Combining these two functions into one - javascript

Hey guys I have a password validator that I amd having issues working on, its quite lengthy and I think can be shortened down and simplified if possible.
Could someone assist me in simplifying it. Im talking about the checkValidPassword() function.
function check(input) {
if (input.value != document.getElementById('password').value) {
input.setCustomValidity('Password Must be Matching.');
} else {
// input is valid -- reset the error message
input.setCustomValidity('');
// check the length of the password
checkValidPassword(input);
}
}
function checkValidPassword(input) {
var password = document.getElementById('password');
var confirm_password = document.getElementById('confirm password');
if (password.value.length < 8) {
password.setCustomValidity('Password must contain at least 8 characters!');
} else {
var re = /[0-9]/;
if (!re.test(password.value)) {
password.setCustomValidity('password must contain at least one number (0-9)!');
} else {
password.setCustomValidity("");
}
}
}
And im trying to implement a way for the user to must include atleast a number also. I was thinking about
str.match(/^(?=.*[0-9])(?=.*[a-z])(?=.*[A-Z])([a-zA-Z0-9]{8,})$/)
Would I include that in the if statment with $$ to symbolize and also check characters ?
if(password.value.length < 8 && str.match(/^(?=.*[0-9])(?=.*[a-z])(?=.*[A-Z])([a-zA-Z0-9]{8,})$/)) {

This is essentially a code review question, but ok... I'd rewrite your function to something like:
function checkPassword() {
var password = document.getElementById('password');
var confirm_password = document.getElementById('confirm password');
if (password.value != confirm_password.value) {
password.setCustomValidity('Password Must be Matching.');
return false;
}
if(password.value.length < 8 ) {
password.setCustomValidity('Password must contain at least 8 characters!');
return false;
}
if(!/[0-9]/.test(password.value)) {
password.setCustomValidity('password must contain at least one number (0-9)!');
return false;
}
return true;
}
Basically, check each condition individually and return immediately if it fails, thus avoiding extra indentation ("early exits"). This is a bit verbose, but far more readable than a monster regular expression, especially if you don't know for sure what it does.

I managed to figure it out, I combined them both by just putting the else into one another.
function ValidatePassword(pass, confirm_pass) {
if (pass.value != confirm_pass.value || pass.value == "" || confirm_pass.value == "") {
confirm_pass.setCustomValidity("the Passwords do not match");
pass.setCustomValidity("the Passwords do not match");
} else {
if(pass.value.match(/(?=^.{8,30}$)([a-zA-Z]+[0-9])$/)) {
pass.setCustomValidity("");
confirm_pass.setCustomValidity("");
} else {
pass.setCustomValidity("the password doesnt have numbers");
confirm_pass.setCustomValidity("the password doesnt have numbers");
}
}
}
Here is what I made the form look like:
<form>
password
<input id="pass" type="password" required="" placeholder="Password" />
<br> confirm
<input id="confirm_pass" type="password" required="" placeholder="confirm" onfocus="ValidatePassword(document.getElementById('pass'), this);" oninput="ValidatePassword(document.getElementById('pass'), this);" />
<br> username :
<input id="username" required="" type="text">
<br>
<button class="btnform" name="register" type="submit">Complete Registration</button>
</form>

Related

How to validate login trough post request upon clicking the login button in javascript?

I'm having problems getting this code to validate when clicking on the login button.
** my html code **
<form action="abc.php"
method="post"
onsubmit="return jcheck();">
<div id="id_box">
<input type="text"
name="email"
id="id_text" placeholder="E-mail" >
<div id="pass_box">
<input type="password"
name="password" id="pass_text" placeholder="Password">
<div id="submit_box">
<input
type="submit"
id="sub_box"
onClick="click_event()"
value="Login">
my javascript code:
function click_event(){
jcheck();
function validate_ID(){
var email = document.getElementById('id_text');
var filter = /^[a-z0-9](\.?[a-z0-9]){1,}#threadsol\.com$/;
var filter1 = /^[a-z0-9](\.?[a-z0-9]){1,}#intellocut\.com$/;
var flag=0;
if (filter.test(email.value)==false
&& filter1.test(email.value)==false ) {
$('#warn_pass').html("Enter Valid Email or Password");
$("#e_asterics").html("");
return false;
} else
return true;
}
function validate_Pass() {
var pass =document.getElementById('pass_text');
var filter = /^(?=.*\d)(?=.*[a-z])(?=.*[A-Z])(?=.*[^a-zA-Z0-9])(?!.*\s). 4,}$/;
if (filter.test(pass.value)==false ) {
$('#warn_pass').html("Enter Valid Email or Password");
$("#p_asterics").html("");
return false;
} else
return true;
}
function jcheck();
$("#e_asterics").html("");$("#p_asterics").html("");
$('#warn_text').html("");$('#warn_pass').html("");
var name = jQuery.trim($("#id_text").val());var pas = jQuery.trim($("#pass_text").val());
if ((name.length == 0) && (pas.length == 0)) {
$('#warn_text').html("*Indicates required field");
$('#warn_pass').html("* Indicates required field");
$("#e_asterics").html("*");$("#p_asterics").html("*"); }
else if (name.length == 0)) {
$("#e_asterics").html("*");
$("#p_asterics").html("");
$('#warn_pass').html("Email Id Required");
} else if ((pas.length == 0)) {
if(name.length != 0)
{
validate_ID();
} else {
$("#e_asterics").html("*");
$('#warn_text').html("Enter Email Id");
}
$("#p_asterics").html("*");
$('#warn_pass').html("Password Required");
}
}
return false;
}
For starters you should always indent your code so errors are easier to find. I helped you do a bit of indenting and there are a lot of problems in the code. One thing you are doing wrong is you need to close functions, else branches and html tags.
All HTML tags should end with an end tag or be closed immediately.
Example <div></div> or <div /> if you don't do this the browser may render your page differently on different browsers. You have missed this on your input tags you divs and your form tag. Perhaps you should check the whole html document for more of these errors.
Functions should in javascript should always look like this
function name(parameters, ...) {
}
or like this
var name = function(parameters, ...) {
}
the the name and parameters may vary but generally the function should look like this.
if statements else branches and else if branches should all have enclosing brackets for their code.
if () {
//code
} else if () {
//code
} else {
//code
}
If you do not close start and close else brackets the javascript will behave in very strange and unexpected ways. In fact i think your code might not even compile.
If you are using chrome please press Ctrl + Shift + J and look in the Console tab. You should see some error messages there. When you click the submit button.
Also using onClick on the submit button may be dangerous as I don't think this blocks submit. A better way to achieve the requested functionality is probably to either use a button type input and go with onClick or use the onSubmit function on the form. You are currently using both and its really no way to tell if click_event or jcheck will run first. Perhaps you should debug and see in which order the function calls happen. You can use chrome to debug by pressing CTRL + Shift + J and setting debug points in the Source tab.
You have a minor stylistic error as well where you compare the result of the regexp test() with false. The return value of test is already a Boolean and does not need to be compared.
Here is a guestimation of how the HTML should look. Its hard to say if its right as I have no more info to go on than your code and it has a lot of problems.
<form action="abc.php" method="post" onsubmit="return jcheck();">
<div id="id_box">
<input type="text" name="email" id="id_text" placeholder="E-mail" />
</div>
<div id="pass_box">
<input type="password" name="password" id="pass_text" placeholder="Password">
</div>
<div id="submit_box">
<input
type="submit"
id="sub_box"
value="Login" />
</div>
</form>
Here is what the js might look like. Here the missing brackets makes it difficult to tell where functions should end so I have had to guess a lot.
/* I find it hard to belive you wanted to encapsule your functions inside the
click_event function so I took the liberty of placing all
functions in the glonbal scope as this is probably what you inteneded.
I removed the click_event handler as it only does the same thing as the onSubmit.
*/
function validate_ID() {
var email = document.getElementById('id_text');
var filter = /^[a-z0-9](\.?[a-z0-9]){1,}#threadsol\.com$/;
var filter1 = /^[a-z0-9](\.?[a-z0-9]){1,}#intellocut\.com$/;
var flag=0;
// Or feels better here as there is no way the email ends with bot #intellocut and #threadsol
// It also feels strange that these are the invalid adresses maby you messed up here and should change
// the contents of the else and the if branch.
if (filter.test(email.value) || filter1.test(email.value)) {
$('#warn_pass').html("Enter Valid Email or Password");
$("#e_asterics").html("");
return false;
} else {
return true;
}
}
// This funcion is not used Im guessing you should have used it in
function validate_Pass() {
var pass =document.getElementById('pass_text');
/* The filter below could cause problems for users in deciding password unless
you tell them some where what the rules are.
It was missing a { bracket before the 4 at the end that I added make sure
it is right now. If you are going to use the code.
*/
var filter = /^(?=.*\d)(?=.*[a-z])(?=.*[A-Z])(?=.*[^a-zA-Z0-9])(?!.*\s). {4,}$/;
if (filter.test(pass.value)) {
$('#warn_pass').html("Enter Valid Email or Password");
$("#p_asterics").html("");
return false;
} else {
return true;
}
}
/* There are betterways to deal with multiple validation than chaining them like
this but Im guessing this will work. Im guessing that if you want to use the
password validation you should call it some where in this function.
like so 'validate_Pass()'
*/
function jcheck() {
$("#e_asterics").html("");$("#p_asterics").html("");
$('#warn_text').html("");$('#warn_pass').html("");
var name = jQuery.trim($("#id_text").val());var pas = jQuery.trim($("#pass_text").val());
if ((name.length === 0) && (pas.length === 0)) {
$('#warn_text').html("*Indicates required field");
$('#warn_pass').html("* Indicates required field");
$("#e_asterics").html("*");
$("#p_asterics").html("*"); }
else if (name.length === 0) {
$("#e_asterics").html("*");
$("#p_asterics").html("");
$('#warn_pass').html("Email Id Required");
} else if (pas.length === 0) {
if(name.length !== 0) {
validate_ID();
} else {
$("#e_asterics").html("*");
$('#warn_text').html("Enter Email Id");
}
}
}

Remove form error with correct input

I just made a registration form which will tell you in red(CSS) letters if something is wrong. However I want this text to go away as soon as the user writes it correctly. How do I do that?
<script>
function validateForm2() {
var usrnm2 = document.getElementById("usrnm2").value;
var passw2 = document.getElementById("passw2").value;
var cnfpassw2 = document.getElementById("cnfpassw2").value;
var age = document.getElementById("age").value;
if (usrnm2 == null || usrnm2 == "") {
document.getElementById("error1").innerHTML = "You must enter a username";
return false;
}
else if (passw2 == null || passw2 == "") {
document.getElementById("error2").innerHTML = "You must enter a password";
return false;
}
else if (cnfpassw2 !== passw2) {
document.getElementById("error3").innerHTML = "Password does not match";
return false;
}
else if (age < 18) {
document.getElementById("error4").innerHTML = "You are not old enough to enter this site"
return false;
}
else {
alert("Congratulations, you have registered successfully!")
}
}
</script>
<script>
function register2() {
validateForm2()
}
</script>
<form>
Username:
<input id="usrnm2" type="text" name="username"><p id="error1"></p>
Password
<input id="passw2" type="password" name="password"><p id="error2"></p>
Confirm Password
<input id="cnfpassw2" type="password" name="confirmpw2"><p id="error3"></p>
Age
<input id="age" type="number" name="age"><p id="error4"></p><br />
<input id="bttn2" type="button" value="Register!" onclick="register2()"><br />
</form>
Separate the validation conditions into single block if statements, and then include a handler for returning the fields to normal when they are entered correctly:
if (field is entered incorrectly) {
document.getElementById("error").innerHTML = "You must enter correctly";
return false;
}
else {
document.getElementById("error").innerHTML = "";
}
...
alert("Congratulations, you have registered successfully!");
You simply need to place the alert after all of the statements - it will execute as long as none of the conditions fail and thus return.

Validating Password

I'm trying to validate a password using javascript, It's to make sure that when changing the password, the new password entered is equal to that of the re-entering of the new password (user is asked to enter their new password twice so both have to match) but at the same time, i want to make sure that the new password is at least 6 characters long, I have these functions separately but don't know how to combine them... thanks for help in advance!
This is what i have so far...
This is to make sure the new passwords match:
function validatePassword()
{
var new_password = document.getElementById("new_password").value;
var confirm_new_password = document.getElementById("confirm_new_password").value;
<!-- if they match, go to next page -->
if ( new_password == confirm_new_password)
{
return true;
}
<!-- if they don't match, an error message is displayed -->
else
{
alert("Passwords do not match.");
}
return false;
}
This is for length of password:
function validatePassword()
{
if (document.getElementById("new_password").value.length < "5")
{
<!--If pasword is less than 5 characters long, display error message-->
alert("Please ensure your password is at least 6 characters long.");
return false;
}
return true;
}
How do i combine both of these to form a SINGLE function where the two new passwords are checked so that they match, and also check that they are longer than 6 characters?
To just combine your two functions, this would work:
function validatePassword()
{
var new_password = document.getElementById("new_password").value;
var confirm_new_password = document.getElementById("confirm_new_password").value;
if (new_password.length < 5)
{
<!--If pasword is less than 5 characters long, display error message-->
alert("Please ensure your password is at least 6 characters long.");
return false;
}
else if ( new_password != confirm_new_password)
{
alert("Passwords do not match.");
return false;
}
else
{
return true;
}
}
Although I agree, there are better procedures out there. And please, make sure you're doing server-side validation as well since client-side validation is very easy to skip around.
i m not sure but you can call validatePassword() this function inside
if ( new_password == confirm_new_password)
{
validatePassword();
}
You have two options, either make the two functions a single function, or make them two separate functions and call them both before you submit / process your form.
if (validatePasswordLength() && validatePasswordsMatch()) {
// Continue
}
you have to try this code that is small and working.
if(document.getElementById("new_password").value != document.getElementById("confirm_new_password").value){
alert("Passwords do not match.");
return false;
}
<script>
function validatePassword()
{
var new_password = document.getElementById("new_password").value;
var confirm_new_password = document.getElementById("confirm_new_password").value;
if (document.getElementById("new_password").value.length < "5")
{
alert("Please ensure your password is at least 6 characters long.");
return false;
}
if (new_password == confirm_new_password)
{
alert("Password no match");
return false;
}
return true;
}
</script>
<form action="" onsubmit="return validatePassword()">
<p>New Password: <input type="password" id="new_password" name="new_password" /></p>
<p>Confirm Password: <input type="password" id="confirm_new_password" name="confirm_new_password" /></p>
<p><input type="submit" value="submit" /></p>
</form>

Form Validation

JS:
validate document.forms();
if (document.forms[0].userAge.value == "") {
alert("Age field cannot be empty.");
return false;
}
if (document.forms[0].userAge.value < 5) {
alert("Your age input is not correct.");
return false;
}
if (userage == isNumber) {
alert("Your age input is not correct.");
return false;
}
alert("Name and Age are valid.");
return true;
HTML:
<label for="userAge">Age:</label>
<input type="text" name="userAge" id="userAge" />
</div>
If this is the code I have, how would I make it so that if someone were to enter a non number in the age text box an alert would come up saying " Your input is not correct"?
Edit: I originally suggested using parseInt with isNaN() to test if the input was non-numeric. Well, it seems that using a regex is preferrable not only formatching cases like "4a" correctly, but it's actually faster in many cases (surprise!).
I mocked up some HTML with a button to illustrate.
HTML:
<form>
<label for="userAge">Age:</label>
<input type="text" name="userAge" id="userAge" />
<input type="button" id="test" name="test" value="Test" />
</form>
JavaScript:
function validateForm() {
// get the input value once and use a variable
// this makes the rest of the code more readable
// and has a small performance benefit in retrieving
// the input value once
var userAge = document.forms[0].userAge.value;
// is it blank?
if (userAge === "") {
alert("Age field cannot be empty.")
return false;
}
// is it a valid number? testing for positive integers
if (!userAge.match(/^\d+$/)) {
alert("Your age input is not correct.")
return false;
}
// you could also test parseInt(userAge, 10) < 5
if (userAge < 5) {
alert("Your age input is not correct.")
return false;
}
alert("Name and Age are valid.");
return true;
}
// trigger validateForm() however you want, I did this as an example
document.getElementById("test").onclick = validateForm;
​Here is a jsFiddle to demonstrate: http://jsfiddle.net/willslab/m2spX/6/
About the regex: userAge.match(/^\d+$/) returns true if userAge only contains a positive integer. The beginning / and ending / indicate a regular expression literal. \d indicates ASCII digits only. + matches one or more occurrences of the previous pattern (digits in this case). ^ indicates match from the beginning, and $ indicates match until the end. So /^\d+$/ is a regex literal matching only ASCII digits from beginning to end!
Also note that you can combine the last two if statements using an OR operator (||). I left these isolated in case you want to give each one a unique validation message.
It would look like this:
if (!userAge.match(/^\d+$/) || userAge < 5) {
alert("Your age input is not correct.")
return false;
}
Feel free to ask any questions about the code and I will explain. I hope that helps!
I recommend you to use the following Javascript which will not allow non-numeric characters in the text field.
function isNumberKey(evt)
{
var charCode = (evt.which) ? evt.which : event.keyCode;
if (charCode > 31 && (charCode < 48 || charCode > 57))
{
return false;
}
return true;
}
<input type="text" id="userAge" name="userAge" onkeypress="return isNumberKey(event);">
Try this solution
<script language="javascript">
function validate(){
alert("validate ..."+document.forms[0].userAge.value);
if (document.forms[0].userAge.value == ""){
alert("Age field cannot be empty.");
return false;
}
if (document.forms[0].userAge.value<5){
alert("Your age input is not correct.");
return false;
}
//provide a way to validate if its numeric number..maybe using regexp
//if (isNumeric(userAge)){
// alert("Your age input is not correct.");
// return false;
//}
//alert"Name and Age are valid."
return true;
}
</script>
The HTML should be
<form>
<div><label for="userAge">Age:</label>
<input type="text" name="userAge" id="userAge" onblur="validate()"/>
</div>
</form>
use the code below
if(isNaN(document.forms[0].userAge.value)){
alert('This is not a number');
}

How to check for empty values on two fields then prompt user of error using javascript

I hope I can explain this right I have two input fields that require a price to be entered into them in order for donation to go through and submit.
The problem that I am having is that I would like the validation process check to see if one of the two fields has a value if so then proceed to submit. If both fields are empty then alert.
This is what I have in place now after adding some of the input i received earlier today:
function validate_required(field,alerttxt)
{
with (field)
{
if (value==null||value=="")
{
alert(alerttxt); return false;
}
else
{
return true;
}
}
}
function validate_form(thisform)
{
with (thisform)
{
if (validate_required(billing_name_first,"You must enter your first name to donate")==false)
{billing_name_first.focus();return false;}
else if (validate_required(billing_name_last,"You must enter your last name to donate")==false)
{billing_name_last.focus();return false;}
else if (validate_required(billing_address_street1,"You must enter your billing street address to donate")==false)
{billing_address_street1.focus();return false;}
else if (validate_required(billing_address_city,"You must enter your billing address city to donate")==false)
{billing_address_city.focus();return false;}
else if (validate_required(billing_address_state,"You must enter your billing address state to donate")==false)
{billing_address_state.focus();return false;}
else if (validate_required(billing_address_zip,"You must enter your billing address zip code to donate")==false)
{billing_address_zip.focus();return false;}
else if (validate_required(billing_address_country,"You must enter your billing address country to donate")==false)
{billing_address_country.focus();return false;}
else if (validate_required(donor_email,"You must enter your email address to donate")==false)
{donor_email.focus();return false;}
else if (validate_required(card_number,"You must enter your credit card number to donate")==false)
{card_number.focus();return false;}
else if (validate_required(card_cvv,"You must enter your credit card security code to donate")==false)
{card_cvv.focus();return false;}
else if (validate_required(input1,"Need to enter a donation amount to continue")==false && validate_required(input2, "Need to enter a donation amount to continue")==false)
{
input1.focus();
return false;
}
}
}
This works fine... other than the fact that I get a message that reads error undefined... which i click ok about 2 times then I get the correct alert and instead of allowing me to correct the problem in IE7 and IE8 the form just processes.
Thanks guys any help would do
Matt
If I am understanding correctly, you only want to do the alert if both of the inputs are empty. If that's the case here's a refactoring of your code that will handle that.
function validate_required(field)
{
with (field)
{
if (value==null||value=="")
{
return false;
}
else
{
return true;
}
}
}
function validate_form(thisform)
{
with (thisform)
{
if (validate_required(input1)==false && validate_required(input2)==false)
{
alert('Need a donation to continue');
input1.focus();
return false;
}
}
}
take the alert() out of your assessment function- you're trying to do too much at once. a function to determine if input is valid or not should do only that one thing.
determine the state of your inputs first and then do something like
var field1Pass = validate_required(input1);
var field2Pass = validate_required(input2);
if ( !(field1Pass && field2Pass) ) {
alert("Need a donation amount to continue");
// TODO: logic to determine which field to focus on
return false;
}
var msg = "Need a donation amount to continue";
function validate_required(value) {
if(isNaN(value) || value == null || value == "") {
return false;
}
return true;
}
function validate_form(thisform) {
var i1 = validate_required($(thisform.input1).val());
var i2 = validate_required($(thisform.input2).val());
if(!(i1 && i2)) {
alert(msg);
thisform.input2.focus();
return false;
}
}
Look at the jQuery validation plugin. With the plugin it would just be a matter setting up the rules properly. You could get fancier and replace the default messages if you want. Check out the examples.
<script type="text/javascript">
$(function() {
$('form').validate({
'input1': {
required: {
depends: function() { $('#input2').val() == '' }
}
}
});
});
</script>
This sets it up so that input1 is required if input2 is empty, which should be sufficient since if input1 has a value, you don't need input2 and if neither has a value, then it will show your message for input1.
<input type="text" name="input1" />
<input type="text" name="input2" />
Here's my take, with refocusing on the first field that failed:
<body>
<form action="#" onsubmit="return validate(this);">
<input type="text" name="val0" /><br />
<input type="text" name="val1" /><br />
<input type="submit" />
</form>
<script type="text/javascript">
function validate(form) {
var val0Elem = form.val0, val1Elem=form.val1, elementToFocus;
// check fields and save where it went wrong
if (!numeric(val0Elem.value)) {elementToFocus=val0Elem;}
else if (!numeric(val1Elem.value)) {elementToFocus=val1Elem;}
// if there is an element to focus now, some validation failed
if (elementToFocus) {
alert('Enter numbers in both fields, please.')
// using select() instead of focus to help user
// get rid of his crap entry :)
elementToFocus.select();
// ..and fail!
return false;
}
// Helper function, "if a string is numeric":
// 1: it is not 'falsy' (null, undefined or empty)
// 2: it is longer than 0 too (so that '0' can be accepted)
// 3: it passes check for numericality using the builtin function isNaN
function numeric(s) {return (s && s.length>0 && !isNaN(s));}
}
</script>
</body>

Categories