I want to trigger a function that changes the state of my button in a webpage. My input initially looks like this:-
Now when I type something in the text box, I want it to change like this:-
Notice the call button getting activated. I am using the onblur method to listen for changes, but this does not happen dynamically. I enter something in the box, and then click outside. That is the point when onblur executes.
How do I call the onblur method as soon as the user changes the value in box?
Here is the javascript code I am using
function toggleCallButton() {
if (document.getElementById('dialArea').value == '') {
document.getElementById('callButton').classList
.add('input-group-addon-disabled');
document.getElementById('callButton').classList
.remove('input-group-addon-active');
} else {
document.getElementById('callButton').classList
.remove('input-group-addon-disabled');
document.getElementById('callButton').classList
.add('input-group-addon-active');
}
}
Have you tried this?
<input type="text" onchange="toggleCallButton();"/>
Edit:
<body>
<div>
<input id="dialArea" type="text" onkeyup="toggleCallButton();" />
<div id="callButton">Call Button</div>
</div>
</body>
CSS
.input-group-addon-disabled{
opacity: 0.5;
}
.input-group-addon-active{
opacity: 1;
}
JAVASCRIPT
function toggleCallButton() {
if (document.getElementById('dialArea').value == '') {
document.getElementById('callButton').classList.add('input-group- addon-disabled');
document.getElementById('callButton').classList.remove('input-group-addon-active');
} else {
document.getElementById('callButton').classList.remove('input-group-addon-disabled');
document.getElementById('callButton').classList.add('input-group-addon-active');
}
}
window.onload = toggleCallButton;
Related
I have some javascript which essentially removes a class which has a background image on focus, i.e clicking in the input box (which has the background image).
The code is as follows:
$(function(){
$("#ets_gp_height").focus(function(){
if(!$(this).hasClass("minbox")) {
} else {
$(this).removeClass("minbox");
}
});
});
This works well, and removes .minbox when the user clicks within the input field, however what i want to do is if the user makes no changes to the input field, it should add the class back in as per at the beginning. At the moment, once the user clicks once, the class is gone for good, i would like it to come back if the user makes no changes to the input box, so for example clicks the input field but then clicks back out again without entering anything.
Any help? Possible?
I'm assuming you don't want the class .minBox to be added if the user has entered a value, but only if they decided not to enter anything, or chose to erase what they had entered.
To do this, you can use the blur event and check if there's anything entered:
$("#ets_gp_height").blur(function()=> {
if($(this).val().length < 1) $(this).addClass('minBox');
});
This will work for TABing out of the input and CLICKing out of it.
$(document).on("blur", "#ets_gp_height", function(){
if($(this).val() == '') {
$(this).addClass('minBox');
}
});
This code will add class 'minBox' when ever user goes out of input field without entering any value.
A working example, with and without jQuery:
Note: with onblur solution, method is called each time the field is blured, even when the value hasn't changed. with onchange solution, method is called only when the value has changed. That why onchange is a better solution.
WITHOUT JQUERY
function onChange(input){
input.value.length > 0 || setClassName(input, 'minbox') ;
}
function onFocus(input){
if(input.className == 'minbox')
{
input.className = '' ;
}
}
function setClassName(o, c){ o.className = c; }
input.minbox {background-color:red;}
<input type="text" id="ets_gp_height" class="minbox" onchange="onChange(this)" onfocus="onFocus(this)">
WITH JQUERY:
$(function(){
$("#ets_gp_height").change(function(){
$(this).val().length > 0 || $(this).addClass("minbox");
})
$("#ets_gp_height").focus(function(){
if(!$(this).hasClass("minbox")) {
} else {
$(this).removeClass("minbox");
}
});
});
input.minbox {background-color:red;}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<input type="text" id="ets_gp_height" class="minbox">
Here is a default(html5) color selector:
<input id='color-picker' type=color value='#ff0000'>
By click on the element, a default color-picker dialog opens.
I can easily track the color change event:
$('#color-picker').on('change', function() {
console.log($(this).val());
});
How dialog window close event can be handled? For example, when user clicks Cancel button?
Here is jsfiddle additionally.
Unfortunately, the exact functionality is not possible. I even read through the stack link, it seems that file calls the change event regardless of change, whereas color does not... So, I added the code to the blur event instead. When the user click off the value after editing color for any reason, it will check for cancel. I added a phony submit button to force the user to do it.
$('#color-picker').on('blur', function() {
if ($(this).data("prevColor") == $(this).val()) {
console.log('cancelled');
} else {
//value changed
}
updateData.bind(this)();
});
function updateData() {
$(this).data("prevColor", $(this).val());
}
updateData.bind($("#color-picker"))();
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<input id='color-picker' type=color value='#ff0000'><button>Submit</button>
I've used this for the Cancel and Close Events.
var prevColor;
$('#color-picker').onchange = function(){
if (this.value != prevColor){
prevColor = this.value;
}
};
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<input id='color-picker' type=color value='#ff0000'><button>Submit</button>
I am trying to make a "composed component" which consists of an input field and a button.
I have the following jsfiddle as example:
http://jsfiddle.net/stt0waj0/
<div id="myComponent">
<input type="text" onBlur="this.style.border='1px solid red';">
<button type="button" onClick="alert('Hello World');">ClickMe</button>
</div>
The behavior I want is that when I leave the input field without writing any content, I get a validation error (red border in this case). This already works in the fiddle (content validation is not the scope of the question).
However, when I leave the input field by pressing the button, I will open a dialog which allows to select values for the input field, so in that case, I don't want the validation to run.
So, the concrete question about the fiddle: Can I click the input field, and then click the button and not have a red border? But, if I click the input field, and then click somewhere else, I want the red border (any onBlur except when button was clicked).
Is this possible without dirty tricks?
Things I want to avoid:
Set a timer on the first event to wait for the second (Reason: performance)
Make the onClick event always reset the red border on the text field (Reason: gui glitches)
Just to make it clear on what I'm looking for and why this question is interesting: the onBlur event is fired before the onClick event. However, I normally would need the onBlur to know that the onClick comes next, which is not possible. That's the point of the question.
Imagine a date picker which validates on empty field, when the field has focus and you press the calendar, you will get a validation error even though you're selecting a date. I want to know if there is an elegant way to handle such cases.
To make this work, you can postpone your validation function if user pressed the button.
Below is sample code and fiddle to show what i mean.
* Updated the fiddle to use select dropdown instead of a button *
Fiddle Demo
input.error {color: red; border: 1px solid red;}
<div id="myComponent">
<input id="btn" type="text" onBlur="inputBlur()">
<select type="button" data-btn="btn" onclick="inputButtonClick()" onchange="selectChange()" onblur="selectBlur()">
<option value="">choose</option>
<option value="item1">item1</option>
<option value="item2">item2</option>
<option value="item3">item3</option>
</select>
</div>
window.validate = function(input) {
//do your validation
var val;
console.log("Validating");
val = input.val();
if ( !val || !val.length) {
input.addClass("error");
console.log("Something is invalid");
} else {
//all good
console.log("All valid");
}
//clear error after x time to retry
setTimeout(function() {
$(".error").removeClass("error");
$("input").removeAttr("data-btn-active") ;
}, 3000);
}
window.selectBlur = function() {
var input = $("#" + $(event.target).attr("data-btn"));
validate(input);
}
window.selectChange = function() {
var input = $("#" + $(event.target).attr("data-btn"));
console.log("change", $(event.target).val() );
input.val( $(event.target).val() );
validate(input);
}
window.inputButtonClick = function() {
var input = $("#" + $(event.target).attr("data-btn"));
input.attr("data-btn-active", "true");
console.log("inputButtonClick",input );
}
window.inputBlur = function() {
var input = $(event.target);
//give a bit of time for user to click on the button
setTimeout(function() {
if (!input.attr("data-btn-active" ) ) {validate(input);}
}, 100);
}
$(document).ready(function() {
});
I have this question. I have a input type text and a button. Like this html:
<form id="browser-form">
<div class="filebrowser">
<input type="text" id="browser-filepath">
</div>
<div class="upload submit">
Uploaden
</div>
</form>
But the question is. When the input type is empty. Je can not click on the button. When the input type is fil. Than you can click on the button. How can i fix that?
Thanks!
Assuming I've understood your question correctly, I think you want to prevent the link from doing anything unless the input has a value. If that's correct, then you can do this:
$("#browser-submit").click(function(e) {
if(!$("#browser-filepath").val()) {
e.preventDefault();
}
});
preventDefault is a method of the event object which, as the name suggests, prevents the default action of an event (in this case, following the link).
Here's a working example of the above.
function UpdateSubmitButton() {
var oTextBox = document.getElementById("browser-filepath");
var oButton = document.getElementById("browser-submit");
if(oTextBox.value == "") {
oButton.disabled = true;
}
else {
oButton.disabled = false;
}
}
Add an onchange="UpdateSubmitButton()" section to your text box, and you might want to add onload="UpdateSubmitButton()" to your document body.
This should do the trick.
I want to call a function when a certain field gets blurred, but only if a certain element is clicked. I tried
$('form').click(function() {
$('.field').blur(function() {
//stuff
});
});
and
$('.field').blur(function() {
$('form').click(function() {
//stuff
});
});
But neither works, I reckon it's because the events happen simultaneously?
HTML
<form>
<input class="field" type="textarea" />
<input class="field" type="textarea" />
</form>
<div class="click-me-class" id="click-me">Click Me</div>
<div class="click-me-class">Click Me Class</div>
jQuery
$('.field').blur(function() {
$('#click-me').click(function(e) {
foo = $(this).data('events').click;
if(foo.length <= 1) {
// Place code here
console.log("Hello");
}
$(this).unbind(e);
});
});
You can test it out here: http://jsfiddle.net/WfPEW/7/
In most browsers, you can use document.activeElement to achieve this:
$('.field').blur(function(){
if ($(document.activeElement).closest('form').length) {
// an element in your form now has focus
}
});
I have edited my answer because we have to take into account that the event is asigned every time.
It is not 100% satisfactory, and I don't recommend this kind of complicated way of doing things, but it is the more approximate.
You have to use a global variable to take into account the fact that the field was blurred. In the window event, it is automatically reset to 0, but if the click on "click-me" is produced, it is verified before the window event, becase window event is bubbled later, it happens inmediately after the "click-me" click event
Working code
$(window).click(function(e)
{
$("#result").html($("#result").html()+" isBlurred=0<br/>");
isBlurred=0;
});
var isBlurred=0;
$('.field').blur(function() {
$("#result").html($("#result").html()+" isBlurred=1<br/>");
isBlurred=1;
});
$('#click-me').click(function(e) {
if(isBlurred==1)
{
$("#result").html($("#result").html()+" clicked<br/>");
}
});
".field" would be the input and "#click-me" would be the element clicked only just once.