Angular: How to get an input value using $this - javascript

I am hoping to get an input value inside a keyup function that can runs from multiple inputs. Every time there is a keyup the function will trigger according to the specific input. So, I am trying to use $this inside the function. No succes so far..
HTML code:
<input ng-keyup="getRxcui()" placeholder="Type med a" id="medicineA" />
<input ng-keyup="getRxcui()" placeholder="Type med b" id="medicineB" />
Angular code:
var rxConflicts = angular.module('rxConflicts', []);
rxConflicts.controller('MainController', function($scope, $http){
$scope.getRxcui = function(event){
// getting the value for each medicine input
var medValue = $(this).value;
console.log(medValue);
}
});
I am pretty sure $(this) is the right way to do this so that I don't need to duplicate that function for each input and use ng-model... You can take my word that the angular works fine.
Any help is appreciated. Thanks

use ng-model and pass it in function:
<input ng-keyup="getRxcui(medicineA)" ng-model="medicineA" placeholder="Type med a" id="medicineA" />
<input ng-keyup="getRxcui(medicineB)" ng-model="medicineB" placeholder="Type med b" id="medicineB" />
Angular code:
var rxConflicts = angular.module('rxConflicts', []);
rxConflicts.controller('MainController', function($scope, $http){
$scope.getRxcui = function(value){
// getting the value for each medicine input
var medValue = value;
console.log(medValue);
}
});

Angular 2 and superior:
You could pass the $event on the keyUp and use it to get the target (the input) and it's value. In case you're using formControls and not binding directly through ngModel
Template HTML:
<input (keyup)="getRxcui($event)">
Component.ts
getRxcui(event){
var inputValue = event.target.value;
console.log(inputValue);
}

Related

Set 'value' input with AngularJS function

I'm kinda noob with AngularJS I have the next div:
<div ng-app="" ng-controller="telController">
Teléfono: <input type="text" ng-model="telefono.numero" ><br>
<input type="text" ng-model="telefono.tras" >
<br>
El telefono es: {{telefono.telefonoCodificado()}}
</div>
The angularjs function is:
function telController($scope) {
$scope.telefono = {
numero: "",
telefonoCodificado: function() {
var x;
x = $scope.telefono;
var parte1;
parte1= $scope.telefono.numero;
var telCodificado = parte1.substring(0, 3)+"-"+parte1.substring(3, 6)+"-"+parte1.substring(6, 10);
return "A) "+x.numero+" <<>> "+ telCodificado;
},
tras : function(){
var y;
y = $scope.telefono.numero;
return y;
}
};
}
I want the input with ng-model='telefono.tras' get filled with the value that have been typing in the input ng-model="telefono.numero" but that doesn´t happend, what am I doing wrong?
New Answer:
After being updated on the issue, its better to use a ng-change to update the other variable.
JSFiddle Demo
Old Answer:
Hi There is no need to write a separate function to copy the ng-model (telefono.numero) to the variable telefono.tras, you can just assign the same variable. Like so.
JSFiddle Demo
Suppose you need telefono.tras populated for some function, then before calling the function, assign the telefono.numero value to telefono.tras.
So if you want to populate telefono.tras you can use the $watch() method to do this!
$scope.$watch('telefono.numero', function(newValue, oldValue){
$scope.telefono.tras = newValue;
})
JSFiddle Demo
I hope this answer was useful, please let me know if there are any issues.
Suggestion: The input box is allowing numbers and text, to allow only numbers you need to add a directive, refer this link

Get value from getElementById in angular js

View
<button class="ion-ios-close-outline" ng-click="change()"></button>
<label class="item item-input">
<input id='test' type="text" ng-value="77"/>
</label>
Controller
$scope.change = function () {
var x=angular.element(document.getElementById("test"));
alert(x.value);
};
The output is undefined.
What am i doing wrong in here?
Please help.
angular.element returns wrapper of jQlite. It's similar to jquery. So it doesn't support value.
Either use
x.val()
or
x[0].value
Either way i would recommend not to use such type of changes in controller. It should be done only in directives.
You should use model of input box to access such values in controllers.
Use ng-model on your input;
set ng-model='test'
<input id='test' type="text" ng-model='test' ng-value="77"/>
and on the change function set
var x=$scope.test;
alert(x);
Edited
var a = angular.element(document.getElementById('t'));
var attr = a[0].attributes;
var value = attr.getNamedItem("ng-value");
console.log(value.value);
In my opinion your solution is bad.
Angular API allow to use data binding.
So you should use ng-model in you input compoment for example:
<button class="ion-ios-close-outline" ng-click="change()"></button>
<label class="item item-input">
<input id='test' type="text" ng-model="test"/>
$scope.test = 77;
$scope.change = function () {
alert($scope.test);
};

Angularjs ng-required call function

It is possible make the required value dependet of some funcion?
Something like this? I want to do this because I want to change the required attribute to some form inputs...
HTML:
Name: <input type="text" ng-model="user.name" ng-required="isRequired('name')" />
Age: <input type="text" ng-model="user.age" ng-required="isRequired('age')" />
JS:
$scope.isRequired(fieldName){
$scope.requiredFields = [];
//$scope.requiredFields = STUFF FROM SOME REST SERVICE
for (i in requiredFields) {
if (requiredFields[i] == fieldName){
return true;
}
}
return false;
}
Updated Answer:
So based on your updated OP, what you want is certainly doable. The problem with what you were trying to do is that ng-required has no ability to execute a function, it only reads a boolean. But we can dynamically create variables based on data from the server to automatically set fields to required:
Updated Plunker
<form>
Name: <input type="text" ng-model="user.test" ng-required="name" /><br/>
<input type="text" ng-model="user.name" ng-required="age" />
<br/>
<button type="submit">Submit</button>
</form>
Note that I put a $scope property for each input in the ng-required attribute. Now we can dynamically create that $scope property and set it to true if our data says we need to:
$scope.isRequired = function(){
$scope.requiredFields = [];
$http.get('fields.json')
.success(function(data){
$scope.requiredFields = angular.fromJson(data);
console.log($scope.requiredFields.required)
for (i = 0; i < $scope.requiredFields.required.length; i++) {
$scope[$scope.requiredFields.required[i]] = true
}
console.log($scope[$scope.requiredFields.required[0]]);
})
//$scope.requiredFields = STUFF FROM SOME REST SERVICE
}
$scope.isRequired()
So it is iterating over an array of required fields received from the server, and then dynamically creating a $scope property for each one that is required, and setting it to true. Any field that has that $scope property in it's ng-required will be required now. Anything not dynamically created will just return false, and ng-required doesn't trigger.
Original answer:
Plunker
As Pratik mentioned, ng-required only accepts a Boolean value, but we can toggle the value of that with a function.
HTML
<form>
Name: <input type="text" ng-model="user.name" ng-required="isRequired" />
<br/><button ng-click="toggle()">Required: {{isRequired}}</button>
<button type="submit">Submit</button>
</form>
code:
$scope.isRequired = true;
$scope.toggle = function() {
$scope.isRequired = !$scope.isRequired;
}
I know this is a couple of years old and so AngularJS may have changed, but the accepted answer as it stands today isn't correct. You can very easily execute a function within ng-required, as it takes an expression, which can be a function. For example:
index.html
<div ng-controller="ExampleController" class="expressions">
Expression:
<input type='text' ng-model="expr" size="80"/>
<button ng-click="addExp(expr)">Evaluate</button>
<ul>
<li ng-repeat="expr in exprs track by $index">
[ X ]
<code>{{expr}}</code> => <span ng-bind="$parent.$eval(expr)"></span>
</li>
</ul>
</div>
script.js
angular.module('expressionExample', [])
.controller('ExampleController', ['$scope', function($scope) {
var exprs = $scope.exprs = [];
$scope.expr = '3*10|currency';
$scope.addExp = function(expr) {
exprs.push(expr);
};
$scope.removeExp = function(index) {
exprs.splice(index, 1);
};
}]);
In script.js, a function addExp is defined and added to the scope, and then it's called in the ng-click directive of the a tag, which also takes an expression as its argument.
This code is taken directly from the AngularJS documentation on expressions. It doesn't use ng-require directly, but any directive that takes an expression will work the same. I have used the same syntax to use a function for ng-require.

AngularJS does not send hidden field value

For a specific use case I have to submit a single form the "old way". Means, I use a form with action="". The response is streamed, so I am not reloading the page. I am completely aware that a typical AngularJS app would not submit a form that way, but so far I have no other choice.
That said, i tried to populate some hidden fields from Angular:
<input type="hidden" name="someData" ng-model="data" /> {{data}}
Please note, the correct value in data is shown.
The form looks like a standard form:
<form id="aaa" name="aaa" action="/reports/aaa.html" method="post">
...
<input type="submit" value="Export" />
</form>
If I hit submit, no value is sent to the server. If I change the input field to type "text" it works as expected. My assumption is the hidden field is not really populated, while the text field actually is shown due two-way-binding.
Any ideas how I can submit a hidden field populated by AngularJS?
You cannot use double binding with hidden field.
The solution is to use brackets :
<input type="hidden" name="someData" value="{{data}}" /> {{data}}
EDIT : See this thread on github : https://github.com/angular/angular.js/pull/2574
EDIT:
Since Angular 1.2, you can use 'ng-value' directive to bind an expression to the value attribute of input. This directive should be used with input radio or checkbox but works well with hidden input.
Here is the solution using ng-value:
<input type="hidden" name="someData" ng-value="data" />
Here is a fiddle using ng-value with an hidden input: http://jsfiddle.net/6SD9N
You can always use a type=text and display:none; since Angular ignores hidden elements. As OP says, normally you wouldn't do this, but this seems like a special case.
<input type="text" name="someData" ng-model="data" style="display: none;"/>
In the controller:
$scope.entityId = $routeParams.entityId;
In the view:
<input type="hidden" name="entityId" ng-model="entity.entityId" ng-init="entity.entityId = entityId" />
I've found a nice solution written by Mike on sapiensworks. It is as simple as using a directive that watches for changes on your model:
.directive('ngUpdateHidden',function() {
return function(scope, el, attr) {
var model = attr['ngModel'];
scope.$watch(model, function(nv) {
el.val(nv);
});
};
})
and then bind your input:
<input type="hidden" name="item.Name" ng-model="item.Name" ng-update-hidden />
But the solution provided by tymeJV could be better as input hidden doesn't fire change event in javascript as yycorman told on this post, so when changing the value through a jQuery plugin will still work.
Edit
I've changed the directive to apply the a new value back to the model when change event is triggered, so it will work as an input text.
.directive('ngUpdateHidden', function () {
return {
restrict: 'AE', //attribute or element
scope: {},
replace: true,
require: 'ngModel',
link: function ($scope, elem, attr, ngModel) {
$scope.$watch(ngModel, function (nv) {
elem.val(nv);
});
elem.change(function () { //bind the change event to hidden input
$scope.$apply(function () {
ngModel.$setViewValue( elem.val());
});
});
}
};
})
so when you trigger $("#yourInputHidden").trigger('change') event with jQuery, it will update the binded model as well.
Found a strange behaviour about this hidden value () and we can't make it to work.
After playing around we found the best way is just defined the value in controller itself after the form scope.
.controller('AddController', [$scope, $http, $state, $stateParams, function($scope, $http, $state, $stateParams) {
$scope.routineForm = {};
$scope.routineForm.hiddenfield1 = "whatever_value_you_pass_on";
$scope.sendData = function {
// JSON http post action to API
}
}])
I achieved this via -
<p style="display:none">{{user.role="store_user"}}</p>
update #tymeJV 's answer
eg:
<div style="display: none">
<input type="text" name='price' ng-model="price" ng-init="price = <%= #product.price.to_s %>" >
</div>
I had facing the same problem,
I really need to send a key from my jsp to java script,
It spend around 4h or more of my day to solve it.
I include this tag on my JavaScript/JSP:
$scope.sucessMessage = function (){
var message = ($scope.messages.sucess).format($scope.portfolio.name,$scope.portfolio.id);
$scope.inforMessage = message;
alert(message);
}
String.prototype.format = function() {
var formatted = this;
for( var arg in arguments ) {
formatted = formatted.replace("{" + arg + "}", arguments[arg]);
}
return formatted;
};
<!-- Messages definition -->
<input type="hidden" name="sucess" ng-init="messages.sucess='<fmt:message key='portfolio.create.sucessMessage' />'" >
<!-- Message showed affter insert -->
<div class="alert alert-info" ng-show="(inforMessage.length > 0)">
{{inforMessage}}
</div>
<!-- properties
portfolio.create.sucessMessage=Portf\u00f3lio {0} criado com sucesso! ID={1}. -->
The result was:
Portfólio 1 criado com sucesso! ID=3.
Best Regards
Just in case someone still struggles with this, I had similar problem when trying to keep track of user session/userid on multipage form
Ive fixed that by adding
.when("/q2/:uid" in the routing:
.when("/q2/:uid", {
templateUrl: "partials/q2.html",
controller: 'formController',
paramExample: uid
})
And added this as a hidden field to pass params between webform pages
<< input type="hidden" required ng-model="formData.userid" ng-init="formData.userid=uid" />
Im new to Angular so not sure its the best possible solution but it seems to work ok for me now
Directly assign the value to model in data-ng-value attribute.
Since Angular interpreter doesn't recognize hidden fields as part of ngModel.
<input type="hidden" name="pfuserid" data-ng-value="newPortfolio.UserId = data.Id"/>
I use a classical javascript to set value to hidden input
$scope.SetPersonValue = function (PersonValue)
{
document.getElementById('TypeOfPerson').value = PersonValue;
if (PersonValue != 'person')
{
document.getElementById('Discount').checked = false;
$scope.isCollapsed = true;
}
else
{
$scope.isCollapsed = false;
}
}
Below Code will work for this IFF it in the same order as its mentionened
make sure you order is type then name, ng-model ng-init, value. thats It.
Here I would like to share my working code :
<input type="text" name="someData" ng-model="data" ng-init="data=2" style="display: none;"/>
OR
<input type="hidden" name="someData" ng-model="data" ng-init="data=2"/>
OR
<input type="hidden" name="someData" ng-init="data=2"/>

Trying to update one input's value to another's using angularjs

I'm fairly new using AngularJS but I've been using for a pet project and I've run in to an issue. What I basically want to do is take the text input from this input field:
<form id="ci_search_form">
<p class="input-append"><label>Search:</label> <input type="text" id="query" ng:model="query" autofocus> <button ng:click="clearSearch()" class="btn"><i class="icon-remove"></i></button></p>
</form>
and update this input field's value with that value:
<div><input type="text" id="ciquery" ng:model="ciquery.Name"></div>
The second input filters some data and I can type in that directly and it works. However this page will have different sets of data, each with their own search input that I want updated by the master input at the top. I can't set value="" or use jQuery to set the value either, it just appears blank unless I explicitly type in that second input field. Can anyone assist with a solution?
EDIT
I thought I should include my app and controller code:
var App = angular.module('TicketAssistApp', []);
App.controller('SearchController', function($scope, $http, $filter){
$scope.query = '';
$http.get('static/ci_list.json').success(function(data){
$scope.ci_list = data;
});
$scope.clearSearch = function(){
$scope.query = '';
}
});
EDIT 2
Made some progress. Created a function that can be called an update ciquery in $scope:
var App = angular.module('TicketAssistApp', []);
App.controller('SearchController', function($scope, $http, $filter){
$scope.query = '';
$scope.ciquery = '';
$http.get('static/ci_list.json').success(function(data){
$scope.ci_list = data;
});
$scope.queryUpdate = function(){
$scope.ciquery = $scope.query;
}
$scope.clearSearch = function(){
$scope.query = '';
$scope.queryUpdate();
}
});
This works great. However, this creates another issue. Before in ciquery I was using ciquery.Name to filter only on the Name attribute. With this new solution I had to change it to this:
<div><input type="hidden" id="ciquery" ng:model="ciquery"></div>
This searches all fields in my data which returns unwanted results. Suggestions?
$scope and ng-model are differents. You should give ng-model's property to ng-click's function. Looks at this -> Ng-model does not update controller value
To update second input's field (here an example -> http://jsfiddle.net/yEvSL/1/)
<div><input type="text" id="ciquery" ng:model="query"></div>

Categories