str.replace(/_bar$/, ""));
Try this:
const myString = "Hello World!";
console.log(myString.slice(0, -1));
Performance
Today 2020.05.13 I perform tests of chosen solutions on Chrome v81.0, Safari v13.1 and Firefox v76.0 on MacOs High Sierra v10.13.6.
Conclusions
the slice(0,-1)(D) is fast or fastest solution for short and long strings and it is recommended as fast cross-browser solution
solutions based on substring (C) and substr(E) are fast
solutions based on regular expressions (A,B) are slow/medium fast
solutions B, F and G are slow for long strings
solution F is slowest for short strings, G is slowest for long strings
Details
I perform two tests for solutions A, B, C, D, E(ext), F, G(my)
for 8-char short string (from OP question) - you can run it HERE
for 1M long string - you can run it HERE
Solutions are presented in below snippet
function A(str) {
return str.replace(/.$/, '');
}
function B(str) {
return str.match(/(.*).$/)[1];
}
function C(str) {
return str.substring(0, str.length - 1);
}
function D(str) {
return str.slice(0, -1);
}
function E(str) {
return str.substr(0, str.length - 1);
}
function F(str) {
let s= str.split("");
s.pop();
return s.join("");
}
function G(str) {
let s='';
for(let i=0; i<str.length-1; i++) s+=str[i];
return s;
}
// ---------
// TEST
// ---------
let log = (f)=>console.log(`${f.name}: ${f("12345.00")}`);
[A,B,C,D,E,F,G].map(f=>log(f));
This snippet only presents soutions
Here are example results for Chrome for short string
Use regex:
let aStr = "12345.00";
aStr = aStr.replace(/.$/, '');
console.log(aStr);
How about:
let myString = "12345.00";
console.log(myString.substring(0, myString.length - 1));
1. (.*), captures any character multiple times:
console.log("a string".match(/(.*).$/)[1]);
2. ., matches last character, in this case:
console.log("a string".match(/(.*).$/));
3. $, matches the end of the string:
console.log("a string".match(/(.*).{2}$/)[1]);
https://stackoverflow.com/questions/34817546/javascript-how-to-delete-last-two-characters-in-a-string
Just use trim if you don't want spaces
"11.01 °C".slice(0,-2).trim()
Here is an alternative that i don't think i've seen in the other answers, just for fun.
var strArr = "hello i'm a string".split("");
strArr.pop();
document.write(strArr.join(""));
Not as legible or simple as slice or substring but does allow you to play with the string using some nice array methods, so worth knowing.
debris = string.split("_") //explode string into array of strings indexed by "_"
debris.pop(); //pop last element off the array (which you didn't want)
result = debris.join("_"); //fuse the remainng items together like the sun
If you want to do generic rounding of floats, instead of just trimming the last character:
var float1 = 12345.00,
float2 = 12345.4567,
float3 = 12345.982;
var MoreMath = {
/**
* Rounds a value to the specified number of decimals
* #param float value The value to be rounded
* #param int nrDecimals The number of decimals to round value to
* #return float value rounded to nrDecimals decimals
*/
round: function (value, nrDecimals) {
var x = nrDecimals > 0 ? 10 * parseInt(nrDecimals, 10) : 1;
return Math.round(value * x) / x;
}
}
MoreMath.round(float1, 1) => 12345.0
MoreMath.round(float2, 1) => 12345.5
MoreMath.round(float3, 1) => 12346.0
EDIT: Seems like there exists a built in function for this, as Paolo points out. That solution is obviously much cleaner than mine. Use parseFloat followed by toFixed
if(str.substring(str.length - 4) == "_bar")
{
str = str.substring(0, str.length - 4);
}
Via slice(indexStart, indexEnd) method - note, this does NOT CHANGE the existing string, it creates a copy and changes the copy.
console.clear();
let str = "12345.00";
let a = str.slice(0, str.length -1)
console.log(a, "<= a");
console.log(str, "<= str is NOT changed");
Via Regular Expression method - note, this does NOT CHANGE the existing string, it creates a copy and changes the copy.
console.clear();
let regExp = /.$/g
let b = str.replace(regExp,"")
console.log(b, "<= b");
console.log(str, "<= str is NOT changed");
Via array.splice() method -> this only works on arrays, and it CHANGES, the existing array (so careful with this one), you'll need to convert a string to an array first, then back.
console.clear();
let str = "12345.00";
let strToArray = str.split("")
console.log(strToArray, "<= strToArray");
let spliceMethod = strToArray.splice(str.length-1, 1)
str = strToArray.join("")
console.log(str, "<= str is changed now");
In cases where you want to remove something that is close to the end of a string (in case of variable sized strings) you can combine slice() and substr().
I had a string with markup, dynamically built, with a list of anchor tags separated by comma. The string was something like:
var str = "<a>text 1,</a><a>text 2,</a><a>text 2.3,</a><a>text abc,</a>";
To remove the last comma I did the following:
str = str.slice(0, -5) + str.substr(-4);
You can, in fact, remove the last arr.length - 2 items of an array using arr.length = 2, which if the array length was 5, would remove the last 3 items.
Sadly, this does not work for strings, but we can use split() to split the string, and then join() to join the string after we've made any modifications.
var str = 'string'
String.prototype.removeLast = function(n) {
var string = this.split('')
string.length = string.length - n
return string.join('')
}
console.log(str.removeLast(3))
Try to use toFixed
const str = "12345.00";
return (+str).toFixed(1);
Try this:
<script>
var x="foo_foo_foo_bar";
for (var i=0; i<=x.length; i++) {
if (x[i]=="_" && x[i+1]=="b") {
break;
}
else {
document.write(x[i]);
}
}
</script>
You can also try the live working example on http://jsfiddle.net/informativejavascript/F7WTn/87/.
#Jason S:
You can use slice! You just have to
make sure you know how to use it.
Positive #s are relative to the
beginning, negative numbers are
relative to the end.
js>"12345.00".slice(0,-1)
12345.0
Sorry for my graphomany but post was tagged 'jquery' earlier. So, you can't use slice() inside jQuery because slice() is jQuery method for operations with DOM elements, not substrings ...
In other words answer #Jon Erickson suggest really perfect solution.
However, your method will works out of jQuery function, inside simple Javascript.
Need to say due to last discussion in comments, that jQuery is very much more often renewable extension of JS than his own parent most known ECMAScript.
Here also exist two methods:
as our:
string.substring(from,to) as plus if 'to' index nulled returns the rest of string. so:
string.substring(from) positive or negative ...
and some other - substr() - which provide range of substring and 'length' can be positive only:
string.substr(start,length)
Also some maintainers suggest that last method string.substr(start,length) do not works or work with error for MSIE.
Use substring to get everything to the left of _bar. But first you have to get the instr of _bar in the string:
str.substring(3, 7);
3 is that start and 7 is the length.

How to parse string value "(20)" to Integer in Javascript?

I'm working with a string "(20)". I need to convert it to an int. I read parseInt is a function which helps me to achieve that, but i don't know how.
Use string slicing and parseInt()
var str = "(20)"
str = str.slice(1, -1) // remove parenthesis
var integer = parseInt(str) // make it an integer
console.log(integer) // 20
One Line version
var integer = parseInt("(20)".slice(1, -1))
The slice method slices the string by the start and end index, start is 1, because that’s the (, end is -1, which means the last one - ), therefore the () will be stripped. Then parseInt() turns it into an integer.
Or use regex so it can work with other cases, credits to #adeithe
var integer = parseInt("(20)".match(/\d+/g))
It will match the digits and make it an integer
Read more:
slicing strings
regex
You can use regex to achieve this
var str = "(20)"
parseInt(str.match(/\d+/g).join())
Easy, use this
var number = parseInt((string).substr(2,3));
You need to extract that number first, you can use the match method and a regex \d wich means "digits". Then you can parse that number
let str = "(20)";
console.log(parseInt(str.match(/\d+/)));
Cleaner version of Hedy's
var str = "(20)";
var str_as_integer = parseInt(str.slice(1, -1))

I need help getting the first n characters of a string up to when a number character starts

I'm working with a string where I need to extract the first n characters up to where numbers begin. What would be the best way to do this as sometimes the string starts with a number: 7EUSA8889er898 I would need to extract 7EUSA But other string examples would be SWFX74849948, I would need to extract SWFX from that string.
Not sure how to do this with regex my limited knowledge is blocking me at this point:
^(\w{4}) that just gets me the first four characters but I don't really have a stopping point as sometimes the string could be somelongstring292894830982 which would require me to get somelongstring
Using \w will match a word character which includes characters and digits and an underscore.
You could match an optional digit [0-9]? from the start of the string ^and then match 1+ times A-Za-z
^[0-9]?[A-Za-z]+
Regex demo
const regex = /^[0-9]?[A-Za-z]+/;
[
"7EUSA8889er898",
"somelongstring292894830982",
"SWFX74849948"
].forEach(s => console.log(s.match(regex)[0]));
Can use this regex code:
(^\d+?[a-zA-Z]+)|(^\d+|[a-zA-Z]+)
I try with exmaple and good worked:
1- somelongstring292894830982 -> somelongstring
2- 7sdfsdf5456 -> 7sdfsdf
3- 875werwer54556 -> 875werwer
If you want to create function where the RegExp is parametrized by n parameter, this would be
function getStr(str,n) {
var pattern = "\\d?\\w{0,"+n+"}";
var reg = new RegExp(pattern);
var result = reg.exec(str);
if(result[0]) return result[0].substr(0,n);
}
There are answers to this but here is another way to do it.
var string1 = '7EUSA8889er898';
var string2 = 'SWFX74849948';
var Extract = function (args) {
var C = args.split(''); // Split string in array
var NI = []; // Store indexes of all numbers
// Loop through list -> if char is a number add its index
C.map(function (I) { return /^\d+$/.test(I) === true ? NI.push(C.indexOf(I)) : ''; });
// Get the items between the first and second occurence of a number
return C.slice(NI[0] === 0 ? NI[0] + 1 : 0, NI[1]).join('');
};
console.log(Extract(string1));
console.log(Extract(string2));
Output
EUSA
SWFX7
Since it's hard to tell what you are trying to match, I'd go with a general regex
^\d?\D+(?=\d)

trim certain number of characters from end of javascript string [duplicate]

I have a string, 12345.00, and I would like it to return 12345.0.
I have looked at trim, but it looks like it is only trimming whitespace and slice which I don't see how this would work. Any suggestions?
You can use the substring function:
let str = "12345.00";
str = str.substring(0, str.length - 1);
console.log(str);
This is the accepted answer, but as per the conversations below, the slice syntax is much clearer:
let str = "12345.00";
str = str.slice(0, -1);
console.log(str);
You can use slice! You just have to make sure you know how to use it. Positive #s are relative to the beginning, negative numbers are relative to the end.
js>"12345.00".slice(0,-1)
12345.0
You can use the substring method of JavaScript string objects:
s = s.substring(0, s.length - 4)
It unconditionally removes the last four characters from string s.
However, if you want to conditionally remove the last four characters, only if they are exactly _bar:
var re = /_bar$/;
s.replace(re, "");
The easiest method is to use the slice method of the string, which allows negative positions (corresponding to offsets from the end of the string):
const s = "your string";
const withoutLastFourChars = s.slice(0, -4);
If you needed something more general to remove everything after (and including) the last underscore, you could do the following (so long as s is guaranteed to contain at least one underscore):
const s = "your_string";
const withoutLastChunk = s.slice(0, s.lastIndexOf("_"));
console.log(withoutLastChunk);
For a number like your example, I would recommend doing this over substring:
console.log(parseFloat('12345.00').toFixed(1));
Do note that this will actually round the number, though, which I would imagine is desired but maybe not:
console.log(parseFloat('12345.46').toFixed(1));
Be aware that String.prototype.{ split, slice, substr, substring } operate on UTF-16 encoded strings
None of the previous answers are Unicode-aware.
Strings are encoded as UTF-16 in most modern JavaScript engines, but higher Unicode code points require surrogate pairs, so older, pre-existing string methods operate on UTF-16 code units, not Unicode code points.
See: Do NOT use .split('').
const string = "ẞ🦊";
console.log(string.slice(0, -1)); // "ẞ\ud83e"
console.log(string.substr(0, string.length - 1)); // "ẞ\ud83e"
console.log(string.substring(0, string.length - 1)); // "ẞ\ud83e"
console.log(string.replace(/.$/, "")); // "ẞ\ud83e"
console.log(string.match(/(.*).$/)[1]); // "ẞ\ud83e"
const utf16Chars = string.split("");
utf16Chars.pop();
console.log(utf16Chars.join("")); // "ẞ\ud83e"
In addition, RegExp methods, as suggested in older answers, don’t match line breaks at the end:
const string = "Hello, world!\n";
console.log(string.replace(/.$/, "").endsWith("\n")); // true
console.log(string.match(/(.*).$/) === null); // true
Use the string iterator to iterate characters
Unicode-aware code utilizes the string’s iterator; see Array.from and ... spread.
string[Symbol.iterator] can be used (e.g. instead of string) as well.
Also see How to split Unicode string to characters in JavaScript.
Examples:
const string = "ẞ🦊";
console.log(Array.from(string).slice(0, -1).join("")); // "ẞ"
console.log([
...string
].slice(0, -1).join("")); // "ẞ"
Use the s and u flags on a RegExp
The dotAll or s flag makes . match line break characters, the unicode or u flag enables certain Unicode-related features.
Note that, when using the u flag, you eliminate unnecessary identity escapes, as these are invalid in a u regex, e.g. \[ is fine, as it would start a character class without the backslash, but \: isn’t, as it’s a : with or without the backslash, so you need to remove the backslash.
Examples:
const unicodeString = "ẞ🦊",
lineBreakString = "Hello, world!\n";
console.log(lineBreakString.replace(/.$/s, "").endsWith("\n")); // false
console.log(lineBreakString.match(/(.*).$/s) === null); // false
console.log(unicodeString.replace(/.$/su, "")); // ẞ
console.log(unicodeString.match(/(.*).$/su)[1]); // ẞ
// Now `split` can be made Unicode-aware:
const unicodeCharacterArray = unicodeString.split(/(?:)/su),
lineBreakCharacterArray = lineBreakString.split(/(?:)/su);
unicodeCharacterArray.pop();
lineBreakCharacterArray.pop();
console.log(unicodeCharacterArray.join("")); // "ẞ"
console.log(lineBreakCharacterArray.join("").endsWith("\n")); // false
Note that some graphemes consist of more than one code point, e.g. 🏳️‍🌈 which consists of the sequence 🏳 (U+1F3F3), VS16 (U+FE0F), ZWJ (U+200D), 🌈 (U+1F308).
Here, even Array.from will split this into four “characters”.
Matching those is made easier with the RegExp set notation and properties of strings proposal.
Using JavaScript's slice function:
let string = 'foo_bar';
string = string.slice(0, -4); // Slice off last four characters here
console.log(string);
This could be used to remove '_bar' at end of a string, of any length.
A regular expression is what you are looking for:
let str = "foo_bar";
console.log(str.replace(/_bar$/, ""));
Try this:
const myString = "Hello World!";
console.log(myString.slice(0, -1));
Performance
Today 2020.05.13 I perform tests of chosen solutions on Chrome v81.0, Safari v13.1 and Firefox v76.0 on MacOs High Sierra v10.13.6.
Conclusions
the slice(0,-1)(D) is fast or fastest solution for short and long strings and it is recommended as fast cross-browser solution
solutions based on substring (C) and substr(E) are fast
solutions based on regular expressions (A,B) are slow/medium fast
solutions B, F and G are slow for long strings
solution F is slowest for short strings, G is slowest for long strings
Details
I perform two tests for solutions A, B, C, D, E(ext), F, G(my)
for 8-char short string (from OP question) - you can run it HERE
for 1M long string - you can run it HERE
Solutions are presented in below snippet
function A(str) {
return str.replace(/.$/, '');
}
function B(str) {
return str.match(/(.*).$/)[1];
}
function C(str) {
return str.substring(0, str.length - 1);
}
function D(str) {
return str.slice(0, -1);
}
function E(str) {
return str.substr(0, str.length - 1);
}
function F(str) {
let s= str.split("");
s.pop();
return s.join("");
}
function G(str) {
let s='';
for(let i=0; i<str.length-1; i++) s+=str[i];
return s;
}
// ---------
// TEST
// ---------
let log = (f)=>console.log(`${f.name}: ${f("12345.00")}`);
[A,B,C,D,E,F,G].map(f=>log(f));
This snippet only presents soutions
Here are example results for Chrome for short string
Use regex:
let aStr = "12345.00";
aStr = aStr.replace(/.$/, '');
console.log(aStr);
How about:
let myString = "12345.00";
console.log(myString.substring(0, myString.length - 1));
1. (.*), captures any character multiple times:
console.log("a string".match(/(.*).$/)[1]);
2. ., matches last character, in this case:
console.log("a string".match(/(.*).$/));
3. $, matches the end of the string:
console.log("a string".match(/(.*).{2}$/)[1]);
https://stackoverflow.com/questions/34817546/javascript-how-to-delete-last-two-characters-in-a-string
Just use trim if you don't want spaces
"11.01 °C".slice(0,-2).trim()
Here is an alternative that i don't think i've seen in the other answers, just for fun.
var strArr = "hello i'm a string".split("");
strArr.pop();
document.write(strArr.join(""));
Not as legible or simple as slice or substring but does allow you to play with the string using some nice array methods, so worth knowing.
debris = string.split("_") //explode string into array of strings indexed by "_"
debris.pop(); //pop last element off the array (which you didn't want)
result = debris.join("_"); //fuse the remainng items together like the sun
If you want to do generic rounding of floats, instead of just trimming the last character:
var float1 = 12345.00,
float2 = 12345.4567,
float3 = 12345.982;
var MoreMath = {
/**
* Rounds a value to the specified number of decimals
* #param float value The value to be rounded
* #param int nrDecimals The number of decimals to round value to
* #return float value rounded to nrDecimals decimals
*/
round: function (value, nrDecimals) {
var x = nrDecimals > 0 ? 10 * parseInt(nrDecimals, 10) : 1;
return Math.round(value * x) / x;
}
}
MoreMath.round(float1, 1) => 12345.0
MoreMath.round(float2, 1) => 12345.5
MoreMath.round(float3, 1) => 12346.0
EDIT: Seems like there exists a built in function for this, as Paolo points out. That solution is obviously much cleaner than mine. Use parseFloat followed by toFixed
if(str.substring(str.length - 4) == "_bar")
{
str = str.substring(0, str.length - 4);
}
Via slice(indexStart, indexEnd) method - note, this does NOT CHANGE the existing string, it creates a copy and changes the copy.
console.clear();
let str = "12345.00";
let a = str.slice(0, str.length -1)
console.log(a, "<= a");
console.log(str, "<= str is NOT changed");
Via Regular Expression method - note, this does NOT CHANGE the existing string, it creates a copy and changes the copy.
console.clear();
let regExp = /.$/g
let b = str.replace(regExp,"")
console.log(b, "<= b");
console.log(str, "<= str is NOT changed");
Via array.splice() method -> this only works on arrays, and it CHANGES, the existing array (so careful with this one), you'll need to convert a string to an array first, then back.
console.clear();
let str = "12345.00";
let strToArray = str.split("")
console.log(strToArray, "<= strToArray");
let spliceMethod = strToArray.splice(str.length-1, 1)
str = strToArray.join("")
console.log(str, "<= str is changed now");
In cases where you want to remove something that is close to the end of a string (in case of variable sized strings) you can combine slice() and substr().
I had a string with markup, dynamically built, with a list of anchor tags separated by comma. The string was something like:
var str = "<a>text 1,</a><a>text 2,</a><a>text 2.3,</a><a>text abc,</a>";
To remove the last comma I did the following:
str = str.slice(0, -5) + str.substr(-4);
You can, in fact, remove the last arr.length - 2 items of an array using arr.length = 2, which if the array length was 5, would remove the last 3 items.
Sadly, this does not work for strings, but we can use split() to split the string, and then join() to join the string after we've made any modifications.
var str = 'string'
String.prototype.removeLast = function(n) {
var string = this.split('')
string.length = string.length - n
return string.join('')
}
console.log(str.removeLast(3))
Try to use toFixed
const str = "12345.00";
return (+str).toFixed(1);
Try this:
<script>
var x="foo_foo_foo_bar";
for (var i=0; i<=x.length; i++) {
if (x[i]=="_" && x[i+1]=="b") {
break;
}
else {
document.write(x[i]);
}
}
</script>
You can also try the live working example on http://jsfiddle.net/informativejavascript/F7WTn/87/.
#Jason S:
You can use slice! You just have to
make sure you know how to use it.
Positive #s are relative to the
beginning, negative numbers are
relative to the end.
js>"12345.00".slice(0,-1)
12345.0
Sorry for my graphomany but post was tagged 'jquery' earlier. So, you can't use slice() inside jQuery because slice() is jQuery method for operations with DOM elements, not substrings ...
In other words answer #Jon Erickson suggest really perfect solution.
However, your method will works out of jQuery function, inside simple Javascript.
Need to say due to last discussion in comments, that jQuery is very much more often renewable extension of JS than his own parent most known ECMAScript.
Here also exist two methods:
as our:
string.substring(from,to) as plus if 'to' index nulled returns the rest of string. so:
string.substring(from) positive or negative ...
and some other - substr() - which provide range of substring and 'length' can be positive only:
string.substr(start,length)
Also some maintainers suggest that last method string.substr(start,length) do not works or work with error for MSIE.
Use substring to get everything to the left of _bar. But first you have to get the instr of _bar in the string:
str.substring(3, 7);
3 is that start and 7 is the length.

regex to get the number from the end of a string

i have a id like stringNumber variable like the one as follows : example12
I need some javascript regex to extract 12 from the string."example" will be constant for all id and just the number will be different.
This regular expression matches numbers at the end of the string.
var matches = str.match(/\d+$/);
It will return an Array with its 0th element the match, if successful. Otherwise, it will return null.
Before accessing the 0 member, ensure the match was made.
if (matches) {
number = matches[0];
}
jsFiddle.
If you must have it as a Number, you can use a function to convert it, such as parseInt().
number = parseInt(number, 10);
RegEx:
var str = "example12";
parseInt(str.match(/\d+$/)[0], 10);
String manipulation:
var str = "example12",
prefix = "example";
parseInt(str.substring(prefix.length), 10);

Categories