Node.js execute Javascript file - javascript

This is a completely newbie question and I'm sure the solution is very easy but I don't get it.
I downloaded Node.js and put the command-tool file and the npm in my project file.
I created a file called example.js which contains
console.log("hello world");
Now I open the node file and type in
node example.js
And it shows me unexpected Identifier.
Thanks in advance.
Edit:
node -v
Shows node is not defined ?? ..
I'm slightly confused.
Edit2: MAC IOS
Edit3: I installed it and the path was usr/local/bin am I allowed to just move the file?
Edit4: Thanks node -v works now. I opened it through the cmd tool
Edit5: okay now everything works.. I thought I have to work with the node cmd tool. Thanks for the quick help!

Open terminal
Go to the folder you have your example.js (use cd-command)
type in terminal node example.js, press enter
You should not RUN node before typing node example.js

Related

Not able to run node in the terminal

I opened the terminal on my mac, and first checked that I have node installed: node -v
v14.17.5
I then tried to open a file I created index.html from Visual Studio Code and I got a throw err from the terminal. { The code:'Module_NOT_FOUND', requireStack:[] }
Thank you in advance for help.
node is a runtime environment that can execute javascript on a machine. So it can't read html file, but only js files. You can execute a js file with the following command in the terminal: node index.js
Et voilà.
Please note you can also write javascript directly in your terminal by entering a node environment.
node
const a = "hello"
a
// return "hello"
I think you are trying to run an html file using node
just change the index.html to index.js

My VS CODE extension code runner isnt working

Hi my issue is that in my visual studio code, my code runner extension doesn't provide any output. I've looked at a bunch of tutorials and have done everything, research, download node.js,and saves the file as a javascript file and verify paths.
I entered " console.log("Hello")
Its prints this out
[Running] node "c:\Users\NAME\Untitled-1.js
[Done] exited with code=0 in 0.202 seconds
And nothing
Please help idk what I'm doing wrong 😭
Looks like you haven't saved the file.
Try saving the file and then run with Code Runner.
Tip: You can enable Save before Run settings so that it gets saved every time before running the file.
File -> Preferences -> Extensions -> Run Code Configuration -> Save File Before Run
I recommend you to run node -v and npm -v in command prompt window to see if you have them installed
the output must be like this
C:\Users\Anonymous>node -v
v16.14.0
C:\Users\Anonymous>npm -v
8.3.1
and if there is a problem it might be from your paths ("Edit system environment variables" in windows search) or you haven't installed npm or node.
in my case solution was to uncheck "Show Execution Message" check box in Run Code configuration.
setting
result

Run Javascript file from command line

I have a javascript file hello.js with console.log("Hello World"). I want to run it from my terminal (I am on a mac). I have node installed and I take the following steps -
Open terminal and navigate to the directory where hello.js exists.
Run command "node hello.js"
But I dont see the console statement (Hello World) in my terminal.
Can some one please help me run javascript from terminal (or tell me what I am doing wrong) ?
PS: I have checked this thread but my problem still exists.
One possible error is that your JavaScript file doesn't end with a new line character.
The node parser will read the last line, but it won't completely process the line unless it includes a new line marker (or, possibly, a semicolon).
Make sure your file includes the new line (as well as, preferably, a semicolon), i.e.:
console.log("Hello World");
// EOF comment, to validate a new line marker after last line of code.
This might solve your issue - unless the reason for your issue lies somewhere else.
Good luck!
You have to first accurately create the path to the .js file. This is probably your problem.
When you first open the CLI (Command Line) there will be a path displayed.
For example...
C:\Users\yourname>
from there you have to get to where the file is located, so you type in..
C:\Users\yourname>cd\Users\yourname\Documents\course\jsfolder
cd means "change directory"..and just put the full path to where the file is located.
Now to see if you are there by typing dir on the end
C:\Users\yourname>\Documents\course\jsfolder>dir
This will list all the files in that last directory. You should see your New.js file in there. You are now ready to go!
Follow what Anupam said above...type.. node New.js ..and your file will run if you have node.js installed on your computer..BINGO!>
one last thing ..I believe the command "node" is "$node" on an Apple
There are a few additional solutions you could use other than node.
The expected behavior of node would be to print "Hello World" for you, and there has been help troubleshooting in the comments of your post.
jsc is included with macOS. You should make a link to the file first as described in this post, and change your console.log() methods to debug().
rhino is available from Mozilla. It would require you to switch your console.log() methods to print().
For installing rhino, you may be able to avoid some of the issues you've had with node by installing through homebrew. As a last means of troubleshooting node, you may also find it useful to reinstall it through homebrew.
You can Run your JavaScript File from your Terminal only if you have installed NodeJs runtime. If you have Installed it then Simply open the terminal and type “node FileName.js”.
Open Terminal or Command Prompt.
Set Path to where File is Located (using cd).
Type “node New.js” and Click Enter

How to Run JavaScript file with node.js on windows (scribbletune)

Is it possible to run a JavaScript file with node.js on windows? I have been trying to for hours and can't find any more solutions on the internet that work.
I have a js-file that uses scribbletune which only works with node.js.
I have node.js installed and I installed gitbash because it was recommended in a forum.
I tried to run from command prompt and gitbash but nothing seems to happen.
What am I doing wrong? Any help would be very much appreciated.
There is no need to install gitbash to use Node on Windows. It's a handy thing to have if you're used to a *nix environment. If you're not, it just gives you something more to learn, which isn't helpful if you're already in the middle of trying to learn Node.
Just:
Get the Windows installer from https://nodejs.org/en/download/
Run the Windows installer
Create a directory for your project
Open a Command Prompt Window to get a command line
Switch to your project directory
(Optional, but a good idea) Use npm init to create a package.json file (it'll walk you through it)
Install any libs you're going to be using via npm (for instance, npm install scribbletune from your command prompt window)
Put your JavaScript files in that directory
Use node main.js at the command line to run your main file (whatever it's called; main.js is just a placeholder)
Inorder to run a js (java script file) file
step 1. u need to go to the file location where u want to run.
step 2. just use "shift +right click".
u will see a pop-up and go to powershell or cmd.
step 3. type "node FILENAME.js"
final step: you will see the result ^.^

node js local enviroment setup

i m trying to create local enviroment for learning node.js
i m following the link below
http://www.tutorialspoint.com/nodejs/nodejs_environment_setup.htm
i downloaded Windows Installer (.msi) on my computer and create a file named main.js
console.log("main.js");
and i double clicked node.exe
on command prompt i m getting unexpected identifier exeption what s wrong?
After answers i also tried followings
i created a new folder on my desktop and accessed to it. i got same error.
i also used Windows Powershell
Don't put your files into the nodejs-folder!
Create a new folder (e.g. on your Desktop) and put main.js in it
Start a command prompt (hit Windows+R and type cmd.exe)
Navigate to your newly created folder using cd
Run main.js by typing node main.js
If you enter node and press enter, you start something like a console. You can directly write JavaScript commands, e.g.
C:\Temp>node
> console.log('Hello World');
Hello World
undefined
>
If you started node and then enter node main.js, node will try to understand this command as JavaScript which is obviously not JavaScript. What you want to do is to enter node main.js directly:
C:\Temp>node main.js
Hello World
See the difference: In the first example you start node and then enter some JavaScript commands and in the second example you start node but with the parameter main.js which tells node not to start this "console" but to load this file and run it.
You are expected to type node filename.js from your command line shell.
You've run node (presumably by double clicking its icon) and are trying to type node filename.js from the node REPL instead of your shell.
Open Zsh, Bash, Windows Powershell or similar and run it from there.
Access your file from a command Prompt like node yourFile. Also make sure you have installed node properly.To check that just type node -v, it should give you the current node version. If all these things are done then check for errors in server.js, which is main.js in your case.

Categories