Possible Duplicate:
Which keycode for escape key with jQuery
How to detect escape key press in IE, Firefox and Chrome?
Below code works in IE and alerts 27, but in Firefox it alerts 0
$('body').keypress(function(e){
alert(e.which);
if(e.which == 27){
// Close my modal window
}
});
Note: keyCode is becoming deprecated, use key instead.
function keyPress (e) {
if(e.key === "Escape") {
// write your logic here.
}
}
Code Snippet:
var msg = document.getElementById('state-msg');
document.body.addEventListener('keypress', function(e) {
if (e.key == "Escape") {
msg.textContent += 'Escape pressed:'
}
});
Press ESC key <span id="state-msg"></span>
keyCode is becoming deprecated
It seems keydown and keyup work, even though keypress may not
$(document).keyup(function(e) {
if (e.key === "Escape") { // escape key maps to keycode `27`
// <DO YOUR WORK HERE>
}
});
Which keycode for escape key with jQuery
The keydown event will work fine for Escape and has the benefit of allowing you to use keyCode in all browsers. Also, you need to attach the listener to document rather than the body.
Update May 2016
keyCode is now in the process of being deprecated and most modern browsers offer the key property now, although you'll still need a fallback for decent browser support for now (at time of writing the current releases of Chrome and Safari don't support it).
Update September 2018
evt.key is now supported by all modern browsers.
document.onkeydown = function(evt) {
evt = evt || window.event;
var isEscape = false;
if ("key" in evt) {
isEscape = (evt.key === "Escape" || evt.key === "Esc");
} else {
isEscape = (evt.keyCode === 27);
}
if (isEscape) {
alert("Escape");
}
};
Click me then press the Escape key
Using JavaScript you can do check working jsfiddle
document.onkeydown = function(evt) {
evt = evt || window.event;
if (evt.keyCode == 27) {
alert('Esc key pressed.');
}
};
Using jQuery you can do check working jsfiddle
jQuery(document).on('keyup',function(evt) {
if (evt.keyCode == 27) {
alert('Esc key pressed.');
}
});
check for keyCode && which & keyup || keydown
$(document).keydown(function(e){
var code = e.keyCode || e.which;
alert(code);
});
Pure JS
you can attach a listener to keyUp event for the document.
Also, if you want to make sure, any other key is not pressed along with Esc key, you can use values of ctrlKey, altKey, and shifkey.
document.addEventListener('keydown', (event) => {
if (event.key === 'Escape') {
//if esc key was not pressed in combination with ctrl or alt or shift
const isNotCombinedKey = !(event.ctrlKey || event.altKey || event.shiftKey);
if (isNotCombinedKey) {
console.log('Escape key was pressed with out any group keys')
}
}
});
pure JS (no JQuery)
document.addEventListener('keydown', function(e) {
if(e.keyCode == 27){
//add your code here
}
});
Below is the code that not only disables the ESC key but also checks the condition where it is pressed and depending on the situation, it will do the action or not.
In this example,
e.preventDefault();
will disable the ESC key-press action.
You may do anything like to hide a div with this:
document.getElementById('myDivId').style.display = 'none';
Where the ESC key pressed is also taken into consideration:
(e.target.nodeName=='BODY')
You may remove this if condition part if you like to apply to this to all. Or you may target INPUT here to only apply this action when the cursor is in input box.
window.addEventListener('keydown', function(e){
if((e.key=='Escape'||e.key=='Esc'||e.keyCode==27) && (e.target.nodeName=='BODY')){
e.preventDefault();
return false;
}
}, true);
Best way is to make function for this
FUNCTION:
$.fn.escape = function (callback) {
return this.each(function () {
$(document).on("keydown", this, function (e) {
var keycode = ((typeof e.keyCode !='undefined' && e.keyCode) ? e.keyCode : e.which);
if (keycode === 27) {
callback.call(this, e);
};
});
});
};
EXAMPLE:
$("#my-div").escape(function () {
alert('Escape!');
})
On Firefox 78 use this ("keypress" doesn't work for Escape key):
function keyPress (e)(){
if (e.key == "Escape"){
//do something here
}
document.addEventListener("keyup", keyPress);
i think the simplest way is vanilla javascript:
document.onkeyup = function(event) {
if (event.keyCode === 27){
//do something here
}
}
Updated: Changed key => keyCode
I need to capture normal text with upper and lower case letters, but I also want to pick up the key codes for alt, ctrl, esc, etc. I have attempted to run the two jquery functions .keypress and .keydown, and only accept special keys from .keydown, but when they are together, they only give to result of one. I am using Chrome, but I also need support for as many other browsers as possible.
You can fetch the state of special keys using jQuery.Event which is the first argument of the callback from a listener:
http://jsbin.com/epuqig/2/embed?live
jQuery(function($) {
$('input').on('keydown', function(event) {
// event.shiftKey
// event.ctrlKey
// Also to fetch the keyCode use:
// event.which
if ( event.which == 8 && event.shiftKey ) {
// Backspace and shift key is pressed
}
});
});
You can go vanilla if you don't care about old browsers:
window.addEventListener('load', function() {
var inputs = document.querySelectorAll('input');
[].forEach.call(inputs, function(input) {
input.addEventListener('keydown', keydownHandler, false);
});
}, false);
function keydownHandler(event) {
if ( event.keyCode == 8 && event.shiftKey ) {
// Backspace and shift key is pressed!
}
}
As you can see this is almost the same code snippets but the second one want work in < IE9
$(document).ready(function () {
$(document).keydown(function (e) {
var code = e.keyCode;
if(e.altKey) // you can also use - e.ctrlKey , e.shiftKey
// alt key
}).keyup(function (e) {
var code = e.keyCode;
});
});
I have a button in HTML and I want to provide a shortcut key to it, which should run the functionality as when button clicks what happens.
Is it possible to do something like this using JavaScript or jQuery.
You can do this using plain HTML: accesskey="x". Then you can use alt+x (depending on the browser though if it's alt or something else)
Untested:
$("body").keypress(function(event) {
if ( event.which == 13 ) { // put your own key code here
event.preventDefault();
$("#yourbutton").click();
}
});
It's pretty easy using jQuery. To trigger a button:
$('#my-button').trigger('click');
To monitor for keypress:
$(window).keypress(function (event) {
if (event.which === 13) { // key codes here: http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes
event.preventDefault();
$('#my-button').trigger('click');
}
});
Now, if you want to use the Ctrl key or similar you use
if (event.which === 13 && event.ctrlKey)
and similar with event.altKey, event.shiftKey.
$(document).on('keypress', function (e) {
if (e.keyCode === youreKeyCodeHere) {
// if (e.keyCode === youreKeyCodeHere && e.shiftKey === ture) { // shift + keyCode
// if (e.keyCode === youreKeyCodeHere && e.altKey === ture) { // alt + keyCode
// if (e.keyCode === youreKeyCodeHere && e.ctrlKey === ture) { // ctrl + keyCode
$('youreElement').trigger('click');
}
});
Where youreKeyCode can be any of the following javascript char codes , if you're shortcut needs an alt (shift, ctrl ...) use the commented if's . youreElement is the element that holds the click event you whant to fire up.
For whatever reason I can't capture "SHIFT+TAB" combination.
I am using the latest jQuery.
Same result if I use other ajax/javascript, etc.
Here is a simple example that should work as I currently understand it...
event.which or event.KeyCode are always "undefined" only shiftKey exists in a scenario involving a "SHIFT+TAB" or backward keyboard traversal, traditionally inherent in windows based apps/web or otherwise...
function ShiftTab()
{
debugger;
if(event.KeyCode == 9 && event.shiftKey) // neither this line nor the following work
// if (event.which == 9 && event.shiftKey) // shift + tab, traverse backwards, using keyboard
{
return true;
}
else
{
return false;
}
}
this seems to be yet another item related to tab order that no longer works as it traditionally worked in Microsoft.Net WinForm/WebForm based apps.
If you are using jQuery, this should be how the code is working. Make sure keyCode is lower case. Also, jQuery normalizes keyCode into which:
$(document).keyup(function (e) {
if (e.which === 9 && e.shiftKey) {
ShiftTab();
}
});
If you're into terse JavaScript:
$(document).keyup(function (e) {
e.which === 9 && e.shiftKey && ShiftTab();
});
jQuery 1.7+ on syntax:
$(document).on('keyup', function (e) {
e.which === 9 && e.shiftKey && ShiftTab();
});
I created a function which I wired up to my button's onkeydown event. I used onkeydown, because onkeypress would not capture my tab key press
function ShiftTab(evt) {
var e = event || evt; // for trans-browser compatibility
var charCode = e.which || e.keyCode; // for trans-browser compatibility
if (charCode === 9) {
if (e.shiftKey) {
$('#controlName').focus();
return false;
} else {
return true;
}
}
I took this approach to deal with two specific problems:
onkeypress would not capture tab key press
When click shift-tab, shift key press would trigger function, so I had nest the shiftkey modifier check
use same code inside keypress event.
the tab changes the element between keypress and keyup.
here we get event.key = tab and event.shiftKey = true.
How to detect Ctrl+V, Ctrl+C using JavaScript?
I need to restrict pasting in my textareas, end user should not copy and paste the content, user should only type text in textarea.
How can I achieve this?
I just did this out of interest. I agree it's not the right thing to do, but I think it should be the op's decision... Also the code could easily be extended to add functionality, rather than take it away (like a more advanced clipboard, or Ctrl+S triggering a server-side save).
$(document).ready(function() {
var ctrlDown = false,
ctrlKey = 17,
cmdKey = 91,
vKey = 86,
cKey = 67;
$(document).keydown(function(e) {
if (e.keyCode == ctrlKey || e.keyCode == cmdKey) ctrlDown = true;
}).keyup(function(e) {
if (e.keyCode == ctrlKey || e.keyCode == cmdKey) ctrlDown = false;
});
$(".no-copy-paste").keydown(function(e) {
if (ctrlDown && (e.keyCode == vKey || e.keyCode == cKey)) return false;
});
// Document Ctrl + C/V
$(document).keydown(function(e) {
if (ctrlDown && (e.keyCode == cKey)) console.log("Document catch Ctrl+C");
if (ctrlDown && (e.keyCode == vKey)) console.log("Document catch Ctrl+V");
});
});
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<h3>Ctrl+c Ctrl+v disabled</h3>
<textarea class="no-copy-paste"></textarea>
<br><br>
<h3>Ctrl+c Ctrl+v allowed</h3>
<textarea></textarea>
Also just to clarify, this script requires the jQuery library.
Codepen demo
EDIT: removed 3 redundant lines (involving e.which) thanks to Tim Down's suggestion (see comments)
EDIT: added support for Macs (CMD key instead of Ctrl)
With jquery you can easy detect copy, paste, etc by binding the function:
$("#textA").bind('copy', function() {
$('span').text('copy behaviour detected!')
});
$("#textA").bind('paste', function() {
$('span').text('paste behaviour detected!')
});
$("#textA").bind('cut', function() {
$('span').text('cut behaviour detected!')
});
More information here: http://www.mkyong.com/jquery/how-to-detect-copy-paste-and-cut-behavior-with-jquery/
While it can be annoying when used as an anti-piracy measure, I can see there might be some instances where it'd be legitimate, so:
function disableCopyPaste(elm) {
// Disable cut/copy/paste key events
elm.onkeydown = interceptKeys
// Disable right click events
elm.oncontextmenu = function() {
return false
}
}
function interceptKeys(evt) {
evt = evt||window.event // IE support
var c = evt.keyCode
var ctrlDown = evt.ctrlKey||evt.metaKey // Mac support
// Check for Alt+Gr (http://en.wikipedia.org/wiki/AltGr_key)
if (ctrlDown && evt.altKey) return true
// Check for ctrl+c, v and x
else if (ctrlDown && c==67) return false // c
else if (ctrlDown && c==86) return false // v
else if (ctrlDown && c==88) return false // x
// Otherwise allow
return true
}
I've used event.ctrlKey rather than checking for the key code as on most browsers on Mac OS X Ctrl/Alt "down" and "up" events are never triggered, so the only way to detect is to use event.ctrlKey in the e.g. c event after the Ctrl key is held down. I've also substituted ctrlKey with metaKey for macs.
Limitations of this method:
Opera doesn't allow disabling right click events
Drag and drop between browser windows can't be prevented as far as I know.
The edit->copy menu item in e.g. Firefox can still allow copy/pasting.
There's also no guarantee that for people with different keyboard layouts/locales that copy/paste/cut are the same key codes (though layouts often just follow the same standard as English), but blanket "disable all control keys" mean that select all etc will also be disabled so I think that's a compromise which needs to be made.
If you use the ctrlKey property, you don't need to maintain state.
$(document).keydown(function(event) {
// Ctrl+C or Cmd+C pressed?
if ((event.ctrlKey || event.metaKey) && event.keyCode == 67) {
// Do stuff.
}
// Ctrl+V or Cmd+V pressed?
if ((event.ctrlKey || event.metaKey) && event.keyCode == 86) {
// Do stuff.
}
// Ctrl+X or Cmd+X pressed?
if ((event.ctrlKey || event.metaKey) && event.keyCode == 88) {
// Do stuff.
}
}
There's another way of doing this: onpaste, oncopy and oncut events can be registered and cancelled in IE, Firefox, Chrome, Safari (with some minor problems), the only major browser that doesn't allow cancelling these events is Opera.
As you can see in my other answer intercepting Ctrl+V and Ctrl+C comes with many side effects, and it still doesn't prevent users from pasting using the Firefox Edit menu etc.
function disable_cutcopypaste(e) {
var fn = function(evt) {
// IE-specific lines
evt = evt||window.event
evt.returnValue = false
// Other browser support
if (evt.preventDefault)
evt.preventDefault()
return false
}
e.onbeforepaste = e.onbeforecopy = e.onbeforecut = fn
e.onpaste = e.oncopy = e.oncut = fn
}
Safari still has some minor problems with this method (it clears the clipboard in place of cut/copy when preventing default) but that bug appears to have been fixed in Chrome now.
See also: http://www.quirksmode.org/dom/events/cutcopypaste.html and the associated test page http://www.quirksmode.org/dom/events/tests/cutcopypaste.html for more information.
Live Demo :
http://jsfiddle.net/abdennour/ba54W/
$(document).ready(function() {
$("#textA").bind({
copy : function(){
$('span').text('copy behaviour detected!');
},
paste : function(){
$('span').text('paste behaviour detected!');
},
cut : function(){
$('span').text('cut behaviour detected!');
}
});
});
Short solution for preventing user from using context menu, copy and cut in jQuery:
jQuery(document).bind("cut copy contextmenu",function(e){
e.preventDefault();
});
Also disabling text selection in CSS might come handy:
.noselect {
-webkit-touch-callout: none;
-webkit-user-select: none;
-khtml-user-select: none;
-moz-user-select: none;
-ms-user-select: none;
user-select: none;
}
Another approach (no plugin needed) it to just use ctrlKey property of the event object that gets passed in. It indicates if Ctrl was pressed at the time of the event, like this:
$(document).keypress("c",function(e) {
if(e.ctrlKey)
alert("Ctrl+C was pressed!!");
});
See also jquery: keypress, ctrl+c (or some combo like that).
You can use this code for rightclick, CTRL+C, CTRL+V, CTRL+X detect and prevent their action
$(document).bind('copy', function(e) {
alert('Copy is not allowed !!!');
e.preventDefault();
});
$(document).bind('paste', function() {
alert('Paste is not allowed !!!');
e.preventDefault();
});
$(document).bind('cut', function() {
alert('Cut is not allowed !!!');
e.preventDefault();
});
$(document).bind('contextmenu', function(e) {
alert('Right Click is not allowed !!!');
e.preventDefault();
});
instead of onkeypress, use onkeydown.
<input type="text" onkeydown="if(event.ctrlKey && event.keyCode==86){return false;}" name="txt">
If anyone is interested in a simple vanilla JavaScript approach, see below.
Fiddle Link: DEMO
let ctrlActive = false;
let cActive = false;
let vActive = false
document.body.addEventListener('keyup', event => {
if (event.key == 'Control') ctrlActive = false;
if (event.code == 'KeyC') cActive = false;
if (event.code == 'KeyV') vActive = false;
})
document.body.addEventListener('keydown', event => {
if (event.key == 'Control') ctrlActive = true;
if (ctrlActive == true && event.code == 'KeyC') {
// this disables the browsers default copy functionality
event.preventDefault()
// perform desired action(s) here...
console.log('The CTRL key and the C key are being pressed simultaneously.')
}
if (ctrlActive == true && event.code == 'KeyV') {
// this disables the browsers default paste functionality
event.preventDefault()
// perform desired action(s) here...
console.log('The CTRL key and the V key are being pressed simultaneously.')
}
})
The code above would disable the default copy in the browser. If you'd like keep the copy functionality in the browser, just comment out this bit: event.preventDefault() and you can then run any desired actions while allowing the user to copy content.
I wrote a jQuery plugin, which catches keystrokes. It can be used to enable multiple language script input in html forms without the OS (except the fonts). Its about 300 lines of code, maybe you like to take a look:
http://miku.github.com/jquery-retype
Generally, be careful with such kind of alterations. I wrote the plugin for a client because other solutions weren't available.
Don't forget that, while you might be able to detect and block Ctrl+C/V, you can still alter the value of a certain field.
Best example for this is Chrome's Inspect Element function, this allows you to change the value-property of a field.
A hook that allows for overriding copy events, could be used for doing the same with paste events. The input element cannot be display: none; or visibility: hidden; sadly
export const useOverrideCopy = () => {
const [copyListenerEl, setCopyListenerEl] = React.useState(
null as HTMLInputElement | null
)
const [, setCopyHandler] = React.useState<(e: ClipboardEvent) => void | null>(
() => () => {}
)
// appends a input element to the DOM, that will be focused.
// when using copy/paste etc, it will target focused elements
React.useEffect(() => {
const el = document.createElement("input")
// cannot focus a element that is not "visible" aka cannot use display: none or visibility: hidden
el.style.width = "0"
el.style.height = "0"
el.style.opacity = "0"
el.style.position = "fixed"
el.style.top = "-20px"
document.body.appendChild(el)
setCopyListenerEl(el)
return () => {
document.body.removeChild(el)
}
}, [])
// adds a event listener for copying, and removes the old one
const overrideCopy = (newOverrideAction: () => any) => {
setCopyHandler((prevCopyHandler: (e: ClipboardEvent) => void) => {
const copyHandler = (e: ClipboardEvent) => {
e.preventDefault()
newOverrideAction()
}
copyListenerEl?.removeEventListener("copy", prevCopyHandler)
copyListenerEl?.addEventListener("copy", copyHandler)
copyListenerEl?.focus() // when focused, all copy events will trigger listener above
return copyHandler
})
}
return { overrideCopy }
}
Used like this:
const customCopyEvent = () => {
console.log("doing something")
}
const { overrideCopy } = useOverrideCopy()
overrideCopy(customCopyEvent)
Every time you call overrideCopy it will refocus and call your custom event on copy.
Another simple way using Jquery:
$(document).keydown( function(e)
{
if (e.ctrlKey && e.key == 'c')
{
console.log('got ctrl c');
}
else if (e.ctrlKey && e.key == 'v')
{
console.log('got ctrl v');
}
});
element.addEventListener('keydown', function (e) {
if (e.key == 'c' && e.ctrlKey) {
e.preventDefault(); // prevent from copying
}
if (e.key == 'v' && e.ctrlKey) {
e.preventDefault(); // prevent from pasting
}
}
i already have your problem and i solved it by the following code .. that accept only numbers
$('#<%= mobileTextBox.ClientID %>').keydown(function(e) {
///// e.which Values
// 8 : BackSpace , 46 : Delete , 37 : Left , 39 : Rigth , 144: Num Lock
if (e.which != 8 && e.which != 46 && e.which != 37 && e.which != 39 && e.which != 144
&& (e.which < 96 || e.which > 105 )) {
return false;
}
});
you can detect Ctrl id e.which == 17
Important note
I was using e.keyCode for a while and i detected that when i press Ctrl+., This attribute returns a wrong number, 190, while the ascii code of . is 46!
So you should use e.key.toUpperCase().charCodeAt(0) instead of e.keyCode.
$(document).keydown(function(event) {
let keyCode = e.key.toUpperCase().charCodeAt(0);
...
}
You can listen to the keypress event, and halt the default event (entering the text) if it matches the specific keycodes
There is some ways to prevent it.
However the user will be always able to turn the javascript off or just look on the source code of the page.
Some examples (require jQuery)
/**
* Stop every keystroke with ctrl key pressed
*/
$(".textbox").keydown(function(){
if (event.ctrlKey==true) {
return false;
}
});
/**
* Clear all data of clipboard on focus
*/
$(".textbox").focus(function(){
if ( window.clipboardData ) {
window.clipboardData.setData('text','');
}
});
/**
* Block the paste event
*/
$(".textbox").bind('paste',function(e){return false;});
Edit: How Tim Down said, this functions are all browser dependents.