camera :
Camera = new THREE.PerspectiveCamera(45, Width / Height, 0.1, 10000);
Camera.position.set( 150, 400, 400);
Scene.add(Camera);
Light
Light = new THREE.SpotLight(0xffccff,.5, 0, Math.PI/2, 1);
Light.position.set(0, 2000, 0);
Light.castShadow = true;
Light.shadowBias = -0.0002;
Light.shadowCameraNear = 850;
Light.shadowCameraFar = 8000;
Light.shadowCameraFov = 600;
Light.shadowDarkness = .7;
Light.shadowMapWidth = 2048;
Light.shadowMapHeight = 2048;
Scene.add(Light);
Renderer
Renderer = new THREE.WebGLRenderer({
antialias: true,
sortObjects: false,
preserveDrawingBuffer: true,
shadowMapEnabled: true
});
document.body.appendChild(Renderer.domElement);
Renderer.shadowMap.type = THREE.PCFSoftShadowMap;
Renderer.shadowMap.cullFace = THREE.CullFaceBack;
Renderer.gammaInput = true;
Renderer.gammaOutput = true;
Renderer.setSize(window.innerWidth, window.innerHeight);
i use this function to add 3d model
function getModel(path,texture) {
var Material = new THREE.MeshPhongMaterial({shading: THREE.SmoothShading,
specular: 0xff9900,
shininess: 0,
side: THREE.DoubleSide,
shading: THREE.SmoothShading
});
Loader = new THREE.JSONLoader();
Loader.load(path,function(geometry){
geometry.mergeVertices();
geometry.computeFaceNormals();
geometry.computeVertexNormals();
TextureLoader.load(texture,function(texture){
Mesh = new THREE.Mesh(geometry, Material);
Mesh.material.map =texture;
Mesh.material.map.wrapS = THREE.RepeatWrapping;
Mesh.material.map.wrapT = THREE.RepeatWrapping;
Mesh.material.map.repeat.set(38,38);
//Mesh.position.y -= 1;
Mesh.position.y = 160;
Mesh.position.x = 0;
Mesh.position.z = 0;
Mesh.scale.set(40,40,40);
Mesh.castShadow = true;
Mesh.receiveShadow = true;
Scene.add(Mesh);
});
});
}
and the plane to recive shadow is
var planeGeometry = new THREE.PlaneBufferGeometry(100,100);
var planematerial = new THREE.MeshLambertMaterial(
{
shininess: 80,
color: 0xffaaff,
specular: 0xffffff
});
var plane = new THREE.Mesh(planeGeometry,planematerial);
plane.rotation.x = - Math.PI / 2;
plane.position.set(0,100,0);
plane.scale.set( 10, 10, 10 );
plane.receiveShadow = true;
plane.castShadow = true;
Scene.add(plane);
I just tried adjusting the position of the lights and adjusted the values of shadowCameraNear,Light.shadowCameraFar and Light.shadowCameraFov .but not no changes are seen
The camera is at (150, 400, 400), the object casting the shadow is at (0, 160, 0), the object receiving the shadow is at (0, 100, 0) and the shadowCameraNear frustum is set at 850. That is, your camera is about 200 and 400 units from the two shadowing objects, respectively, but your shadow viewing near frustum is 850 units away. Adjust your positioning. You can set
Light.shadowCameraVisible = true;
to show the camera frustum in debug mode to help out.
Related
I would like to make IcosahedronGeometry in three.js and reflect an image on the front side of the geometry.
I already made a IcosahedronGeometry and made it rotate on it's axis.
var scene = new THREE.Scene();
var camera = new THREE.PerspectiveCamera(
75,
window.innerWidth / window.innerHeight,
0.1,
1000
);
// RENDERER
var renderer = new THREE.WebGLRenderer({
antialias: true
});
// RENDERER - SIZE OF CANVAS
renderer.setSize(window.innerWidth, window.innerHeight);
renderer.setClearColor('#ffffff');
document.body.appendChild(renderer.domElement);
// RESPONSIVE RENDERING
window.addEventListener('resize', () => {
renderer.setSize(window.innerWidth, window.innerHeight);
camera.aspect = window.innerWidth / window.innerHeight;
camera.updateProjectionMatrix();
});
var groundMaterial = new THREE.MeshPhongMaterial({
shininess: 100,
color: 0xffffff,
specular: 0xffffff
});
const cubeCamera = new THREE.CubeCamera(75, 1000, 512);
scene.add(cubeCamera);
// GEOMETRY
var geometry = new THREE.IcosahedronGeometry(2, 1);
var material = new THREE.MeshStandardMaterial({
color: 0x98bbbd,
side: THREE.FrontSides,
roughness: 1,
metalness: 0.5,
envMap: cubeCamera.renderTarget
});
material.roughness = 0;
material.metalness = 1;
material.flatShading = true;
material.envMap = cubeCamera.renderTarget.texture;
var sphere = new THREE.Mesh(geometry, material);
scene.add(sphere);
console.log(sphere.position);
console.log(cubeCamera.position);
cubeCamera.position.copy(sphere.position);
cubeCamera.update(renderer, scene);
// FLOOR
var floorTexture = new THREE.ImageUtils.loadTexture('images/woman.png');
// floorTexture.wrapS = floorTexture.wrapT = THREE.RepeatWrapping;
// floorTexture.repeat.set(1000, 1000);
var floorMaterial = new THREE.MeshBasicMaterial({
map: floorTexture,
side: THREE.BackSide
});
var floorGeometry = new THREE.PlaneGeometry(5, 5, 1, 1);
var floor = new THREE.Mesh(floorGeometry, floorMaterial);
floor.position.y = 0;
floor.position.x = 0;
floor.position.z = 3;
scene.add(floor);
cubeCamera.lookAt(floor);
// CONTROLS
var orbit = new THREE.OrbitControls(camera, renderer.Mesh);
camera.position.z = 5;
// LIGHTS
var topLeftLight = new THREE.PointLight(0xffffff, 1, 1);
topLeftLight.position.set(-50, 50, -25);
scene.add(topLeftLight);
var topRightLight = new THREE.PointLight(0xffffff, 1, 10);
topRightLight.position.set(50, 150, -25);
scene.add(topRightLight);
var lightBottomRight = new THREE.PointLight(0xffffff, 1, 100);
lightBottomRight.position.set(40, -50, 25);
scene.add(lightBottomRight);
var lightBottomLeft = new THREE.PointLight(0xffffff, 1, 100);
lightBottomLeft.position.set(-40, -50, 25);
scene.add(lightBottomLeft);
var lightTopRight = new THREE.PointLight(0xffffff, 1, 100);
lightTopRight.position.set(40, 50, 25);
scene.add(lightTopRight);
var lightTopLeft = new THREE.PointLight(0xffffff, 1, 100);
lightTopLeft.position.set(-40, 50, 25);
scene.add(lightTopLeft);
var backLight = new THREE.PointLight(0xffffff, 1, 100);
backLight.position.set(0, 0, -25);
scene.add(backLight);
var light = new THREE.AmbientLight(0x404040, 2); // soft white light
scene.add(light);
// update function
function render() {
requestAnimationFrame(render);
sphere.rotation.x += 0.005;
sphere.rotation.y += 0.005;
sphere.visible = false;
cubeCamera.update(renderer, scene);
sphere.visible = true;
renderer.render(scene, camera);
}
render();
I would like to see a rotating IcosahedronGeometry which reflects an image on the front side. I tried adding a cube camera and pointing it at the PlaneGeometry with an image texture but nothing is reflecting.
I would like to simulate something like this, but it doesn't have to be exactly the same.
The desired result.
3 issues.
you have to call cubeCamera.update before you access cubeCamera.renderTarget.texture
The parameters to CubeCamera are new CubeCamera(near, far, size).
The code had new CubeCamera(75, 1000, 512) which means only things 75 to 1000 units away from the camera would be visible. The image plane you had is 3 units away so would not be visible.
You don't call lookAt with the CubeCamera as it's always looking in all directions.
var scene = new THREE.Scene();
var camera = new THREE.PerspectiveCamera(
75,
window.innerWidth / window.innerHeight,
0.1,
1000
);
// RENDERER
var renderer = new THREE.WebGLRenderer({
antialias: true
});
// RENDERER - SIZE OF CANVAS
renderer.setSize(window.innerWidth, window.innerHeight);
renderer.setClearColor('#ffffff');
document.body.appendChild(renderer.domElement);
// RESPONSIVE RENDERING
window.addEventListener('resize', () => {
renderer.setSize(window.innerWidth, window.innerHeight);
camera.aspect = window.innerWidth / window.innerHeight;
camera.updateProjectionMatrix();
});
var groundMaterial = new THREE.MeshPhongMaterial({
shininess: 100,
color: 0xffffff,
specular: 0xffffff
});
const cubeCamera = new THREE.CubeCamera(0.001, 10, 512);
scene.add(cubeCamera);
// GEOMETRY
var geometry = new THREE.IcosahedronGeometry(2, 1);
var material = new THREE.MeshStandardMaterial({
color: 0x98bbbd,
side: THREE.FrontSide,
roughness: 1,
metalness: 0.5,
});
cubeCamera.update(renderer, scene);
material.roughness = 0;
material.metalness = 1;
material.flatShading = true;
material.envMap = cubeCamera.renderTarget.texture;
var sphere = new THREE.Mesh(geometry, material);
scene.add(sphere);
// FLOOR
var loader = new THREE.TextureLoader();
var floorTexture = loader.load('https://i.imgur.com/UKBsvV0.jpg');
var floorMaterial = new THREE.MeshBasicMaterial({
map: floorTexture,
side: THREE.BackSide
});
var floorGeometry = new THREE.PlaneGeometry(5, 5, 1, 1);
var floor = new THREE.Mesh(floorGeometry, floorMaterial);
floor.position.y = 0;
floor.position.x = 0;
floor.position.z = 3;
scene.add(floor);
// CONTROLS
var orbit = new THREE.OrbitControls(camera, renderer.Mesh);
camera.position.z = 5;
// LIGHTS
var topLeftLight = new THREE.PointLight(0xffffff, 1, 1);
topLeftLight.position.set(-50, 50, -25);
scene.add(topLeftLight);
var topRightLight = new THREE.PointLight(0xffffff, 1, 10);
topRightLight.position.set(50, 150, -25);
scene.add(topRightLight);
var lightBottomRight = new THREE.PointLight(0xffffff, 1, 100);
lightBottomRight.position.set(40, -50, 25);
scene.add(lightBottomRight);
var lightBottomLeft = new THREE.PointLight(0xffffff, 1, 100);
lightBottomLeft.position.set(-40, -50, 25);
scene.add(lightBottomLeft);
var lightTopRight = new THREE.PointLight(0xffffff, 1, 100);
lightTopRight.position.set(40, 50, 25);
scene.add(lightTopRight);
var lightTopLeft = new THREE.PointLight(0xffffff, 1, 100);
lightTopLeft.position.set(-40, 50, 25);
scene.add(lightTopLeft);
var backLight = new THREE.PointLight(0xffffff, 1, 100);
backLight.position.set(0, 0, -25);
scene.add(backLight);
var light = new THREE.AmbientLight(0x404040, 2); // soft white light
scene.add(light);
// update function
function render() {
sphere.rotation.x += 0.005;
sphere.rotation.y += 0.005;
sphere.visible = false;
cubeCamera.update(renderer, scene);
sphere.visible = true;
renderer.render(scene, camera);
requestAnimationFrame(render);
}
render();
<script src="https://threejsfundamentals.org/threejs/resources/threejs/r105/three.min.js"></script>
<script src="https://threejsfundamentals.org/threejs/resources/threejs/r105/js/controls/OrbitControls.js"></script>
I have this code which should create a 3D form. The idea is that I have whatever coordinates stored into a vector in the same plan to which I should add a default height in order to make it 3D. As you can see I am a beginner in programming and this is the first time I use ThreeJS so can you tell me what am I doing wrong? Honestly I have no clue and I would like to know if there is another way of adding the default height to my 2D vector coordinates in order to make it 3D without using ThreeJS. Thank you!
$(document).ready(function(){
function storeCoordinate(x, y, array) {
array.push(x);
array.push(y);
}
var coords = [];
var z=500;
storeCoordinate(3, 5, coords);
storeCoordinate(10, 100, coords);
storeCoordinate(30, 120, coords);
storeCoordinate(3, 5, coords);
for (var i = 0; i < coords.length; i+=2) {
var x = coords[i];
var y = coords[i+1];
var canvas = document.getElementById('myCanvas');
var ctx = canvas.getContext('2d');
var shape = new THREE.Shape( coords );
ctx.moveTo(coords[i],coords[i+1]);
ctx.lineTo(coords[i+2],coords[i+3]);
ctx.stroke();
}
var render,mycanvas,scene,camera,renderer,light;
init();
animate();
function init(){
scene = new THREE.Scene();
camera = new THREE.PerspectiveCamera( 75, window.innerWidth/window.innerHeight, 1, 1000 );
var extrudedGeometry = new THREE.ExtrudeGeometry(shape, {amount: 5, bevelEnabled: false});
var extrudedMesh = new THREE.Mesh(extrudedGeometry, new THREE.MeshPhongMaterial({color: 0xff0000}));
scene.add(extrudedMesh);
document.body.onmousemove = function(e){
extrudedMesh.rotation.z = e.pageX / 100;
extrudedMesh.rotation.x = e.pageY / 100;
}
//lights
dirLight = new THREE.DirectionalLight(0xffffff);
dirLight.intensity = .9;
dirLight.position.set(500, 140, 500);
dirLight.castShadow = true;
dirLight.shadowMapHeight = 2048
dirLight.shadowMapWidth = 2048
dirLight.shadowDarkness = .15
spotLight = new THREE.PointLight( 0xffffff );
spotLight.intensity = .5
spotLight.position.set( -500, 140, -500 );
camera.add( spotLight)
camera.add(dirLight);
lighthelper = new THREE.DirectionalLightHelper(dirLight, 20);
lighthelper.children[1].material.color.set(0,0,0)
lighthelper.visible = false;
scene.add(lighthelper);
ambientLight = new THREE.AmbientLight( 0x020202, 1 );
scene.add( ambientLight );
light = new THREE.PointLight(0xffffff);
light.position.set(-100,200,100);
scene.add(light);
renderer = new THREE.WebGLRenderer({canvas: mycanvas});
renderer.setSize( window.innerWidth, window.innerHeight );
document.body.appendChild( renderer.domElement );
controls = new THREE.OrbitControls(camera, renderer.domElement);
controls.autoRotate = true;
controls.enableZoom = true;
controls.enablePan = true;
controls.rotateSpeed = 3.0;
controls.zoomSpeed = 1.0;
controls.panSpeed = 2.0;
controls.enableDamping = true;
controls.dampingFactor = 0.25;
controls.minDistance = 1.1;
controls.maxDistance = 1000;
controls.keys = [65, 83, 68]; // [ rotateKey, zoomKey, panKey ]
}
function animate() {
window.requestAnimationFrame( animate );
render();
}
function render() {
renderer.render( scene, camera );
}
var loader = new THREE.OBJLoader();
});
Just an option of how you can do it, using THREE.ExtrudeGeometry():
var scene = new THREE.Scene();
var camera = new THREE.PerspectiveCamera(60, window.innerWidth / window.innerHeight, 1, 1000);
camera.position.set(0, 0, 3);
var renderer = new THREE.WebGLRenderer({
antialias: true
});
renderer.setSize(window.innerWidth, window.innerHeight);
document.body.appendChild(renderer.domElement);
var controls = new THREE.OrbitControls(camera, renderer.domElement);
var grid = new THREE.GridHelper(5, 10, "white", "gray");
grid.geometry.rotateX(Math.PI * 0.5);
scene.add(grid);
var points = [
new THREE.Vector2(0, 1),
new THREE.Vector2(1, 1),
new THREE.Vector2(1, 0)
]
var shape = new THREE.Shape(points);
var extrudeGeom = new THREE.ExtrudeGeometry(shape, {
amount: 0.5,
bevelEnabled: false
});
var mesh = new THREE.Mesh(extrudeGeom, new THREE.MeshBasicMaterial({
color: "aqua",
wireframe: true
}));
scene.add(mesh);
render();
function render() {
requestAnimationFrame(render)
renderer.render(scene, camera);
}
body {
overflow: hidden;
margin: 0;
}
<script src="https://cdnjs.cloudflare.com/ajax/libs/three.js/92/three.min.js"></script>
<script src="https://threejs.org/examples/js/controls/OrbitControls.js"></script>
I want to have shadows, I set as follows, really wondering what's the problem? I have a grid, with cubic and sphere as a child of it, and also I set the castShadow and Receive shadow for them but it has no result for shadow.
some parts of my code:
var camera, scene, renderer, dice, dice1;
scene = new THREE.Scene();
camera = new THREE.PerspectiveCamera(35,window.innerWidth/window.innerHeight, 0.1, 1000);
// Z is up for objects intended to be 3D printed.
camera.up.set(0, 0, 1);
scene.add(camera);
renderer = new THREE.WebGLRenderer({antialias: true});
renderer.setClearColor(0x999999);
renderer.setPixelRatio(window.devicePixelRatio);
renderer.setSize(window.innerWidth, window.innerHeight);
renderer.shadowMap.enabled = true;
renderer.shadowMap.type = THREE.PCFSoftShadowMap;
document.body.appendChild(renderer.domElement);
var light = new THREE.PointLight(0x000000, 1, 1000);
light.position.set(10, 10,10);
light.castShadow = true; // default false
scene.add(light);
//Set up shadow properties for the light;
light.shadow.mapSize.width = 1024; // default
light.shadow.mapSize.height = 1024; // default
light.shadow.camera.near = 1; // default
light.shadow.camera.far = 1000 // default
var grid = new THREE.GridHelper(50, 50, 0xffffff, 0x555555);
grid.colorGrid = 0x00ff00;
grid.rotateOnAxis(new THREE.Vector3(1, 0, 0), 90 * (Math.PI / 180));
scene.add(grid);
objects.push(grid); // add to the array for DragControls
grid.receiveShadow=true;
//Create a sphere that cast shadows (but does not receive them)
var sphere = new THREE.Mesh(sphereGeometry, sphereMaterial);
sphere.castShadow = true; //default is false
sphere.receiveShadow = false; //default
sphere.position.set(10, 15, 10);
scene.add(sphere);
//initializing the color cubic
var material = new THREE.MeshBasicMaterial({
color: 0xff0000});
dice = new THREE.Mesh(new THREE.BoxGeometry(5, 5, 5, 1, 1, 1), material);
dice.position.set(10, 2.5, 10);
dice.castShadow = true;
grid.add(dice);
You cannot cast shadow on a grid. it is just lines.
Add this in your code to see shadows.
var plane = new THREE.Mesh(new THREE.PlaneGeometry(50,50), new THREE.MeshStandardMaterial( {color: 0x00ff00 }));
plane.castShadow = false;
plane.receiveShadow = true;
plane.position.set(0, 0, -1);
scene.add(plane);
Okay. I'm clearly missing something here. I'm simply trying to get this code to cast shadows. I've turned on receive shadows and cast shadows for the cube and the floor but it still isn't showing. This shouldn't be this hard. I've used casting shadows before however I'm clearing missing something here. Any ideas would help. I'm at a loss because I know casting shadows isn't that hard. I must be missing something obvious.
Thanks in advance.
var camera, scene, renderer;
var RED = 0xff3300;
init();
render();
function init() {
renderer = new THREE.WebGLRenderer();
//renderer.setPixelRatio( window.devicePixelRatio );
renderer.setSize(window.innerWidth, window.innerHeight);
-
document.body.appendChild(renderer.domElement);
camera = new THREE.PerspectiveCamera(70, window.innerWidth / window.innerHeight, 1, 15000);
camera.position.set(1000, 500, 1000);
camera.lookAt(new THREE.Vector3(0, 200, 0));
scene = new THREE.Scene();
scene.background = new THREE.Color(0xcccccc);
var light = new THREE.SpotLight(0xdddddd, 1);
light.position.set(50, 600, 50);
scene.add(light);
var coloredCube = createCube(100, 100, 100, 0, 300, 0, 0, RED);
coloredCube.castShadow = true;
coloredCube.receiveShadow = true;
scene.add(coloredCube);
//create floor
var planeFloor = createSizedPlane(1000, 1000);
planeFloor = preparePlaneForScene(planeFloor, Math.PI / -2, 0, 0, 0, 0, 0);
planeFloor.castShadow = true;
planeFloor.receiveShadow = true;
scene.add(planeFloor);
}
function render() {
renderer.render(scene, camera);
}
function createSizedPlane(xSize, zSize, numberOfSegments) {
var planeGeometry = new THREE.PlaneGeometry(xSize, zSize, numberOfSegments);
planeGeometry.receiveShadow = true;
planeGeometry.castShadow = true;
var material = new THREE.MeshStandardMaterial({
roughness: 0.8,
color: 0xffffff,
metalness: 0.2,
bumpScale: 0.0005,
opacity: 1, transparent: false
}
);
return new THREE.Mesh(planeGeometry, material);
}
function preparePlaneForScene(plane, xRotation, yRotation, zRotation, xPosition, yPosition, zPosition) {
plane.rotation.x = xRotation;
plane.rotation.y = yRotation;
plane.rotation.z = zRotation;
plane.position.x = xPosition;
plane.position.y = yPosition;
plane.position.z = zPosition;
return plane;
}
function createCube(xSize, ySize, zSize, xPosition, yPosition, zPosition, yRotation, color) {
var cubeGeometry = new THREE.BoxGeometry(xSize, ySize, zSize);
var cubeMaterial = new THREE.MeshLambertMaterial({color: color});
var cube = new THREE.Mesh(cubeGeometry, cubeMaterial);
cube.position.x = xPosition;
cube.position.y = yPosition;
cube.position.z = zPosition;
cube.rotation.y = yRotation;
cube.castShadow = true;
cube.receiveShadow = true;
return cube;
}
Enable shadowMap for renderer and casting shadow for light:
renderer.shadowMap.enabled = true;
renderer.shadowMap.type = THREE.PCFShadowMap;
spotLight.castShadow = true;
spotLight.shadow = new THREE.LightShadow(new THREE.PerspectiveCamera(60, 1, 1, 2500));
spotLight.shadow.bias = 0.0001;
spotLight.shadow.mapSize.width = 1024;
spotLight.shadow.mapSize.height = 1024;
THREE.SpotLightShadow should work too.
For directional light you would need orthographic projection (or use THREE.DirectionalLightShadow).
My code is :
$(function() {
var scene = new THREE.Scene();
var camera = new THREE.PerspectiveCamera(75, window.innerWidth / window.innerHeight, 0.1, 1000);
var renderer = new THREE.WebGLRenderer({antialias: true});
renderer.setClearColor(0xdddddd);
renderer.setSize(window.innerWidth, window.innerHeight);
renderer.shadowMap.enabled = true;
renderer.shadowMapSoft = true;
var axis = new THREE.AxisHelper(10);
scene.add(axis);
var grid = new THREE.GridHelper(50, 5);
var color = new THREE.Color("rgb(255,0,0)");
grid.setColors(color, 0x000000);
scene.add(grid);
var Ground_geometry = new THREE.BoxGeometry( 20, 0.1, 20 );
var Ground_material = new THREE.MeshPhongMaterial( {
color: 0xa0adaf,
shininess: 150,
specular: 0xffffff,
shading: THREE.SmoothShading
} );
var ground = new THREE.Mesh( Ground_geometry, Ground_material );
ground.scale.multiplyScalar( 3 );
ground.castShadow = false;
ground.receiveShadow = true;
scene.add( ground );
var ambient = new THREE.AmbientLight( 0x404040 );
scene.add( ambient );
spotLight = new THREE.SpotLight( 0xffffff );
spotLight.position.set( 10, 10, 15 );
spotLight.castShadow = true;
spotLight.shadowCameraNear = 8;
spotLight.shadowCameraFar = 30;
spotLight.shadowDarkness = 0.5;
spotLight.shadowCameraVisible = false;
spotLight.shadowMapWidth = 1024;
spotLight.shadowMapHeight = 1024;
spotLight.name = 'Spot Light';
scene.add( spotLight );
var controls = new THREE.OrbitControls( camera, renderer.domElement );
controls.addEventListener( 'change', renderer );
var cubeGeometry = new THREE.BoxGeometry(5, 5, 5);
var cubeMaterial = new THREE.MeshPhongMaterial({
color: 0x456574 ,
shininess: 150,
specular: 0x222222,
shading: THREE.SmoothShading,
});
var cube = new THREE.Mesh(cubeGeometry, cubeMaterial);
cube.position.x = 0;
cube.position.y = 0;
cube.position.z = 0;
scene.add(cube);
camera.position.x = 40;
camera.position.y = 40;
camera.position.z = 40;
camera.lookAt(scene.position);
renderer.render(scene, camera);
$("#webGL-container").append(renderer.domElement);
$(window).resize(function(){
SCREEN_WIDTH = window.innerWidth;
SCREEN_HEIGHT = window.innerHeight;
camera.aspect = SCREEN_WIDTH / SCREEN_HEIGHT;
camera.updateProjectionMatrix();
renderer.setSize( SCREEN_WIDTH, SCREEN_HEIGHT );
});
});
I am getting an error that says : TypeError: array[i].call is not a function
and is pointing to line 7484 of three.js library.
I have included the three.js library using:
<script src="https://cdnjs.cloudflare.com/ajax/libs/three.js/r73/three.js"></script>
So as you can see, its the v73 and I haven't touched the code. What could be the problem?
The error only comes after screen is clicked and then mouse pointer is dragged, so it must have got to do with that piece of code.
Assuming that you want the scene to render when OrbitControls sends a change event, you'll have to change the code to:
controls.addEventListener( 'change', render );
.
.
.
function render() {
renderer.render( scene, camera );
}
renderer.render( scene, camera );