I am using Google map api v3 to plot markers of location array. My script is
function OnSuccess(response) {
var markers = response.d.split('^^');
var latlng = new google.maps.LatLng(51.474634, -0.195791);
var mapOptions1 = {
zoom: 14,
center: latlng
}
var geocoder = new google.maps.Geocoder();
var infoWindow = new google.maps.InfoWindow();
var map = new google.maps.Map(document.getElementById("map-canvas"), mapOptions1);
for (i = 0; i < markers.length; i++) {
var data = markers[i];
geocoder.geocode({ 'address': data }, function (results, status) {
if (status == google.maps.GeocoderStatus.OK) {
map.setCenter(results[0].geometry.location);
var marker = new google.maps.Marker({
map: map,
position: results[0].geometry.location,
title: data
});
} else {
alert("Geocode was not successful for the following reason: " + status);
}
});
}
(function (marker, data) {
// Attaching a click event to the current marker
google.maps.event.addListener(marker, "click", function (e) {
infoWindow.setContent(data);
infoWindow.open(map, marker);
});
})(marker, data);
}
where markers variable is bringing proper data, my test data is array of 5 elements
The Game Larder, 24 The Parade, Claygate, Surrey,KT10 0NU
24 The Parade, Claygate, Esher, Surrey KT10 0NU
Card Collection, 14 The Parade, Claygate, ESHER, KT10 0NU
16A The Parade, Claygate, ESHER, KT10 0NU
and same is coming into array markers however it is plotting only two markers. What could be wrong here
Solution
I was entering locations which are very close to each other e.g 1 and 2 point which gives same latlong hence mark as one place. I found latlong here. Thanks for answers btw :)
In page.aspx. insert tag <div id="map-canvas" ></div>
view source page.aspx and insert script into it>
var lis_marker = new Array();
for (i = 0; i < markers.length; i++) {
var data = markers[i];
geocoder.geocode({ 'address': data }, function (results, status) {
if (status == google.maps.GeocoderStatus.OK) {
map.setCenter(results[0].geometry.location);
lis_marker[i] = new google.maps.Marker({
map: map,
position: results[0].geometry.location,
title: data
});
} else {
alert("Geocode was not successful for the following reason: " + status);
}
});
}
there are difference with your code:
1: var lis_marker = new Array();
2: lis_marker[i] = new google.maps.Marker({...});
Related
I'm using this code to get the current location of the user through google maps api and i am getting the location in the form of latitude and longitudes and getting the location in LatLng variable.
But after that when I am converting the latitude and longitude to an address then its not working.
if(navigator.geolocation) {
navigator.geolocation.getCurrentPosition(function (p){
var LatLng = new google.maps.LatLng(p.coords.latitude,p.coords.longitude);
alert(LatLng);
alert(p.coords.latitude);
alert(p.coords.longitude);
var mapOptions = {
center: LatLng,
zoom: 13,
mapTypeId: google.maps.MapTypeId.ROADMAP
};
var geocoder = new google.maps.Geocoder();
geocoder.geocode({ 'LatLng': LatLng }, function (results, status){
alert(geocoder);
if (status == google.maps.GeocoderStatus.OK){
if (results[1]){
alert("Location: " + results[1].formatted_address);
}
}
});
Firstly as the commentator Parker told, jsp and java tags are irrelevant for your post. I removed it.
You should do the reverse geocoding. The process of doing the converse, translating a location on the map into a human-readable address, is known as reverse geocoding.
Please refer the below google map url for Reverse Geocoding.
See the below snippet of mapping lat & lan to location,
var latlng = {lat: parseFloat(latlngStr[0]), lng: parseFloat(latlngStr[1])};
geocoder.geocode({'location': latlng}, function(results, status) {
if (status === 'OK') {
if (results[0]) {
map.setZoom(11);
var marker = new google.maps.Marker({
position: latlng,
map: map
});
infowindow.setContent(results[0].formatted_address);
infowindow.open(map, marker);
} else {
window.alert('No results found');
}
} else {
window.alert('Geocoder failed due to: ' + status);
}
Let me know if it helps.
$(document).ready(function() {
var currgeocoder;
//Set geo location of lat and long
navigator.geolocation.getCurrentPosition(function(position, html5Error) {
geo_loc = processGeolocationResult(position);
currLatLong = geo_loc.split(",");
initializeCurrent(currLatLong[0], currLatLong[1]);
});
//Get geo location result
function processGeolocationResult(position) {
html5Lat = position.coords.latitude; //Get latitude
html5Lon = position.coords.longitude; //Get longitude
html5TimeStamp = position.timestamp; //Get timestamp
html5Accuracy = position.coords.accuracy; //Get accuracy in meters
return (html5Lat).toFixed(8) + ", " + (html5Lon).toFixed(8);
}
//Check value is present or not & call google api function
function initializeCurrent(latcurr, longcurr) {
currgeocoder = new google.maps.Geocoder();
console.log(latcurr + "-- ######## --" + longcurr);
if (latcurr != '' && longcurr != '') {
var myLatlng = new google.maps.LatLng(latcurr, longcurr);
return getCurrentAddress(myLatlng);
}
}
//Get current address
function getCurrentAddress(location) {
currgeocoder.geocode({
'location': location
}, function(results, status) {
if (status == google.maps.GeocoderStatus.OK) {
console.log(results[0]);
$("#address").html(results[0].formatted_address);
} else {
alert('Geocode was not successful for the following reason: ' + status);
}
});
}
});
</script>
I want to use google map but only at the country level i.e i want to show whole world map in single window and user should be able to select any country on clicking of the country , also i should be able to show some popups .I also want to get the value of country selected from JS. Please guide me on this. I did google on this but no complete info.
Combine these two examples:
Zoom to country
clickable world map
click to zoom to country
var map=null;
var geocoder = null;
var kmlLayer = null;
var infoWindow = new google.maps.InfoWindow(); // InfoWindow
function openIW(layerEvt) {
if (layerEvt.row) {
var content = layerEvt.row['admin'].value;
} else if (layerEvt.featureData) {
var content = layerEvt.featureData.name;
}
document.getElementById('info').innerHTML = "you clicked on:<br>"+content;
findAddress(content);
}
function initialize() {
geocoder = new google.maps.Geocoder();
var chicago = new google.maps.LatLng(36.4278,-15.9);
var myOptions = {
zoom: 2,
center: chicago,
mapTypeId: google.maps.MapTypeId.ROADMAP
}
map = new google.maps.Map(document.getElementById("map_canvas"), myOptions);
google.maps.event.addListener(map, "click", function() {
document.getElementById('info').innerHTML = "";
});
kmlLayer = new google.maps.KmlLayer('http://www.geocodezip.com/geoxml3_test/world_countries_kml.xml', {preserveViewport: true, suppressInfoWindows: true} );
kmlLayer.setMap(map);
google.maps.event.addListener(kmlLayer, 'click', openIW);
}
function findAddress(address) {
if ((address != '') && geocoder) {
geocoder.geocode( { 'address': address}, function(results, status) {
if (status == google.maps.GeocoderStatus.OK) {
if (results && results[0] && results[0].geometry && results[0].geometry.viewport)
map.fitBounds(results[0].geometry.viewport);
} else {
alert("No results found");
}
} else {
alert("Geocode was not successful for the following reason: " + status);
}
});
}
}
I'm trying to remove a marker on my map based on it's address but it's not working for some reason. It must be something obvious that i'm not seeing. It's not going into the if(m==locationsall[i][0]) in the deleteMarker method even though i've ensured that m and locationsall[i][0] are identical.
//alert(tmp);
//alert(locationsall[0][0]);
Adding to map code:
$('#map').show();
var geocoder = new google.maps.Geocoder();
var address = document.getElementById("address").value +", " + document.getElementById("city").value;
geocoder.geocode( { 'address': address}, function(results, status) {
if (status == google.maps.GeocoderStatus.OK) {
var lat = results[0].geometry.location.lat();
var lng = results[0].geometry.location.lng();
locationsall[counter] = new Array();
locationsall[counter][0] = address;
locationsall[counter][1] = lat;
locationsall[counter][2] = lng;
var mapOptions = {
zoom: 13,
center: new google.maps.LatLng(lat, lng),
mapTypeId: google.maps.MapTypeId.ROADMAP
}
map = new google.maps.Map(document.getElementById("map_canvas"), mapOptions);
var i;
for (i = 0; i < locationsall.length; i++) {
locationsall[i][3] = marker = new google.maps.Marker({
position: new google.maps.LatLng(locationsall[i][1], locationsall[i][2]),
map: map
});
//markersArray.push(marker);
}
counter++;
} else {
alert("Geocode was not successful for the following reason: " + status);
}
});
}
Code that retrieves the address from a textbox and formats it to '1 main street, city'
var tmp = locations.splice(locations.indexOf(location), 1);
deleteMarker(tmp);
Delete marker code:
function deleteMarker(m){
for (i = 0; i < locationsall.length; i++) {
if(m==locationsall[i][0]){
alert(locationsall[i][0]);
alert(locationsall[i][3]);
locationsall[i][3].setMap(null);
}
}
}
Turns out I had an extra space when I compared m and locationsall[i][0];
The code works perfectly now.
Here is the code:
<script type="text/javascript">
var offender_locations = [
["10010", "xxxxx", 3],
["10001", "xxxxx", 2],
["10002", "zzzzz", 1]
];
for (i = 0; i < offender_locations.length; i++) {
var address = offender_locations[i][0];
var icon_img = offender_locations[i][1];
}
</script>
This is the output:
1) 10010 - zzzzz
2) 10001 - zzzzz
3) 10002 - zzzzz
AS you can see var address outputs the correct value, but *var icon_img* does always repeat the same value.
I am a Javascript beginner and I have tried all ways I can think of but I still get the same results.
P.S. I have pasted the full script here :
<script type="text/javascript">
var offender_locations = [
["10010", "offender_icon.png", 3],
["10001", "offender_icon.png", 2],
["10002", "visitor_icon.png", 1]
];
var myOptions = {
zoom: 10,
center: latlng,
mapTypeId: google.maps.MapTypeId.ROADMAP
};
var map = new google.maps.Map(document.getElementById("map"), myOptions);
var latlng = new google.maps.LatLng(0, 0);
for (i = 0; i < offender_locations.length; i++) {
var infowindow = new google.maps.InfoWindow();
var geocoder_map = new google.maps.Geocoder();
var address = offender_locations[i][0];
var icon_img = offender_locations[i][1];
geocoder_map.geocode({
'address': address
}, function (results, status) {
if (status == google.maps.GeocoderStatus.OK) {
map.setCenter(results[0].geometry.location);
var marker = new google.maps.Marker({
map: map,
position: map.getCenter(),
icon: icon_img
});
google.maps.event.addListener(marker, 'click', (function (marker, i) {
return function () {
infowindow.setContent(offender_locations[i][0]);
infowindow.open(map, marker);
}
})(marker, i));
} else {
alert("The requested offender is not mappable !")
};
});
}
</script>
The markers in this script are all # the correct postal code, but they all show the same icon (visitor_icon.png) !
The problem is that you are creating a function in a loop. JavaScript has only function scope, not block scope. I.e. variables you create in a loop exist only once in the whole function, just the values changes per iteration.
At the time icon_img is evaluated (in the callback passed to geocode), the outer for loop already finished and icon_img has the value of the last iteration. It works for address because it is evaluated inside the loop, not later.
You have to 'capture' the current value of icon_img and you can do so by using an immediate function:
for (i = 0; i < offender_locations.length; i++) {
var infowindow = new google.maps.InfoWindow(),
geocoder_map = new google.maps.Geocoder(),
address = offender_locations[i][0],
icon_img = offender_locations[i][1];
(function(addr, img) { // <-- immediate function call
geocoder_map.geocode({'address': addr}, function(results, status) {
if (status == google.maps.GeocoderStatus.OK) {
map.setCenter(results[0].geometry.location);
var marker = new google.maps.Marker({
map: map,
position: map.getCenter(),
icon: img
});
google.maps.event.addListener(marker, 'click', function() {
infowindow.setContent(addr);
infowindow.open(map, marker);
});
} else {
alert("The requested offender is not mappable !");
}
});
}(address, icon_img)); // <-- immediate function call
}
Maybe you hav to do this for even more variables... not sure.
I'm sure this is really simple but I haven't had much luck figuring out what's wrong. I'm creating an empty array (locations), filling it with location objects in the getPartnerLocations function and then trying to plot the locations on the map with the drop function. The problem I'm having is that inside the drop function the locations array which has stuff in it is returning a length of zero so the loop in the isn't working. Any tips or ideas about what's going on here would be greatly appreciated.
var markers = [];
var locations = [];
var iterator = 0;
var map;
var geocoder;
var newYork = new google.maps.LatLng(40.7143528, -74.0059731);
function initialize() {
var mapOptions = {
zoom: 12,
mapTypeId: google.maps.MapTypeId.ROADMAP,
center: newYork
};
map = new google.maps.Map(document.getElementById("map_canvas"),mapOptions);
}
function getPartnerLocations() {
geocoder = new google.maps.Geocoder();
$('.partner').each(function(index){
var street = $('.partner-streetaddress',this).text();
var city = $('.partner-city',this).text();
var state = $('.partner-state',this).text();
var country = $('.partner-country',this).text();
var address = street + ', ' + city + ', ' + state + ', ' + country;
geocoder.geocode( { 'address': address}, function(results, status)
{
if (status == google.maps.GeocoderStatus.OK)
{
locations.push( results[0].geometry.location );
console.log(locations[index]);
}
else
{
console.log('failed to geocode address: ' + address);
}
});
});
initialize();
drop();
}
function addMarker() {
console.log('add marker function');
markers.push(new google.maps.Marker({
position: locations[iterator],
map: map,
draggable: false,
animation: google.maps.Animation.DROP
}));
iterator++;
}
function drop()
{
console.log(locations.length);
for (var i = 0; i < locations.length; i++) {
setTimeout(function() {
addMarker();
}, i * 200);
}
}
getPartnerLocations();
geocode is an asynchronous function.
The callback doesn't execute until some time after you call drop.
Therefore, when you call drop, the array is still empty.
You need to call initialize and drop after the last AJAX call replies, in the geocode callback.