We Keep Coding

Check if text includes a specific value in text area

I have a JS where I can verify if the a value is being entered and warn the user to change the input.
the script is working fine only if only that value exist in the text and if the value with some other text will not work.
$(function() {
const setup = function(fieldSelector) {
const field = $(fieldSelector);
const applyStyle = function() {
if (field.val() == 'urgent')
{
alert("Text not allowed!");
field.css({'background-color': 'red'});
} else {
field.css({'background-color': ''});
}
};
field.on('change', applyStyle);
applyStyle();
}
// Note: Change the ID according to the custom field you want to target.
setup('#issue_custom_field_values_17');
});
this code is under redmine issue tracker.
Any guidance will be much appreciated

I'm very unfamiliar with jQuery, but couldn't you just replace
if (field.val() == 'urgent')
with
if (field.val().includes('urgent'))
or even
if (field.val().indexOf('urgent')>-1)

Jquery issue with val not working as expected

I have a couple of forms on a site. On the first form I used the code below to add a border color if the input field is not blank and remove it if it is blank. This works just fine no issues. But I've found that when I try to use the same method on other forms, to do something else using the same logic, it does not work.
I have read through many forums and what I'm seeing is that the code is only read on page load. But I have forms that run the function after the page is far past loading. Can someone give some light to this? I'm really trying to understand the way this works fully.
Code that works on form:
var checkErrorIn;
jQuery(document).ready(function ($) {
checkErrorIn = setInterval(CheckErrorInput, 0);
});
function CheckErrorInput() {
if (jQuery('body').is('.page-id-6334')) {
// First Name, Last Name validation colors
var pasdFName = jQuery('#first_name').val();
var pasdLName = jQuery('#last_name').val();
if (pasdFName != '') {
jQuery('#first_name').addClass('formConfirm_cc');
} else {
jQuery('#first_name').removeClass('formConfirm_cc');
}
if (pasdLName != '') {
jQuery('#last_name').addClass('formConfirm_cc');
} else {
jQuery('#last_name').removeClass('formConfirm_cc');
}
if (pasdFName != '' & pasdLName == '') {
jQuery('#last_name').addClass('formError_cc');
} else {
jQuery('#last_name').removeClass('formError_cc');
}
if (pasdFName == '' & pasdLName != '') {
jQuery('#first_name').addClass('formError_cc');
} else {
jQuery('#first_name').removeClass('formError_cc');
}
}
}
Code that is not working:
if (jQuery('body').is('.woocommerce-page')) {
var checkActiveName = jQuery('.woo_login_form > form > #username').val();
jQuery('.woo_login_form').on('input', function(){
jQuery('.woo_login_form').addClass('cdc_keep_active');
});
if (checkActiveName =='') {
jQuery('.woo_login_form').removeClass('cdc_keep_active');
}
}
What I am trying to do is fix an issue with a form becoming hidden if not hovered over even when the input has characters. Based on my research I figured I'd do the .on to get the class added when the input got characters. That works but the removal of the characters isn't removing the class. The logic looks right to me. What am I missing?
Thank you in advance for your help and insight.
Update:
Ok so I ended up doing this:
jQuery('.woo_login_form').on('click', function () {
jQuery('.woo_login_form').addClass('cdc_keep_active');
});
jQuery('.custom-login-box > a').on('click', function () {
jQuery('.woo_login_form').toggle();
});
For some reason my class would not add with any of the methods suggested individually so I combined the logic. The first part adds the class that makes the form visible but then the form won't close if clicked out of regardless of the 'removeClass'. So I added a toggle (thank you commenters) method to the "hovered link" to allow users to close the box if not needed.
Would still like to understand why the first method worked in one instance but not the other. Any and all insight appreciated. Thank you.

In your current code example you immediately check for the value of the username field.
var checkActiveName = jQuery('.woo_login_form > form > #username').val();
The thing with this is that checkActiveName will never change, unless it is reassigned elsewhere in the code.
What you need to do is to check the current value after every input of the user. That means moving that line of reading the value of the input inside the input event listener.
if (jQuery('body').is('.woocommerce-page')) {
var $wooLoginForm = jQuery('.woo_login_form');
var $userName = jQuery('#username'); // This ID should only exist once, so no need for complex selectors.
$wooLoginForm.on('input', function() {
var checkActiveName = $userName.val();
if (checkActiveName =='') {
$wooLoginForm.removeClass('cdc_keep_active');
} else {
$wooLoginForm.addClass('cdc_keep_active');
}
});
}
On a sidenote: using setInterval to validate your form is a bad practice. This would basically run infinitely. It doesn't have to. You only have to check if a form is valid after the user enters a value.
Apply the same technique with the event listener like in your second code snippet.
var $document = jQuery(document);
$document.ready(function ($) {
/**
* It might even be better to listen for the input event on the form
* that has to be validated, but I didn't see it in your code.
* Right now it listens for input on the entire page.
*/
$document.on('input', CheckErrorInput);
});

Hiding other elements by one input field

Please can you provide me some short help with my Javascript code. I have one input field which hides DIV element just if it is totally empty (without text):
if (search_value !== "") {
document.getElementById("frei").className = "frei1";
}
It does exactly what I want, the main problem is once the input field is activated by typing inside and when I start to erase the text until the input is empty, than my hidden DIV appear, even if the input contain no text (because I erased it). This function is good only on first page load, than when I type anything in input and erase it, my JavaScript code is not functional.
Please could you give me an advice how looks like Javasript code, which hide that DIV everytime input field contain no text? Even when the text was erased manually?
Thank you very much and apologize for that type of question. Iam not strong in basic Javascript.

That code will only execute on page load, yet you want it to run each time someone types into your input, to do that you can use the onkeyup event:
document.getElementById("yourInput").onkeyup = function () {
if (this.value !== "") {
document.getElementById("frei").className = "frei1";
}
else {
document.getElementById("frei").className = "";
}
};
DEMO
If you also need it to run on page load aswell however, extract it out to a function and then you can call the function on page load as well:
function setDisplay() {
if (document.getElementById("yourInput").value !== "") {
document.getElementById("frei").className = "frei1";
}
else {
document.getElementById("frei").className = "";
}
}
Then call it on page load:
setDisplay();
Then also attach it to the onkeyup event like we did in the first instance:
document.getElementById("yourInput").onkeyup = setDisplay;

document.getElementById("id").oninput = function() {
if (this.value !== "") {
document.getElementById("frei").className = "frei1";
}
}
or
document.getElementById("id").addEventListener('input',function() {
if (this.value !== "") {
document.getElementById("frei").className = "frei1";
}
}, false);

Unhide div using javascript object oriented

So i am having trouble unhiding a div, once it has been hidden.
The code:
First object
$('#filter_region').on('change', function(e) {
var temp_region_id = $('#filter_region').val();
filterRegionId($temp_region_id);
});
Seconds object:
function filterRegionId(temp_region_id)
{
if ($(temp_region_id) != 1) {
$('.showheadline').hide(); }
else { $('.showheadline').show(); }
}
Really what i want to do, is once the region is changed from the original, the div should be hidden - this works!
However, once the person goes back on the same region, the div is still hidden.
The filter_region echos from 1-8 depending on the region. I realise that i have set the region to 1, this is to test. However, even if the if-statement is set to 1, it still shows the divs when loaded, even if the region is 2-8. Hope this make any sense at all! Please feel free to ask if there are any questions regarding my explanation.
Best Regards,
Patrick

Try this, without the $(..) around the var
$('#filter_region').on('change', function(e) {
var temp_region_id = $('#filter_region').val();
filterRegionId(temp_region_id);
});
function filterRegionId(temp_region_id)
{
if (temp_region_id != 1) {
$('.showheadline').hide();
}
else {
$('.showheadline').show();
}
}

A text input's value attribute will always return a string. You need to parseInt the value to get an integer
var temp_region_id = parseInt($('#filter_region').val(),10);
and remove the $ from variable name filterRegionId($temp_region_id); and if ($(temp_region_id) != 1) {
$('#filter_region').on('change', function(e) {
var temp_region_id = parseInt($('#filter_region').val(),10);
///parse it to integer
filterRegionId(temp_region_id);
});
function filterRegionId(temp_region_id){
if (temp_region_id!= 1)
$('.showheadline').hide();
else
$('.showheadline').show();
}

The best solution is to rewrite you code a little.
Please add the filterRegion function on top and change the parametter name as follows
var temp_region_id = $('#filter_region').val();
filterRegionId(temp_region_id);
$('#filter_region').on('change', function(e) {
temp_region_id= $('#filter_region').val();
filterRegionId(temp_region_id);
});
function filterRegionId(temp_region_id)
{
if ($(temp_region_id) != 1) {
$('.showheadline').hide();
}
else {
$('.showheadline').show();
}
}

Why is my .blur() code only working on second blur?

I have an input, when the user enters something, my script sends the info over to a php script, which returns whether or not the entered text can be used.
If the text can not be used, it disables the submit button and adds a class to the reult text.
The problem have is strange, the ajax works, the result is returned, but the button disabling and adding of the class doesn't happen unless you focus and blur the input a second time.
Here is my code:
$('#alias').blur(function() {
if ($('#alias').val()) {
var aliascheck = $('#alias').val();
$(".aliascheck").load('checkalias.php?alias='+aliascheck);
var result = $('.aliascheck').text();
if (result.indexOf("Taken") != -1) {
$('#shorten').attr("disabled","disabled");
$('.aliascheck').addClass('error');
} else {
$('#shorten').removeAttr("disabled");
$('.aliascheck').removeClass('error');
}
}
});
The code is live here: http://markhenderson.ws/dev/tmtmu/
To replicate the "taken" event, enter "taken" as the alias. Any thing else will return available.
Does anyone know why this is happening?
Thanks

You need to put the code after the .load call into a callback function of the async call.
Something like:
$('#alias').blur(function() {
if ($('#alias').val()) {
var aliascheck = $('#alias').val();
$(".aliascheck").load('checkalias.php?alias='+aliascheck, function() {
var result = $('.aliascheck').text();
if (result.indexOf("Taken") != -1) {
$('#shorten').attr("disabled","disabled");
$('.aliascheck').addClass('error');
} else {
$('#shorten').removeAttr("disabled");
$('.aliascheck').removeClass('error');
}
});
}
});