Related
I've been trying to install react using npx create-react-app ./
That didn''t work so I tried npm init react-app my-app and it still didn't work.
The error im getting says
Error: EPERM: operation not permitted, mkdir 'C:\Users\Yanki' command not found: create-react-app
PS C: \Users\Yanki XXIV\Desktop\E-commerce-practice>
I think you will need to have version of Node>=10.16 and version of NPM >=5.6
If this is still not resolved then try this:
Clean cache with
npm cache clean --force
Install the latest version of NPM globally as admin:
npm install -g npm#latest --force
3.clean cache with
npm cache clean --force
I've never seen the ./ inclusion when creating a react app, but that's not to say it's wrong... maybe just follow the docs here and use:
npx create-react-app my-app
I found this answer it helped me so I hope this helps. Below is the link
https://stackoverflow.com/a/65516052/8195649
Go to c:/users open command prompt and run dir /x check shorter name you found with dir/x as shown in image and run npm config set cache "C:/Users/<shortname-you-found-with-dir/x>/AppData/Roaming/npm-cache" --global
When trying to install the npm packages using npm i command, I am getting the following exception:
I have tried reinstalling the Node.js package and setting the proxy to off using:
set HTTP_PROXY=
set HTTPS_PROXY=
The issue is still there. What I am doing wrong?
Update:
When I run the following command:
npm install --legacy-peer-deps
The following error is displayed:
This is not related to an HTTP proxy.
You have dependency conflict (incorrect and potentially broken dependency) as it says, so try to run the command with --force, or --legacy-peer-deps. If it doesn't take effect, the temporary solution is using prior versions of the Node.js (downgrading the Node.js version) as it causes this kind of errors to happen sometimes.
Update based on the OP's update:
As you see, it fires the following error:
No matching version found for #angular/http#^9.1.4.
Take a look at angular/http page. Note that the latest version for that deprecated package is 7.2.16 while you request an upper version (e.g., ^9.1.4)! So, try to check the project dependencies and follow the raised errors in order to solve the problem.
Try this command-
npm install --save --legacy-peer-deps
First to understand the problem. Here is what I have as error:
npm ERR! ERESOLVE unable to resolve dependency tree
npm ERR!
npm ERR! While resolving: project-admin#11.0.0
npm ERR! Found: #angular/common#11.0.3
npm ERR! node_modules/#angular/common
npm ERR! #angular/common#"11.0.3" from the root project
npm ERR!
npm ERR! Could not resolve dependency:
npm ERR! peer #angular/common#"^9.1.0 || ^10.0.0" from #agm/core#3.0.0-beta.0
npm ERR! node_modules/#agm/core
npm ERR! #agm/core#"3.0.0-beta.0" from the root project
First you should start to read the problem from the bottom to the top. Here #agm/core#3.0.0-beta.0 requires angular common 9.1.0 or 10.0.0. And the top message says that the angular common found is actually 11.0.3.
(If you want to understand dependencies little bit better, here is very simple site: How npm3 Works)
dependencies — these are the essential dependencies that you rely on and call in your project’s code
devDependencies — these are your development dependencies, for example, a prettier library for formatting code
peerDependencies — if you set a peer dependency in your package.json, you are telling the person who installs your package that they need that dependency with the specified version
optionalDependencies — these dependencies are optional and failing to install them will not break the installation process
bundledDependencies — it’s an array of packages that will come bundled with your package. This is useful when some 3rd party library is not on NPM, or you want to include some of your projects as modules
So what should be the solution then? The problem is about peer dependencies. The solution is to downgrade angular common or the solution is to use legacy dependencies logic for installing packages using --legacy-peer-deps. So --legacy-peer-deps does not try to install the peerDependencies automatically. Is this going to work for you? Probably, yes. But you should add specific instructions how to do that, or to make the use of --legacy-peer-deps automatic for future installation of the project packages with this code from one of the previous answers:
npm config set legacy-peer-deps true
In my case I installed the package and I tried to run ng serve, but because --legacy-peer-deps was used, there were dependency packages which were not installed. I had to install those manually (because I did not set the configuration from the code above). At the end installing about five packages manually, all with --legacy-peer-deps, I ended to a package that could not be installed and I did not try to continue, because my project was throwing warnings like crazy and there were a lot of packages for audit too. So my decision was not to use this package and to find an alternative.
Other solutions that I read about along the way:
downgrade Node.js to v14. This will downgrade npm. It might not be v14, but this was the version that was most widely downgraded to.
Some people use Yarn to force package installation - personally I don't understand how this works, because I haven't used Yarn.
downgrading Angular and the global Angular CLI version to version that will satisfy the requirement. In my case it is angular/common, and in the question it's angular/core, but both require downgrading the whole angular right (I am not sure about this here).
the package you install might have a higher version that doesn't require downgrading Angular. You might try to use the https://updatepackagejson.com/ to upgrade your packages to the latest, but this is in case your project is quite new.
In addition to using the --legacy-peer-deps command line option, this can also be set more permanently as a config option:
npm config set legacy-peer-deps true
Finally, I found the answer. Try this command -
npm install --save --legacy-peer-deps
Described here legacy-peer-deps
When using npm 7, this comes up a lot because peer dependencies issues are treated as errors in version 7 whereas they were generally only warnings in version 6. Usually using --legacy-peer-deps makes it work with npm 7.
When that doesn't work, an option is to downgrade to npm 6. Downgrading Node.js is not necessary (but not harmful either). The relevant dependency management code is in npm. Downgrading Node.js will often work coincidentally because doing so will often downgrade npm as well.
Another option that is less disruptive than downgrading npm is using npx to use the previous version of npm for just the install command: npx -p npm#6 npm install
And when all else fails, it's often worth a shot to remove the node_modules directory and package-lock.json, and then run npm install again. That regenerates node_modules and package-lock.json.
This happens for some packages after updating to npm 7.
Parameter --legacy-peer-deps can help:
npm i --legacy-peer-deps
Described here legacy-peer-deps
Causes npm to completely ignore peerDependencies when building a
package tree, as in npm versions 3 through 6.
If a package cannot be installed because of overly strict
peerDependencies that collide, it provides a way to move forward
resolving the situation.
...
You can set this option to true by default (not recommended by npm):
npm config set legacy-peer-deps true
Or just wait until these packages get up to date.
Just do two simple steps:
First, execute this in your terminal.
npm config set legacy-peer-deps true
Second, clear the cache:
npm cache clean --force
And finally, execute your command. This will work for sure.
The problem is related to a dependency conflict or broken dependency. You can proceed by accepting the incorrection of dependency by forcing an install.
Solution: Using command with --force.
Your command will be like npm install --force #your-npm-package.
Note: You can use yarn to install a dependency if it's available in to install with the yarn package manager.
NPM can be used to install and manage versions of dependencies in your projects.
I had it the same issue on React versions in relation with the npm version:
npm error found types/react#16.14.20
So it might be package-versions that need to be installed based on your package.json file.
It gives errors in the npm 7 version and cannot install Node.js modules.
If you will downgrade npm version to 6, those problems will become warnings and the problem will be resolved.
Try to prove this command: npm install -g npm#6
Check if version is already installed: npm --version
Remove and install node_modules package:
a) Remove rm -rf node_modules
b) Install: npm i
Try removing the node modules and package-lock.json file and run command npm install
or
Try npm cache clean --force
First I tried
npm install
It gave me error unable to resolve dependency tree and based on the help information from this command,
Fix the upstream dependency conflict, or retry
npm ERR! this command with --force, or --legacy-peer-deps
npm ERR! to accept an incorrect (and potentially broken) dependency resolution.
I tried this command:
npm install --legacy-peer-deps
And it solved my problem.
Try two options to resolve this issue:
Option 1: Delete folder node_modules folder and file package_lock.json after running:
npm cache clean --force after npm i --force
Option 2: run npm install --save --legacy-peer-deps
The fastest solution: npm install --legacy-peer-deps
Explanation:
In npm versions 3 through 6, peerDependencies were not automatically installed, and would raise a warning if an invalid version of the peer dependency was found in the tree. As of npm v7, peerDependencies are installed by default.
npm docs: peerDependencies
Your dependency contains some peerDependencies that conflict with the root project's dependency.
As it described in the npm ERR log.
Disclaimer: This assumes you're on npm v7
Note: If you follow the instructions of sibling commenters, it will create a user-scoped config that won't sync consistently across teammates / machines / buildbots.
Project-based legacy peer dependencies
You will probably want legacy-peer-deps tied to your project so it proliferates across machines / developers, and doesn't contaminate your other projects.
npm config set legacy-peer-deps true --location project
This will create a local file at .npmrc which you can commit to your repository:
legacy-peer-deps=true
Then afterwards, you can just run:
npm install
Then commit the updated lockfile.
Remember, location, location, location:
per-project configuration (/path/to/my/project/.npmrc, see more):
npm config set legacy-peer-deps true --location project
per-user configuration (defaults to $HOME/.npmrc, see more)
npm config set legacy-peer-deps true --location user
or, as the default location is user anyway:
npm config set legacy-peer-deps true
global configuration (defalts to $PREFIX/etc/npmrc, see more)
npm config set legacy-peer-deps true --location global
or, as --global infers --location global
npm config set legacy-peer-deps true --global
For some projects, fixing dependencies may be non-trivial
In my case, a critical dependency we have a legacy version of wants to pull in webpack v3 (!) - but that's a build dependency of that project's.
The best solution on a short term basis is to use legacy-peer-deps as a hold over.
If you are in a pinch, you could also consider forking the dependency and adjusting its peer dependencies accordingly - them point your project to the fork.
You can install the packages using two ways it is showing this error
ERESOLVE unable to resolve dependency tree
Install the package using npm install and having --legacy-peer-deps
npm install --save --legacy-peer-deps
This is a combination of two commands
a. Set legacy-peer-deps true in npm config
npm config set legacy-peer-deps true
b. Now install packages using npm install
npm install
The problem seems to be that gf-kautomata-pipeline-ui is using Angular 9, while #angular/http requires Angular 7. (#angular/http was deprecated and eventually removed, and all its functionality was moved into #angular/common instead.)
See: https://www.npmjs.com/package/#angular/http
If you're running Angular 9, then
delete #angular/http from your package.json (You don't need it in Angular 9)
Make sure you have #angular/common in your package.json.
Run npm i.
If you're running Angular 7, then open up your package.json and check to make sure all of your Angular packages are no higher than ^7.0.0. You may also need remove gf-kautomata-pipeline-ui, or contact the author of gf-kautomata-pipeline-ui and find out if the library is compatible with Angular 7.
This works for me:
npm install --save --legacy-peer-deps
In my case, I started getting the error (below) after upgrading npm from version 6 to 7.
npm ERR! code ERESOLVE npm ERR! ERESOLVE unable to resolve dependency
tree
...
npm ERR! Fix the upstream dependency conflict, or retry this command with --force, or --legacy-peer-deps to accept an incorrect (and potentially broken) dependency resolution.
In my case compiling with either --legacy-peer-deps or --force flags resulted in a useless bundle.
So I tried deleting the node_modules, package-lock.json, and bundle using yarn install. This generated a yarn.lock file and created package-lock.json that worked fine in subsequent npm runs.
P.S.: I am using the temporary workaround until npm 7 works fine with my project: after that, I will delete yarn.lock, package-lock.json and folder node_modules, and recompile with npm
rm -rf node_modules
rm package-lock.json
yarn install
# Generates a yarn.lock file and a new package-lock.json
# Continue with npm
npm start
I just update my Node.js and it works for me:
node -v
Output:
V xxxx
And:
sudo npm install -g n
(Use this command to install the stable node release.)
sudo n stable
If you have node_modules folder and package-lock.json file in your root directory then remove those:
rm -r node_modules
rm package-lock.json
Then run commands:
npm install --save --legacy-peer-deps
npm audit fix --force
Create .env file in the root directory and paste below code:
SKIP_PREFLIGHT_CHECK=true
Now, start your project:
npm start
I have faced this issue many times. At last I found a solution:
npm install react-native-paper --legacy-peer-deps
Use
npm install --legacy-peer-deps
This worked for me.
For this case, I was having the issue
ERESOLVE unable to resolve dependency tree
in an Angular 13 project that used some packages from a private npm feed in Azure DevOps.
To access this repository, I created an .npmrc file. Because of this, the npm install command would search all packages in my private repository and not in npm feed any more. The unable to resolve the dependency tree error happened because the npm install command could not find many of the packages that were hosted in the npm feed and not my private feed.
I found this amazing answer on how to scope packages.
Based on this, I made some changes:
In my library Package.json, update the name to have a scope name #mylib
"name": "#myLib/command-queue",
Build and publish this package to my private feed
In my client app (the one that uses this package), update the .npmrc file to use my private feed for packages in this scope only
#myLib:registry=https://pkgs.dev.azure.com/...
always-auth=true
Now, whenever I run the command npm install, if the package has the scope #myLib, it will look for it in my private feed, and use the npm feed for all other cases (i.e., #angular/...)
This is an example of my client app Package.json file:
"#angular/platform-browser-dynamic": "~13.3.0",
"#angular/router": "~13.3.0", <-- this comes from npm
"#myLib/jcg-command-queue": "^2.2.0", <-- This comes from my private feed
Also, with this change, there isn't any need to add --legacy-peer-deps to the npm install command any more.
We had the same issue resulting in the error bellow:
npm ERR! code ERESOLVE npm
ERR! ERESOLVE could not resolve npm
ERR!
npm ERR! While resolving: #angular/material-moment-adapter#12.1.4 npm
ERR! Found: #angular/material#12.0.6 npm ERR!
node_modules/#angular/material npm ERR! #angular/material#"~12.0.4"
from the root project
...
We use npm ci for clean install in Azure-Pipelines.
The issue was very often, that package.json and package-lock.json were not in sync anymore.
Solution to it was to execute npm install local and push the new package-lock.json.
As and additional hint we added a new task in the pipeline for additional informations if the the job fails.
- task: Npm#1
displayName: npm install
inputs:
command: custom
customCommand: ci
customRegistry: useNpmrc
# ##vso[task.logissue type=error] writes the text to the summary page (error-log).
- bash: echo "##vso[task.logissue type=error] If 'npm install' fails with 'ERESOLVE could not resolve', 'package.json' and 'package-lock.json' (needed for 'npm ci') may be out of sync. Run 'npm install' locally and push the new package-lock.json."
condition: failed() # Only execute on fail
displayName: npm install failed hint
Resetting package-lock.json works good for me all the time:
git checkout -- package-lock.json
Details:
Been experiencing this a lot when updating all packages of the legacy project - I highly don't recommend using npm audit fix nor npm i --force. Deleting the package-lock.json didn't work for me all the time as well. Rollback to the working version of package.json + package-lock.json and add packages turned out to be the safest and fastest variant for me.
Just in case, I did have similar behavior, when I tried either npm upgrade my current Angular 11.x based boilerplate from previous ng new or create new ng new abc based on Angular 12.x. I simply forgot to upgrade Angular CLI. So this npm install -g #angular/cli#latest solved my errors during ng new abc.
In my case I was having trouble with a #babel/core dependency, but I didn't want to use --force, because I was not sure about the consequences, so I went to https://www.npmjs.com/, looked for the package and replaced my old version with the newest one. That did the work.
This is an issue of Node.js version. Some latest versions of Node.js could show errors like these.
https://github.com/nvm-sh/nvm
I use NVM to manage Node.js versions on the system and use Node.js 12 to get past this error.
Command to change version:
nvm use 12
Downgrade Node.js to v14 works for me.
Use these commands:
source ~/.bash_profile
nvm use v14.16.1
npm install
I'm trying to run npm install, this is output from console:
npm ERR! Linux 4.8.0-27-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v6.9.1
npm ERR! npm v3.10.8
npm ERR! Maximum call stack size exceeded
npm ERR!
npm ERR! If you need help, you may report this error at:
npm ERR! <https://github.com/npm/npm/issues>
and this is content of npm-debug.log:
113791 verbose stack RangeError: Maximum call stack size exceeded
113791 verbose stack at Object.color (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/console-control-strings/index.js:115:32)
113791 verbose stack at EventEmitter.log._format (/usr/lib/node_modules/npm/node_modules/npmlog/log.js:252:51)
113791 verbose stack at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/log.js:138:24)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113791 verbose stack at .<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/are-we-there-yet/tracker-group.js:23:18)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113791 verbose stack at .<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/are-we-there-yet/tracker-group.js:23:18)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113792 verbose cwd /home/giorgi/AdMove/dev/web-advertiser-admove
113793 error Linux 4.8.0-27-generic
113794 error argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
113795 error node v6.9.1
113796 error npm v3.10.8
113797 error Maximum call stack size exceeded
113798 error If you need help, you may report this error at:
113798 error <https://github.com/npm/npm/issues>
113799 verbose exit [ 1, true ]
Removed node_modules several times and tried to reinstall. Can't understand what's the reason that causes this and how to fix it.
metzelder's answer helped me fix the issue. however if you run the command npm cache clean, it will give you a message
As of npm#5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid
So, as of npm5 you can do by adding a --force flag to the command.
So the command is:
npm cache clean --force
npm rebuild
it has solved my problem
Try removing package-lock.json and the node_modules folder:
rm package-lock.json
rm -r node_modules
I had the same issue with npm install.
After a lot of search, I found out that removing your .npmrc file or its content (found at %USERPROFILE%/.npmrc), will solve this issue. This worked for me.
npm uninstall
npm cache clean --force
I tried these two methods but they didn't work. After, I deleted the node_modules directory and ran npm install again, it still didn't work. Lastly, I deleted package-lock.json and created a new package-lock.json file using
npm install
I have overcome this issue by doing following:
Delete all the content of the npm dependencies. You can find the default install location according to this thread:
https://stackoverflow.com/a/5926706/1850297
Before you run npm install command, I suggest to run npm cache clean --force
npm rebuild will work for sure
In my case, update to the newest version:
npm install -g npm
I deleted
node_modules
and then reinstalled by
npm install
It worked for me
I have also faced the same problem and this is how i resolved it.
First of all you need to make sure that your node and npm versions are up to date. if not please upgrade your node and npm packages to latest versions.
nvm install 12.18.3 // update node version through node version manager
npm install npm // update your npm version to latest
Delete your node_modules folder and package-lock.json file.
Force clean the entire NPM cache by using following comand.
npm cache clean --force
Re-Install all the dependencies.
npm install
If above step didn't resolve your problem, try to re-install your dependencies after executing following command.
npm rebuild
This issue can also happen if you're trying to install a package that doesn't exist or if you're trying to install a version that doesn't exist.
npm cache clean returns below message
As of npm#5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use 'npm cache verify' instead. On the other hand, if you're debugging an issue with the installer, you can use npm install --cache /tmp/empty-cache to use a temporary cache instead of nuking the actual one.
If you run npm cache verify, as specified above, then it actually runs cache verification and garbage collection which fixes the problem.
Cache verified and compressed (~\AppData\Roaming\npm-cache_cacache):
Content verified: 6183 (447214684 bytes) Content garbage-collected: 16
(653745 bytes) Index entries: 9633
Happened in docker (node:15-buster) for me.
Remember to use WORKDIR /<folder> so that it doesn't conflict with original npm libraries installed.
The folder can be anything but system folders, so that includes using /.
In case none of these answer work for you, it may be because the terminal you're using isn't the right one/ your node_modules is used by another part of your computer.
In my case I kept juggling between this error (maximum call stack size exceeded) and the access error event when I did a sudo npm i.
The fix was to close my IDE (which was WebStorm), run npm i in a basic terminal, and that was it.
I'm not a Windows user, so if you are, try to check Rene Knop comment.
For Unix/OSX users, I've removed the root .npmrc file ~/.npmrc.
Before you're going to try it, please,
check if there is nothing necessary over there
you can use this command to bring all content into your terminal: cat ~/.npmrc .
If you have got something like:
cat: /Users/$USER/.npmrc: No such file or directory
to save a copy:
cp ~/.npmrc ~/.npmrc_copy
Now, try to remove it (Works for bash users: Unix / Ubuntu / OSX ...):
rm -f ~/.npmrc
This worked for me.
Hope this will be helpful for others.
I also had the same problem. I had tried the previous solutions, but the solution for me was much simpler. I only had to remove the space in the directory and then run npm i again
Thanks to: https://github.com/nodejs/node-gyp/issues/809#issuecomment-155019383 for pointing this out.
In my case I had a custom .npmrc file that included an auth token for authenticating with a private npm registry.
The token had expired, which helpfully returned code E401: Incorrect or missing password locally, but ERR! Maximum call stack size exceeded from the CI build.
You uninstall npm package and force clean the cache and close terminal and reinstall whichever package be.
$sudo npm uninstall <package - name>
$sudo npm cache clean --force
Then restart terminal and check
Still not working upgrade both npm and node to the latest version
Today we encountered this error when running an npm prune even after running an npm cache clean --force.
Versions:
node 13.8.0
npm 6.13.6
Deleting the package-lock.json worked for this case as well. Thank you all!
In general, once a module has been installed, it's much more convenient to use npm ci instead of npm install. Please check out this SO answer for the advantages of the former with respect to the later in a production environment.
So please just run
npm ci
All dependencies will be updated, and the problem will disappear. Or it will error in the case there's some grave de-synchronization between one and the other.
Most of the times, this issue occurs if you are using the system provided by the organization you work for and it's vpn restricts the use of this command.
In this case, you may try to disconnect from organization vpn and then execute this command.
I tried everything to fix this issue on my Mac. I think the issue started when I had already downloaded npm from Node.js and then reinstalled it with Homebrew while following along with a Team Treehouse video.
Here's what I tried:
From https://docs.npmjs.com/misc/removing-npm
sudo npm uninstall npm -g
sudo make uninstall
sudo rm -rf /usr/local/{lib/node{,/.npm,_modules},bin,share/man}/npm*
From How do I completely uninstall Node.js, and reinstall from beginning (Mac OS X)
sudo rm -rf /usr/local/{lib/node{,/.npm,_modules},bin,share/man}/{npm*,node*,man1/node*}
Here's what worked:
In the end, the only thing that worked for me was to clone down the npm-reinstall repo from GitHub that completely removed everything related to npm on my Mac.
https://github.com/brock/node-reinstall
I then had to reinstall node and npm from Node.js.
I tried everything to fix this issue on my windows 7 machine like
Reinstalling and rebuilding npm
At last, I fixed this small configuration setting issue by wasting my entire day.
How I resolved this issue
Removing my project specific configurations in global .npmrc
at location like drive:/Windows/Users/../.npmrc
I solved it 100% I had this problem with gulp version: 3.5.6.
You should clean the package-lock.js and then run npm install and It worked form
Our company dev environment uses Artifactory as the default registry for our NPM dependencies, and when running npm install it was defaulting to this, which did not work... so manually specifying the main npm registry via npm install --registry https://registry.npmjs.org fixed this issue for me...
I was facing the same error, I was trying to install jest into to one of the packages in a monorepo project.
If you are using Yarn + Learna to package a monorepo project, you will have to navigate to the package.json inside the target package and then run npm install or npm install <package name>.
I don't know why, but I ran npm install with sudo and it worked.
sudo npm install
I had this problem and it was due to an upgrade of my git executable. I rolled back to Git-2.21.0.rc1.windows.1-64-bit and added this to my environment path and it fixed my issue.
The one thing that finally worked for me on Mac was upgrading from node 8.12 to 10.x using NVM.
I uninstalled all other versions of Node with NVM, then installed 10.x, then ran nvm alias default node, which tells NVM to always default to the latest available node version on a shell.
After that, my live reloading issue went away!
Switching to yarn solved the issue for me.
I'm having an issue with the create-react-app command. I've followed the instructions twice, tried other solutions such as adding
"resolutions": {
"ajv": "6.8.1"
}
to the package.json file then uninstalling and reinstalling ajv#6.8.1. I've tried using yarn but ended up just starting it all over to use npm, just to get the same error. Most answers I am finding are a year or more old. any help is Appreciated!
Here is the error message..
npm start
scilenceapp#0.1.0 start C:\Users\chris\OneDrive\Documents\coding stuff\SciLence\ScilenceApp\scilenceapp
react-scripts start
There might be a problem with the project dependency tree.
It is likely not a bug in Create React App, but something you need to fix locally.
The react-scripts package provided by Create React App requires a dependency:
"webpack": "4.42.0"
Don't try to install it manually: your package manager does it automatically.
However, a different version of webpack was detected higher up in the tree:
C:\Users\chris\node_modules\webpack (version: 4.41.2)
Manually installing incompatible versions is known to cause hard-to-debug issues.
If you would prefer to ignore this check, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That will permanently disable this message but you might encounter other issues.
To fix the dependency tree, try following the steps below in the exact order:
Delete package-lock.json (not package.json!) and/or yarn.lock in your project folder.
Delete node_modules in your project folder.
Remove "webpack" from dependencies and/or devDependencies in the package.json file in your project folder.
Run npm install or yarn, depending on the package manager you use.
In most cases, this should be enough to fix the problem.
If this has not helped, there are a few other things you can try:
If you used npm, install yarn (http://yarnpkg.com/) and repeat the above steps with it instead.
This may help because npm has known issues with package hoisting which may get resolved in future versions.
Check if C:\Users\chris\node_modules\webpack is outside your project directory.
For example, you might have accidentally installed something in your home folder.
Try running npm ls webpack in your project folder.
This will tell you which other package (apart from the expected react-scripts) installed webpack.
If nothing else helps, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That would permanently disable this preflight check in case you want to proceed anyway.
P.S. We know this message is long but please read the steps above :-) We hope you find them helpful!
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! scilenceapp#0.1.0 start: react-scripts start
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the scilenceapp#0.1.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\chris\AppData\Roaming\npm-cache_logs\2020-07-27T21_42_25_489Z-debug.log
PS C:\Users\chris\OneDrive\Documents\coding stuff\SciLence\ScilenceApp\scilenceapp>
“C:\Users\chris\node_modules\webpack (version: 4.41.2)”
You may have to remove that file from your c drive. And run npm i again. I had the same issue with jest.
try also npm cache clean --force
I'm encountering the below error stack trace, while I try to install "jQuery" using Bower. Can someone offer some help?
C:\study\meanApp>bower install jquery --save
bower not-cached git://github.com/jquery/jquery.git#*
bower resolve git://github.com/jquery/jquery.git#*
bower download https://github.com/jquery/jquery/archive/2.1.1.tar.gz
bower retry Download of https://github.com/jquery/jquery/archive/2.1.1.t
ar.gz failed, trying with git..
bower EPERM EPERM, unlink 'C:\Users\UserZ\AppData\Local\Temp\AUserZ\bower\jquery-8680-AaJIqU\archive.tar.gz'
Stack trace:
Error: EPERM, unlink 'C:\Users\UserZ\AppData\Local\Temp\A-UserZ\bower\jqu
ery-8680-AaJIqU\archive.tar.gz'
Console trace:
Trace
at StandardRenderer.error (C:\Users\UserZ\AppData\Roaming\npm\node_module
s\bower\lib\renderers\StandardRenderer.js:72:17)
at Logger.<anonymous> (C:\Users\UserZ\AppData\Roaming\npm\node_modules\bo
wer\bin\bower:110:22)
at Logger.EventEmitter.emit (events.js:95:17)
at Logger.emit (C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\nod
e_modules\bower-logger\lib\Logger.js:29:39)
at C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\lib\commands\ind
ex.js:40:20
at _rejected (C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\node_
modules\q\q.js:797:24)
at C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\node_modules\q\q
.js:823:30
at Promise.when (C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\no
de_modules\q\q.js:1035:31)
at Promise.promise.promiseDispatch (C:\Users\UserZ\AppData\Roaming\npm\no
de_modules\bower\node_modules\q\q.js:741:41)
at C:\Users\UserZ\AppData\Roaming\npm\node_modules\bower\node_modules\q\q
.js:557:44
System info:
Bower version: 1.3.9
Node version: 0.10.18
OS: Windows_NT 6.1.7601 ia32
P.S: I've gone through the StackOverflow could find nothing related to my error, hence posting this question.
Thanks in advance,
Dave
Cleaning the cache resolved the error for me: npm cache clean
I got the same error "EPERM, unlink" but with a different archive.
Running these commands resolved the issue for me:
npm uninstall -g bower
npm update decompress-zip
npm install -g bower
This link is where I saw to use those commands: https://github.com/bower/bower/issues/798
It is the updating of the decompress-zip that has resolved the issue for others as well.
I got this error and ran the bower in verbose mode. And found the error as below:
bower error SELF_SIGNED_CERT_IN_CHAIN
To resolve this, add below line into .bowerrc created in your default home directory.
"strict-ssl": false
Try bower install again, it should work.
You could try the following sequence. It worked for me.
bower cache clean
npm uninstall -g bower
npm install -g bower
bower install jQuery#2.1.1
I had a similar problem and i resolved it pretty easily; I was trying to bower install while running a server from my machine. I disconnected the server and IDE (webstorm) and it worked.
i also got the same problem and i tried again all uninstalled everything then after i install again gitbash
command in gitbash
$ npm install -g bower // let it execute
once executed
again command
$ bower install bootstrap // let it execute
when executed you got
if want more then run more commands :)
e.g.
$ bower install script.js
Whenever I encounter this error, what I do is to clean the npm's cache,
npm cache clean
and if it doesn't work, I uninstall the concerned bower component, and install it again.
Uninstall your old node (it may be < 0.12.0)
And Install node version > v0.12.0 (In my case v0.12.7)
Then
npm update npm -g
And
bower install
I resolved it by running
bower cache clean