I want a counter which reset in specific interval of time. I wrote this code. When I refresh the page it is executing perfectly. But as time passes the timer goes really fast, skipping seconds. Any idea why this is happening.
function countdown_new() {
window.setInterval(function () {
var timeCounter = $("b[id=show-time]").html();
var updateTime = eval(timeCounter) - eval(1);
$("b[id=show-time]").html(updateTime);
if (updateTime == 0) {
//window.location = ("ajax_chart.php");
$("b[id=show-time]").html(5);
clearInterval(countdown_new());
// countdown_new();
//my_ajax();
}
}, 1000);
}
window.setInterval(function () {
countdown_new();
}, 5000)
HTML
Coundown in 5 seconds
The issue is because you are not clearing the previous timer before starting a new one, so you start a new one for each iteration. To clear the timer you should save a reference to it, and pass that to clearInterval, not a function reference.
Also, note that your pattern of using multiple intervals for different operations can lead to overlap (where two intervals are acting at the same time and cause odd behaviour). Instead, use setTimeout for the initial 5 second delay and then chain further calls to stop this overlap.
Try this:
var timer;
function countdown_new() {
timer = setInterval(function () {
var $showTime = $("#show-time")
var updateTime = parseInt($showTime.text(), 10) - 1;
$showTime.html(updateTime);
if (updateTime == 0) {
$showTime.html('5');
clearInterval(timer);
setTimeout(countdown_new, 5000);
}
}, 1000);
}
setTimeout(countdown_new, 5000);
Example fiddle
Note that you should use the # selector to select an element by its id attribute, and you should never use eval - especially not for type coercion. To convert a value to an integer use parseInt().
You are calling window.setInterval(), which schedules a function call to countdown_new() ever 5 seconds without stop.
Compounding the problem, you are calling countdown_new() again inside your clear interval.
You need to call setInterval just once to continuously execute a function every 5 seconds.
If you want to cancel an interval timer, you need do to this:
var intervalObj = setInterval(function() { ... }, 5000);
clearInterval(intervalObj);
Yes clearinterval does the trick.
function countdown_new(){
t = window.setInterval(function() {
var timeCounter = $("b[id=show-time]").html();
var updateTime = eval(timeCounter)- eval(1);
$("b[id=show-time]").html(updateTime);
if(updateTime == 0){
//window.location = ("ajax_chart.php");
$("b[id=show-time]").html(5);
clearInterval(t);
// countdown_new();
my_ajax();
}
}, 1000);
}
Related
My setTimeout() function works, but my clearTimeout() is not working. Even though I have an 'if' statement that's supposed to run the clearTimeout function once my variable 'secs' is less than 0, the timer keeps counting down into negative numbers. When I type my variable name, 'secs' into the console, I get undefined, even though it's defined as a parameter in the function called by my setTimeout. I don't know what I'm doing wrong. Can anyone help, please?
My full code is at https://codepen.io/Rburrage/pen/qBEjXmx;
Here's the JavaScript snippet:
function startTimer(secs, elem) {
t = $(elem);
t.innerHTML = "00:" + secs;
if(secs<0) {
clearTimeout(countDown);
}
secs--;
//recurring function
countDown = setTimeout('startTimer('+secs+',"'+elem+'")', 1000);
}
Add a condition to call recursive function like below.
if (secs < 0) {
secs = secsInput;
}
//recurring function
countDown = setTimeout('startTimer('+secs+',"'+elem+'")', 1000);
For a countdown timer, I would recommend using setInterval and clearInterval instead. setInterval will repeatedly run the callback function for you. It might look like this:
let countdown;
function startTimer(secs, elem) {
countdown = setInterval(function(){
t = $(elem);
t.innerHTML = "00:" + secs;
secs--
if (secs < 0) {
clearInterval(countdown);
}
}, 1000);
}
By the time you call clearTimeout(countDown), countDown refers to the previous timeout, that already timed out. It will not stop the one yet to start. You could just not re set the timeout, like
if(!/*finished*/) setTimeout(startTimer, 1000, secs, elem);
In your case, it's more convenient to use setInterval and clearInterval.
To keep the setTimeout and clearTimeout functions, you should add return in the if statement.
function startTimer(secs, elem) {
t = $(elem);
t.innerHTML = "00:" + secs;
if(secs<0) {
clearTimeout(countDown);
return;
}
secs--;
//recurring function
countDown = setTimeout('startTimer('+secs+',"'+elem+'")', 1000);
}
So there are 4 events in my opinion that will have to be addressed by the timer:
The quiz starts
The quiz ends
The timer runs out
The player answers a question
This can be solved by a function returning an object with some options.
The createTimer can be used to set the parameters for the timer.
Point 1. would be timer.start() --> will start a timer with the parameters
Point 3. can be addressed with the callback that will be called if the timer runs out --> createTimer(5,'display', ()=>{ // your code goes here })
Point 2. can be achieved with --> timer.stop()
Point 4. is needed when the timer needs to be reset without running out timer.reset()
Further on the interval is not in the global scope so you could have multiple timers with different settings and they wouldn't interfere with each other
// function for creating the timer
function createTimer(seconds, cssSelector, callbackOnTimeout) {
// interval the timer is running
let interval;
// the html node where innerText will be set
const display = document.getElementById(cssSelector)
// original seconds passt to createTimer needed for restart
const initSec = seconds
// starting or continuing the interval
function start() {
// setting interval to the active interval
interval = setInterval(() => {
display.innerText = `00:${seconds}`;
--seconds;
if (seconds < 0) {
// calling restart and callback to restart
callbackOnTimeout()
restart()
}
}, 1000);
}
// just stopping but not resetting so calling start will continue the timer
// player takes a break
function stop(){
clearInterval(interval)
}
// opted for a restart and not only a reset since it seemed more appropriate for your problem
function restart(){
clearInterval(interval)
seconds = initSec
start()
}
// returning the object with the functions
return {
start: start,
stop: stop,
restart: restart
}
}
// example for creating a timer
const timer1 = createTimer(5,'display',()=>{
console.log(`you where to slow ohhh...`)
})
// calling the timer
timer1.start()
I'm working on some code that'd I'd like to have each loop run every 60 seconds, but currently each loop runs immediately. The purpose of the code it to see if a form has changed, and if it has save the form. Do I have setInterval setup incorrectly?
function saveHelper(formId) {
for(var i = 0; i < 4; i++) {
save(formId);
}
}
function save(formId) {
console.log('might save');
var changed = formChanges(formId);
var intId = setInterval(stall, 60000);
if(changed.length > 0) {
console.log('would save');
//document.getElementById(formId).submit();
}
clearInterval(intId);
}
function stall() {
return true;
}
You are treating interval as some sort of synchronous sleep method, which is not the case. The change code should be inside of the setInterval, it should not live after the interval.
var intId = setInterval(function () {
if(changed.length > 0) {
console.log('would save');
//document.getElementById(formId).submit();
}
}, 60000);
setInterval doesn't pause your code, it just schedules some code to be run some time in the future. For example, when you do this:
var intId = setInterval(stall, 60000);
That says "every 60000 milliseconds, run the function stall". As soon as this line of code completes, it will immediately run your next line of code, do the saving, then clear the interval. Clearing the interval cancels it, so now nothing will happen in 60000 milliseconds.
Instead, you'll want to do something like this:
function saveHelper(formId) {
let count = 0;
const intId = setInterval(function () {
if(changed.length > 0) {
console.log('would save');
//document.getElementById(formId).submit();
}
count++;
if (count === 4) {
clearInterval(intId);
}
}, 60000);
}
Every 60000 milliseconds, the inner function will run, and do the saving. After saving, it checks how many times we've done this, and once it reaches 4, it clears the interval to stop it from happening any more.
I am trying to create a one-minute timer that runs twice. During the first run, the timer will countdown to 0. Then, the timer will reset to one minute and start the countdown again. To create this timer, I am using Javascript, which is a programming language that I am not particularly skilled at.
The timer works when I use it just once. However, when I try to use it in a for loop, create a recursive function, or even run it twice in a row by calling the function twice, the countdown is not consecutive. For example, it will display 4, then 2, then -1, even though the countdown is supposed to be consecutive and end at 0.
I have searched on StackExchange to find similar questions. I followed the answer to this question, but the countdown displayed NaN instead of the proper numbers. I have also read through a number of other questions, but their answers have not worked for me.
My Javascript code is:
window.onload = function() {
var seconds = 60;
function timeout() {
setTimeout(function () {
seconds--;
document.getElementById("time").innerHTML = String(seconds)
if (seconds > 0){
timeout();
}
}, 1000);
}
timeout()
seconds = 60;
timeout()
};
document.getElementById("time") refers to an empty paragraph with time as its ID.
Thank you in advance.
Your code is running the function twice at the same time. Try this, setting a separate counter, and stopping the timer once the count has reached a set number:
window.onload = function() {
var seconds = 60;
var count = 1;
function timeout() {
setTimeout(function() {
seconds--;
document.getElementById("time").innerHTML = String(seconds)
if (seconds > 0) {
timeout();
} else {
seconds = 60;
count++;
if (count <= 2) {
timeout();
}
}
}, 1000);
}
timeout();
};
<p id="time"> </p>
I have next code:
var timer = setInterval(function() {}, 1000)
When I try to output timer, it contains "2" (number).
Plunker: http://plnkr.co/edit/x0Iwc0ZjTI1HDFv9oxyc?p=preview
Please, explain me this behavior.
That's the interval ID. That's a number generated by the browser that you can reference later.
The reason for this is so you can use clearInterval to stop looping.
var timer = setInterval(function() {
// Will only run once
clearInterval(timer);
}, 1000);
I have this function:
function timedFunction(functionString,timeoutPeriod) {
setTimeout(functionString+"timedFunction(\""+functionString+"\","+timeoutPeriod+");",timeoutPeriod);}
This function me call:
timedFunction("startStopky();",1000);
startStopky(); is a function that I want in a specified time interval repeatedly run. Everything works excellently, but if I want stop this interval, I have to stop as follows:
for (var i = 1; i < 99999; i++) {
window.clearInterval(i);
}
Unfortunately this will stop all intervals, and I want to stop just one particular. How can I do it?
Instead of doing recursive calls to timedFunction just do:
var intervalId = setInterval(startStopky, 1000);
and to clear it just do:
clearInterval(intervalId);
The setTimeout function returns a timeout ID that you use with clearTimeout to remove that timeout. The same goes for intervals but in that case it's a setInterval and clearInterval combo.
E.g.:
var t = setTimeout(yourFunction, 1000);
clearTimeout(t);
var i = setInterval(yourFunction2, 500);
clearInterval(i);
You have a Timeout, but you are clearing an Interval. clearInterval clears intervals, not timeouts.
You want window.clearTimeout(timeoutId)
If you want to stop a single one, you use the processId of that interval.
window.clearTimeout("13");
You really shouldn't be using strings to do this:
function timedFunction(fn, interval) {
var timerHandle;
function runIt() {
fn();
timerHandle.id = setTimeout(runIt, interval);
}
return timerHandle = { id: setTimeout(runIt, interval) };
}
Then you can call it like this:
var handle = timedFunction(startStopky, 1000);
To stop the process:
clearTimeout(handle.id);