Related
Basically, what I wish to achieve is to trigger an event when the user navigates the page. I've seen many solutions out there that seem kind of hacky, so here's one of the solutions I have adopted (I'm open to better solutions as long as it works for the majority of apps, not just SPAs):
window.addEventListener("beforeunload", (event) => {
this.save() // <- This function is meant to save the state of the current page
});
The this.save() Method :
save = () => {
const currentUrl = window.location.href
this.flowState.push({ // <- Storing it in an array before saving the entire thing to sessionStorage
url: currentUrl,
});
sessionStorage.setItem('FLOWSTATE', JSON.stringify(this.flowState))
}
The problem is, this solution saves the target URL instead of the source URL, which introduces bugs to my program. Is there a good way to solve this in 2020?
var url = window.location;
console.log(url);
It will show you exactly what you are looking for.
Is there a way I can modify the URL of the current page without reloading the page?
I would like to access the portion before the # hash if possible.
I only need to change the portion after the domain, so it's not like I'm violating cross-domain policies.
window.location.href = "www.mysite.com/page2.php"; // this reloads
This can now be done in Chrome, Safari, Firefox 4+, and Internet Explorer 10pp4+!
See this question's answer for more information:
Updating address bar with new URL without hash or reloading the page
Example:
function processAjaxData(response, urlPath){
document.getElementById("content").innerHTML = response.html;
document.title = response.pageTitle;
window.history.pushState({"html":response.html,"pageTitle":response.pageTitle},"", urlPath);
}
You can then use window.onpopstate to detect the back/forward button navigation:
window.onpopstate = function(e){
if(e.state){
document.getElementById("content").innerHTML = e.state.html;
document.title = e.state.pageTitle;
}
};
For a more in-depth look at manipulating browser history, see this MDN article.
HTML5 introduced the history.pushState() and history.replaceState() methods, which allow you to add and modify history entries, respectively.
window.history.pushState('page2', 'Title', '/page2.php');
Read more about this from here
You can also use HTML5 replaceState if you want to change the url but don't want to add the entry to the browser history:
if (window.history.replaceState) {
//prevents browser from storing history with each change:
window.history.replaceState(statedata, title, url);
}
This would 'break' the back button functionality. This may be required in some instances such as an image gallery (where you want the back button to return back to the gallery index page instead of moving back through each and every image you viewed) whilst giving each image its own unique url.
Here is my solution (newUrl is your new URL which you want to replace with the current one):
history.pushState({}, null, newUrl);
NOTE: If you are working with an HTML5 browser then you should ignore this answer. This is now possible as can be seen in the other answers.
There is no way to modify the URL in the browser without reloading the page. The URL represents what the last loaded page was. If you change it (document.location) then it will reload the page.
One obvious reason being, you write a site on www.mysite.com that looks like a bank login page. Then you change the browser URL bar to say www.mybank.com. The user will be totally unaware that they are really looking at www.mysite.com.
parent.location.hash = "hello";
In modern browsers and HTML5, there is a method called pushState on window history. That will change the URL and push it to the history without loading the page.
You can use it like this, it will take 3 parameters, 1) state object 2) title and a URL):
window.history.pushState({page: "another"}, "another page", "example.html");
This will change the URL, but not reload the page. Also, it doesn't check if the page exists, so if you do some JavaScript code that is reacting to the URL, you can work with them like this.
Also, there is history.replaceState() which does exactly the same thing, except it will modify the current history instead of creating a new one!
Also you can create a function to check if history.pushState exist, then carry on with the rest like this:
function goTo(page, title, url) {
if ("undefined" !== typeof history.pushState) {
history.pushState({page: page}, title, url);
} else {
window.location.assign(url);
}
}
goTo("another page", "example", 'example.html');
Also, you can change the # for <HTML5 browsers, which won't reload the page. That's the way Angular uses to do SPA according to hashtag...
Changing # is quite easy, doing like:
window.location.hash = "example";
And you can detect it like this:
window.onhashchange = function () {
console.log("#changed", window.location.hash);
}
The HTML5 replaceState is the answer, as already mentioned by Vivart and geo1701. However it is not supported in all browsers/versions.
History.js wraps HTML5 state features and provides additional support for HTML4 browsers.
Before HTML5 we can use:
parent.location.hash = "hello";
and:
window.location.replace("http:www.example.com");
This method will reload your page, but HTML5 introduced the history.pushState(page, caption, replace_url) that should not reload your page.
If what you're trying to do is allow users to bookmark/share pages, and you don't need it to be exactly the right URL, and you're not using hash anchors for anything else, then you can do this in two parts; you use the location. hash discussed above, and then implement a check on the home page, to look for a URL with a hash anchor in it, and redirect you to the subsequent result.
For instance:
User is on www.site.com/section/page/4
User does some action which changes the URL to www.site.com/#/section/page/6 (with the hash). Say you've loaded the correct content for page 6 into the page, so apart from the hash the user is not too disturbed.
User passes this URL on to someone else, or bookmarks it
Someone else, or the same user at a later date, goes to www.site.com/#/section/page/6
Code on www.site.com/ redirects the user to www.site.com/section/page/6, using something like this:
if (window.location.hash.length > 0){
window.location = window.location.hash.substring(1);
}
Hope that makes sense! It's a useful approach for some situations.
Below is the function to change the URL without reloading the page. It is only supported for HTML5.
function ChangeUrl(page, url) {
if (typeof (history.pushState) != "undefined") {
var obj = {Page: page, Url: url};
history.pushState(obj, obj.Page, obj.Url);
} else {
window.location.href = "homePage";
// alert("Browser does not support HTML5.");
}
}
ChangeUrl('Page1', 'homePage');
You can use this beautiful and simple function to do so anywhere on your application.
function changeurl(url, title) {
var new_url = '/' + url;
window.history.pushState('data', title, new_url);
}
You can not only edit the URL but you can update the title along with it.
Any changes of the loction (either window.location or document.location) will cause a request on that new URL, if you’re not just changing the URL fragment. If you change the URL, you change the URL.
Use server-side URL rewrite techniques like Apache’s mod_rewrite if you don’t like the URLs you are currently using.
You can add anchor tags. I use this on my site so that I can track with Google Analytics what people are visiting on the page.
I just add an anchor tag and then the part of the page I want to track:
var trackCode = "/#" + urlencode($("myDiv").text());
window.location.href = "http://www.piano-chords.net" + trackCode;
pageTracker._trackPageview(trackCode);
As pointed out by Thomas Stjernegaard Jeppesen, you could use History.js to modify URL parameters whilst the user navigates through your Ajax links and apps.
Almost an year has passed since that answer, and History.js grew and became more stable and cross-browser. Now it can be used to manage history states in HTML5-compliant as well as in many HTML4-only browsers. In this demo You can see an example of how it works (as well as being able to try its functionalities and limits.
Should you need any help in how to use and implement this library, i suggest you to take a look at the source code of the demo page: you will see it's very easy to do.
Finally, for a comprehensive explanation of what can be the issues about using hashes (and hashbangs), check out this link by Benjamin Lupton.
Use history.pushState() from the HTML 5 History API.
Refer to the HTML5 History API for more details.
Your new url.
let newUrlIS = window.location.origin + '/user/profile/management';
In a sense, calling pushState() is similar to setting window.location = "#foo", in that both will also create and activate another history entry associated with the current document. But pushState() has a few advantages:
history.pushState({}, null, newUrlIS);
You can check out the root: https://developer.mozilla.org/en-US/docs/Web/API/History_API
This code works for me. I used it into my application in ajax.
history.pushState({ foo: 'bar' }, '', '/bank');
Once a page load into an ID using ajax, It does change the browser url automatically without reloading the page.
This is ajax function bellow.
function showData(){
$.ajax({
type: "POST",
url: "Bank.php",
data: {},
success: function(html){
$("#viewpage").html(html).show();
$("#viewpage").css("margin-left","0px");
}
});
}
Example: From any page or controller like "Dashboard", When I click on the bank, it loads bank list using the ajax code without reloading the page. At this time, browser URL will not be changed.
history.pushState({ foo: 'bar' }, '', '/bank');
But when I use this code into the ajax, it change the browser url without reloading the page.
This is the full ajax code here in the bellow.
function showData(){
$.ajax({
type: "POST",
url: "Bank.php",
data: {},
success: function(html){
$("#viewpage").html(html).show();
$("#viewpage").css("margin-left","0px");
history.pushState({ foo: 'bar' }, '', '/bank');
}
});
}
This is all you will need to navigate without reload
// add setting without reload
location.hash = "setting";
// if url change with hash do somthing
window.addEventListener('hashchange', () => {
console.log('url hash changed!');
});
// if url change do somthing (dont detect changes with hash)
//window.addEventListener('locationchange', function(){
// console.log('url changed!');
//})
// remove #setting without reload
history.back();
Simply use, it will not reload the page, but just the URL :
$('#form_name').attr('action', '/shop/index.htm').submit();
I have a web-app in NodeJS that make certain redirects in sometimes using the method meta refresh. The problem is that this method are incompatible with Firefox (in Firefox not work meta refresh). And I need that the redirect goes well in all browsers and versions. I understand that the best way is use window.location method, is right?
The structure of the code that make the actual redirect is:
module.exports = (outcome) => {
return "(function(document) {"+
"var meta = document.createElement('meta');"+
"meta.setAttribute('http-equiv', 'refresh');"+
"meta.setAttribute('content', '0;URL=" + outcome + "');"+
"document.head.appendChild(meta);"+
"})(document);";
}
How would the final code with the window.location method?
Thank you very much!
You can use window.location.href.
A simple example would be:
window.location.href = 'http://example.com';
Or wrapped in your function:
module.exports = (outcome) => {
return "(function(document) {"+
"window.location.href='" + outcome + "';"+
"})(document);";
}
Is there a way I can modify the URL of the current page without reloading the page?
I would like to access the portion before the # hash if possible.
I only need to change the portion after the domain, so it's not like I'm violating cross-domain policies.
window.location.href = "www.mysite.com/page2.php"; // this reloads
This can now be done in Chrome, Safari, Firefox 4+, and Internet Explorer 10pp4+!
See this question's answer for more information:
Updating address bar with new URL without hash or reloading the page
Example:
function processAjaxData(response, urlPath){
document.getElementById("content").innerHTML = response.html;
document.title = response.pageTitle;
window.history.pushState({"html":response.html,"pageTitle":response.pageTitle},"", urlPath);
}
You can then use window.onpopstate to detect the back/forward button navigation:
window.onpopstate = function(e){
if(e.state){
document.getElementById("content").innerHTML = e.state.html;
document.title = e.state.pageTitle;
}
};
For a more in-depth look at manipulating browser history, see this MDN article.
HTML5 introduced the history.pushState() and history.replaceState() methods, which allow you to add and modify history entries, respectively.
window.history.pushState('page2', 'Title', '/page2.php');
Read more about this from here
You can also use HTML5 replaceState if you want to change the url but don't want to add the entry to the browser history:
if (window.history.replaceState) {
//prevents browser from storing history with each change:
window.history.replaceState(statedata, title, url);
}
This would 'break' the back button functionality. This may be required in some instances such as an image gallery (where you want the back button to return back to the gallery index page instead of moving back through each and every image you viewed) whilst giving each image its own unique url.
Here is my solution (newUrl is your new URL which you want to replace with the current one):
history.pushState({}, null, newUrl);
NOTE: If you are working with an HTML5 browser then you should ignore this answer. This is now possible as can be seen in the other answers.
There is no way to modify the URL in the browser without reloading the page. The URL represents what the last loaded page was. If you change it (document.location) then it will reload the page.
One obvious reason being, you write a site on www.mysite.com that looks like a bank login page. Then you change the browser URL bar to say www.mybank.com. The user will be totally unaware that they are really looking at www.mysite.com.
parent.location.hash = "hello";
In modern browsers and HTML5, there is a method called pushState on window history. That will change the URL and push it to the history without loading the page.
You can use it like this, it will take 3 parameters, 1) state object 2) title and a URL):
window.history.pushState({page: "another"}, "another page", "example.html");
This will change the URL, but not reload the page. Also, it doesn't check if the page exists, so if you do some JavaScript code that is reacting to the URL, you can work with them like this.
Also, there is history.replaceState() which does exactly the same thing, except it will modify the current history instead of creating a new one!
Also you can create a function to check if history.pushState exist, then carry on with the rest like this:
function goTo(page, title, url) {
if ("undefined" !== typeof history.pushState) {
history.pushState({page: page}, title, url);
} else {
window.location.assign(url);
}
}
goTo("another page", "example", 'example.html');
Also, you can change the # for <HTML5 browsers, which won't reload the page. That's the way Angular uses to do SPA according to hashtag...
Changing # is quite easy, doing like:
window.location.hash = "example";
And you can detect it like this:
window.onhashchange = function () {
console.log("#changed", window.location.hash);
}
The HTML5 replaceState is the answer, as already mentioned by Vivart and geo1701. However it is not supported in all browsers/versions.
History.js wraps HTML5 state features and provides additional support for HTML4 browsers.
Before HTML5 we can use:
parent.location.hash = "hello";
and:
window.location.replace("http:www.example.com");
This method will reload your page, but HTML5 introduced the history.pushState(page, caption, replace_url) that should not reload your page.
If what you're trying to do is allow users to bookmark/share pages, and you don't need it to be exactly the right URL, and you're not using hash anchors for anything else, then you can do this in two parts; you use the location. hash discussed above, and then implement a check on the home page, to look for a URL with a hash anchor in it, and redirect you to the subsequent result.
For instance:
User is on www.site.com/section/page/4
User does some action which changes the URL to www.site.com/#/section/page/6 (with the hash). Say you've loaded the correct content for page 6 into the page, so apart from the hash the user is not too disturbed.
User passes this URL on to someone else, or bookmarks it
Someone else, or the same user at a later date, goes to www.site.com/#/section/page/6
Code on www.site.com/ redirects the user to www.site.com/section/page/6, using something like this:
if (window.location.hash.length > 0){
window.location = window.location.hash.substring(1);
}
Hope that makes sense! It's a useful approach for some situations.
Below is the function to change the URL without reloading the page. It is only supported for HTML5.
function ChangeUrl(page, url) {
if (typeof (history.pushState) != "undefined") {
var obj = {Page: page, Url: url};
history.pushState(obj, obj.Page, obj.Url);
} else {
window.location.href = "homePage";
// alert("Browser does not support HTML5.");
}
}
ChangeUrl('Page1', 'homePage');
You can use this beautiful and simple function to do so anywhere on your application.
function changeurl(url, title) {
var new_url = '/' + url;
window.history.pushState('data', title, new_url);
}
You can not only edit the URL but you can update the title along with it.
Any changes of the loction (either window.location or document.location) will cause a request on that new URL, if you’re not just changing the URL fragment. If you change the URL, you change the URL.
Use server-side URL rewrite techniques like Apache’s mod_rewrite if you don’t like the URLs you are currently using.
You can add anchor tags. I use this on my site so that I can track with Google Analytics what people are visiting on the page.
I just add an anchor tag and then the part of the page I want to track:
var trackCode = "/#" + urlencode($("myDiv").text());
window.location.href = "http://www.piano-chords.net" + trackCode;
pageTracker._trackPageview(trackCode);
As pointed out by Thomas Stjernegaard Jeppesen, you could use History.js to modify URL parameters whilst the user navigates through your Ajax links and apps.
Almost an year has passed since that answer, and History.js grew and became more stable and cross-browser. Now it can be used to manage history states in HTML5-compliant as well as in many HTML4-only browsers. In this demo You can see an example of how it works (as well as being able to try its functionalities and limits.
Should you need any help in how to use and implement this library, i suggest you to take a look at the source code of the demo page: you will see it's very easy to do.
Finally, for a comprehensive explanation of what can be the issues about using hashes (and hashbangs), check out this link by Benjamin Lupton.
Use history.pushState() from the HTML 5 History API.
Refer to the HTML5 History API for more details.
Your new url.
let newUrlIS = window.location.origin + '/user/profile/management';
In a sense, calling pushState() is similar to setting window.location = "#foo", in that both will also create and activate another history entry associated with the current document. But pushState() has a few advantages:
history.pushState({}, null, newUrlIS);
You can check out the root: https://developer.mozilla.org/en-US/docs/Web/API/History_API
This code works for me. I used it into my application in ajax.
history.pushState({ foo: 'bar' }, '', '/bank');
Once a page load into an ID using ajax, It does change the browser url automatically without reloading the page.
This is ajax function bellow.
function showData(){
$.ajax({
type: "POST",
url: "Bank.php",
data: {},
success: function(html){
$("#viewpage").html(html).show();
$("#viewpage").css("margin-left","0px");
}
});
}
Example: From any page or controller like "Dashboard", When I click on the bank, it loads bank list using the ajax code without reloading the page. At this time, browser URL will not be changed.
history.pushState({ foo: 'bar' }, '', '/bank');
But when I use this code into the ajax, it change the browser url without reloading the page.
This is the full ajax code here in the bellow.
function showData(){
$.ajax({
type: "POST",
url: "Bank.php",
data: {},
success: function(html){
$("#viewpage").html(html).show();
$("#viewpage").css("margin-left","0px");
history.pushState({ foo: 'bar' }, '', '/bank');
}
});
}
This is all you will need to navigate without reload
// add setting without reload
location.hash = "setting";
// if url change with hash do somthing
window.addEventListener('hashchange', () => {
console.log('url hash changed!');
});
// if url change do somthing (dont detect changes with hash)
//window.addEventListener('locationchange', function(){
// console.log('url changed!');
//})
// remove #setting without reload
history.back();
Simply use, it will not reload the page, but just the URL :
$('#form_name').attr('action', '/shop/index.htm').submit();
I have a functional wordpress theme that loads content via ajax. One issue that I'm having though is that when pages are loaded directly the ajax script no longer works. For example the link structure works as follows, while on www.example.com and the about page link is clicked then the link becomes www.example.com/#/about. But when I directly load the standalone page www.example.com/about, the other links clicked from this page turn into www.example.com/about/#/otherlinks. I modified the code a little bit from this tutuorial http://www.deluxeblogtips.com/2010/05/how-to-ajaxify-wordpress-theme.html. Here is my code. Thanks for the help.
jQuery(document).ready(function($) {
var $mainContent = $("#container"),
siteUrl = "http://" + top.location.host.toString(),
url = '';
$(document).delegate("a[href^='"+siteUrl+"']:not([href*=/wp-admin/]):not([href*=/wp-login.php]):not([href$=/feed/]))", "click", function() {
location.hash = this.pathname;
return false;
});
$(window).bind('hashchange', function(){
url = window.location.hash.substring(1);
if (!url) {
return;
}
url = url + " #ajaxContent";
$mainContent.fadeOut(function() {
$mainContent.load(url,function(){
$mainContent.fadeIn();
});
});
});
$(window).trigger('hashchange');
});
The problem you are expressing is not easily solved. There are multiple factors at stake but it boils down to this :
Any changes to a URL will trigger a page reload
Only exception is if only the hash part of the URL changes
As you can tell there is no hash part in the URL www.example.com/about/. Consequently, this part cannot be changed by your script, or else it will trigger page reload.
Knowing about that fact, your script will only change the URL by adding a new hash part or modifying the existing one, while leaving alone the "pathname" part of the URL. And so you get URLs like www.example.com/about/#/otherlinks.
Now, from my point of view there are two ways to solve your problem.
First, there is an API that can modify the whole URL pathame without reload, but it's not available everywhere. Using this solution and falling back to classical page reload for older browser is the cleaner method.
Else, you can force the page reload just once to reset the URL to www.example.com/ and start off from a good basis. Here is the code to do so :
$(document).delegate("a[href^='"+siteUrl+"']:not([href*=/wp-admin/]):not([href*=/wp-login.php]):not([href$=/feed/]))", "click", function() {
location = location.assign('#' + this.pathname);
return false;
});
It should be noted that this script won't work if your site is not at the root of the pathname. So for it to work for www.example.com/mysite/, you will need changes in the regex.
Please let me know how it went.