We Keep Coding

JS image resize compatible with fullPage.js

I am trying to integrate this code : http://codepen.io/babybackart/pen/GZPjJd on a section of a website using fullpage.js.
This code is based on a previous question brilliantly answered by #Seika85 : Make a .div act like an image.
The aim was to "contain" and resize the image on its container ".plancheBox" without cuting it.
In this example, the cat picture's dimensions are driven by the container using this first javascript code:
var calculateImageDimension = function() {
$('.plancheBox img').each(function() {
var $img = $(this),
$plancheBox = $img.closest('.plancheBox');
$img.css({
'max-height': $plancheBox.height() + 2,
/* (+2px) prevent thin margins due to rendering */
'max-width': $plancheBox.width()
});
$img.closest('.container').css({
'position': 'relative'
});
});
}
calculateImageDimension();
In order to set these dimensions instantaneously (without a page refresh), I am using this second javascript code:
var resizeEnd;
$(window).on('resize', function() {
clearTimeout(resizeEnd);
resizeEnd = setTimeout(function() {
$(window).trigger('resize-end');
}, 200);
});
$(window).on('resize-end', function() {
$('.plancheBox img').css({
'max-height': 'none',
'max-width': 'none'
})
$('.plancheBox .container').css({
'position': ''
});
calculateImageDimension();
});
As you can see in the first example, it works without fullpage.js.
I managed to insert the first JS code in a fullpage.js website : http://codepen.io/babybackart/pen/ONrbEN but I don't really manage to insert the second one.
I'm not actually a JS coder so I wanted to know what I needed to do to insert this code, if it was possible to do this with fullpage.js and if there were any conflict between both codes.
Thank you for your answer !

The second JS code must be inserted in a fullPage event like this:
$(document).ready(function() {
$('#fullpage').fullpage({
//events
afterResize: function(){
$('.plancheBox img').css({
'max-height' : 'none',
'max-width' : 'none'
})
$('.plancheBox .conteneur').css({'position' : ''});
calculateImageDimension();
}
});
});

Animate tooltip on user hover with jQuery

Im trying to make my tooltip bounce onmouse hover,
I have the following that works with sporadic results, as in the the tooltip bounces fast for 3 seconrds ro so, then slow for 3 seconds etc... I also need to stop this function on mouseout, Can somebody see where im going wrong to get the variation in bounce speed?
// Tooltip title
$('.male').mouseover(function(e) {
var tiptitle = $(this).find('.highlight');
setInterval(function(){
tiptitle.animate({top:'-85px'}, 100, function() {
tiptitle.animate({top:'-75px'}, 100);
});
},200);
}).mouseout(function() {
});

if you choose to go the route of the effects plugin bounce effect use this code , then use stop() on mouseout
$('.male').mouseover(function(e) {
var tiptitle = $(this).find('.highlight');
tiptitle.effect("bounce", { times:3 }, 300);
}).mouseout(function() {
$(this).find('.highlight').stop();
});
otherwise , I believe you are getting sporadic speeds of bounce because of -85px and -75px both at 100

Issue with jquery fadein

I have a piece of code here which it works but not sure why my fadein and fadeout doesn't work for the body,
If you think what the issue i'm having please let me know thanks
<script type="text/javascript">
$(window).load(function() {
var lastSlide = "";
$('#slider').nivoSlider({
effect: 'random',
directionNavHide : true,
slices : 15,
animSpeed : 500,
pauseTime : 6000,
controlNav : false,
pauseOnHover : true,
directionNav:true, //Next & Prev
directionNavHide:true, //Only show on hover
beforeChange: function(){
if(lastSlide == "images/header_used.jpg") { //use the bg image of the slide that comes before the newslide
$("body").attr("style","background: #000 url(images/bg.jpg) top center no-repeat;").fadeIn("slow");
} else {
$("body").attr("style","background: #ADADAD url(images/bgnd_grad.jpg) repeat-x;").fadeOut("slow");
}
},
afterChange: function() {
t = $(this).children("a:visible");
lastSlide = $("img", t).attr("src");
}
});
});
</script>

While it may solve your mission with the body background. i would instead have used addClass and removeClass. You are manipulating the style attribute which also show/hide uses it.
I have no way to test it but what happens if you switch the fades to show() and hide(), just to determine if delay is a factor.. :)

It my come by the fact that "lastSlide" variable could store multiple object (the one from img and the one from visible link).
t = $(this).children("a:visible");
lastSlide = $("img", t).attr("src"); //could store multiple source.
This make comparation a little bit tricker and could create bug.
Plus the fact that you use the worst way to style your body. As other says, use class or .css jQuery function (http://api.jquery.com/css/).
Hope this help

fadein and fadeout work for body,absolutely.
as Reflective said, it should be
$("body").css("background","#000 url(images/bg.jpg) top center no-repeat;").fadeOut("slow")
if still doesn't work, you may should look into your nivoSlider function

Todays Special: How is this done? Is there a jquery plugin or product to do it?

I saw this technique at the bottom of a web page where the TAB stays in place at the bottom of the page and can be opened and closed to display more info. I assume it can be rotated to display a different special for different days. Can you point me to anything like it or explain the technique ? thanks. Here is a sample: http://www.tmdhosting.com/ look at the bottom of the page .

position: fixed is how you manage to keep something at the bottom or top of the page, regardless of scrolling.
This is easily discoverable using firebug's (http://getfirebug.com/) inspect element feature

You can check out my version of this at uxspoke.com
I wrote a jQuery plugin to do it, and calling it is straightforward:
$('#about').pulloutPanel({open:true}).
click(function() { $(this).trigger('toggle'); }) });
I basically instrument the panel to support "open", "close" events, and the implement the appropriate animations around them. The only "hard" part is getting the height right. It also supports "toggle" so you can add a generic click handler to it to open or close it. Finally, it uses opened/closed classes to keep track of its current state. That's it!
The code's pretty coupled to the technologies on the page (Csster) and the design it is in, so I'm not sure it will work for you. You can either use Csster, or just put the CSS rules into your stylesheet and remove them from the code. The important Css attributes are the positioning and bottom.
Here it is:
$.fn.pulloutPanel = function(options) {
var settings = $.extend({}, {
attachTo: 'bottom',
css: {
left: 0,
minHeight: 390,
border: '1px 1px 1px 0 solid #666',
has: [roundedCorners('tr', 10),boxShadow([0,0], 10, phaseToColor('requirements').saturate(-30).darken(50))],
cursor: 'pointer'
}, options);
return $(this).each(function() {
var $this = $(this);
$this.addClass('pullout_panel');
$this.bind('open', function(event) {
$this.animate({bottom: 0}, 'slow', 'easeOutBounce', function() {
$this.removeClass('closed').addClass('opened');
$this.trigger('opened');
});
});
$this.bind('close', function(event) {
var height = $this.innerHeight();
$this.animate({bottom: -height + 50}, 'slow', 'easeOutBounce', function() {
$this.addClass('closed').removeClass('opened');
$this.trigger('closed');
});
});
$this.bind('toggle', function(event) {
$this.trigger($this.hasClass('opened') ? 'close' : 'open');
});
once(function() {
Csster.style({
'.pullout_panel': {
position: 'fixed',
bottom: 0,
has: [settings.css]
}
});
});
$this.trigger(settings.open ? 'open' : 'close');
});
};

Shade entire page, unshade selected elements on hover

I'm trying to make a page inspection tool, where:
The whole page is shaded
Hovered elements are unshaded.
Unlike a lightbox type app (which is similar), the hovered items should remain in place and (ideally) not be duplicated.
Originally, looking at the image lightbox implementations, I thought of appending an overlay to the document, then raising the z-index of elements upon hover. However this technique does not work in this case, as the overlay blocks additional mouse hovers:
$(function() {
window.alert('started');
$('<div id="overlay" />').hide().appendTo('body').fadeIn('slow');
$("p").hover(
function () {
$(this).css( {"z-index":5} );
},
function () {
$(this).css( {"z-index":0} );
}
);
Alternatively, JQueryTools has an 'expose' and 'mask' tool, which I have tried with the code below:
$(function() {
$("a").click(function() {
alert("Hello world!");
});
// Mask whole page
$(document).mask("#222");
// Mask and expose on however / unhover
$("p").hover(
function () {
$(this).expose();
},
function () {
$(this).mask();
}
);
});
Hovering does not work unless I disable the initial page masking. Any thoughts of how best to achieve this, with plain JQuery, JQuery tools expose, or some other technique? Thankyou!

What you can do is make a copy of the element and insert it back into the DOM outside of your overlay (with a higher z-index). You'll need to calculate its position to do so, but that's not too difficult.
Here is a working example.
In writing this I re-learned the fact that something with zero opacity cannot trigger an event. Therefore you can't use .fade(), you have to specifically set the opacity to a non-zero but very small number.
$(document).ready(function() { init() })
function init() {
$('.overlay').show()
$('.available').each(function() {
var newDiv = $('<div>').appendTo('body');
var myPos = $(this).position()
newDiv.addClass('available')
newDiv.addClass('peek')
newDiv.addClass('demoBorder')
newDiv.css('top',myPos.top+'px')
newDiv.css('left',myPos.left+'px')
newDiv.css('height',$(this).height()+'px')
newDiv.css('width',$(this).width()+'px')
newDiv.hover(function()
{newDiv.addClass('full');newDiv.stop();newDiv.fadeTo('fast',.9)},function()
{newDiv.removeClass('full');newDiv.fadeTo('fast',.1)})
})
}

Sorry for the prototype syntax, but this might give you a good idea.
function overlay() {
var div = document.createElement('div');
div.setStyle({
position: "absolute",
left: "0px",
right: "0px",
top: "0px",
bottom: "0px",
backgroundColor: "#000000",
opacity: "0.2",
zIndex: "20"
})
div.setAttribute('id','over');
$('body').insert(div);
}
$(document).observe('mousemove', function(e) {
var left = e.clientX,
top = e.clientY,
ele = document.elementFromPoint(left,top);
//from here you can create that empty div and insert this element in there
})
overlay();