We Keep Coding

Reading OData contexts in onInit of controller

I've tried to prepare data from an OData source to show it in a bar graph in my fiori app. For this, I setup the OData model in the manifest.json. A test with a list, simply using
items="{path : 'modelname>/dataset'}
works fine and shows the content.
To prepare data for a diagram (VizFrame), I used the onInit() function in the controller of the view (mvc:XMLView). The data preparation is similar to the one discussed in question.
At first I obtain the ODataModel:
var oODataModel = this.getOwnerComponent().getModel("modelname");
Next I do the binding:
var oBindings = oODataModel.bindList("/dataset");
Unfortunately, the oBindings().getContexts() array is always empty, and also oBindings.getLength() is zero. As a consequence, the VizFrame shows only "No Data".
May it be that the data model is not fully loaded during the onInit() function, or do I misunderstand the way to access data?
Thanks in advance
Update
I temporary solved the problem by using the automatically created bind from the view displaying the data as list. I grep the "dataReceived" event from the binding getView().byId("myList").getBindings("items") and do my calculation there. The model for the diagram (since it is used in a different view) is created in the Component.js, and registered in the Core sap.ui.getCore().setModel("graphModel").
I think this solution is dirty, because the graph data depends on the list data from a different view, which causes problems, e.g. when you use a growing list (because the data in the binding gets updated and a different range is selected from the odata model).
Any suggestions, how I can get the odata model entries without depending on a different list?

The following image outlines the lifecycle of your UI5 application.
Important are the steps which are highlighted with a red circle. Basically, in your onInit you don't have full access to your model via this.getView().getModel().
That's probably why you tried using this.getOwnerComponent().getModel(). This gives you access to the model, but it's not bound to the view yet so you don't get any contexts.
Similarly metadataLoaded() returns a Promise that is fullfilled a little too early: Right after the metadata has been loaded, which might be before any view binding has been done.
What I usually do is
use onBeforeRendering
This is the lifecycle hook that gets called right after onInit. The view and its models exist, but they are not yet shown to the user. Good possibility to do stuff with your model.
use onRouteMatched
This is not really a lifecycle hook but an event handler which can be bound to the router object of your app. Since you define the event handler in your onInit it will be called later (but not too late) and you can then do your desired stuff. This obviously works only if you've set up routing.

You'll have to wait until the models metadata has been loaded. Try this:
onInit: function() {
var oBindings;
var oODataModel = this.getComponent().getModel("modelname");
oODataModel.metadataLoaded().then(function() {
oBindings = oODataModel.bindList("/dataset");
}.bind(this));
},

May it be that the data model is not fully loaded during the onInit()
function, or do I misunderstand the way to access data?
You could test if your model is fully loaded by console log it before you do the list binding
console.log(oODataModel);
var oBindings = oODataModel.bindList("/dataset");
If your model contains no data, then that's the problem.

My basic misunderstanding was to force the use of the bindings. This seems to work only with UI elements, which organize the data handling. I switched to
oODataModel.read("/dataset", {success: function(oEvent) {
// do all my calculations on the oEvent.results array
// write result into graphModel
}
});
This whole calculation is in a function attached to the requestSent event of the graphModel, which is set as model for the VizFrame in the onBeforeRendering part of the view/controller.

Reactively call a js function/event with meteor.js

I'm new to meteor.js. Still getting used to it.
I get how templates update reactively according to the cursor updates on the server, like this:
{{#if waitingforsomething.length}} Something Happened! {{/if}}
This is good to display elements on the page, updating lists and content. Now, my question is: what if I want to call some javascript or fire some event when something gets updated reactively? What would be the right way to do it with meteor.js?

Anything inside Tracker.autorun or template instance this.autorun runs with changes in reactive data sources inside these autoruns.
Reactive data sources are ReactiveVar instances, db queries, Session variables, etc.
Template.myTemplate.onCreated(function() {
// Let's define some reactive data source
this.reactive = new ReactiveVar(0);
// And put it inside this.autorun
this.autorun(() => console.log(this.reactive.get()));
});
Template.myTemplate.events({
// Now whenever you click we assign new value
// to our reactive var and this fires
// our console.log
'click'(event, template) {
let inc = template.reactive.get() + 1;
template.reactive.set(inc);
}
});

It is a little bit outdated, but Sacha Greif's Reactivity Basics is a very quick and concise introduction to meteor's reactivity model.
Basically, you have what's called reactive computations, code that observes special data objects (sessions, subscriptions, cursors, etc.) and gets executed whenever any of these reactive sources changes.
This is exposed via the Tracker API

Computation works pretty well for me:
Template.myTemplate.onRendered(function() {
this.computation = Deps.autorun(function () {
if (something) {
$(".reactive").html("Something Happened!");
}
});
});
Template.myTemplate.destroyed = function(){
if (this.computation){
this.computation.stop()
}
};
I Hope this helps.

Meteor: Data from External API call not rendering

I am relatively new to Meteor, and I'm trying to create a web store for my sister-in-law that takes data from her existing Etsy store and puts a custom skin on it. I've defined all of my Meteor.methods to retrieve the data, and I've proofed the data with a series of console.log statements... So, the data is there, but it won't render on the screen. Here is an example of some of the code on the server side:
Meteor.methods({
...
'getShopSections': function() {
this.unblock();
var URL = baseURL + "/sections?api_key="+apiKey;
var response = Meteor.http.get(URL).data.results;
return response;
}
...
});
This method returns an array of Object. A sample bit of JSON string from one of the returned Objects from the array:
{
active_listing_count: 20,
rank: 2,
shop_section_id: 1******0,
title: "Example Title",
user_id: 2******7
}
After fetching this data without a hitch, I was ready to make the call from the client side, and I tried and failed in several different ways before a Google search landed me at this tutorial here: https://dzone.com/articles/integrating-external-apis-your
On the client side, I have a nav.js file with the following bit of code, adapted from the above tutorial:
Template.nav.rendered = function() {
Meteor.call('getShopSections', function(err, res) {
Session.set('sections', res);
return res;
});
};
Template.nav.helpers({
category: function() {
var sections = Session.get('sections');
return sections;
}
});
And a sample call from inside my nav.html template...
<ul>
{{#each category}}
<li>{{category.title}}</li>
{{/each}}
</ul>
So, there's a few things going on here that I'm unsure of. First and foremost, the DOM is not rendering any of the category.title String despite showing the appropriate number of li placeholders. Secondly, before I followed the above tutorial, I didn't define a Session variable. Considering that the list of shop categories should remain static once the template is loaded, I didn't think it was necessary from what I understand about Session variables... but for some reason this was the difference between the template displaying a single empty <li> tag versus a number of empty <li>'s equal to category.length --- so, even though I can't comprehend why the Session variable is needed in this instance, it did bring me one perceived step closer to my goal... I have tried a number of console.log statements on the client side, and I am 100% sure the data is defined and available, but when I check the source code in my Developer Tools window, the DOM just shows a number of empty li brackets.
Can any Meteor gurus explain why 1) the DOM is not rendering any of the titles, and 2) if the Session variable indeed necessary? Please let me know if more information is needed, and I'll be very happy to provide it. Thanks!

You set the data context when you use #each, so simply use:
<li>{{title}}</li>
If a Session is the right type of reactive variable to use here or not is hard to determine without knowing what you are doing but my rough guess is that a Mini Mongo collection may be better suited for what it appears you are doing.
To get you started on deciding the correct type of reactive variable to use for this head over to the full Meteor documentation and investigate: collections, sessions, and reactive vars.
Edit: To step back and clarify a bit, a Template helper is called a reactive computation. Reactive computations inside of helpers will only execute if they are used in their respective templates AND if you use a reactive variable inside of the computation. There are multiple types of reactive variable, each with their own attributes. Your code likely didn't work at all before you used Session because you were not using a reactive variable.

Updating Chrome storage object key value

I'm creating a Google Chrome extension and I'm saving information using the chrome.storage.sync.set function. According to the API you can create an object and save the information between accounts. While I am not having any trouble creating this object, I am having trouble updating a specific key and syncing the value, without making an entirely separate object for each change.
For example my object looks something like this when logged to the console:
{
profile: {
preferences: {
username: 'my username'
}
}
}
I'd like to simply update the value 'username'.
I've tried doing something like this (I have access to the object through the chrome.storage.sync.set function callback):
_ext.profile.preferences.username = 'my new username';
This does update the object, but does not save and store it.
I have also tried this method:
_ext.profile.preferences.username = 'my new username 2'; /* update the key value */
chrome.storage.sync.set(_ext.profile) /* save the entire object to memory */
This method has not worked either.
What do you think is the problem here? Is it the way in which I'm trying to save the object or is there a better method to having a settings based approach?

If you are calling "get" right away, before the "set" has completed, that could be the problem. Your example does not show a callback being passed to handle completion of the "set".

I stumbled across your post while looking to solve the same issue. I ended up using a similar approach as React Redux state management. Instead of trying to manipulate the stored data, I make a copy then replace it.
var data = {};
chrome.storage.sync.get(function(result){
data = result.storedData;
data.profile.preferences.username = 'my new username';
});
chrome.storage.sync.set({'storedData': data});

Where does data returned by ember-data 'live'?

ya'll I have a bit of a structural/procedural question for ya.
So I have a pretty simple ember app, trying to use ember-data and I'm just not sure if I'm 'doing it right'. So the user hits my index template, I grab their location coordinates and encode a hash of it (that part works). Then on my server I have a db that stores 'tiles' named after there hash'd coords (if i hit my #/tiles/H1A2S3H4E5D route I get back properly formatted JSON).
What I would like to happen next, if to display each of the returned tiles to the user on the bottom of the first page (like in a partial maybe? if handlebars does that).
I have a DS.Model for the tiles, if I hard code the Hash'd cords into a App.find(H1A2S3H4E5D); I can see my server properly responding to the query. However, I cannot seem to be able to figure out how to access the returned JSON object, or how to display it to the user.
I did watch a few tutorial videos but they all seem to be outdated with the old router.
Mainly I would like to know:
1. Where does the information returned by App.find(); live & how to access it?
2. what is the 'correct' way to structure my templates/views to handle this?
3. how should I pass that id (the hash'd coords) to App.find? as a global variable? or is there a better way?
the biggest problem(to me) seems to be that the id I search by doesn't exist until the user hit the page tho first time. (since its dynamically generated) so I can't just grab it when the page loads.
I can post a fiddle if required, but I'm looking for more of a conceptual/instructional answer rather then some one to just write my code for me

I'm still learning a lot with Ember as well, but this is my understanding. When you follow the guides and the tutorials out there, you'll have something like this:
App.TileController = Ember.ObjectController.extend();
App.TileRoute = Ember.Route.extend({
setupController: function(controller) {
controller.set('content', App.Tile.find(MYHASH));
}
});
What it does is set the special content object to the result. So since we're declaring an object controller, and calling find with a parameter, it knows that a single result is expected. So a view & template that follow the naming convention of Tile will be loaded. And in there you can access properties on the Tile object:
<p>{{lat}}</p><p>{{lng}}</p>
I have to admit that this feels a bit mystical at times. The core to it is all in the naming convention. You need to be pretty specific in how you name all your various controllers, routes, etc. Once that's nailed down, it's a matter of binding what data you want to the controller's content.
1) Aside from the generic answer of "in memory", the .find() calls live where ever you return it to. Generally speaking, this is meant to be set on a 'content' property of a controller.
2) I more or less answered this, but generally speaking you take the name of your route, and base it off that. So for a route TileRoute, you have:
TileController = Ember.ObjectController.extend
Tile = DS.Model.extend
TileView = Ember.View.extend
tile.handlebars
I generally store all my handlebars files in a templates/ folder. If you nest them deeper, just specify the path in your view object:
App.TileView = Ember.View.extend({
templateName: "tiles/show"
});
3) This really depends on your app. Generally speaking its better for the id to be either obtained from the URL, or constructed locally in a function. Since you are encoding a hash, i imagine you're doing this in a function, and then calling find. I do something a bit similar for an Array controller.
I don't know at what point you are generating a hash, so let's say it's onload. You should be able to generate the hash just in the setupController function.
App.TileRoute = Ember.Route.extend({
generateHashBasedOnCoords: function() {
// ...
},
setupController: function(controller) {
var MYHASH = this.generateHashBasedOnCoords();
controller.set('content', App.Tile.find(MYHASH));
}
});
I hope that helps.

I believe that you can make use of the data binding in ember and basically have an array controller for tiles and set the content initially to an empty array. Then we you get back your response do a App.find() and set the content of the tiles controller with the data that is returned. This should update the view through the data binding. (Very high level response)
The data itself is stored in a store that is setup with ember data. You access it with the same method you are using the model methods App.Tile.find() ect. It checks to see if the data that is needed is in the store if so it returns the data otherwise it makes a call to the api to get the data.