Related
I have some JavaScript code that communicates with an XML-RPC backend.
The XML-RPC returns strings of the form:
<img src='myimage.jpg'>
However, when I use the JavaScript to insert the strings into HTML, they render literally. I don't see an image, I literally see the string:
<img src='myimage.jpg'>
My guess is that the HTML is being escaped over the XML-RPC channel.
How can I unescape the string in JavaScript? I tried the techniques on this page, unsuccessfully: http://paulschreiber.com/blog/2008/09/20/javascript-how-to-unescape-html-entities/
What are other ways to diagnose the issue?
Most answers given here have a huge disadvantage: if the string you are trying to convert isn't trusted then you will end up with a Cross-Site Scripting (XSS) vulnerability. For the function in the accepted answer, consider the following:
htmlDecode("<img src='dummy' onerror='alert(/xss/)'>");
The string here contains an unescaped HTML tag, so instead of decoding anything the htmlDecode function will actually run JavaScript code specified inside the string.
This can be avoided by using DOMParser which is supported in all modern browsers:
function htmlDecode(input) {
var doc = new DOMParser().parseFromString(input, "text/html");
return doc.documentElement.textContent;
}
console.log( htmlDecode("<img src='myimage.jpg'>") )
// "<img src='myimage.jpg'>"
console.log( htmlDecode("<img src='dummy' onerror='alert(/xss/)'>") )
// ""
This function is guaranteed to not run any JavaScript code as a side-effect. Any HTML tags will be ignored, only text content will be returned.
Compatibility note: Parsing HTML with DOMParser requires at least Chrome 30, Firefox 12, Opera 17, Internet Explorer 10, Safari 7.1 or Microsoft Edge. So all browsers without support are way past their EOL and as of 2017 the only ones that can still be seen in the wild occasionally are older Internet Explorer and Safari versions (usually these still aren't numerous enough to bother).
Do you need to decode all encoded HTML entities or just & itself?
If you only need to handle & then you can do this:
var decoded = encoded.replace(/&/g, '&');
If you need to decode all HTML entities then you can do it without jQuery:
var elem = document.createElement('textarea');
elem.innerHTML = encoded;
var decoded = elem.value;
Please take note of Mark's comments below which highlight security holes in an earlier version of this answer and recommend using textarea rather than div to mitigate against potential XSS vulnerabilities. These vulnerabilities exist whether you use jQuery or plain JavaScript.
EDIT: You should use the DOMParser API as Wladimir suggests, I edited my previous answer since the function posted introduced a security vulnerability.
The following snippet is the old answer's code with a small modification: using a textarea instead of a div reduces the XSS vulnerability, but it is still problematic in IE9 and Firefox.
function htmlDecode(input){
var e = document.createElement('textarea');
e.innerHTML = input;
// handle case of empty input
return e.childNodes.length === 0 ? "" : e.childNodes[0].nodeValue;
}
htmlDecode("<img src='myimage.jpg'>");
// returns "<img src='myimage.jpg'>"
Basically I create a DOM element programmatically, assign the encoded HTML to its innerHTML and retrieve the nodeValue from the text node created on the innerHTML insertion. Since it just creates an element but never adds it, no site HTML is modified.
It will work cross-browser (including older browsers) and accept all the HTML Character Entities.
EDIT: The old version of this code did not work on IE with blank inputs, as evidenced here on jsFiddle (view in IE). The version above works with all inputs.
UPDATE: appears this doesn't work with large string, and it also introduces a security vulnerability, see comments.
A more modern option for interpreting HTML (text and otherwise) from JavaScript is the HTML support in the DOMParser API (see here in MDN). This allows you to use the browser's native HTML parser to convert a string to an HTML document. It has been supported in new versions of all major browsers since late 2014.
If we just want to decode some text content, we can put it as the sole content in a document body, parse the document, and pull out the its .body.textContent.
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
We can see in the draft specification for DOMParser that JavaScript is not enabled for the parsed document, so we can perform this text conversion without security concerns.
The parseFromString(str, type) method must run these steps, depending on type:
"text/html"
Parse str with an HTML parser, and return the newly created Document.
The scripting flag must be set to "disabled".
NOTE
script elements get marked unexecutable and the contents of noscript get parsed as markup.
It's beyond the scope of this question, but please note that if you're taking the parsed DOM nodes themselves (not just their text content) and moving them to the live document DOM, it's possible that their scripting would be reenabled, and there could be security concerns. I haven't researched it, so please exercise caution.
Matthias Bynens has a library for this: https://github.com/mathiasbynens/he
Example:
console.log(
he.decode("Jörg & Jürgen rocked to & fro ")
);
// Logs "Jörg & Jürgen rocked to & fro"
I suggest favouring it over hacks involving setting an element's HTML content and then reading back its text content. Such approaches can work, but are deceptively dangerous and present XSS opportunities if used on untrusted user input.
If you really can't bear to load in a library, you can use the textarea hack described in this answer to a near-duplicate question, which, unlike various similar approaches that have been suggested, has no security holes that I know of:
function decodeEntities(encodedString) {
var textArea = document.createElement('textarea');
textArea.innerHTML = encodedString;
return textArea.value;
}
console.log(decodeEntities('1 & 2')); // '1 & 2'
But take note of the security issues, affecting similar approaches to this one, that I list in the linked answer! This approach is a hack, and future changes to the permissible content of a textarea (or bugs in particular browsers) could lead to code that relies upon it suddenly having an XSS hole one day.
If you're using jQuery:
function htmlDecode(value){
return $('<div/>').html(value).text();
}
Otherwise, use Strictly Software's Encoder Object, which has an excellent htmlDecode() function.
You can use Lodash unescape / escape function https://lodash.com/docs/4.17.5#unescape
import unescape from 'lodash/unescape';
const str = unescape('fred, barney, & pebbles');
str will become 'fred, barney, & pebbles'
var htmlEnDeCode = (function() {
var charToEntityRegex,
entityToCharRegex,
charToEntity,
entityToChar;
function resetCharacterEntities() {
charToEntity = {};
entityToChar = {};
// add the default set
addCharacterEntities({
'&' : '&',
'>' : '>',
'<' : '<',
'"' : '"',
''' : "'"
});
}
function addCharacterEntities(newEntities) {
var charKeys = [],
entityKeys = [],
key, echar;
for (key in newEntities) {
echar = newEntities[key];
entityToChar[key] = echar;
charToEntity[echar] = key;
charKeys.push(echar);
entityKeys.push(key);
}
charToEntityRegex = new RegExp('(' + charKeys.join('|') + ')', 'g');
entityToCharRegex = new RegExp('(' + entityKeys.join('|') + '|&#[0-9]{1,5};' + ')', 'g');
}
function htmlEncode(value){
var htmlEncodeReplaceFn = function(match, capture) {
return charToEntity[capture];
};
return (!value) ? value : String(value).replace(charToEntityRegex, htmlEncodeReplaceFn);
}
function htmlDecode(value) {
var htmlDecodeReplaceFn = function(match, capture) {
return (capture in entityToChar) ? entityToChar[capture] : String.fromCharCode(parseInt(capture.substr(2), 10));
};
return (!value) ? value : String(value).replace(entityToCharRegex, htmlDecodeReplaceFn);
}
resetCharacterEntities();
return {
htmlEncode: htmlEncode,
htmlDecode: htmlDecode
};
})();
This is from ExtJS source code.
The trick is to use the power of the browser to decode the special HTML characters, but not allow the browser to execute the results as if it was actual html... This function uses a regex to identify and replace encoded HTML characters, one character at a time.
function unescapeHtml(html) {
var el = document.createElement('div');
return html.replace(/\&[#0-9a-z]+;/gi, function (enc) {
el.innerHTML = enc;
return el.innerText
});
}
element.innerText also does the trick.
In case you're looking for it, like me - meanwhile there's a nice and safe JQuery method.
https://api.jquery.com/jquery.parsehtml/
You can f.ex. type this in your console:
var x = "test &";
> undefined
$.parseHTML(x)[0].textContent
> "test &"
So $.parseHTML(x) returns an array, and if you have HTML markup within your text, the array.length will be greater than 1.
jQuery will encode and decode for you. However, you need to use a textarea tag, not a div.
var str1 = 'One & two & three';
var str2 = "One & two & three";
$(document).ready(function() {
$("#encoded").text(htmlEncode(str1));
$("#decoded").text(htmlDecode(str2));
});
function htmlDecode(value) {
return $("<textarea/>").html(value).text();
}
function htmlEncode(value) {
return $('<textarea/>').text(value).html();
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
<div id="encoded"></div>
<div id="decoded"></div>
CMS' answer works fine, unless the HTML you want to unescape is very long, longer than 65536 chars. Because then in Chrome the inner HTML gets split into many child nodes, each one at most 65536 long, and you need to concatenate them. This function works also for very long strings:
function unencodeHtmlContent(escapedHtml) {
var elem = document.createElement('div');
elem.innerHTML = escapedHtml;
var result = '';
// Chrome splits innerHTML into many child nodes, each one at most 65536.
// Whereas FF creates just one single huge child node.
for (var i = 0; i < elem.childNodes.length; ++i) {
result = result + elem.childNodes[i].nodeValue;
}
return result;
}
See this answer about innerHTML max length for more info: https://stackoverflow.com/a/27545633/694469
To unescape HTML entities* in JavaScript you can use small library html-escaper: npm install html-escaper
import {unescape} from 'html-escaper';
unescape('escaped string');
Or unescape function from Lodash or Underscore, if you are using it.
*) please note that these functions don't cover all HTML entities, but only the most common ones, i.e. &, <, >, ', ". To unescape all HTML entities you can use he library.
First create a <span id="decodeIt" style="display:none;"></span> somewhere in the body
Next, assign the string to be decoded as innerHTML to this:
document.getElementById("decodeIt").innerHTML=stringtodecode
Finally,
stringtodecode=document.getElementById("decodeIt").innerText
Here is the overall code:
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
The question doesn't specify the origin of x but it makes sense to defend, if we can, against malicious (or just unexpected, from our own application) input. For example, suppose x has a value of & <script>alert('hello');</script>. A safe and simple way to handle this in jQuery is:
var x = "& <script>alert('hello');</script>";
var safe = $('<div />').html(x).text();
// => "& alert('hello');"
Found via https://gist.github.com/jmblog/3222899. I can't see many reasons to avoid using this solution given it is at least as short, if not shorter than some alternatives and provides defence against XSS.
(I originally posted this as a comment, but am adding it as an answer since a subsequent comment in the same thread requested that I do so).
Not a direct response to your question, but wouldn't it be better for your RPC to return some structure (be it XML or JSON or whatever) with those image data (urls in your example) inside that structure?
Then you could just parse it in your javascript and build the <img> using javascript itself.
The structure you recieve from RPC could look like:
{"img" : ["myimage.jpg", "myimage2.jpg"]}
I think it's better this way, as injecting a code that comes from external source into your page doesn't look very secure. Imaging someone hijacking your XML-RPC script and putting something you wouldn't want in there (even some javascript...)
For one-line guys:
const htmlDecode = innerHTML => Object.assign(document.createElement('textarea'), {innerHTML}).value;
console.log(htmlDecode('Complicated - Dimitri Vegas & Like Mike'));
You're welcome...just a messenger...full credit goes to ourcodeworld.com, link below.
window.htmlentities = {
/**
* Converts a string to its html characters completely.
*
* #param {String} str String with unescaped HTML characters
**/
encode : function(str) {
var buf = [];
for (var i=str.length-1;i>=0;i--) {
buf.unshift(['&#', str[i].charCodeAt(), ';'].join(''));
}
return buf.join('');
},
/**
* Converts an html characterSet into its original character.
*
* #param {String} str htmlSet entities
**/
decode : function(str) {
return str.replace(/&#(\d+);/g, function(match, dec) {
return String.fromCharCode(dec);
});
}
};
Full Credit: https://ourcodeworld.com/articles/read/188/encode-and-decode-html-entities-using-pure-javascript
I know there are a lot of good answers here, but since I have implemented a bit different approach, I thought to share.
This code is a perfectly safe security-wise approach, as the escaping handler dependant on the browser, instead on the function. So, if a new vulnerability will be discovered in the future, this solution will be covered.
const decodeHTMLEntities = text => {
// Create a new element or use one from cache, to save some element creation overhead
const el = decodeHTMLEntities.__cache_data_element
= decodeHTMLEntities.__cache_data_element
|| document.createElement('div');
const enc = text
// Prevent any mixup of existing pattern in text
.replace(/⪪/g, '⪪#')
// Encode entities in special format. This will prevent native element encoder to replace any amp characters
.replace(/&([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+);/gi, '⪪$1⪫');
// Encode any HTML tags in the text to prevent script injection
el.textContent = enc;
// Decode entities from special format, back to their original HTML entities format
el.innerHTML = el.innerHTML
.replace(/⪪([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+)⪫/gi, '&$1;')
.replace(/#⪫/g, '⪫');
// Get the decoded HTML entities
const dec = el.textContent;
// Clear the element content, in order to preserve a bit of memory (it is just the text may be pretty big)
el.textContent = '';
return dec;
}
// Example
console.log(decodeHTMLEntities("<script>alert('∳∳∳∳⪪#x02233⪫');</script>"));
// Prints: <script>alert('∳∳∳∳⪪##x02233⪫');</script>
By the way, I have chosen to use the characters ⪪ and ⪫, because they are rarely used, so the chance of impacting the performance by matching them is significantly lower.
Chris answer is nice & elegant but it fails if value is undefined. Just simple improvement makes it solid:
function htmlDecode(value) {
return (typeof value === 'undefined') ? '' : $('<div/>').html(value).text();
}
a javascript solution that catches the common ones:
var map = {amp: '&', lt: '<', gt: '>', quot: '"', '#039': "'"}
str = str.replace(/&([^;]+);/g, (m, c) => map[c])
this is the reverse of https://stackoverflow.com/a/4835406/2738039
I tried everything to remove & from a JSON array. None of the above examples, but https://stackoverflow.com/users/2030321/chris gave a great solution that led me to fix my problem.
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
I did not use, because I did not understand how to insert it into a modal window that was pulling JSON data into an array, but I did try this based upon the example, and it worked:
var modal = document.getElementById('demodal');
$('#ampersandcontent').text(replaceAll(data[0],"&", "&"));
I like it because it was simple, and it works, but not sure why it's not widely used. Searched hi & low to find a simple solution.
I continue to seek understanding of the syntax, and if there is any risk to using this. Have not found anything yet.
I was crazy enough to go through and make this function that should be pretty, if not completely, exhaustive:
function removeEncoding(string) {
return string.replace(/À/g, "À").replace(/Á/g, "Á").replace(/Â/g, "Â").replace(/Ã/g, "Ã").replace(/Ä/g, "Ä").replace(/Å/g, "Å").replace(/à/g, "à").replace(/â/g, "â").replace(/ã/g, "ã").replace(/ä/g, "ä").replace(/å/g, "å").replace(/Æ/g, "Æ").replace(/æ/g, "æ").replace(/ß/g, "ß").replace(/Ç/g, "Ç").replace(/ç/g, "ç").replace(/È/g, "È").replace(/É/g, "É").replace(/Ê/g, "Ê").replace(/Ë/g, "Ë").replace(/è/g, "è").replace(/é/g, "é").replace(/ê/g, "ê").replace(/ë/g, "ë").replace(//g, "ƒ").replace(/Ì/g, "Ì").replace(/Í/g, "Í").replace(/Î/g, "Î").replace(/Ï/g, "Ï").replace(/ì/g, "ì").replace(/í/g, "í").replace(/î/g, "î").replace(/ï/g, "ï").replace(/Ñ/g, "Ñ").replace(/ñ/g, "ñ").replace(/Ò/g, "Ò").replace(/Ó/g, "Ó").replace(/Ô/g, "Ô").replace(/Õ/g, "Õ").replace(/Ö/g, "Ö").replace(/ò/g, "ò").replace(/ó/g, "ó").replace(/ô/g, "ô").replace(/õ/g, "õ").replace(/ö/g, "ö").replace(/Ø/g, "Ø").replace(/ø/g, "ø").replace(//g, "Œ").replace(//g, "œ").replace(//g, "Š").replace(//g, "š").replace(/Ù/g, "Ù").replace(/Ú/g, "Ú").replace(/Û/g, "Û").replace(/Ü/g, "Ü").replace(/ù/g, "ù").replace(/ú/g, "ú").replace(/û/g, "û").replace(/ü/g, "ü").replace(/µ/g, "µ").replace(/×/g, "×").replace(/Ý/g, "Ý").replace(//g, "Ÿ").replace(/ý/g, "ý").replace(/ÿ/g, "ÿ").replace(/°/g, "°").replace(//g, "†").replace(//g, "‡").replace(/</g, "<").replace(/>/g, ">").replace(/±/g, "±").replace(/«/g, "«").replace(/»/g, "»").replace(/¿/g, "¿").replace(/¡/g, "¡").replace(/·/g, "·").replace(//g, "•").replace(//g, "™").replace(/©/g, "©").replace(/®/g, "®").replace(/§/g, "§").replace(/¶/g, "¶").replace(/Α/g, "Α").replace(/Β/g, "Β").replace(/Γ/g, "Γ").replace(/Δ/g, "Δ").replace(/Ε/g, "Ε").replace(/Ζ/g, "Ζ").replace(/Η/g, "Η").replace(/Θ/g, "Θ").replace(/Ι/g, "Ι").replace(/Κ/g, "Κ").replace(/Λ/g, "Λ").replace(/Μ/g, "Μ").replace(/Ν/g, "Ν").replace(/Ξ/g, "Ξ").replace(/Ο/g, "Ο").replace(/Π/g, "Π").replace(/Ρ/g, "Ρ").replace(/Σ/g, "Σ").replace(/Τ/g, "Τ").replace(/Υ/g, "Υ").replace(/Φ/g, "Φ").replace(/Χ/g, "Χ").replace(/Ψ/g, "Ψ").replace(/Ω/g, "Ω").replace(/α/g, "α").replace(/β/g, "β").replace(/γ/g, "γ").replace(/δ/g, "δ").replace(/ε/g, "ε").replace(/ζ/g, "ζ").replace(/η/g, "η").replace(/θ/g, "θ").replace(/ι/g, "ι").replace(/κ/g, "κ").replace(/λ/g, "λ").replace(/μ/g, "μ").replace(/ν/g, "ν").replace(/ξ/g, "ξ").replace(/ο/g, "ο").replace(/&piρ;/g, "ρ").replace(/ρ/g, "ς").replace(/ς/g, "ς").replace(/σ/g, "σ").replace(/τ/g, "τ").replace(/φ/g, "φ").replace(/χ/g, "χ").replace(/ψ/g, "ψ").replace(/ω/g, "ω").replace(/•/g, "•").replace(/…/g, "…").replace(/′/g, "′").replace(/″/g, "″").replace(/‾/g, "‾").replace(/⁄/g, "⁄").replace(/℘/g, "℘").replace(/ℑ/g, "ℑ").replace(/ℜ/g, "ℜ").replace(/™/g, "™").replace(/ℵ/g, "ℵ").replace(/←/g, "←").replace(/↑/g, "↑").replace(/→/g, "→").replace(/↓/g, "↓").replace(/&barr;/g, "↔").replace(/↵/g, "↵").replace(/⇐/g, "⇐").replace(/⇑/g, "⇑").replace(/⇒/g, "⇒").replace(/⇓/g, "⇓").replace(/⇔/g, "⇔").replace(/∀/g, "∀").replace(/∂/g, "∂").replace(/∃/g, "∃").replace(/∅/g, "∅").replace(/∇/g, "∇").replace(/∈/g, "∈").replace(/∉/g, "∉").replace(/∋/g, "∋").replace(/∏/g, "∏").replace(/∑/g, "∑").replace(/−/g, "−").replace(/∗/g, "∗").replace(/√/g, "√").replace(/∝/g, "∝").replace(/∞/g, "∞").replace(/&OEig;/g, "Œ").replace(/œ/g, "œ").replace(/Ÿ/g, "Ÿ").replace(/♠/g, "♠").replace(/♣/g, "♣").replace(/♥/g, "♥").replace(/♦/g, "♦").replace(/ϑ/g, "ϑ").replace(/ϒ/g, "ϒ").replace(/ϖ/g, "ϖ").replace(/Š/g, "Š").replace(/š/g, "š").replace(/∠/g, "∠").replace(/∧/g, "∧").replace(/∨/g, "∨").replace(/∩/g, "∩").replace(/∪/g, "∪").replace(/∫/g, "∫").replace(/∴/g, "∴").replace(/∼/g, "∼").replace(/≅/g, "≅").replace(/≈/g, "≈").replace(/≠/g, "≠").replace(/≡/g, "≡").replace(/≤/g, "≤").replace(/≥/g, "≥").replace(/⊂/g, "⊂").replace(/⊃/g, "⊃").replace(/⊄/g, "⊄").replace(/⊆/g, "⊆").replace(/⊇/g, "⊇").replace(/⊕/g, "⊕").replace(/⊗/g, "⊗").replace(/⊥/g, "⊥").replace(/⋅/g, "⋅").replace(/&lcell;/g, "⌈").replace(/&rcell;/g, "⌉").replace(/⌊/g, "⌊").replace(/⌋/g, "⌋").replace(/〈/g, "⟨").replace(/〉/g, "⟩").replace(/◊/g, "◊").replace(/'/g, "'").replace(/&/g, "&").replace(/"/g, "\"");
}
Used like so:
let decodedText = removeEncoding("Ich heiße David");
console.log(decodedText);
Prints: Ich Heiße David
P.S. this took like an hour and a half to make.
This is the most comprehensive solution I've tried so far:
const STANDARD_HTML_ENTITIES = {
nbsp: String.fromCharCode(160),
amp: "&",
quot: '"',
lt: "<",
gt: ">"
};
const replaceHtmlEntities = plainTextString => {
return plainTextString
.replace(/&#(\d+);/g, (match, dec) => String.fromCharCode(dec))
.replace(
/&(nbsp|amp|quot|lt|gt);/g,
(a, b) => STANDARD_HTML_ENTITIES[b]
);
};
Closures can avoid creating unnecessary objects.
const decodingHandler = (() => {
const element = document.createElement('div');
return text => {
element.innerHTML = text;
return element.textContent;
};
})();
A more concise way
const decodingHandler = (() => {
const element = document.createElement('div');
return text => ((element.innerHTML = text), element.textContent);
})();
I use this in my project: inspired by other answers but with an extra secure parameter, can be useful when you deal with decorated characters
var decodeEntities=(function(){
var el=document.createElement('div');
return function(str, safeEscape){
if(str && typeof str === 'string'){
str=str.replace(/\</g, '<');
el.innerHTML=str;
if(el.innerText){
str=el.innerText;
el.innerText='';
}
else if(el.textContent){
str=el.textContent;
el.textContent='';
}
if(safeEscape)
str=str.replace(/\</g, '<');
}
return str;
}
})();
And it's usable like:
var label='safe <b> character éntity</b>';
var safehtml='<div title="'+decodeEntities(label)+'">'+decodeEntities(label, true)+'</div>';
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
// decode-html.js v1
function decodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.innerHTML = html;
const decodedHtml = textarea.textContent;
textarea.remove();
return decodedHtml;
};
// encode-html.js v1
function encodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.textContent = html;
const encodedHtml = textarea.innerHTML;
textarea.remove();
return encodedHtml;
};
// example of use:
let htmlDecoded = 'one & two & three';
let htmlEncoded = 'one & two & three';
console.log(1, htmlDecoded);
console.log(2, encodeHtml(htmlDecoded));
console.log(3, htmlEncoded);
console.log(4, decodeHtml(htmlEncoded));
All of the other answers here have problems.
The document.createElement('div') methods (including those using jQuery) execute any javascript passed into it (a security issue) and the DOMParser.parseFromString() method trims whitespace. Here is a pure javascript solution that has neither problem:
function htmlDecode(html) {
var textarea = document.createElement("textarea");
html= html.replace(/\r/g, String.fromCharCode(0xe000)); // Replace "\r" with reserved unicode character.
textarea.innerHTML = html;
var result = textarea.value;
return result.replace(new RegExp(String.fromCharCode(0xe000), 'g'), '\r');
}
TextArea is used specifically to avoid executig js code. It passes these:
htmlDecode('<& >'); // returns "<& >" with non-breaking space.
htmlDecode(' '); // returns " "
htmlDecode('<img src="dummy" onerror="alert(\'xss\')">'); // Does not execute alert()
htmlDecode('\r\n') // returns "\r\n", doesn't lose the \r like other solutions.
I've been away from jQuery development and all js in general for about three years. I can not for the life of me remember how this is supposed to work. This has been going on for four days, and I could really use some help.
Can you tell me what I am doing wrong here:
var $imgAll = $(function(f, a) {
'<img src="' + f + ' alt="' + a + '">';
});
var $imgAC = $imgAll('filename1.jpg', 'Some Alt Text');
var $imgBC = $imgAll('filename2.jpg', 'Some Alt Text');
$page.append($imgAC);
I want an output of code for images whose filenames (f) and alt texts (a) are passed using a single function. It looks like Greek at this point because I'm staring at it constantly.
Thanks for any help!
You'll want $imgAll to be a function, not the return value of a call of $. Here is how it could work:
var $imgAll = function(src, alt) {
return $('<img>').attr({src, alt});
}
var $imgAC = $imgAll('https://stackoverflow.design/assets/img/logos/so/logo-stackoverflow.svg', 'Some Alt Text');
$("body").append($imgAC);
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
Note how the call to attr avoids building the attribute strings yourself, and thereby the potential problems with characters that need escaping. Also, by naming the function parameters as the attribute names (src and alt) you can use the short object literal notation. You could even use an arrow function expression:
const $imgAll = (src, alt) => $('<img>').attr({src, alt});
I have some JavaScript code that communicates with an XML-RPC backend.
The XML-RPC returns strings of the form:
<img src='myimage.jpg'>
However, when I use the JavaScript to insert the strings into HTML, they render literally. I don't see an image, I literally see the string:
<img src='myimage.jpg'>
My guess is that the HTML is being escaped over the XML-RPC channel.
How can I unescape the string in JavaScript? I tried the techniques on this page, unsuccessfully: http://paulschreiber.com/blog/2008/09/20/javascript-how-to-unescape-html-entities/
What are other ways to diagnose the issue?
Most answers given here have a huge disadvantage: if the string you are trying to convert isn't trusted then you will end up with a Cross-Site Scripting (XSS) vulnerability. For the function in the accepted answer, consider the following:
htmlDecode("<img src='dummy' onerror='alert(/xss/)'>");
The string here contains an unescaped HTML tag, so instead of decoding anything the htmlDecode function will actually run JavaScript code specified inside the string.
This can be avoided by using DOMParser which is supported in all modern browsers:
function htmlDecode(input) {
var doc = new DOMParser().parseFromString(input, "text/html");
return doc.documentElement.textContent;
}
console.log( htmlDecode("<img src='myimage.jpg'>") )
// "<img src='myimage.jpg'>"
console.log( htmlDecode("<img src='dummy' onerror='alert(/xss/)'>") )
// ""
This function is guaranteed to not run any JavaScript code as a side-effect. Any HTML tags will be ignored, only text content will be returned.
Compatibility note: Parsing HTML with DOMParser requires at least Chrome 30, Firefox 12, Opera 17, Internet Explorer 10, Safari 7.1 or Microsoft Edge. So all browsers without support are way past their EOL and as of 2017 the only ones that can still be seen in the wild occasionally are older Internet Explorer and Safari versions (usually these still aren't numerous enough to bother).
Do you need to decode all encoded HTML entities or just & itself?
If you only need to handle & then you can do this:
var decoded = encoded.replace(/&/g, '&');
If you need to decode all HTML entities then you can do it without jQuery:
var elem = document.createElement('textarea');
elem.innerHTML = encoded;
var decoded = elem.value;
Please take note of Mark's comments below which highlight security holes in an earlier version of this answer and recommend using textarea rather than div to mitigate against potential XSS vulnerabilities. These vulnerabilities exist whether you use jQuery or plain JavaScript.
EDIT: You should use the DOMParser API as Wladimir suggests, I edited my previous answer since the function posted introduced a security vulnerability.
The following snippet is the old answer's code with a small modification: using a textarea instead of a div reduces the XSS vulnerability, but it is still problematic in IE9 and Firefox.
function htmlDecode(input){
var e = document.createElement('textarea');
e.innerHTML = input;
// handle case of empty input
return e.childNodes.length === 0 ? "" : e.childNodes[0].nodeValue;
}
htmlDecode("<img src='myimage.jpg'>");
// returns "<img src='myimage.jpg'>"
Basically I create a DOM element programmatically, assign the encoded HTML to its innerHTML and retrieve the nodeValue from the text node created on the innerHTML insertion. Since it just creates an element but never adds it, no site HTML is modified.
It will work cross-browser (including older browsers) and accept all the HTML Character Entities.
EDIT: The old version of this code did not work on IE with blank inputs, as evidenced here on jsFiddle (view in IE). The version above works with all inputs.
UPDATE: appears this doesn't work with large string, and it also introduces a security vulnerability, see comments.
A more modern option for interpreting HTML (text and otherwise) from JavaScript is the HTML support in the DOMParser API (see here in MDN). This allows you to use the browser's native HTML parser to convert a string to an HTML document. It has been supported in new versions of all major browsers since late 2014.
If we just want to decode some text content, we can put it as the sole content in a document body, parse the document, and pull out the its .body.textContent.
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
We can see in the draft specification for DOMParser that JavaScript is not enabled for the parsed document, so we can perform this text conversion without security concerns.
The parseFromString(str, type) method must run these steps, depending on type:
"text/html"
Parse str with an HTML parser, and return the newly created Document.
The scripting flag must be set to "disabled".
NOTE
script elements get marked unexecutable and the contents of noscript get parsed as markup.
It's beyond the scope of this question, but please note that if you're taking the parsed DOM nodes themselves (not just their text content) and moving them to the live document DOM, it's possible that their scripting would be reenabled, and there could be security concerns. I haven't researched it, so please exercise caution.
Matthias Bynens has a library for this: https://github.com/mathiasbynens/he
Example:
console.log(
he.decode("Jörg & Jürgen rocked to & fro ")
);
// Logs "Jörg & Jürgen rocked to & fro"
I suggest favouring it over hacks involving setting an element's HTML content and then reading back its text content. Such approaches can work, but are deceptively dangerous and present XSS opportunities if used on untrusted user input.
If you really can't bear to load in a library, you can use the textarea hack described in this answer to a near-duplicate question, which, unlike various similar approaches that have been suggested, has no security holes that I know of:
function decodeEntities(encodedString) {
var textArea = document.createElement('textarea');
textArea.innerHTML = encodedString;
return textArea.value;
}
console.log(decodeEntities('1 & 2')); // '1 & 2'
But take note of the security issues, affecting similar approaches to this one, that I list in the linked answer! This approach is a hack, and future changes to the permissible content of a textarea (or bugs in particular browsers) could lead to code that relies upon it suddenly having an XSS hole one day.
If you're using jQuery:
function htmlDecode(value){
return $('<div/>').html(value).text();
}
Otherwise, use Strictly Software's Encoder Object, which has an excellent htmlDecode() function.
You can use Lodash unescape / escape function https://lodash.com/docs/4.17.5#unescape
import unescape from 'lodash/unescape';
const str = unescape('fred, barney, & pebbles');
str will become 'fred, barney, & pebbles'
var htmlEnDeCode = (function() {
var charToEntityRegex,
entityToCharRegex,
charToEntity,
entityToChar;
function resetCharacterEntities() {
charToEntity = {};
entityToChar = {};
// add the default set
addCharacterEntities({
'&' : '&',
'>' : '>',
'<' : '<',
'"' : '"',
''' : "'"
});
}
function addCharacterEntities(newEntities) {
var charKeys = [],
entityKeys = [],
key, echar;
for (key in newEntities) {
echar = newEntities[key];
entityToChar[key] = echar;
charToEntity[echar] = key;
charKeys.push(echar);
entityKeys.push(key);
}
charToEntityRegex = new RegExp('(' + charKeys.join('|') + ')', 'g');
entityToCharRegex = new RegExp('(' + entityKeys.join('|') + '|&#[0-9]{1,5};' + ')', 'g');
}
function htmlEncode(value){
var htmlEncodeReplaceFn = function(match, capture) {
return charToEntity[capture];
};
return (!value) ? value : String(value).replace(charToEntityRegex, htmlEncodeReplaceFn);
}
function htmlDecode(value) {
var htmlDecodeReplaceFn = function(match, capture) {
return (capture in entityToChar) ? entityToChar[capture] : String.fromCharCode(parseInt(capture.substr(2), 10));
};
return (!value) ? value : String(value).replace(entityToCharRegex, htmlDecodeReplaceFn);
}
resetCharacterEntities();
return {
htmlEncode: htmlEncode,
htmlDecode: htmlDecode
};
})();
This is from ExtJS source code.
The trick is to use the power of the browser to decode the special HTML characters, but not allow the browser to execute the results as if it was actual html... This function uses a regex to identify and replace encoded HTML characters, one character at a time.
function unescapeHtml(html) {
var el = document.createElement('div');
return html.replace(/\&[#0-9a-z]+;/gi, function (enc) {
el.innerHTML = enc;
return el.innerText
});
}
element.innerText also does the trick.
In case you're looking for it, like me - meanwhile there's a nice and safe JQuery method.
https://api.jquery.com/jquery.parsehtml/
You can f.ex. type this in your console:
var x = "test &";
> undefined
$.parseHTML(x)[0].textContent
> "test &"
So $.parseHTML(x) returns an array, and if you have HTML markup within your text, the array.length will be greater than 1.
jQuery will encode and decode for you. However, you need to use a textarea tag, not a div.
var str1 = 'One & two & three';
var str2 = "One & two & three";
$(document).ready(function() {
$("#encoded").text(htmlEncode(str1));
$("#decoded").text(htmlDecode(str2));
});
function htmlDecode(value) {
return $("<textarea/>").html(value).text();
}
function htmlEncode(value) {
return $('<textarea/>').text(value).html();
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
<div id="encoded"></div>
<div id="decoded"></div>
CMS' answer works fine, unless the HTML you want to unescape is very long, longer than 65536 chars. Because then in Chrome the inner HTML gets split into many child nodes, each one at most 65536 long, and you need to concatenate them. This function works also for very long strings:
function unencodeHtmlContent(escapedHtml) {
var elem = document.createElement('div');
elem.innerHTML = escapedHtml;
var result = '';
// Chrome splits innerHTML into many child nodes, each one at most 65536.
// Whereas FF creates just one single huge child node.
for (var i = 0; i < elem.childNodes.length; ++i) {
result = result + elem.childNodes[i].nodeValue;
}
return result;
}
See this answer about innerHTML max length for more info: https://stackoverflow.com/a/27545633/694469
To unescape HTML entities* in JavaScript you can use small library html-escaper: npm install html-escaper
import {unescape} from 'html-escaper';
unescape('escaped string');
Or unescape function from Lodash or Underscore, if you are using it.
*) please note that these functions don't cover all HTML entities, but only the most common ones, i.e. &, <, >, ', ". To unescape all HTML entities you can use he library.
First create a <span id="decodeIt" style="display:none;"></span> somewhere in the body
Next, assign the string to be decoded as innerHTML to this:
document.getElementById("decodeIt").innerHTML=stringtodecode
Finally,
stringtodecode=document.getElementById("decodeIt").innerText
Here is the overall code:
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
The question doesn't specify the origin of x but it makes sense to defend, if we can, against malicious (or just unexpected, from our own application) input. For example, suppose x has a value of & <script>alert('hello');</script>. A safe and simple way to handle this in jQuery is:
var x = "& <script>alert('hello');</script>";
var safe = $('<div />').html(x).text();
// => "& alert('hello');"
Found via https://gist.github.com/jmblog/3222899. I can't see many reasons to avoid using this solution given it is at least as short, if not shorter than some alternatives and provides defence against XSS.
(I originally posted this as a comment, but am adding it as an answer since a subsequent comment in the same thread requested that I do so).
Not a direct response to your question, but wouldn't it be better for your RPC to return some structure (be it XML or JSON or whatever) with those image data (urls in your example) inside that structure?
Then you could just parse it in your javascript and build the <img> using javascript itself.
The structure you recieve from RPC could look like:
{"img" : ["myimage.jpg", "myimage2.jpg"]}
I think it's better this way, as injecting a code that comes from external source into your page doesn't look very secure. Imaging someone hijacking your XML-RPC script and putting something you wouldn't want in there (even some javascript...)
For one-line guys:
const htmlDecode = innerHTML => Object.assign(document.createElement('textarea'), {innerHTML}).value;
console.log(htmlDecode('Complicated - Dimitri Vegas & Like Mike'));
You're welcome...just a messenger...full credit goes to ourcodeworld.com, link below.
window.htmlentities = {
/**
* Converts a string to its html characters completely.
*
* #param {String} str String with unescaped HTML characters
**/
encode : function(str) {
var buf = [];
for (var i=str.length-1;i>=0;i--) {
buf.unshift(['&#', str[i].charCodeAt(), ';'].join(''));
}
return buf.join('');
},
/**
* Converts an html characterSet into its original character.
*
* #param {String} str htmlSet entities
**/
decode : function(str) {
return str.replace(/&#(\d+);/g, function(match, dec) {
return String.fromCharCode(dec);
});
}
};
Full Credit: https://ourcodeworld.com/articles/read/188/encode-and-decode-html-entities-using-pure-javascript
I know there are a lot of good answers here, but since I have implemented a bit different approach, I thought to share.
This code is a perfectly safe security-wise approach, as the escaping handler dependant on the browser, instead on the function. So, if a new vulnerability will be discovered in the future, this solution will be covered.
const decodeHTMLEntities = text => {
// Create a new element or use one from cache, to save some element creation overhead
const el = decodeHTMLEntities.__cache_data_element
= decodeHTMLEntities.__cache_data_element
|| document.createElement('div');
const enc = text
// Prevent any mixup of existing pattern in text
.replace(/⪪/g, '⪪#')
// Encode entities in special format. This will prevent native element encoder to replace any amp characters
.replace(/&([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+);/gi, '⪪$1⪫');
// Encode any HTML tags in the text to prevent script injection
el.textContent = enc;
// Decode entities from special format, back to their original HTML entities format
el.innerHTML = el.innerHTML
.replace(/⪪([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+)⪫/gi, '&$1;')
.replace(/#⪫/g, '⪫');
// Get the decoded HTML entities
const dec = el.textContent;
// Clear the element content, in order to preserve a bit of memory (it is just the text may be pretty big)
el.textContent = '';
return dec;
}
// Example
console.log(decodeHTMLEntities("<script>alert('∳∳∳∳⪪#x02233⪫');</script>"));
// Prints: <script>alert('∳∳∳∳⪪##x02233⪫');</script>
By the way, I have chosen to use the characters ⪪ and ⪫, because they are rarely used, so the chance of impacting the performance by matching them is significantly lower.
Chris answer is nice & elegant but it fails if value is undefined. Just simple improvement makes it solid:
function htmlDecode(value) {
return (typeof value === 'undefined') ? '' : $('<div/>').html(value).text();
}
a javascript solution that catches the common ones:
var map = {amp: '&', lt: '<', gt: '>', quot: '"', '#039': "'"}
str = str.replace(/&([^;]+);/g, (m, c) => map[c])
this is the reverse of https://stackoverflow.com/a/4835406/2738039
I tried everything to remove & from a JSON array. None of the above examples, but https://stackoverflow.com/users/2030321/chris gave a great solution that led me to fix my problem.
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
I did not use, because I did not understand how to insert it into a modal window that was pulling JSON data into an array, but I did try this based upon the example, and it worked:
var modal = document.getElementById('demodal');
$('#ampersandcontent').text(replaceAll(data[0],"&", "&"));
I like it because it was simple, and it works, but not sure why it's not widely used. Searched hi & low to find a simple solution.
I continue to seek understanding of the syntax, and if there is any risk to using this. Have not found anything yet.
I was crazy enough to go through and make this function that should be pretty, if not completely, exhaustive:
function removeEncoding(string) {
return string.replace(/À/g, "À").replace(/Á/g, "Á").replace(/Â/g, "Â").replace(/Ã/g, "Ã").replace(/Ä/g, "Ä").replace(/Å/g, "Å").replace(/à/g, "à").replace(/â/g, "â").replace(/ã/g, "ã").replace(/ä/g, "ä").replace(/å/g, "å").replace(/Æ/g, "Æ").replace(/æ/g, "æ").replace(/ß/g, "ß").replace(/Ç/g, "Ç").replace(/ç/g, "ç").replace(/È/g, "È").replace(/É/g, "É").replace(/Ê/g, "Ê").replace(/Ë/g, "Ë").replace(/è/g, "è").replace(/é/g, "é").replace(/ê/g, "ê").replace(/ë/g, "ë").replace(//g, "ƒ").replace(/Ì/g, "Ì").replace(/Í/g, "Í").replace(/Î/g, "Î").replace(/Ï/g, "Ï").replace(/ì/g, "ì").replace(/í/g, "í").replace(/î/g, "î").replace(/ï/g, "ï").replace(/Ñ/g, "Ñ").replace(/ñ/g, "ñ").replace(/Ò/g, "Ò").replace(/Ó/g, "Ó").replace(/Ô/g, "Ô").replace(/Õ/g, "Õ").replace(/Ö/g, "Ö").replace(/ò/g, "ò").replace(/ó/g, "ó").replace(/ô/g, "ô").replace(/õ/g, "õ").replace(/ö/g, "ö").replace(/Ø/g, "Ø").replace(/ø/g, "ø").replace(//g, "Œ").replace(//g, "œ").replace(//g, "Š").replace(//g, "š").replace(/Ù/g, "Ù").replace(/Ú/g, "Ú").replace(/Û/g, "Û").replace(/Ü/g, "Ü").replace(/ù/g, "ù").replace(/ú/g, "ú").replace(/û/g, "û").replace(/ü/g, "ü").replace(/µ/g, "µ").replace(/×/g, "×").replace(/Ý/g, "Ý").replace(//g, "Ÿ").replace(/ý/g, "ý").replace(/ÿ/g, "ÿ").replace(/°/g, "°").replace(//g, "†").replace(//g, "‡").replace(/</g, "<").replace(/>/g, ">").replace(/±/g, "±").replace(/«/g, "«").replace(/»/g, "»").replace(/¿/g, "¿").replace(/¡/g, "¡").replace(/·/g, "·").replace(//g, "•").replace(//g, "™").replace(/©/g, "©").replace(/®/g, "®").replace(/§/g, "§").replace(/¶/g, "¶").replace(/Α/g, "Α").replace(/Β/g, "Β").replace(/Γ/g, "Γ").replace(/Δ/g, "Δ").replace(/Ε/g, "Ε").replace(/Ζ/g, "Ζ").replace(/Η/g, "Η").replace(/Θ/g, "Θ").replace(/Ι/g, "Ι").replace(/Κ/g, "Κ").replace(/Λ/g, "Λ").replace(/Μ/g, "Μ").replace(/Ν/g, "Ν").replace(/Ξ/g, "Ξ").replace(/Ο/g, "Ο").replace(/Π/g, "Π").replace(/Ρ/g, "Ρ").replace(/Σ/g, "Σ").replace(/Τ/g, "Τ").replace(/Υ/g, "Υ").replace(/Φ/g, "Φ").replace(/Χ/g, "Χ").replace(/Ψ/g, "Ψ").replace(/Ω/g, "Ω").replace(/α/g, "α").replace(/β/g, "β").replace(/γ/g, "γ").replace(/δ/g, "δ").replace(/ε/g, "ε").replace(/ζ/g, "ζ").replace(/η/g, "η").replace(/θ/g, "θ").replace(/ι/g, "ι").replace(/κ/g, "κ").replace(/λ/g, "λ").replace(/μ/g, "μ").replace(/ν/g, "ν").replace(/ξ/g, "ξ").replace(/ο/g, "ο").replace(/&piρ;/g, "ρ").replace(/ρ/g, "ς").replace(/ς/g, "ς").replace(/σ/g, "σ").replace(/τ/g, "τ").replace(/φ/g, "φ").replace(/χ/g, "χ").replace(/ψ/g, "ψ").replace(/ω/g, "ω").replace(/•/g, "•").replace(/…/g, "…").replace(/′/g, "′").replace(/″/g, "″").replace(/‾/g, "‾").replace(/⁄/g, "⁄").replace(/℘/g, "℘").replace(/ℑ/g, "ℑ").replace(/ℜ/g, "ℜ").replace(/™/g, "™").replace(/ℵ/g, "ℵ").replace(/←/g, "←").replace(/↑/g, "↑").replace(/→/g, "→").replace(/↓/g, "↓").replace(/&barr;/g, "↔").replace(/↵/g, "↵").replace(/⇐/g, "⇐").replace(/⇑/g, "⇑").replace(/⇒/g, "⇒").replace(/⇓/g, "⇓").replace(/⇔/g, "⇔").replace(/∀/g, "∀").replace(/∂/g, "∂").replace(/∃/g, "∃").replace(/∅/g, "∅").replace(/∇/g, "∇").replace(/∈/g, "∈").replace(/∉/g, "∉").replace(/∋/g, "∋").replace(/∏/g, "∏").replace(/∑/g, "∑").replace(/−/g, "−").replace(/∗/g, "∗").replace(/√/g, "√").replace(/∝/g, "∝").replace(/∞/g, "∞").replace(/&OEig;/g, "Œ").replace(/œ/g, "œ").replace(/Ÿ/g, "Ÿ").replace(/♠/g, "♠").replace(/♣/g, "♣").replace(/♥/g, "♥").replace(/♦/g, "♦").replace(/ϑ/g, "ϑ").replace(/ϒ/g, "ϒ").replace(/ϖ/g, "ϖ").replace(/Š/g, "Š").replace(/š/g, "š").replace(/∠/g, "∠").replace(/∧/g, "∧").replace(/∨/g, "∨").replace(/∩/g, "∩").replace(/∪/g, "∪").replace(/∫/g, "∫").replace(/∴/g, "∴").replace(/∼/g, "∼").replace(/≅/g, "≅").replace(/≈/g, "≈").replace(/≠/g, "≠").replace(/≡/g, "≡").replace(/≤/g, "≤").replace(/≥/g, "≥").replace(/⊂/g, "⊂").replace(/⊃/g, "⊃").replace(/⊄/g, "⊄").replace(/⊆/g, "⊆").replace(/⊇/g, "⊇").replace(/⊕/g, "⊕").replace(/⊗/g, "⊗").replace(/⊥/g, "⊥").replace(/⋅/g, "⋅").replace(/&lcell;/g, "⌈").replace(/&rcell;/g, "⌉").replace(/⌊/g, "⌊").replace(/⌋/g, "⌋").replace(/〈/g, "⟨").replace(/〉/g, "⟩").replace(/◊/g, "◊").replace(/'/g, "'").replace(/&/g, "&").replace(/"/g, "\"");
}
Used like so:
let decodedText = removeEncoding("Ich heiße David");
console.log(decodedText);
Prints: Ich Heiße David
P.S. this took like an hour and a half to make.
This is the most comprehensive solution I've tried so far:
const STANDARD_HTML_ENTITIES = {
nbsp: String.fromCharCode(160),
amp: "&",
quot: '"',
lt: "<",
gt: ">"
};
const replaceHtmlEntities = plainTextString => {
return plainTextString
.replace(/&#(\d+);/g, (match, dec) => String.fromCharCode(dec))
.replace(
/&(nbsp|amp|quot|lt|gt);/g,
(a, b) => STANDARD_HTML_ENTITIES[b]
);
};
Closures can avoid creating unnecessary objects.
const decodingHandler = (() => {
const element = document.createElement('div');
return text => {
element.innerHTML = text;
return element.textContent;
};
})();
A more concise way
const decodingHandler = (() => {
const element = document.createElement('div');
return text => ((element.innerHTML = text), element.textContent);
})();
I use this in my project: inspired by other answers but with an extra secure parameter, can be useful when you deal with decorated characters
var decodeEntities=(function(){
var el=document.createElement('div');
return function(str, safeEscape){
if(str && typeof str === 'string'){
str=str.replace(/\</g, '<');
el.innerHTML=str;
if(el.innerText){
str=el.innerText;
el.innerText='';
}
else if(el.textContent){
str=el.textContent;
el.textContent='';
}
if(safeEscape)
str=str.replace(/\</g, '<');
}
return str;
}
})();
And it's usable like:
var label='safe <b> character éntity</b>';
var safehtml='<div title="'+decodeEntities(label)+'">'+decodeEntities(label, true)+'</div>';
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
// decode-html.js v1
function decodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.innerHTML = html;
const decodedHtml = textarea.textContent;
textarea.remove();
return decodedHtml;
};
// encode-html.js v1
function encodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.textContent = html;
const encodedHtml = textarea.innerHTML;
textarea.remove();
return encodedHtml;
};
// example of use:
let htmlDecoded = 'one & two & three';
let htmlEncoded = 'one & two & three';
console.log(1, htmlDecoded);
console.log(2, encodeHtml(htmlDecoded));
console.log(3, htmlEncoded);
console.log(4, decodeHtml(htmlEncoded));
All of the other answers here have problems.
The document.createElement('div') methods (including those using jQuery) execute any javascript passed into it (a security issue) and the DOMParser.parseFromString() method trims whitespace. Here is a pure javascript solution that has neither problem:
function htmlDecode(html) {
var textarea = document.createElement("textarea");
html= html.replace(/\r/g, String.fromCharCode(0xe000)); // Replace "\r" with reserved unicode character.
textarea.innerHTML = html;
var result = textarea.value;
return result.replace(new RegExp(String.fromCharCode(0xe000), 'g'), '\r');
}
TextArea is used specifically to avoid executig js code. It passes these:
htmlDecode('<& >'); // returns "<& >" with non-breaking space.
htmlDecode(' '); // returns " "
htmlDecode('<img src="dummy" onerror="alert(\'xss\')">'); // Does not execute alert()
htmlDecode('\r\n') // returns "\r\n", doesn't lose the \r like other solutions.
I have some JavaScript code that communicates with an XML-RPC backend.
The XML-RPC returns strings of the form:
<img src='myimage.jpg'>
However, when I use the JavaScript to insert the strings into HTML, they render literally. I don't see an image, I literally see the string:
<img src='myimage.jpg'>
My guess is that the HTML is being escaped over the XML-RPC channel.
How can I unescape the string in JavaScript? I tried the techniques on this page, unsuccessfully: http://paulschreiber.com/blog/2008/09/20/javascript-how-to-unescape-html-entities/
What are other ways to diagnose the issue?
Most answers given here have a huge disadvantage: if the string you are trying to convert isn't trusted then you will end up with a Cross-Site Scripting (XSS) vulnerability. For the function in the accepted answer, consider the following:
htmlDecode("<img src='dummy' onerror='alert(/xss/)'>");
The string here contains an unescaped HTML tag, so instead of decoding anything the htmlDecode function will actually run JavaScript code specified inside the string.
This can be avoided by using DOMParser which is supported in all modern browsers:
function htmlDecode(input) {
var doc = new DOMParser().parseFromString(input, "text/html");
return doc.documentElement.textContent;
}
console.log( htmlDecode("<img src='myimage.jpg'>") )
// "<img src='myimage.jpg'>"
console.log( htmlDecode("<img src='dummy' onerror='alert(/xss/)'>") )
// ""
This function is guaranteed to not run any JavaScript code as a side-effect. Any HTML tags will be ignored, only text content will be returned.
Compatibility note: Parsing HTML with DOMParser requires at least Chrome 30, Firefox 12, Opera 17, Internet Explorer 10, Safari 7.1 or Microsoft Edge. So all browsers without support are way past their EOL and as of 2017 the only ones that can still be seen in the wild occasionally are older Internet Explorer and Safari versions (usually these still aren't numerous enough to bother).
Do you need to decode all encoded HTML entities or just & itself?
If you only need to handle & then you can do this:
var decoded = encoded.replace(/&/g, '&');
If you need to decode all HTML entities then you can do it without jQuery:
var elem = document.createElement('textarea');
elem.innerHTML = encoded;
var decoded = elem.value;
Please take note of Mark's comments below which highlight security holes in an earlier version of this answer and recommend using textarea rather than div to mitigate against potential XSS vulnerabilities. These vulnerabilities exist whether you use jQuery or plain JavaScript.
EDIT: You should use the DOMParser API as Wladimir suggests, I edited my previous answer since the function posted introduced a security vulnerability.
The following snippet is the old answer's code with a small modification: using a textarea instead of a div reduces the XSS vulnerability, but it is still problematic in IE9 and Firefox.
function htmlDecode(input){
var e = document.createElement('textarea');
e.innerHTML = input;
// handle case of empty input
return e.childNodes.length === 0 ? "" : e.childNodes[0].nodeValue;
}
htmlDecode("<img src='myimage.jpg'>");
// returns "<img src='myimage.jpg'>"
Basically I create a DOM element programmatically, assign the encoded HTML to its innerHTML and retrieve the nodeValue from the text node created on the innerHTML insertion. Since it just creates an element but never adds it, no site HTML is modified.
It will work cross-browser (including older browsers) and accept all the HTML Character Entities.
EDIT: The old version of this code did not work on IE with blank inputs, as evidenced here on jsFiddle (view in IE). The version above works with all inputs.
UPDATE: appears this doesn't work with large string, and it also introduces a security vulnerability, see comments.
A more modern option for interpreting HTML (text and otherwise) from JavaScript is the HTML support in the DOMParser API (see here in MDN). This allows you to use the browser's native HTML parser to convert a string to an HTML document. It has been supported in new versions of all major browsers since late 2014.
If we just want to decode some text content, we can put it as the sole content in a document body, parse the document, and pull out the its .body.textContent.
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
We can see in the draft specification for DOMParser that JavaScript is not enabled for the parsed document, so we can perform this text conversion without security concerns.
The parseFromString(str, type) method must run these steps, depending on type:
"text/html"
Parse str with an HTML parser, and return the newly created Document.
The scripting flag must be set to "disabled".
NOTE
script elements get marked unexecutable and the contents of noscript get parsed as markup.
It's beyond the scope of this question, but please note that if you're taking the parsed DOM nodes themselves (not just their text content) and moving them to the live document DOM, it's possible that their scripting would be reenabled, and there could be security concerns. I haven't researched it, so please exercise caution.
Matthias Bynens has a library for this: https://github.com/mathiasbynens/he
Example:
console.log(
he.decode("Jörg & Jürgen rocked to & fro ")
);
// Logs "Jörg & Jürgen rocked to & fro"
I suggest favouring it over hacks involving setting an element's HTML content and then reading back its text content. Such approaches can work, but are deceptively dangerous and present XSS opportunities if used on untrusted user input.
If you really can't bear to load in a library, you can use the textarea hack described in this answer to a near-duplicate question, which, unlike various similar approaches that have been suggested, has no security holes that I know of:
function decodeEntities(encodedString) {
var textArea = document.createElement('textarea');
textArea.innerHTML = encodedString;
return textArea.value;
}
console.log(decodeEntities('1 & 2')); // '1 & 2'
But take note of the security issues, affecting similar approaches to this one, that I list in the linked answer! This approach is a hack, and future changes to the permissible content of a textarea (or bugs in particular browsers) could lead to code that relies upon it suddenly having an XSS hole one day.
If you're using jQuery:
function htmlDecode(value){
return $('<div/>').html(value).text();
}
Otherwise, use Strictly Software's Encoder Object, which has an excellent htmlDecode() function.
You can use Lodash unescape / escape function https://lodash.com/docs/4.17.5#unescape
import unescape from 'lodash/unescape';
const str = unescape('fred, barney, & pebbles');
str will become 'fred, barney, & pebbles'
var htmlEnDeCode = (function() {
var charToEntityRegex,
entityToCharRegex,
charToEntity,
entityToChar;
function resetCharacterEntities() {
charToEntity = {};
entityToChar = {};
// add the default set
addCharacterEntities({
'&' : '&',
'>' : '>',
'<' : '<',
'"' : '"',
''' : "'"
});
}
function addCharacterEntities(newEntities) {
var charKeys = [],
entityKeys = [],
key, echar;
for (key in newEntities) {
echar = newEntities[key];
entityToChar[key] = echar;
charToEntity[echar] = key;
charKeys.push(echar);
entityKeys.push(key);
}
charToEntityRegex = new RegExp('(' + charKeys.join('|') + ')', 'g');
entityToCharRegex = new RegExp('(' + entityKeys.join('|') + '|&#[0-9]{1,5};' + ')', 'g');
}
function htmlEncode(value){
var htmlEncodeReplaceFn = function(match, capture) {
return charToEntity[capture];
};
return (!value) ? value : String(value).replace(charToEntityRegex, htmlEncodeReplaceFn);
}
function htmlDecode(value) {
var htmlDecodeReplaceFn = function(match, capture) {
return (capture in entityToChar) ? entityToChar[capture] : String.fromCharCode(parseInt(capture.substr(2), 10));
};
return (!value) ? value : String(value).replace(entityToCharRegex, htmlDecodeReplaceFn);
}
resetCharacterEntities();
return {
htmlEncode: htmlEncode,
htmlDecode: htmlDecode
};
})();
This is from ExtJS source code.
The trick is to use the power of the browser to decode the special HTML characters, but not allow the browser to execute the results as if it was actual html... This function uses a regex to identify and replace encoded HTML characters, one character at a time.
function unescapeHtml(html) {
var el = document.createElement('div');
return html.replace(/\&[#0-9a-z]+;/gi, function (enc) {
el.innerHTML = enc;
return el.innerText
});
}
element.innerText also does the trick.
In case you're looking for it, like me - meanwhile there's a nice and safe JQuery method.
https://api.jquery.com/jquery.parsehtml/
You can f.ex. type this in your console:
var x = "test &";
> undefined
$.parseHTML(x)[0].textContent
> "test &"
So $.parseHTML(x) returns an array, and if you have HTML markup within your text, the array.length will be greater than 1.
jQuery will encode and decode for you. However, you need to use a textarea tag, not a div.
var str1 = 'One & two & three';
var str2 = "One & two & three";
$(document).ready(function() {
$("#encoded").text(htmlEncode(str1));
$("#decoded").text(htmlDecode(str2));
});
function htmlDecode(value) {
return $("<textarea/>").html(value).text();
}
function htmlEncode(value) {
return $('<textarea/>').text(value).html();
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
<div id="encoded"></div>
<div id="decoded"></div>
CMS' answer works fine, unless the HTML you want to unescape is very long, longer than 65536 chars. Because then in Chrome the inner HTML gets split into many child nodes, each one at most 65536 long, and you need to concatenate them. This function works also for very long strings:
function unencodeHtmlContent(escapedHtml) {
var elem = document.createElement('div');
elem.innerHTML = escapedHtml;
var result = '';
// Chrome splits innerHTML into many child nodes, each one at most 65536.
// Whereas FF creates just one single huge child node.
for (var i = 0; i < elem.childNodes.length; ++i) {
result = result + elem.childNodes[i].nodeValue;
}
return result;
}
See this answer about innerHTML max length for more info: https://stackoverflow.com/a/27545633/694469
To unescape HTML entities* in JavaScript you can use small library html-escaper: npm install html-escaper
import {unescape} from 'html-escaper';
unescape('escaped string');
Or unescape function from Lodash or Underscore, if you are using it.
*) please note that these functions don't cover all HTML entities, but only the most common ones, i.e. &, <, >, ', ". To unescape all HTML entities you can use he library.
First create a <span id="decodeIt" style="display:none;"></span> somewhere in the body
Next, assign the string to be decoded as innerHTML to this:
document.getElementById("decodeIt").innerHTML=stringtodecode
Finally,
stringtodecode=document.getElementById("decodeIt").innerText
Here is the overall code:
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
The question doesn't specify the origin of x but it makes sense to defend, if we can, against malicious (or just unexpected, from our own application) input. For example, suppose x has a value of & <script>alert('hello');</script>. A safe and simple way to handle this in jQuery is:
var x = "& <script>alert('hello');</script>";
var safe = $('<div />').html(x).text();
// => "& alert('hello');"
Found via https://gist.github.com/jmblog/3222899. I can't see many reasons to avoid using this solution given it is at least as short, if not shorter than some alternatives and provides defence against XSS.
(I originally posted this as a comment, but am adding it as an answer since a subsequent comment in the same thread requested that I do so).
Not a direct response to your question, but wouldn't it be better for your RPC to return some structure (be it XML or JSON or whatever) with those image data (urls in your example) inside that structure?
Then you could just parse it in your javascript and build the <img> using javascript itself.
The structure you recieve from RPC could look like:
{"img" : ["myimage.jpg", "myimage2.jpg"]}
I think it's better this way, as injecting a code that comes from external source into your page doesn't look very secure. Imaging someone hijacking your XML-RPC script and putting something you wouldn't want in there (even some javascript...)
For one-line guys:
const htmlDecode = innerHTML => Object.assign(document.createElement('textarea'), {innerHTML}).value;
console.log(htmlDecode('Complicated - Dimitri Vegas & Like Mike'));
You're welcome...just a messenger...full credit goes to ourcodeworld.com, link below.
window.htmlentities = {
/**
* Converts a string to its html characters completely.
*
* #param {String} str String with unescaped HTML characters
**/
encode : function(str) {
var buf = [];
for (var i=str.length-1;i>=0;i--) {
buf.unshift(['&#', str[i].charCodeAt(), ';'].join(''));
}
return buf.join('');
},
/**
* Converts an html characterSet into its original character.
*
* #param {String} str htmlSet entities
**/
decode : function(str) {
return str.replace(/&#(\d+);/g, function(match, dec) {
return String.fromCharCode(dec);
});
}
};
Full Credit: https://ourcodeworld.com/articles/read/188/encode-and-decode-html-entities-using-pure-javascript
I know there are a lot of good answers here, but since I have implemented a bit different approach, I thought to share.
This code is a perfectly safe security-wise approach, as the escaping handler dependant on the browser, instead on the function. So, if a new vulnerability will be discovered in the future, this solution will be covered.
const decodeHTMLEntities = text => {
// Create a new element or use one from cache, to save some element creation overhead
const el = decodeHTMLEntities.__cache_data_element
= decodeHTMLEntities.__cache_data_element
|| document.createElement('div');
const enc = text
// Prevent any mixup of existing pattern in text
.replace(/⪪/g, '⪪#')
// Encode entities in special format. This will prevent native element encoder to replace any amp characters
.replace(/&([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+);/gi, '⪪$1⪫');
// Encode any HTML tags in the text to prevent script injection
el.textContent = enc;
// Decode entities from special format, back to their original HTML entities format
el.innerHTML = el.innerHTML
.replace(/⪪([a-z1-8]{2,31}|#x[0-9a-f]+|#\d+)⪫/gi, '&$1;')
.replace(/#⪫/g, '⪫');
// Get the decoded HTML entities
const dec = el.textContent;
// Clear the element content, in order to preserve a bit of memory (it is just the text may be pretty big)
el.textContent = '';
return dec;
}
// Example
console.log(decodeHTMLEntities("<script>alert('∳∳∳∳⪪#x02233⪫');</script>"));
// Prints: <script>alert('∳∳∳∳⪪##x02233⪫');</script>
By the way, I have chosen to use the characters ⪪ and ⪫, because they are rarely used, so the chance of impacting the performance by matching them is significantly lower.
Chris answer is nice & elegant but it fails if value is undefined. Just simple improvement makes it solid:
function htmlDecode(value) {
return (typeof value === 'undefined') ? '' : $('<div/>').html(value).text();
}
a javascript solution that catches the common ones:
var map = {amp: '&', lt: '<', gt: '>', quot: '"', '#039': "'"}
str = str.replace(/&([^;]+);/g, (m, c) => map[c])
this is the reverse of https://stackoverflow.com/a/4835406/2738039
I tried everything to remove & from a JSON array. None of the above examples, but https://stackoverflow.com/users/2030321/chris gave a great solution that led me to fix my problem.
var stringtodecode="<B>Hello</B> world<br>";
document.getElementById("decodeIt").innerHTML=stringtodecode;
stringtodecode=document.getElementById("decodeIt").innerText
I did not use, because I did not understand how to insert it into a modal window that was pulling JSON data into an array, but I did try this based upon the example, and it worked:
var modal = document.getElementById('demodal');
$('#ampersandcontent').text(replaceAll(data[0],"&", "&"));
I like it because it was simple, and it works, but not sure why it's not widely used. Searched hi & low to find a simple solution.
I continue to seek understanding of the syntax, and if there is any risk to using this. Have not found anything yet.
I was crazy enough to go through and make this function that should be pretty, if not completely, exhaustive:
function removeEncoding(string) {
return string.replace(/À/g, "À").replace(/Á/g, "Á").replace(/Â/g, "Â").replace(/Ã/g, "Ã").replace(/Ä/g, "Ä").replace(/Å/g, "Å").replace(/à/g, "à").replace(/â/g, "â").replace(/ã/g, "ã").replace(/ä/g, "ä").replace(/å/g, "å").replace(/Æ/g, "Æ").replace(/æ/g, "æ").replace(/ß/g, "ß").replace(/Ç/g, "Ç").replace(/ç/g, "ç").replace(/È/g, "È").replace(/É/g, "É").replace(/Ê/g, "Ê").replace(/Ë/g, "Ë").replace(/è/g, "è").replace(/é/g, "é").replace(/ê/g, "ê").replace(/ë/g, "ë").replace(//g, "ƒ").replace(/Ì/g, "Ì").replace(/Í/g, "Í").replace(/Î/g, "Î").replace(/Ï/g, "Ï").replace(/ì/g, "ì").replace(/í/g, "í").replace(/î/g, "î").replace(/ï/g, "ï").replace(/Ñ/g, "Ñ").replace(/ñ/g, "ñ").replace(/Ò/g, "Ò").replace(/Ó/g, "Ó").replace(/Ô/g, "Ô").replace(/Õ/g, "Õ").replace(/Ö/g, "Ö").replace(/ò/g, "ò").replace(/ó/g, "ó").replace(/ô/g, "ô").replace(/õ/g, "õ").replace(/ö/g, "ö").replace(/Ø/g, "Ø").replace(/ø/g, "ø").replace(//g, "Œ").replace(//g, "œ").replace(//g, "Š").replace(//g, "š").replace(/Ù/g, "Ù").replace(/Ú/g, "Ú").replace(/Û/g, "Û").replace(/Ü/g, "Ü").replace(/ù/g, "ù").replace(/ú/g, "ú").replace(/û/g, "û").replace(/ü/g, "ü").replace(/µ/g, "µ").replace(/×/g, "×").replace(/Ý/g, "Ý").replace(//g, "Ÿ").replace(/ý/g, "ý").replace(/ÿ/g, "ÿ").replace(/°/g, "°").replace(//g, "†").replace(//g, "‡").replace(/</g, "<").replace(/>/g, ">").replace(/±/g, "±").replace(/«/g, "«").replace(/»/g, "»").replace(/¿/g, "¿").replace(/¡/g, "¡").replace(/·/g, "·").replace(//g, "•").replace(//g, "™").replace(/©/g, "©").replace(/®/g, "®").replace(/§/g, "§").replace(/¶/g, "¶").replace(/Α/g, "Α").replace(/Β/g, "Β").replace(/Γ/g, "Γ").replace(/Δ/g, "Δ").replace(/Ε/g, "Ε").replace(/Ζ/g, "Ζ").replace(/Η/g, "Η").replace(/Θ/g, "Θ").replace(/Ι/g, "Ι").replace(/Κ/g, "Κ").replace(/Λ/g, "Λ").replace(/Μ/g, "Μ").replace(/Ν/g, "Ν").replace(/Ξ/g, "Ξ").replace(/Ο/g, "Ο").replace(/Π/g, "Π").replace(/Ρ/g, "Ρ").replace(/Σ/g, "Σ").replace(/Τ/g, "Τ").replace(/Υ/g, "Υ").replace(/Φ/g, "Φ").replace(/Χ/g, "Χ").replace(/Ψ/g, "Ψ").replace(/Ω/g, "Ω").replace(/α/g, "α").replace(/β/g, "β").replace(/γ/g, "γ").replace(/δ/g, "δ").replace(/ε/g, "ε").replace(/ζ/g, "ζ").replace(/η/g, "η").replace(/θ/g, "θ").replace(/ι/g, "ι").replace(/κ/g, "κ").replace(/λ/g, "λ").replace(/μ/g, "μ").replace(/ν/g, "ν").replace(/ξ/g, "ξ").replace(/ο/g, "ο").replace(/&piρ;/g, "ρ").replace(/ρ/g, "ς").replace(/ς/g, "ς").replace(/σ/g, "σ").replace(/τ/g, "τ").replace(/φ/g, "φ").replace(/χ/g, "χ").replace(/ψ/g, "ψ").replace(/ω/g, "ω").replace(/•/g, "•").replace(/…/g, "…").replace(/′/g, "′").replace(/″/g, "″").replace(/‾/g, "‾").replace(/⁄/g, "⁄").replace(/℘/g, "℘").replace(/ℑ/g, "ℑ").replace(/ℜ/g, "ℜ").replace(/™/g, "™").replace(/ℵ/g, "ℵ").replace(/←/g, "←").replace(/↑/g, "↑").replace(/→/g, "→").replace(/↓/g, "↓").replace(/&barr;/g, "↔").replace(/↵/g, "↵").replace(/⇐/g, "⇐").replace(/⇑/g, "⇑").replace(/⇒/g, "⇒").replace(/⇓/g, "⇓").replace(/⇔/g, "⇔").replace(/∀/g, "∀").replace(/∂/g, "∂").replace(/∃/g, "∃").replace(/∅/g, "∅").replace(/∇/g, "∇").replace(/∈/g, "∈").replace(/∉/g, "∉").replace(/∋/g, "∋").replace(/∏/g, "∏").replace(/∑/g, "∑").replace(/−/g, "−").replace(/∗/g, "∗").replace(/√/g, "√").replace(/∝/g, "∝").replace(/∞/g, "∞").replace(/&OEig;/g, "Œ").replace(/œ/g, "œ").replace(/Ÿ/g, "Ÿ").replace(/♠/g, "♠").replace(/♣/g, "♣").replace(/♥/g, "♥").replace(/♦/g, "♦").replace(/ϑ/g, "ϑ").replace(/ϒ/g, "ϒ").replace(/ϖ/g, "ϖ").replace(/Š/g, "Š").replace(/š/g, "š").replace(/∠/g, "∠").replace(/∧/g, "∧").replace(/∨/g, "∨").replace(/∩/g, "∩").replace(/∪/g, "∪").replace(/∫/g, "∫").replace(/∴/g, "∴").replace(/∼/g, "∼").replace(/≅/g, "≅").replace(/≈/g, "≈").replace(/≠/g, "≠").replace(/≡/g, "≡").replace(/≤/g, "≤").replace(/≥/g, "≥").replace(/⊂/g, "⊂").replace(/⊃/g, "⊃").replace(/⊄/g, "⊄").replace(/⊆/g, "⊆").replace(/⊇/g, "⊇").replace(/⊕/g, "⊕").replace(/⊗/g, "⊗").replace(/⊥/g, "⊥").replace(/⋅/g, "⋅").replace(/&lcell;/g, "⌈").replace(/&rcell;/g, "⌉").replace(/⌊/g, "⌊").replace(/⌋/g, "⌋").replace(/〈/g, "⟨").replace(/〉/g, "⟩").replace(/◊/g, "◊").replace(/'/g, "'").replace(/&/g, "&").replace(/"/g, "\"");
}
Used like so:
let decodedText = removeEncoding("Ich heiße David");
console.log(decodedText);
Prints: Ich Heiße David
P.S. this took like an hour and a half to make.
This is the most comprehensive solution I've tried so far:
const STANDARD_HTML_ENTITIES = {
nbsp: String.fromCharCode(160),
amp: "&",
quot: '"',
lt: "<",
gt: ">"
};
const replaceHtmlEntities = plainTextString => {
return plainTextString
.replace(/&#(\d+);/g, (match, dec) => String.fromCharCode(dec))
.replace(
/&(nbsp|amp|quot|lt|gt);/g,
(a, b) => STANDARD_HTML_ENTITIES[b]
);
};
Closures can avoid creating unnecessary objects.
const decodingHandler = (() => {
const element = document.createElement('div');
return text => {
element.innerHTML = text;
return element.textContent;
};
})();
A more concise way
const decodingHandler = (() => {
const element = document.createElement('div');
return text => ((element.innerHTML = text), element.textContent);
})();
I use this in my project: inspired by other answers but with an extra secure parameter, can be useful when you deal with decorated characters
var decodeEntities=(function(){
var el=document.createElement('div');
return function(str, safeEscape){
if(str && typeof str === 'string'){
str=str.replace(/\</g, '<');
el.innerHTML=str;
if(el.innerText){
str=el.innerText;
el.innerText='';
}
else if(el.textContent){
str=el.textContent;
el.textContent='';
}
if(safeEscape)
str=str.replace(/\</g, '<');
}
return str;
}
})();
And it's usable like:
var label='safe <b> character éntity</b>';
var safehtml='<div title="'+decodeEntities(label)+'">'+decodeEntities(label, true)+'</div>';
var encodedStr = 'hello & world';
var parser = new DOMParser;
var dom = parser.parseFromString(
'<!doctype html><body>' + encodedStr,
'text/html');
var decodedString = dom.body.textContent;
console.log(decodedString);
// decode-html.js v1
function decodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.innerHTML = html;
const decodedHtml = textarea.textContent;
textarea.remove();
return decodedHtml;
};
// encode-html.js v1
function encodeHtml(html) {
const textarea = document.createElement('textarea');
textarea.textContent = html;
const encodedHtml = textarea.innerHTML;
textarea.remove();
return encodedHtml;
};
// example of use:
let htmlDecoded = 'one & two & three';
let htmlEncoded = 'one & two & three';
console.log(1, htmlDecoded);
console.log(2, encodeHtml(htmlDecoded));
console.log(3, htmlEncoded);
console.log(4, decodeHtml(htmlEncoded));
All of the other answers here have problems.
The document.createElement('div') methods (including those using jQuery) execute any javascript passed into it (a security issue) and the DOMParser.parseFromString() method trims whitespace. Here is a pure javascript solution that has neither problem:
function htmlDecode(html) {
var textarea = document.createElement("textarea");
html= html.replace(/\r/g, String.fromCharCode(0xe000)); // Replace "\r" with reserved unicode character.
textarea.innerHTML = html;
var result = textarea.value;
return result.replace(new RegExp(String.fromCharCode(0xe000), 'g'), '\r');
}
TextArea is used specifically to avoid executig js code. It passes these:
htmlDecode('<& >'); // returns "<& >" with non-breaking space.
htmlDecode(' '); // returns " "
htmlDecode('<img src="dummy" onerror="alert(\'xss\')">'); // Does not execute alert()
htmlDecode('\r\n') // returns "\r\n", doesn't lose the \r like other solutions.
I am writing a support chat application where I want text to be parsed for urls. I have found answers for similar questions but nothing for the following.
what i have
function ReplaceUrlToAnchors(text) {
var exp = /(\b(https?:\/\/|ftp:\/\/|file:\/\/|www.)
[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig;
return text.replace(exp,"<a href='$1' target='_blank'>$1</a>");
}
that pattern is a modified version of one i found on the internet. It includes www. in the first token, because not all urls start with protocol:// However, when www.google.com is replaced with
<a href='www.google.com' target='_blank'>www.google.com</a>
which pulls up MySite.com/webchat/wwww.google.com and I get a 404
that is my first problem, my second is...
in my script for generating messages to the log, I am forced to do it a hacky way:
var last = 0;
function UpdateChatWindow(msgArray) {
var chat = $get("MessageLog");
for (var i = 0; i < msgArray.length; i++) {
var element = document.createElement("div");
var linkified = ReplaceUrlToAnchors(msgArray[i]);
element.setAttribute("id", last.toString());
element.innerHTML = linkified;
chat.appendChild(element);
last = last + 1;
}
}
To get the "linkified" string to render HTML out correctly I have to use the non-standard .innerHTML attribute of element. I would prefer a way were i could parse the string as tokens - text tokens and anchor tokens - and call either createTextNode or createElement("a") and stitch them together with DOM.
so question 1 is how should I go about www.site.com parsing, or even site.com?
and question 2 is how would could I do this using only DOM?
Another thing you could do is this:
function ReplaceUrlToAnchors(text) {
var exp = /(\b(https?:\/\/|ftp:\/\/|file:\/\/|www.)
[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig;
return text.replace(exp, function(_, url) {
return '<a href="' +
(/^www\./.test(url) ? "http://" + url : url) +
'target="_blank">' +
url +
'</a>';
});
}
That is kind-of like your solution, but it does the check for "www" URLs in that callback passed in to ".replace()".
Note that you won't be picking up "stackoverflow.com" or "newegg.com" or anything like that, which I understand may be unavoidable (and even desirable, given the false positives you'd pick up).
Here is what I came up with, perhaps someone has something better?
function replaceUrlToAnchors(text) {
var naked = /(\b(www.)[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|](.com|.net|.org|.co.uk|.ca|.))/ig;
text = text.replace(naked, "http://$1");
var exp = /(\b(https?:\/\/|ftp:\/\/|file:\/\/)([-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|]))/ig;
return text.replace(exp,"<a href='$1' target='_blank'>$3</a>");
}
the first regex will replace www.google.com with http://www.google.com and is good enough for what I am doing. However, I will hold off marking this as the answer because I would also like to make (www.) optional but when I do (www.)? it replaces every word with http://word/