Below javascript code for adding object to a javascript array. I want to add an object to array when it does not exist, if it already exists object.rValue!= new object.rValue then change old rValue=new rValue, otherwise same rVale. Also save it on array.
The problem is the object populate dynamically.
var arr = [];
$(document).ready(function() {
$(".rating").click(function() {
var idx = $(this).closest('td').index();
var userskill = {
tech : $(this).closest('td').siblings('td.tech').text(),
skill : $('#listTable thead th').eq(idx).text(),
rValue : $(this).val()
}
validate(userskill);
});
});
function validate(userskill) {
}
Try this
arr.forEach(function(elem){
if(elem.rValue==newObj.rValue)
elem.rValue = newObj.rValue;
})
Related
Im using the following code,
jQuery.each(aDataSel, function(index, oData) {
oPushedObject = {};
aSelectedDataSet.push(fnCreateEnt(aProp, oData, oPushedObject));
});
This is aSelectedDataSet values
and this is the values of OData
What I need is that before I do the push is to fill the listTypeGroup & listTypeGroupDescription (with the red arrow ) with values that Are inside the oData -> ListTypeGroupAssigment -> result (listTypeGroup & listTypeGroupDescription) , The index is relevant since I want to add just the value of the index in each iteration (since this code is called inside outer loop and the index determine the current step of the loop) ,How it can be done nicely?
The result contain 100 entries (always) and the a selected data will have 100 entries at the end...
Update :)
Just to be clear In the pic I show the values which is hardcoded for this run but the values can be any values, we just need to find the match between the both objects values...
I mean to find a match between to_ListTypeGroupAssigment in both object (which in this case exist ) and if in oData there is result bigger then one entry start with the matching ...
UPDATE2 - when I try Dave code the following happen for each entry,
This happen in the Jquery.extend line...any idea how to overcome this?
The following hard-coded of Dave:-) work perfect but I need generic code which doesnt refer to specific field name
jQuery.each(aDataSet, function(index, oData) {
oPushedObject = {};
fnCreatePushedEntry(aProperties, oData, oPushedObject);
var result = oData.to_ListTypeGroupAssignment.results[index];
oPushedObject.to_ListTypeGroupAssignment = {
ListTypeGroup: result.ListTypeGroup,
ListTypeGroupDescription: result.ListTypeGroupDescription
};
aSelectedDataSet.push(oPushedObject);
});
Im stuck :(any idea how to proceed here ?what can be wrong with the extend ?
should I use something else ? Im new to jQuery...:)
I think that this happen(in Dave answer) because the oData[key] is contain the results and not the specified key (the keyValue = to_ListTypeGroupAssignment ) which is correct but we need the value inside the object result per index...
var needValuesForMatch = {
ListTypeGroup: 'undefined',
ListTypeGroupDescription: 'undefined',
}
//Just to show that oPushedObject can contain additional values just for simulation
var temp = {
test: 1
};
//------------------This object to_ListTypeGroupAssigment should be filled (in generic way :) ------
var oPushedObject = {
temp: temp,
to_ListTypeGroupAssignment: needValuesForMatch
};
oPushedObject is one instance in aSelectedDataSet
and after the matching I need to do the follwing:
aSelectedDataSet.push(oPushedObject);
Is this what you're after:
OPTION ONE - DEEP CLONE FROM oData TO aSelectedDataSet
aSelectedDataSet.forEach(function(currentObject,index){
for (var childObject in currentObject) {
if (! currentObject.hasOwnProperty(childObject))
continue;
var objectToClone = oData[childObject]['results'][index];
if(objectToClone)
$.extend(true,currentObject[childObject],objectToClone);
}
});
Here is your data in a fiddle with the function applied: https://jsfiddle.net/hyz0s5fe/
OPTION TWO - DEEP CLONE FROM oData ONLY WHERE PROPERTY EXISTS IN aSelectedDataSet
aSelectedDataSet.forEach(function(currentObject,index){
for (var childObject in currentObject) {
if (! currentObject.hasOwnProperty(childObject))
continue;
if(typeof currentObject[childObject] !== 'object')
continue;
for(var grandChildObject in currentObject[childObject]) {
var objectToClone = oData[childObject]['results'][index][grandChildObject];
if(typeof objectToClone === 'object') {
$.extend(true,currentObject[childObject][grandChildObject],objectToClone);
} else {
currentObject[childObject][grandChildObject] = objectToClone;
}
}
}
Fiddle for option 2: https://jsfiddle.net/4rh6tt25/
If I am understanding you correctly this should just be a small change:
jQuery.each(aDataSel, function(index, oData) {
oPushedObject = {};
fnCreateEnt(aProp, oData, oPushObj);
//get all the properties of oData and clone into matching properties of oPushObj
Object.getOwnPropertyNames(oData).forEach(function(key) {
if (oPushObj.hasOwnProperty(key)) {
//oPushObj has a matching property, start creating destination object
oPushObj[key] = {};
var source = oData[key];
var destination = oPushObj[key];
//can safely assume we are copying an object. iterate through source properties
Object.getOwnPropertyNames(source).forEach(function(sourceKey) {
var sourceItem = source[sourceKey];
//handle property differently for arrays
if (Array.isArray(sourceItem)) {
//just copy the array item from the appropriate index
destination[sourceKey] = sourceItem.slice(index, index + 1);
} else {
//use jQuery to make a full clone of sourceItem
destination[sourceKey] = $.extend(true, {}, sourceItem);
}
});
}
});
aSelectedDataSet.push(oPushedObject);
});
It is unclear what exactly your fnCreateEnt() function returns though. I am assuming it is the populated oPushObj but it's not entirely clear from your question.
check array of object to checking condition.conditions are
Array of object is initially is empty.
1.if array is empty,when action occurred,add object to array.
2.if array has object check if it is already exists.if found delete the object from array,otherwise add to array.
i tried below code.
var arr = [];
$(document).ready(function() {
$(".rating").click(function() {
var idx = $(this).closest('td').index();
var userskill = {
tech : $(this).closest('td').siblings('td.tech').text(),
skill : $('#listTable thead th').eq(idx).text(),
rValue : $(this).val()
}
add(userskill);
});
});
function add(userskill) {
var flag = false;
arr.push(userskill);
for(var i in arr){
if((arr[i].tech==userskill.tech)&&(arr[i].skill==userskill.skill)){
arr.splice(i, 1);
}
}
I think Underscore.js could be interesting for your problem. E.g. the isEqual method allows object comparision.
edit:
Code using _.findWhere:
function add(userskill) {
if(!_.findWhere(arr, userskill)) {
arr.push(userskill);
}
}
I have some code I want to put into a JSON object ultimately. But first I want to create a javascript object and within that object add an array of values. Sounds simple enough but my approach seems wrong. First I create a basic object, the set a few fields. Lastly, iterate over a bunch of checkboxes and then, if one is checked at that value to an array.
At the last step I need to add that array to my object (myData) and then JSONify it.
Any ideas how I can do this, seems myData.push(filters); doesn't work...
Note that the object itself is not an array, I want to place an array IN the object.
var myData = new Object();
myData.deviceId = equipId;
myData.dateTo = dateTo
myData.dateFrom = dateFrom;
myData.numResults = $("#numResults").val();
var i=0;
var filters = [];
$('input[type=checkbox]').each(function () {
if (this.checked) {
allData += $(this).val() + ",";
filters[i] = {
filterIds: $(this).val()
};
++i;
}
});
myData.push(filters);
That's not how to add items to an Object, change
myData.push(filters);
to
myData.filters = filters;
Also, maybe change = new Object to = {}. There's no difference, but it's easier to read, because literal notation takes up less space.
Read more about Array.prototype.push
Use push to add elements to the filters array. Use property assignment to add another property to the myData object.
var myData = {
deviceId: equipId,
dateTo: dateTo,
dateFrom: dateFrom,
numResults: $("#numResults").val()
};
var filters = [];
$('input[type=checkbox]').each(function () {
if (this.checked) {
allData += $(this).val() + ",";
filters.push({
filterIds: $(this).val()
});
}
});
myData.filters = filters;
BTW, don't use new Object() to create an object, use {}.
Remove the need for an extra array and i.
var myData = {}
myData.deviceId = equipId;
myData.dateTo = dateTo
myData.dateFrom = dateFrom;
myData.numResults = $("#numResults").val();
myData.filters = [];
$('input[type=checkbox]').each(function () {
if (this.checked) {
allData += $(this).val() + ",";
myData.filters.push({
filterIds: $(this).val()
});
}
});
I'm looping through some HTML form elements on a page like so.
var itemsArray = new Array();
$('input[type="text"].qty').each(function(index) {
if($(this).val()) {
itemsArray[index]['qty'] = $(this).val();
itemsArray[index]['itemPrice'] = $(this).parents('.control-group').find('.itemPrice').val();
itemsArray[index]['itemID'] = $(this).parents('.control-group').find('.itemID').val();
}
});
The index i'm hoping to be 0,1,2,3 etc.. like a regular array. With the sub elements being associative and assigned to various values.
I'm getting this error in the console.
TypeError: itemsArray[index] is undefined
You need to make sure each item in the outer array is initialized before you start using it. Note, I changed to object notation below just for clarity.
$('input[type="text"].qty').each(function(index) {
if($(this).val()) {
itemsArray[index] = {};
itemsArray[index].qty = $(this).val();
itemsArray[index].itemPrice = $(this).parents('.control-group').find('.itemPrice').val();
itemsArray[index].itemID = $(this).parents('.control-group').find('.itemID').val();
}
});
Consider using an array of objects. Arrays in Javascript are not really intended to be used in the way you are (the multidimensional part). Also itemsArray = [] is preferred over new Array().
var itemsArray = [];
$('input[type="text"].qty').each(function(index) {
if($(this).val()) {
itemsArray.push({
qty : $(this).val(),
itemPrice : $(this).parents('.control-group').find('.itemPrice').val(),
itemID : $(this).parents('.control-group').find('.itemID').val()
});
}
});
It means what it says. itemsArray[index] is undefined, and you cannot assign properties on this. Notice that you don't have a "multidimensional array", but just an array of objects. For each new index, you will need to create a new object.
var $this = $(this);
if ($this.val()) {
var $parent = $(this).parents('.control-group'); // .closest() should suffice
itemsArray[index] = {
qty: $this.val(),
itemPrice: $parent.find('.itemPrice').val(),
itemID: $parent.find('.itemID').val()
};
}
I have this JSON
[{"id":7,"serial":"7bc530","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null},
{"id":8,"serial":"4a18d27","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null},
{"id":9,"serial":"f30ef","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null},
{"id":10,"serial":"9e6d","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null},
{"id":11,"serial":"4d8665a3","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null},
{"id":12,"serial":"4fe1457","randomDouble":0.0,"randomDouble2":0.0,"randomDouble3":0.0,"date":1352228474000,"removed":null}]
and I have this JSON
{"computers":[{"id":"7bc530","name":"Dell","description":"Dell"},
{"id":"f30ef","name":"HP","description":"HP"},
{"id":"9e6d","name":"Compaq","description":"Compaq"},
{"id":"4d8665a3","name":"Toshiba","description":"Toshiba"},
{"id":"4fe1457","name":"Asus","description":"Asus"},
{"id":"4a18d27","name":"Acer","description":"Acer"}]}
I want to replace the "serial" element in the first JSON with the "Description" in this one. The reason why I need it in one JSON is that I am using a DataTable and I can only pass one JSON in.
I'm not sure how I can do this in Javascript / JQuery?
You can accomplish this without any jQuery by setting up small function:
(see the demo fiddle)
function replaceSerial (data1, data2) {
var descs = {}, computers = data2['computers'], final = data1;
for (var i = 0; i < computers.length; i++ ) {
descs[computers[i]['id']] = computers[i]['description'];
}
for (var i = 0; i < data1.length; i++) {
final[i]['serial'] = descs[data1[i]['serial']];
}
return final;
}
Then just save your two pieces of JSON into variables and invoke the function:
var json1, json2, mergedJson;
json1 = // DATA IN FIRST JSON;
json2 = // DATA IN SECOND JSON;
mergedJson = replaceSerial (json1, json2);
Assuming your first object is called to and the second object is called from
// Iterate over each entry in to
to.forEach(function(value) {
// In each iteration find elements in from where the id is the same
// as the serial of the current value of to
var description = from.computers.filter(function(element){
if (element.id == value.serial) return true;
});
// Copy description of first found object in the description property of
// the current object
value.description = description[0].description;
// Unset serial?
delete value.serial;
});
DEMO