I'm new to qunit (one day) and still learning..
I would like to save the message and stacktrace from an exception. I'm not sure how to do that.
In the code below, copies of stacktrace and message are places in the variables. I'm assuming the scope is different.
QUnit.test("Internal scheme validator - destination list - empty - no strict", function(assert) {
var path ='[{"sid":"test_scheme0","ssch":"","dstli":""}]';
var pathi = JSON.parse(path);
var expected = 'undefined scheme destination list';
var err;
var enm;
var emsg;
var estk;
assert.throws(
function(){
"use strict";
sysCatalog.__vschi__(pathi,"SchemeTest Ignore Message" );
},
function(e){
err= JSON.parse(JSON.stringify(e));
enm= JSON.parse(JSON.stringify(e.name));
emsg = JSON.parse(JSON.stringify(e.message));
estk = JSON.parse(JSON.stringify(e.stack));
return emsg === expected;
},
'Wrong exception message returned.\nExpected: '+ expected+'\nActual: '+ emsg +'\nBacktrace:\n'+estk
);
});
It depends on how you want to save your results. If you want to output the errors and stacktraces to a file then you can use the fs api in node to save your results to a nicely formatted file.
fs.writeFile(...);
Additionally there is a module that integrates with qunit and node that lets you output your results to an XML file.
It took a little bit of rethinking.. The quinit exception mechanism is a bit rudimentary for my needs.. This is the solution I reverted to, which is the test code started with before moving to qunit.
There is one drawback, qunit will dump the backtrace if:
QUnit.config.notrycatch = true;
QUnit.test("Internal scheme validator - destination list - empty - strict", function(assert) {
var path ='[{"sid":"test_scheme0","ssch":"","dstli":""}]';
var pathi = JSON.parse(path);
var expected = 'zero length scheme destination list';
var enm;
var emsg;
var estk;
try{
sysCatalog.__vschi__(pathi,"SchemeTest Ignore Message",true );
}catch(e){
// here the test failed and we should not proceed
//cc=false;
enm= e.name;
emsg = e.message;
estk = e.stack;
}
assert.strictEqual(emsg,expected, 'Wrong exception message returned.\nBacktrace:\n'+estk);
});
Related
I am working on Protractor for testing the Angular JS application. I have written a code to read the data from excel sheet.My scenario is like I have a end to end flow that should execute.The code will take the URL,UserName and Password from the excel sheet and will execute the entire flow. Than again it will iterate the other value. But its not going into the loop.
My code is:
var Excel = require('exceljs');
var XLSX = require('xlsx');
var os = require('os');
var TEMP_DIR = os.tmpdir();
var wrkbook = new Excel.Workbook();
//---------------------Duration as Days------------------------------------------
describe('Open the clinicare website by logging into the site', function () {
it('IP Medication Simple flows for Patient Keerthi for Days,Weeks and Months', function () {
console.log("hello6");
browser.driver.manage().window().maximize();
var wb = XLSX.readFile('E:\\LAM WAH EE_Testing Enviornment\\IP_Medication_Flow\\Patients_Entry.xlsx');
var ws = wb.Sheets.Sheet1;
var json = XLSX.utils.sheet_to_json(wb.Sheets.Sheet1);
console.log("json", json);
//var json = XLSX.utils.sheet_to_json(wb.Sheets.Sheet1);
//console.log("json", json);
for(var a = 0; a < json.length ; a++){
console.log("Test_URL", json[a].Test_URL);
console.log("User_Name", json[a].User_Name);
console.log("Password", json[a].Password);
browser.get(json[a].Test_URL);
console.log("hello10");
//Perform Login:UserName
element(by.model('accessCode')).sendKeys(json[a].User_Name);
browser.sleep(6000);
// browser.driver.sleep(6000);
//Perform Login:Password
element(by.model('password')).sendKeys(json[a].Password);
browser.sleep(6000);
//Hospital Name
element(by.cssContainingText('option', 'HLWE')).click();
browser.sleep(6000);
//Perform Login:LoginButton
element(by.css('.btn.btn-primary.pull-right')).click();
browser.sleep(6000);
//Clicking on Admitted Tab
element(by.xpath("//span[contains(text(),' Admitted(25)')]")).click();
browser.sleep(6000);
// browser.driver.sleep(6000);
//Clicking on First Admitted Patient
element(by.cssContainingText('span.clearfloat', '35690')).element(by.xpath('//*[#id="searchPatientImgAdmittedF"]')).click();
jasmine.DEFAULT_TIMEOUT_INTERVAL = 600000;
// browser.sleep(600);
//Clicking anywhere to proceed
element(by.xpath('/html/body/div[3]/div[1]/div[16]/div[1]/div/table[4]/tbody/tr[2]/td/div/div/div[3]/table/tbody/tr[1]/td[3]')).click();
jasmine.DEFAULT_TIMEOUT_INTERVAL = 10000;
browser.sleep(800);
Anyone's help is appreciated. Thanks in advance.
Alright initially confused with the 'exceljs' node module. It is not used in your test. I think the major problem here is that the file does not exist.
readFile and ENOENT
The first thing of the readFile is an alias for readFileSync which calls readSync which calls (probably) read_binary which offloads to node's fs.readFileSync. More than likely the fs.readFileSync is throwing the ENOENT because the path does not exist.
Looking at your path, you might need a backslash before your spaces.
var wb = XLSX.readFile('E:\\LAM\ WAH\ EE_Testing Enviornment\\IP_Medication_Flow\\Patients_Entry.xlsx');
It could be a good practice to get the file path with path.resolve prior to calling the read file method.
var path = require('path');
var patientEntryFilePath = path.resolve('E:\\LAM\ WAH\ EE_Testing Enviornment\\IP_Medication_Flow\\Patients_Entry.xlsx');
console.log(patientEntryFilePath);
var wb = XLSX.readFile(patientEntryFilePath);
Additional comments and thoughts about the original code snippet
Some additional comments about the code snippet from the original question. Maybe considerations for future cleanup.
Think about using a beforeAll or beforeEach for setting your browser driver window size and reading in a file. Reading in the file once is potentially a time and resource saver.
describe('Open the clinicare website by logging into the site', function () {
var json = null;
beforeAll(() => {
browser.driver.manage().window().maximize();
var wb = XLSX.readFile('E:\\LAM\ WAH\ EE_Testing Enviornment\\IP_Medication_Flow\\Patients_Entry.xlsx');
var ws = wb.Sheets.Sheet1;
json = XLSX.utils.sheet_to_json(wb.Sheets.Sheet1);
});
it('IP Medication Simple flows for Patient Keerthi for Days,Weeks and Months', function () {
console.log("json", json);
...
Looking at your test that it is a login and it appears to have the same flow, you really only need to test this once. The for loop is acceptable since the json file is resolved and each line is executed in the control flow that Protractor uses.
Avoid using xpath. It is better to find elements by css or id or partial path. In the developer adds an additional div in the list of div's will break your test, making your test more fragile and require more upkeep.
This because Protractor API execute Async, but the For loop execute Sync. Get detail explain from here, which is same issue as yours.
To fix your issue, we can use javascript closure.
for(var a = 0; a < json.length ; a++) {
(function(a){
console.log("Test_URL", json[a].Test_URL);
console.log("User_Name", json[a].User_Name);
console.log("Password", json[a].Password);
browser.get(json[a].Test_URL);
console.log("hello10");
//Perform Login:UserName
element(by.model('accessCode')).sendKeys(json[a].User_Name);
browser.sleep(6000);
// browser.driver.sleep(6000);
//Perform Login:Password
element(by.model('password')).sendKeys(json[a].Password);
browser.sleep(6000);
...
})(a)
}
If I execute a certain shell command in node js, the output is on the console. Is there a way I can save it in a variable so it can be POST to Sqlite database.
const shell = require('shelljs');
shell.exec('arp -a');
In this scenario, I want to store the IP address of a specific MAC/Physical address into the database. How can this be done?
Any help would be much appreciated. Thank you
You need to get the output of the command you're passing to exec. To do that, just call stdout, like this:
const shell = require('shelljs');
const stdout = shell.exec('arp -a').stdout;
Then just parse that output to get your ipaddress:
const entries = stdout.split('\r\n');
// entries sample
[ '',
'Interface: 10.17.60.53 --- 0xd',
' Internet Address Physical Address Type',
' 10.11.10.52 6c-4b-90-1d-97-b8 dynamic ',
' 10.10.11.254 xx-yy-53-2e-98-44 dynamic ']
Then you can filter your wanted address with some more manipulation.
EDIT:
To get the ip address, you could do:
let ipAddr = null;
for (let i = 0; i < entries.length; i++) {
if (entries[i].indexOf('6c-4b-90-1d-97-b8') > -1) {
ipAddr = entries[i].match(/\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b/)[0];
break;
}
}
console.log(ipAddr); // '10.11.10.52'
I'm merely copy pasting from the docs. You should research more.
You need to add a listener to stdout
var child = exec('arp -a', {async:true});
child.stdout.on('data', function(data) {
/* ... do something with data ... */
});
Or adding the callback directly when calling exec
exec('some_long_running_process', function(code, stdout, stderr) {
console.log('Exit code:', code);
console.log('Program output:', stdout);
console.log('Program stderr:', stderr);
});
You can access the result of the command run using shell.exec with the .output property. Try the code below.
var shell = require('shelljs');
var result = shell.exec('arp -a').output;
If you don't want the result in the console, you can specify the silent option.
var result = shell.exec('arp -a', {silent: true}).output;
Now, you can use regular expressions to extract ip and mac address from the result.
I am getting the result of the command like below:
? (xxx.xxx.xxx.xxx) at xx:xx:xx:xx:xx:xx [ether] on eth0
? (yyy.yyy.yyy.yyy) at yy:yy:yy:yy:yy:yy [ether] on eth0
You can use the following code to extract ip and mac.
var res = result.split("\n").map(function(item){
return item.match(/\((\d+\.\d+\.\d+\.\d+)\) at (..:..:..:..:..:..)/);
});
console.log(res[0][1]); //IP of first interface
console.log(res[0][2]); //MAC of first interface
console.log(res[1][1]); //IP of second interface
console.log(res[1][2]); //MAC of second interface
NOTE
I was not able to find the .output property in the documentation but trying the shell.exec function in the node console revealed it.
The .stdout property or the exec function mentioned in other answers doesn't work for me. They are giving undefined errors.
I'm trying to use mock-cli to stub process.arv in mocha tests for a cli app. I want to test that a message is console.logged when an incorrect argument ("imit") is passed to process.argv (as defined by commands).
I'm trying to adapt the example from the documentation but i don't think i have set everything up correctly.
it passes when i comment out "stdin: require('../mocks/fakeInputStream'), // Hook up a fake input stream" though i know it's not working correctly
it fails with TypeError: sourceStream.on is not a function when run as described below
Can someone see what I'm missing?
/index.js
var commands = ['init'];
function getGitHeadArgs() {
return process.argv.slice(2, process.argv.length);
}
if (getGitHeadArgs().length) {
if (!commands.includes(getGitHeadArgs()[0])) {
console.log("Silly Githead! That's not a githead command");
}
eval(getGitHeadArgs()[0])();
} else {
console.log("You didn't tell githead to do anything!");
}
/testIndex.js
var assert = require('assert');
var index = require('../index.js');
var mockCli = require("mock-cli");
describe("incorrect argument", function() {
it("imit throws an error if an invalid command is raised", function() {
var argv = ['node', '../index.js', 'imit']; // Fake argv
var stdio = {
stdin: require('../mocks/fakeInputStream'), // Hook up a fake input stream
stdout: process.stdout, // Display the captured output in the main console
stderr: process.stderr // Display the captured error output in the main console
};
var kill = mockCli(argv, stdio, function onProcessComplete(error, result) {
var exitCode = result.code; // Process exit code
var stdout = result.stdout; // UTF-8 string contents of process.stdout
var stderr = result.stderr; // UTF-8 string contents of process.stderr
assert.equal(exitCode, 0);
assert.equal(stdout, "Silly Githead! That's not a githead command\n");
assert.equal(stderr, '');
});
// Execute the CLI task
require('../index.js');
// Kill the task if still running after one second
setTimeout(kill, 1000);
});
Is ../mocks/fakeInputStream a valid path?
Is the object at ../mocks/fakeInputStream a valid instance of ReadableStream?
The source code is avalible at GitHub.
Make sure you meet the requirements for the captureStdin(sourceStream, callback) function.
The module uses that function to capture your fakeInputStream and pipe it into a captureStream.
I am followint that article https://nodejs.org/api/console.html how to write output to the file
var output = fs.createWriteStream('./stdout.log');
var errorOutput = fs.createWriteStream('./stderr.log');
var logger = new Console(output, errorOutput);
logger.log('log my stuff to the file');
but I cant see anything being written to the file. Why?
I can see just empty files 0 bytes.
I just found some mystery in my code.
When I am commenting that code bwlow then the logger is working, but when I am uncommenting that code the logger is not working:
var exec = require('child_process').exec, child;
child = exec(cmd,
function (error, stdout, stderr) {
console.log(cmd);
if (error !== null) {
console.log(error);
}
})
I do not have any issues/errors withe a code it is all working. But loggin is not working whem I am calling child = exec...
The documentation on Console is saying:
The global console is a special Console whose output is sent to
process.stdout and process.stderr
So in my case wne I am running child = exec... it is running another proess so may be it is breaking Console.Log() ... Any thoughts?
The complete script should be this:
var Console = require('console').Console,
fs = require('fs'),
output = fs.createWriteStream('./stdout.log'),
errorOutput = fs.createWriteStream('./stderr.log'),
logger = new Console(output, errorOutput);
logger.log('log my stuff to the file');
When working in Python I always have this simple utility function which returns the file name and line number from where the function is called:
from inspect import getframeinfo, stack
def d():
""" d stands for Debug. It returns the file name and line number from where this function is called."""
caller = getframeinfo(stack()[1][0])
return "%s:%d -" % (caller.filename, caller.lineno)
So in my code I simply put a couple debug lines like this to see how far we get before some error occurs:
print d()
# Some buggy code here
print d()
# More buggy code here
print d(), 'here is the result of some var: ', someVar
This works really well for me because it really helps debugging quickly.
I'm now looking for the equivalent in a node backend script. I was searching around but I can't find anything useful (maybe I'm looking for the wrong words?).
Does anybody know how I can create a Javascript/nodejs function which outputs the file name and line number from where the function is called? All tips are welcome!
You can create an Error to get where the Error is, and its stack trace. Then you can put that into a function, to get the line where it is.
function thisLine() {
const e = new Error();
const regex = /\((.*):(\d+):(\d+)\)$/
const match = regex.exec(e.stack.split("\n")[2]);
return {
filepath: match[1],
line: match[2],
column: match[3]
};
}
console.log(thisLine());
This works for me in Google Chrome.
And also in node.
Note to #j08691's comment:
Both this and this seem to be using lineNumber, which is not present (as far as I could test) in NodeJS.
Printing line number with custom string
const moment = require('moment');
const log = console.log;
const path = require('path');
function getTime(time) { return moment().format('YYYY-MM-DD HH:mm:ss') };
function line(num = 2) {
const e = new Error();
const regex = /\((.*):(\d+):(\d+)\)$/
const match = regex.exec(e.stack.split("\n")[num]);
const filepath = match[1];
const fileName = path.basename(filepath);
const line = match[2];
const column = match[3];
return {
filepath,
fileName,
line,
column,
str: `${getTime()} - ${fileName}:${line}:${column}`
};
}
log(line().str, "mylog1");
log(line().str, "mylog2");
log(line().str, "mylog3");
OUTPUT
2021-11-22 13:07:15 - test.js:44:5 mylog1
2021-11-22 13:07:15 - test.js:45:5 mylog2
2021-11-22 13:07:15 - test.js:46:5 mylog3
You can use this gulp plugin gulp-log-line . It Logs file and line number without the extra cost of reading the stack.
you just have to install gulp and gulp-log-line using the
npm install gulp --save and npm install gulp-log-line command. after that you need to create and write the below code in gulpfile.js and run
gulp log-line to create a duplicate file in the build folder :-
var gulp = require('gulp');
var logLine = require('gulp-log-line');
gulp.task('line-log', function() {
return gulp.src("file.js", {buffer : true})
//Write here the loggers you use.
.pipe(logLine(['console.log', 'winston.info']))
.pipe(gulp.dest('./build'))
})
gulp.task('default', ['line-log'])
Example
file.js :-
console.log('First log')
var someVariable
console.log('Second log')
Becomes
console.log('file.js:1', 'First log')
var someVariable
console.log('file.js:3', 'Second log')
The only way I've found to get anything relating to line numbers is to trap the window.onerror function, and when there's an error that will get passed the error message, the file URL and the line number:
window.onerror = function(msg, url, line) {
alert(msg + "\n" + url + ":" + line);
};
This works for me on Chrome - I don't know about other browsers.
EDIT when this answer was given in Feb' 15 there was no mention of NodeJS in the question. That was only added in November '17.