I have been trying to get this to work for the past 6 hours and I am just unable to do it right. I've looked at the questions and solutions on SO as well to no avail. What am I doing horribly wrong?!?
All I have is a html5 page with no background. In my javascript code I call upon this method when the document is ready:
/*
* Initializes the landing page.
*/
function initializeLanding(){
$('body').css({
'backround':'url("http://40.media.tumblr.com/290e7a272b492735ddf8cd968e657d05/tumblr_nhmg6xYnv41u7ns0go1_1280.jpg")'
});
}
It should be something stupidly simple, and yet here I am. I've tried using single quotes, double quotes, without multiple attributes, etc. I would also much rather not use CSS or DOM properties to change the background, as I have set up way points along the page to change the background upon scrolling past them.
Also, if I call the .css() method and put in new attributes, will it overwrite all the old ones, or just the stated attributes in the latest css() call?
Update: here is where I call the function:
var main = function(){
$(".owl-carousel").owlCarousel();
lorem();
initializeLanding();
}
$(document).ready(main);
you have a spelling mistake.
backround => background.
check this demo
you have a spelling mistake. replace backround to background
function initializeLanding(){
$('body').css({
'background':'url("http://40.media.tumblr.com/290e7a272b492735ddf8cd968e657d05/tumblr_nhmg6xYnv41u7ns0go1_1280.jpg")'
});
}
Related
I am using jQuery to append elements to a div, and all works fine.
var new_div = $('<div>My stuff</div>');
new_div.appendTo("#container");
However, I'd like the div to appear by fading in, instead of abruptly.
I notice though that I get an error when I try to access graphic properties on my dynamically generated element. So this, for example fails:
new_div.hide().fadeIn();
The console reports the following error:
TypeError: jQuery.curCSS is not a function
Do I understand this correctly, that this fails because current css properties are not defined for the dynamically generated element? Or what else can be goingg wrong?
Important edit
Additional checking and working on this pointed out to a complete misunderstanding from my part. This has nothing to do with the fact that the element was dynamically generated. I got the same thing by calling fadeIn() on whatever element.
I sincerely apologize!
I still didn't get, though, why this happens
Adding elements to the DOM takes some time, miliseconds maybe, but it's still a reason for jquery not be able to find the element.
This process might be even slower if the DOM is a large html page.
Write your code like this:
var new_div = $('<div>My stuff</div>');
new_div.appendTo("#container");
setTimeout( function(){
new_div.hide().fadeIn();
} , 150); // 100 could be also good
It might be enough time for jquery to catch the element.
I would add an id to keep track of all elements I'm creating (just my preference, but it makes it easier to code it).
var new_div = '<div id="myNewDiv1" style="display:none;">My Styff</div>'
$('body').append(new_div);
$('#myNewDiv1').fadeIn();
It does seem to be a compatibility question, although I wasn't able to figure out exactly why and how to fix it.
Adding this code fixes the problem though:
jQuery.curCSS = function(element, prop, val) {
return jQuery(element).css(prop, val);
};
I have a bizzare problem which I have been trying to resolve. Its very basic but I just don't get it. Here it is. I am using JQuery to animate a simple display of a div element to a "block" from "none." I tried the following two options:
$('#fort_link').click(function(){
$('#fort_content').animate({'display':'block'},500);
});
$('#fort_link').click(function(){
$('#fort_content').animate({display:'block'},500);
});
I also tried with the callback function after animation is done and it does alert me but nothing really happens as far as setting the display of the div to block.
But, when I try using simple .css method as shown below, it works, as expected. I am using JQuery 1.10.2. I even tried linking to Google's Jquery UI on the CDN. I am not exactly a novice in these things... May be just missing something stupid? Please help!
$('#fort_link').click(function(){
$('#fort_content').css('display','block');
});
use fadeIn() or fadeOut instead:
$('#fort_link_show').click(function(){
$('#fort_content').fadeIn(500);
});
$('#fort_link_hide').click(function(){
$('#fort_content').fadeOut(500);
});
or fadeToogle() for shorthand.
$('#fort_link').click(function(){
$('#fort_content').fadetoggle(500);
//#fort_content will fadeIn if its hidden, fadeOut if its visible
});
From the jQuery docs:
All animated properties should be animated to a single numeric value,
except as noted below; most properties that are non-numeric cannot be
animated using basic jQuery functionality (For example, width, height,
or left can be animated but background-color cannot be
So basically, you can't 'animate' block.
I have a div:
<div id="div" style="height:150px; border:solid thin blue;"></div>
is there a way to retrieve the original div height? The div is resizable, so the user may have resized it before my code loads.
Note: my code is a jQuery plugin, so I have no clue about what happened to the element before my plugin is called (so please don't tell me to store height in element data...)
jqFiddle in this demo, I want to get the 150 after resizing the div.
Any help would be greatly appreciated!
No, because resizable() method override inline style height value.
You need to store it somewhere else.
For example before making div resizable:
var originalHeight = $('#div').height();
$('#div').resizable();
$('#cmd').button().click(function(){
alert(originalHeight);
});
I don't know of a way to get old data from the DOM, but could you not insist on the plugin having an init function called and get the values then? You could also advise in your documentation that the elements not be moved until you've completed the init function, although if it's called via .ready() this should occur before the user has a chance to blink anyway.
How is the div resizable, using jquery-ui?
Another option might be to get the page again using ajax and then parse the page, but it would be a lot of effort and very messy.
originalHeight=0;
$(document).ready(function()
{
originalHeight= $("#div").height()
});
I have a pretty specific scenario where I would like to select all elements with jQuery, make a CSS change, save the elements, then reverse the change I made.
The Goal
I created a jQuery plugin called jQuery.sendFeedback. This plugin allows the user to highlight areas of the screen, as shown in this demo. When they submit their feedback the plugin grabs all the HTML on the page and dumps it into a callback function. Like so:
$('*').each(function ()
{
$(this).width($(this).width());
$(this).height($(this).height());
});
var feedbackInformation = {
subject: $feedbackSubject.val(),
details: $feedbackDetails.val(),
html: '<html>' + $('html').html() + '</html>'
};
if (settings.feedbackSent)
settings.feedbackSent(feedbackInformation);
The callback function accepts this feedback information and makes an AJAX call to store the page HTML on the server (this HTML includes the red box highlights the user drew on the screen). When someone from tech support needs to view the user's "screen shot" they navigate to a page that serves up the stored HTML so the developer can see where the user drew their highlights on the screen.
My original problem was that different screen resolutions made the elements different sizes and the red highlights would highlight the wrong areas as the screen changed. This was fixed pretty easily by selecting all elements on the page and manually setting their height and width to their current height and width when the user takes the snap shot. This makes all the element sizes static, which is perfect.
$('*').each(function ()
{
$(this).width($(this).width());
$(this).height($(this).height());
});
The Problem
The issue with this is that when the plugin is done transmitting this HTML the page currently being viewed now has static heights and widths on every element. This prevents dropdown menus and some other things from operating as they should. I cannot think of an easy way to reverse the change I made to the DOM without refreshing the page (which may very well end up being my only option). I'd prefer not to refresh the page.
Attempted Solution
What I need is a way to manipulate the HTML that I'm sending to the server, but not the DOM. I tried to change the above code to pull out the HTML first, then do the operation on the string containing the HTML (thus not affecting the DOM), but I'm not quite sure what I'm doing here.
var html = '<html>' + $('html').html() + '</html>';
$('*', html).each(function ()
{
$(this).width($(this).width());
$(this).height($(this).height());
});
This did not work. So either I need to be able to manipulate the string of HTML or I need to be able to manipulate the DOM and undo the manipulation afterward. I'm not quite sure what to do here.
Update
I employed the solution that I posted below it is working beautifully now. Now I am wondering if there is a way to statically write all the css for each element to the element, eliminating the need for style sheets to be referenced.
I think you are mostly on the right track by trying to make the modifications to the HTML as a string rather than on the current page for the user.
If you check this post, you might also want to follow the recommendation of creating a temporary <div> on the page, cloning your intended content to the new <div> ensuring it is invisible using "display:none." By also putting a custom Id on the new <div> you can safely apply your static sizing CSS to those elements using more careful selectors. Once you have sent the content to the server, you can blow away the new <div> completely.
Maybe?
After much pain and suffering I figured a crude but effective method for reverting my modifications to the DOM. Though I hadn't gotten around to trying #fdfrye's suggestion of cloning, I will be trying that next to see if there is a mroe elegant solution. In the meantime, here is the new code in case anyone else can benefit from it:
$('*').each(function () {
if ($(this).attr('style'))
$(this).data('oldStyle', $(this).attr('style'));
else
$(this).data('oldStyle', 'none');
$(this).width($(this).width());
$(this).height($(this).height());
});
var html = '<html>' + $('html').html() + '</html>';
$('*').each(function () {
if ($(this).data('oldStyle') != 'none')
$(this).attr('style', $(this).data('oldStyle'));
else
$(this).removeAttr('style');
});
When I'm looping through every element and modifying the css, I log the original value onto the element as data. After I assign the DOM HTML to a variable I then loop through all elements again and restore the style attribute to its original value. If there was no style attribute then I log 'none' to the element data and then remove the style attribute entirely when looping through again.
This is more performance heavy than I wish it was since it loops through all elements twice; it takes a few seconds to finish. Not horrible but it seems like a little much for such a small task. Anyway, it works. I get a string with fixed-sized HTML elements and the DOM goes back to normal as if the plugin never touched it.
I'm modifying some code from a question asked a few months ago, and I keep getting stymied. The bottom line is, I hover over Anchors, which is meant to fade in corresponding divs and also apply a "highlight" class to the Anchor. I can use base JQuery and get "OK" results, but mouse events are making the user experience less than smooth.
I load JQuery 1.3 via Google APIs.
And it seems to work. I can use the built in hover() or mouseover(), and fadeIn() is intact... no JavaScript errors, etc. So, JQuery itself is clearly "loaded". But I was facing a problem that it seemed everyone was recommending hoverIntent to solve.
After loading JQuery, I load the hoverIntent JavaScript. I've triple-checked the path, and even dummy-proofed the path. I just don't see any reasonable way it can be a question of path.
Once the external javascripts are (allegedly) loaded in, I continue with my page's script:
var $old=null;
$(function () {
$("#rollover a").hoverIntent(doSwitch,doNothing)
});
function doNothing() {};
function doSwitch() {
var $this = $(this);
var $index = $this.attr("id").replace(/switch/, ""); //extract the index number of the ID by subtracting the text "switch" from its name
if($old!=null) $old.removeClass("highlight"); //remove the highlight class from the old (previous) switch before adding that class to the next
$this.addClass("highlight"); //adds the class "highlight" to the current switch div
$("#panels div").hide(); //hide the divs inside panels
$("#panel" + $index).fadeIn(300); //show the panel div "panel + number" -- so if switch2 is used, panel2 will be shown
$old = $this; //declare that the current switch div is now "old". When the function is called again, the old highlight can be removed.
};
I get the error:
Error: $("#rollover a").hoverIntent is not a function
If I change to a known-working function like hover (just change ".hoverIntent" to ".hover") it "works" again. I'm sure this is a basic question but I'm a total hack when it comes to this (as you can see by my code).
Now, for all appearances, it SEEMS like either the path is wrong (I've zillion-checked and even put it on an external site with an HTTP link that I double-checked; it's not wrong), or the .js doesn't declare the function. If it's the latter, I must be missing a few lines of code to make the function available, but I couldn't find anything on the author's site. In his source code he uses a $(document).ready, which I also tried to emulate, but maybe I did that wrong, too.
Again, the weird bit is that .hover works fine, .hoverIntent doesn't. I can't figure out why it's not considered a function.
Trying to avoid missing anything... let's see... there are no other JavaScripts being called. This post contains all the Javascript the page uses... I tried doing it as per the author's var config example (hoverIntent is still not a function).
I get the itching feeling I'm just missing one line to declare the function, but I can't for the life of me figure out what it is, or why it's not already declared in the external .js file. Thanks for any insight!
Greg
Update:
The weirdest thing, since I'm on it... and actually, if this gets solved, I might not need hoverIntent solved:
I add an alert to the "doNothing" function and revert back to plain old .hover, just to see what's going on. For 2 of my 5 Anchors, as soon as I hover, doNothing() gets called and I see the alert. For the other 3, doNothing() correctly does NOT get called until mouseout. As you can see, the same function should apply for any Anchor inside of "rollover" div. I don't know why it's being particular.
But:
If I change fadeIn to another effect like slideDown, doNothing() correctly does NOT get called until mouseout.
when using fadeIn, doNothing() doesn't get called in Opera, but seems to get called in pretty much all other browsers.
Is it possible that fadeIn itself is buggy, or is it just that I need to pass it an appropriate callback? I don't know what that callback would be, if so.
Cheers for your long attention spans...
Greg
Hope I didn't waste too many people's time...
As it turns out, the second problem was 2 feet from the screen, too. I suspected it would have to do with the HTML/CSS because it was odd that only 2 out of 5 elements exhibited strange behaviour.
So, checked my code, dug out our friend FireBug, and discovered that I was hovering over another div that overlapped my rollover div. Reason being? In the CSS I had called it .panels instead of .panel, and the classname is .panel. So, it used defaults for the div... ie. 100% width...
Question is answered... "Be more careful"
Matt and Mak forced me to umpteen-check my code and sure enough I reloaded JQuery after loading another plugin and inserting my own code. Since hoverIntent modifies JQuery's hover() in order to work, re-loading JQuery mucked it up.
That solved, logic dictated I re-examine my HTML/CSS in order to investigate my fadeIn() weirdness... and sure enough, I had a typo in a class which caused some havoc.
Dumb dumb dumb... But now I can sleep.