I have been playing with ES6 for a while and I noticed that while variables declared with var are hoisted as expected...
console.log(typeof name); // undefined
var name = "John";
...variables declared with let or const seem to have some problems with hoisting:
console.log(typeof name); // ReferenceError
let name = "John";
and
console.log(typeof name); // ReferenceError
const name = "John";
Does this mean that variables declared with let or const are not hoisted? What is really going on here? Is there any difference between let and const in this matter?
#thefourtheye is correct in saying that these variables cannot be accessed before they are declared. However, it's a bit more complicated than that.
Are variables declared with let or const not hoisted? What is really going on here?
All declarations (var, let, const, function, function*, class) are "hoisted" in JavaScript. This means that if a name is declared in a scope, in that scope the identifier will always reference that particular variable:
x = "global";
// function scope:
(function() {
x; // not "global"
var/let/… x;
}());
// block scope (not for `var`s):
{
x; // not "global"
let/const/… x;
}
This is true both for function and block scopes1.
The difference between var/function/function* declarations and let/const/class declarations is the initialisation.
The former are initialised with undefined or the (generator) function right when the binding is created at the top of the scope. The lexically declared variables however stay uninitialised. This means that a ReferenceError exception is thrown when you try to access it. It will only get initialised when the let/const/class statement is evaluated, everything before (above) that is called the temporal dead zone.
x = y = "global";
(function() {
x; // undefined
y; // Reference error: y is not defined
var x = "local";
let y = "local";
}());
Notice that a let y; statement initialises the variable with undefined like let y = undefined; would have.
The temporal dead zone is not a syntactic location, but rather the time between the variable (scope) creation and the initialisation. It's not an error to reference the variable in code above the declaration as long as that code is not executed (e.g. a function body or simply dead code), and it will throw an exception if you access the variable before the initialisation even if the accessing code is below the declaration (e.g. in a hoisted function declaration that is called too early).
Is there any difference between let and const in this matter?
No, they work the same as far as hoisting is regarded. The only difference between them is that a constant must be and can only be assigned in the initialiser part of the declaration (const one = 1;, both const one; and later reassignments like one = 2 are invalid).
1: var declarations are still working only on the function level, of course
Quoting ECMAScript 6 (ECMAScript 2015) specification's, let and const declarations section,
The variables are created when their containing Lexical Environment is instantiated but may not be accessed in any way until the variable’s LexicalBinding is evaluated.
So, to answer your question, yes, let and const hoist but you cannot access them before the actual declaration is evaluated at runtime.
ES6 introduces Let variables which comes up with block level scoping. Until ES5 we did not have block level scoping, so the variables which are declared inside a block are always hoisted to function level scoping.
Basically Scope refers to where in your program your variables are visible, which determines where you are allowed to use variables you have declared. In ES5 we have global scope,function scope and try/catch scope, with ES6 we also get the block level scoping by using Let.
When you define a variable with var keyword, it's known the entire function from the moment it's defined.
When you define a variable with let statement it's only known in the block it's defined.
function doSomething(arr){
//i is known here but undefined
//j is not known here
console.log(i);
console.log(j);
for(var i=0; i<arr.length; i++){
//i is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
for(let j=0; j<arr.length; j++){
//j is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
}
doSomething(["Thalaivar", "Vinoth", "Kabali", "Dinesh"]);
If you run the code, you could see the variable j is only known in the loop and not before and after. Yet, our variable i is known in the entire function from the moment it is defined onward.
There is another great advantage using let as it creates a new lexical environment and also binds fresh value rather than keeping an old reference.
for(var i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
for(let i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
The first for loop always print the last value, with let it creates a new scope and bind fresh values printing us 1, 2, 3, 4, 5.
Coming to constants, it work basically like let, the only difference is their value can't be changed. In constants mutation is allowed but reassignment is not allowed.
const foo = {};
foo.bar = 42;
console.log(foo.bar); //works
const name = []
name.push("Vinoth");
console.log(name); //works
const age = 100;
age = 20; //Throws Uncaught TypeError: Assignment to constant variable.
console.log(age);
If a constant refers to an object, it will always refer to the object but the object itself can be changed (if it is mutable). If you like to have an immutable object, you could use Object.freeze([])
As per ECMAScript® 2021
Let and Const Declarations
let and const declarations define variables that are scoped to the running execution context's LexicalEnvironment.
The variables are created when their containing Environment Record is instantiated but may not be accessed in any way until the variable's LexicalBinding is evaluated.
A variable defined by a LexicalBinding with an Initializer is assigned the value of its Initializer's AssignmentExpression when the LexicalBinding is evaluated, not when the variable is created.
If a LexicalBinding in a let declaration does not have an Initializer the variable is assigned the value undefined when the LexicalBinding is evaluated.
Block Declaration Instantiation
When a Block or CaseBlock is evaluated a new declarative Environment Record is created and bindings for each block scoped variable, constant, function, or class declared in the block are instantiated in the Environment Record.
No matter how control leaves the Block the LexicalEnvironment is always restored to its former state.
Top Level Lexically Declared Names
At the top level of a function, or script, function declarations are treated like var declarations rather than like lexical declarations.
Conclusion
let and const are hoisted but not initialized.
Referencing the variable in the block before the variable declaration results in a ReferenceError, because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
Examples below make it clear as to how "let" variables behave in a lexical scope/nested-lexical scope.
Example 1
var a;
console.log(a); //undefined
console.log(b); //undefined
var b;
let x;
console.log(x); //undefined
console.log(y); // Uncaught ReferenceError: y is not defined
let y;
The variable 'y' gives a referenceError, that doesn't mean it's not hoisted. The variable is created when the containing environment is instantiated. But it may not be accessed bcz of it being in an inaccessible "temporal dead zone".
Example 2
let mylet = 'my value';
(function() {
//let mylet;
console.log(mylet); // "my value"
mylet = 'local value';
})();
Example 3
let mylet = 'my value';
(function() {
let mylet;
console.log(mylet); // undefined
mylet = 'local value';
})();
In Example 3, the freshly declared "mylet" variable inside the function does not have an Initializer before the log statement, hence the value "undefined".
Source
ECMA
MDN
From MDN web docs:
In ECMAScript 2015, let and const are hoisted but not initialized. Referencing the variable in the block before the variable declaration results in a ReferenceError because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
console.log(x); // ReferenceError
let x = 3;
in es6 when we use let or const we have to declare the variable before using them.
eg. 1 -
// this will work
u = 10;
var u;
// this will give an error
k = 10;
let k; // ReferenceError: Cannot access 'k' before initialization.
eg. 2-
// this code works as variable j is declared before it is used.
function doSmth() {
j = 9;
}
let j;
doSmth();
console.log(j); // 9
let and const are also hoisted.
But an exception will be thrown if a variable declared with let or const is read before it is initialised due to below reasons.
Unlike var, they are not initialised with a default value while hoisting.
They cannot be read/written until they have been fully initialised.
Related
I have been playing with ES6 for a while and I noticed that while variables declared with var are hoisted as expected...
console.log(typeof name); // undefined
var name = "John";
...variables declared with let or const seem to have some problems with hoisting:
console.log(typeof name); // ReferenceError
let name = "John";
and
console.log(typeof name); // ReferenceError
const name = "John";
Does this mean that variables declared with let or const are not hoisted? What is really going on here? Is there any difference between let and const in this matter?
#thefourtheye is correct in saying that these variables cannot be accessed before they are declared. However, it's a bit more complicated than that.
Are variables declared with let or const not hoisted? What is really going on here?
All declarations (var, let, const, function, function*, class) are "hoisted" in JavaScript. This means that if a name is declared in a scope, in that scope the identifier will always reference that particular variable:
x = "global";
// function scope:
(function() {
x; // not "global"
var/let/… x;
}());
// block scope (not for `var`s):
{
x; // not "global"
let/const/… x;
}
This is true both for function and block scopes1.
The difference between var/function/function* declarations and let/const/class declarations is the initialisation.
The former are initialised with undefined or the (generator) function right when the binding is created at the top of the scope. The lexically declared variables however stay uninitialised. This means that a ReferenceError exception is thrown when you try to access it. It will only get initialised when the let/const/class statement is evaluated, everything before (above) that is called the temporal dead zone.
x = y = "global";
(function() {
x; // undefined
y; // Reference error: y is not defined
var x = "local";
let y = "local";
}());
Notice that a let y; statement initialises the variable with undefined like let y = undefined; would have.
The temporal dead zone is not a syntactic location, but rather the time between the variable (scope) creation and the initialisation. It's not an error to reference the variable in code above the declaration as long as that code is not executed (e.g. a function body or simply dead code), and it will throw an exception if you access the variable before the initialisation even if the accessing code is below the declaration (e.g. in a hoisted function declaration that is called too early).
Is there any difference between let and const in this matter?
No, they work the same as far as hoisting is regarded. The only difference between them is that a constant must be and can only be assigned in the initialiser part of the declaration (const one = 1;, both const one; and later reassignments like one = 2 are invalid).
1: var declarations are still working only on the function level, of course
Quoting ECMAScript 6 (ECMAScript 2015) specification's, let and const declarations section,
The variables are created when their containing Lexical Environment is instantiated but may not be accessed in any way until the variable’s LexicalBinding is evaluated.
So, to answer your question, yes, let and const hoist but you cannot access them before the actual declaration is evaluated at runtime.
ES6 introduces Let variables which comes up with block level scoping. Until ES5 we did not have block level scoping, so the variables which are declared inside a block are always hoisted to function level scoping.
Basically Scope refers to where in your program your variables are visible, which determines where you are allowed to use variables you have declared. In ES5 we have global scope,function scope and try/catch scope, with ES6 we also get the block level scoping by using Let.
When you define a variable with var keyword, it's known the entire function from the moment it's defined.
When you define a variable with let statement it's only known in the block it's defined.
function doSomething(arr){
//i is known here but undefined
//j is not known here
console.log(i);
console.log(j);
for(var i=0; i<arr.length; i++){
//i is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
for(let j=0; j<arr.length; j++){
//j is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
}
doSomething(["Thalaivar", "Vinoth", "Kabali", "Dinesh"]);
If you run the code, you could see the variable j is only known in the loop and not before and after. Yet, our variable i is known in the entire function from the moment it is defined onward.
There is another great advantage using let as it creates a new lexical environment and also binds fresh value rather than keeping an old reference.
for(var i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
for(let i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
The first for loop always print the last value, with let it creates a new scope and bind fresh values printing us 1, 2, 3, 4, 5.
Coming to constants, it work basically like let, the only difference is their value can't be changed. In constants mutation is allowed but reassignment is not allowed.
const foo = {};
foo.bar = 42;
console.log(foo.bar); //works
const name = []
name.push("Vinoth");
console.log(name); //works
const age = 100;
age = 20; //Throws Uncaught TypeError: Assignment to constant variable.
console.log(age);
If a constant refers to an object, it will always refer to the object but the object itself can be changed (if it is mutable). If you like to have an immutable object, you could use Object.freeze([])
As per ECMAScript® 2021
Let and Const Declarations
let and const declarations define variables that are scoped to the running execution context's LexicalEnvironment.
The variables are created when their containing Environment Record is instantiated but may not be accessed in any way until the variable's LexicalBinding is evaluated.
A variable defined by a LexicalBinding with an Initializer is assigned the value of its Initializer's AssignmentExpression when the LexicalBinding is evaluated, not when the variable is created.
If a LexicalBinding in a let declaration does not have an Initializer the variable is assigned the value undefined when the LexicalBinding is evaluated.
Block Declaration Instantiation
When a Block or CaseBlock is evaluated a new declarative Environment Record is created and bindings for each block scoped variable, constant, function, or class declared in the block are instantiated in the Environment Record.
No matter how control leaves the Block the LexicalEnvironment is always restored to its former state.
Top Level Lexically Declared Names
At the top level of a function, or script, function declarations are treated like var declarations rather than like lexical declarations.
Conclusion
let and const are hoisted but not initialized.
Referencing the variable in the block before the variable declaration results in a ReferenceError, because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
Examples below make it clear as to how "let" variables behave in a lexical scope/nested-lexical scope.
Example 1
var a;
console.log(a); //undefined
console.log(b); //undefined
var b;
let x;
console.log(x); //undefined
console.log(y); // Uncaught ReferenceError: y is not defined
let y;
The variable 'y' gives a referenceError, that doesn't mean it's not hoisted. The variable is created when the containing environment is instantiated. But it may not be accessed bcz of it being in an inaccessible "temporal dead zone".
Example 2
let mylet = 'my value';
(function() {
//let mylet;
console.log(mylet); // "my value"
mylet = 'local value';
})();
Example 3
let mylet = 'my value';
(function() {
let mylet;
console.log(mylet); // undefined
mylet = 'local value';
})();
In Example 3, the freshly declared "mylet" variable inside the function does not have an Initializer before the log statement, hence the value "undefined".
Source
ECMA
MDN
From MDN web docs:
In ECMAScript 2015, let and const are hoisted but not initialized. Referencing the variable in the block before the variable declaration results in a ReferenceError because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
console.log(x); // ReferenceError
let x = 3;
in es6 when we use let or const we have to declare the variable before using them.
eg. 1 -
// this will work
u = 10;
var u;
// this will give an error
k = 10;
let k; // ReferenceError: Cannot access 'k' before initialization.
eg. 2-
// this code works as variable j is declared before it is used.
function doSmth() {
j = 9;
}
let j;
doSmth();
console.log(j); // 9
let and const are also hoisted.
But an exception will be thrown if a variable declared with let or const is read before it is initialised due to below reasons.
Unlike var, they are not initialised with a default value while hoisting.
They cannot be read/written until they have been fully initialised.
I have been playing with ES6 for a while and I noticed that while variables declared with var are hoisted as expected...
console.log(typeof name); // undefined
var name = "John";
...variables declared with let or const seem to have some problems with hoisting:
console.log(typeof name); // ReferenceError
let name = "John";
and
console.log(typeof name); // ReferenceError
const name = "John";
Does this mean that variables declared with let or const are not hoisted? What is really going on here? Is there any difference between let and const in this matter?
#thefourtheye is correct in saying that these variables cannot be accessed before they are declared. However, it's a bit more complicated than that.
Are variables declared with let or const not hoisted? What is really going on here?
All declarations (var, let, const, function, function*, class) are "hoisted" in JavaScript. This means that if a name is declared in a scope, in that scope the identifier will always reference that particular variable:
x = "global";
// function scope:
(function() {
x; // not "global"
var/let/… x;
}());
// block scope (not for `var`s):
{
x; // not "global"
let/const/… x;
}
This is true both for function and block scopes1.
The difference between var/function/function* declarations and let/const/class declarations is the initialisation.
The former are initialised with undefined or the (generator) function right when the binding is created at the top of the scope. The lexically declared variables however stay uninitialised. This means that a ReferenceError exception is thrown when you try to access it. It will only get initialised when the let/const/class statement is evaluated, everything before (above) that is called the temporal dead zone.
x = y = "global";
(function() {
x; // undefined
y; // Reference error: y is not defined
var x = "local";
let y = "local";
}());
Notice that a let y; statement initialises the variable with undefined like let y = undefined; would have.
The temporal dead zone is not a syntactic location, but rather the time between the variable (scope) creation and the initialisation. It's not an error to reference the variable in code above the declaration as long as that code is not executed (e.g. a function body or simply dead code), and it will throw an exception if you access the variable before the initialisation even if the accessing code is below the declaration (e.g. in a hoisted function declaration that is called too early).
Is there any difference between let and const in this matter?
No, they work the same as far as hoisting is regarded. The only difference between them is that a constant must be and can only be assigned in the initialiser part of the declaration (const one = 1;, both const one; and later reassignments like one = 2 are invalid).
1: var declarations are still working only on the function level, of course
Quoting ECMAScript 6 (ECMAScript 2015) specification's, let and const declarations section,
The variables are created when their containing Lexical Environment is instantiated but may not be accessed in any way until the variable’s LexicalBinding is evaluated.
So, to answer your question, yes, let and const hoist but you cannot access them before the actual declaration is evaluated at runtime.
ES6 introduces Let variables which comes up with block level scoping. Until ES5 we did not have block level scoping, so the variables which are declared inside a block are always hoisted to function level scoping.
Basically Scope refers to where in your program your variables are visible, which determines where you are allowed to use variables you have declared. In ES5 we have global scope,function scope and try/catch scope, with ES6 we also get the block level scoping by using Let.
When you define a variable with var keyword, it's known the entire function from the moment it's defined.
When you define a variable with let statement it's only known in the block it's defined.
function doSomething(arr){
//i is known here but undefined
//j is not known here
console.log(i);
console.log(j);
for(var i=0; i<arr.length; i++){
//i is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
for(let j=0; j<arr.length; j++){
//j is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
}
doSomething(["Thalaivar", "Vinoth", "Kabali", "Dinesh"]);
If you run the code, you could see the variable j is only known in the loop and not before and after. Yet, our variable i is known in the entire function from the moment it is defined onward.
There is another great advantage using let as it creates a new lexical environment and also binds fresh value rather than keeping an old reference.
for(var i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
for(let i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
The first for loop always print the last value, with let it creates a new scope and bind fresh values printing us 1, 2, 3, 4, 5.
Coming to constants, it work basically like let, the only difference is their value can't be changed. In constants mutation is allowed but reassignment is not allowed.
const foo = {};
foo.bar = 42;
console.log(foo.bar); //works
const name = []
name.push("Vinoth");
console.log(name); //works
const age = 100;
age = 20; //Throws Uncaught TypeError: Assignment to constant variable.
console.log(age);
If a constant refers to an object, it will always refer to the object but the object itself can be changed (if it is mutable). If you like to have an immutable object, you could use Object.freeze([])
As per ECMAScript® 2021
Let and Const Declarations
let and const declarations define variables that are scoped to the running execution context's LexicalEnvironment.
The variables are created when their containing Environment Record is instantiated but may not be accessed in any way until the variable's LexicalBinding is evaluated.
A variable defined by a LexicalBinding with an Initializer is assigned the value of its Initializer's AssignmentExpression when the LexicalBinding is evaluated, not when the variable is created.
If a LexicalBinding in a let declaration does not have an Initializer the variable is assigned the value undefined when the LexicalBinding is evaluated.
Block Declaration Instantiation
When a Block or CaseBlock is evaluated a new declarative Environment Record is created and bindings for each block scoped variable, constant, function, or class declared in the block are instantiated in the Environment Record.
No matter how control leaves the Block the LexicalEnvironment is always restored to its former state.
Top Level Lexically Declared Names
At the top level of a function, or script, function declarations are treated like var declarations rather than like lexical declarations.
Conclusion
let and const are hoisted but not initialized.
Referencing the variable in the block before the variable declaration results in a ReferenceError, because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
Examples below make it clear as to how "let" variables behave in a lexical scope/nested-lexical scope.
Example 1
var a;
console.log(a); //undefined
console.log(b); //undefined
var b;
let x;
console.log(x); //undefined
console.log(y); // Uncaught ReferenceError: y is not defined
let y;
The variable 'y' gives a referenceError, that doesn't mean it's not hoisted. The variable is created when the containing environment is instantiated. But it may not be accessed bcz of it being in an inaccessible "temporal dead zone".
Example 2
let mylet = 'my value';
(function() {
//let mylet;
console.log(mylet); // "my value"
mylet = 'local value';
})();
Example 3
let mylet = 'my value';
(function() {
let mylet;
console.log(mylet); // undefined
mylet = 'local value';
})();
In Example 3, the freshly declared "mylet" variable inside the function does not have an Initializer before the log statement, hence the value "undefined".
Source
ECMA
MDN
From MDN web docs:
In ECMAScript 2015, let and const are hoisted but not initialized. Referencing the variable in the block before the variable declaration results in a ReferenceError because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
console.log(x); // ReferenceError
let x = 3;
in es6 when we use let or const we have to declare the variable before using them.
eg. 1 -
// this will work
u = 10;
var u;
// this will give an error
k = 10;
let k; // ReferenceError: Cannot access 'k' before initialization.
eg. 2-
// this code works as variable j is declared before it is used.
function doSmth() {
j = 9;
}
let j;
doSmth();
console.log(j); // 9
let and const are also hoisted.
But an exception will be thrown if a variable declared with let or const is read before it is initialised due to below reasons.
Unlike var, they are not initialised with a default value while hoisting.
They cannot be read/written until they have been fully initialised.
Consider the following example of shadowing in JavaScript:
let a = 99;
{
var a = 10;
let b = 11;
const c = 200;
console.log(a);
}
console.log(a);
Here I get the following error:
SyntaxError: Identifier 'a' has already been declared
But in the following case, there is no syntax error and the code is completely valid.
var a = 99;
{
let a = 10;
let b = 11;
const c = 200;
console.log(a);
}
console.log(a);
In the second case var a is declared in global scope and let a is in block scope.
But why this is not valid in first case?
There, let a will be declared in separate scope and var a should be declared in the global scope.
Why this case is invalid?
But why this is not valid in first case?
Because both of those declarations are in the same scope.¹ Your second example works because the let is scoped only to the block, not to the scope outside the block where var a exists. (Just like a local variable in a function.) So in the second example, it's shadowing. In the first example, it wouldn't be shadowing, it would be duplication, which you can't do with let (even if the other declaration uses var). (You can use var to declare a variable more than once in the same scope. The subsequent vars are ignored, though any initializer on the variable is converted to an assignment. E.g., var a; var a = 42; is identical to var a; a = 42;)
¹ Okay, so technically, it's a bit more complicated than that. var variables exist in an "outer" global lexical environment that holds bindings (loosely, variables) on the global object, but let variables exist on an "inner" global lexical environment that doesn't hold its bindings on the global object. Global scope is still just one scope, so as you've seen you can't have var a and let a both at global scope because they conflict with each other. But there are other ways to create "outer" global variables, such as assigning to a property on window (or this at global scope, or globalThis in modern environments):
// At global scope
window.a = 42; // Creates binding in the outer global environment
console.log(a); // Shows 42
which means it's possible to create a binding in both the outer and inner global lexical environments:
// At global scope
window.a = 42; // Creates binding in the outer global environment
let a = "answer"; // Creates binding in the inner global environment
console.log(a); // Shows "answer"
Since the inner one is closer to the code doing the console.log(a), the above outputs "answer".
Fun fact: Depending on how you count, on browsers there are somewhere between two and six layers to "the" global environment.😮
I was playing with some code and ran into a situation where I couldn't identify why 'let' is behaving the way it does.
For the below block of code:
var x = 20; // global scope
function f() {
let x = x || 30;
}
f(); // VM3426:1 Uncaught ReferenceError: x is not defined(…)
I get the error 'x is not defined' on executing f(). I do understand 'let' variables are not hoisted but since 'x' has a global copy, why isn't the line inside function 'f' defaulting to global copy instead of throwing an error?
Does 'let' set the variable to undeclared (instead of 'undefined' with var because of hoisting) at the beginning of the function?
Is there any way to get the global copy of 'x' within the function?
The exception is about the right side x - when you are initializing block-scope x variable the global one is already "forgotten" however the new one is still not being declared and cannot be used during initialization
Compare with explicit calling global one
function f() {
let x = window.x || 30;
}
Also take a look at this MDN article about let dead zones
let allows you to declare variables that are limited in scope to the block, statement, or expression on which it is used. This is unlike the var keyword, which defines a variable globally, or locally to an entire function regardless of block scope.
Here in your case, an exception is thrown because you are defining let with the same name.
For More Info
you can use this keyword to access global scope
var x= 20; // global scope
function f() {
let x =this.x || 30;
}
f();
but In strict mode this will default undefined
Read it https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Operators/this
The declaration of the local x is shadowing the global one and new one is still not declared first and cannot be used during initialization. It is same situation like following :
var foo = 5;
function do_something() {
console.log(foo); // ReferenceError
let foo = 2;
}
do_something();
For reference MDN
As suggested by #m.antkowicz you can use window.x in your case.
I have been playing with ES6 for a while and I noticed that while variables declared with var are hoisted as expected...
console.log(typeof name); // undefined
var name = "John";
...variables declared with let or const seem to have some problems with hoisting:
console.log(typeof name); // ReferenceError
let name = "John";
and
console.log(typeof name); // ReferenceError
const name = "John";
Does this mean that variables declared with let or const are not hoisted? What is really going on here? Is there any difference between let and const in this matter?
#thefourtheye is correct in saying that these variables cannot be accessed before they are declared. However, it's a bit more complicated than that.
Are variables declared with let or const not hoisted? What is really going on here?
All declarations (var, let, const, function, function*, class) are "hoisted" in JavaScript. This means that if a name is declared in a scope, in that scope the identifier will always reference that particular variable:
x = "global";
// function scope:
(function() {
x; // not "global"
var/let/… x;
}());
// block scope (not for `var`s):
{
x; // not "global"
let/const/… x;
}
This is true both for function and block scopes1.
The difference between var/function/function* declarations and let/const/class declarations is the initialisation.
The former are initialised with undefined or the (generator) function right when the binding is created at the top of the scope. The lexically declared variables however stay uninitialised. This means that a ReferenceError exception is thrown when you try to access it. It will only get initialised when the let/const/class statement is evaluated, everything before (above) that is called the temporal dead zone.
x = y = "global";
(function() {
x; // undefined
y; // Reference error: y is not defined
var x = "local";
let y = "local";
}());
Notice that a let y; statement initialises the variable with undefined like let y = undefined; would have.
The temporal dead zone is not a syntactic location, but rather the time between the variable (scope) creation and the initialisation. It's not an error to reference the variable in code above the declaration as long as that code is not executed (e.g. a function body or simply dead code), and it will throw an exception if you access the variable before the initialisation even if the accessing code is below the declaration (e.g. in a hoisted function declaration that is called too early).
Is there any difference between let and const in this matter?
No, they work the same as far as hoisting is regarded. The only difference between them is that a constant must be and can only be assigned in the initialiser part of the declaration (const one = 1;, both const one; and later reassignments like one = 2 are invalid).
1: var declarations are still working only on the function level, of course
Quoting ECMAScript 6 (ECMAScript 2015) specification's, let and const declarations section,
The variables are created when their containing Lexical Environment is instantiated but may not be accessed in any way until the variable’s LexicalBinding is evaluated.
So, to answer your question, yes, let and const hoist but you cannot access them before the actual declaration is evaluated at runtime.
ES6 introduces Let variables which comes up with block level scoping. Until ES5 we did not have block level scoping, so the variables which are declared inside a block are always hoisted to function level scoping.
Basically Scope refers to where in your program your variables are visible, which determines where you are allowed to use variables you have declared. In ES5 we have global scope,function scope and try/catch scope, with ES6 we also get the block level scoping by using Let.
When you define a variable with var keyword, it's known the entire function from the moment it's defined.
When you define a variable with let statement it's only known in the block it's defined.
function doSomething(arr){
//i is known here but undefined
//j is not known here
console.log(i);
console.log(j);
for(var i=0; i<arr.length; i++){
//i is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
for(let j=0; j<arr.length; j++){
//j is known here
}
//i is known here
//j is not known here
console.log(i);
console.log(j);
}
doSomething(["Thalaivar", "Vinoth", "Kabali", "Dinesh"]);
If you run the code, you could see the variable j is only known in the loop and not before and after. Yet, our variable i is known in the entire function from the moment it is defined onward.
There is another great advantage using let as it creates a new lexical environment and also binds fresh value rather than keeping an old reference.
for(var i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
for(let i=1; i<6; i++){
setTimeout(function(){
console.log(i);
},1000)
}
The first for loop always print the last value, with let it creates a new scope and bind fresh values printing us 1, 2, 3, 4, 5.
Coming to constants, it work basically like let, the only difference is their value can't be changed. In constants mutation is allowed but reassignment is not allowed.
const foo = {};
foo.bar = 42;
console.log(foo.bar); //works
const name = []
name.push("Vinoth");
console.log(name); //works
const age = 100;
age = 20; //Throws Uncaught TypeError: Assignment to constant variable.
console.log(age);
If a constant refers to an object, it will always refer to the object but the object itself can be changed (if it is mutable). If you like to have an immutable object, you could use Object.freeze([])
As per ECMAScript® 2021
Let and Const Declarations
let and const declarations define variables that are scoped to the running execution context's LexicalEnvironment.
The variables are created when their containing Environment Record is instantiated but may not be accessed in any way until the variable's LexicalBinding is evaluated.
A variable defined by a LexicalBinding with an Initializer is assigned the value of its Initializer's AssignmentExpression when the LexicalBinding is evaluated, not when the variable is created.
If a LexicalBinding in a let declaration does not have an Initializer the variable is assigned the value undefined when the LexicalBinding is evaluated.
Block Declaration Instantiation
When a Block or CaseBlock is evaluated a new declarative Environment Record is created and bindings for each block scoped variable, constant, function, or class declared in the block are instantiated in the Environment Record.
No matter how control leaves the Block the LexicalEnvironment is always restored to its former state.
Top Level Lexically Declared Names
At the top level of a function, or script, function declarations are treated like var declarations rather than like lexical declarations.
Conclusion
let and const are hoisted but not initialized.
Referencing the variable in the block before the variable declaration results in a ReferenceError, because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
Examples below make it clear as to how "let" variables behave in a lexical scope/nested-lexical scope.
Example 1
var a;
console.log(a); //undefined
console.log(b); //undefined
var b;
let x;
console.log(x); //undefined
console.log(y); // Uncaught ReferenceError: y is not defined
let y;
The variable 'y' gives a referenceError, that doesn't mean it's not hoisted. The variable is created when the containing environment is instantiated. But it may not be accessed bcz of it being in an inaccessible "temporal dead zone".
Example 2
let mylet = 'my value';
(function() {
//let mylet;
console.log(mylet); // "my value"
mylet = 'local value';
})();
Example 3
let mylet = 'my value';
(function() {
let mylet;
console.log(mylet); // undefined
mylet = 'local value';
})();
In Example 3, the freshly declared "mylet" variable inside the function does not have an Initializer before the log statement, hence the value "undefined".
Source
ECMA
MDN
From MDN web docs:
In ECMAScript 2015, let and const are hoisted but not initialized. Referencing the variable in the block before the variable declaration results in a ReferenceError because the variable is in a "temporal dead zone" from the start of the block until the declaration is processed.
console.log(x); // ReferenceError
let x = 3;
in es6 when we use let or const we have to declare the variable before using them.
eg. 1 -
// this will work
u = 10;
var u;
// this will give an error
k = 10;
let k; // ReferenceError: Cannot access 'k' before initialization.
eg. 2-
// this code works as variable j is declared before it is used.
function doSmth() {
j = 9;
}
let j;
doSmth();
console.log(j); // 9
let and const are also hoisted.
But an exception will be thrown if a variable declared with let or const is read before it is initialised due to below reasons.
Unlike var, they are not initialised with a default value while hoisting.
They cannot be read/written until they have been fully initialised.