i've been looking for this for a couple of days but still no joy!
I would like to have a div scroll in a fixed position until it gets to the top of the footer.
Here is a fiddle of what i have so far: http://jsfiddle.net/danieljoseph/uk4mC/
I'm using this JQuery code but this uses pixels to determine when the div stops. I would like to use the top of the footer as the stop point:
$(document).scroll(function() {
var scrollVal = $(document).scrollTop();
$('#floating-container').css('top',scrollVal+'px');
if (scrollVal < 50) {
$('#floating-container').css('top','50px');
}
if (scrollVal > 2347) {
$('#floating-container').css('top','2347px');
}
});
The issue is that i am using a CMS and the client will be adding text to the page so the second value will change depending on what they add.
I hope i've been clear enough! please let me know if you require more details.
Thanks,
You have to check in the scroll event if the bottom edge of your div is lower than the footer. If it is, place the div at the position of the footer minus the height of the div.
$(function(){
var container = $('#floating-container');
var minTop = $('header').outerHeight();
var maxTop = $('footer').offset().top - container.outerHeight();
$(document).scroll(function() {
var scrollVal = $(document).scrollTop();
container.css('top', scrollVal);
if (scrollVal < minTop) {
container.css('top', minTop);
}
if (container.offset().top > maxTop ) {
container.css('top', maxTop );
}
});
});
Fiddle
And, a much shorter variant of the script above:
$(function(){
var container = $('#floating-container');
var minTop = $('header').outerHeight();
var maxTop = $('footer').offset().top - container.outerHeight();
$(document).scroll(function() {
container.css('top', Math.min( Math.max(minTop, $(document).scrollTop()), maxTop ));
});
});
Short version fiddle.
Just read the position of the footers top when you load the page:
http://jsfiddle.net/uk4mC/1/
var footerTop = $('#text-block').position().top;
and then use that as a trigger:
if (scrollVal < footerTop) { }
Related
I'm currently making an overlay that covers a sticky top bar when the user has scrolled beyond a certain point (down) and disappears when scrolling back up. However, I'd like to be able to scroll for at least 50px before the code is executed (something like a gap before the overlay is triggered).
$(function() {
var prevScroll = $(document).scrollTop(); //initial position
$(window).scroll(function() {
var newScroll = $(document).scrollTop(); //position from top after scrolling
if(newScroll > prevScroll) { // checks if the user has scrolled up or down
var fromNew = $(document).scrollTop(); // holds value to compare with the position + gap amount
if (fromNew > newScroll + 50) { //checks to see if scrolled for 50px
$("#stick-start").fadeIn("fast");
prevScroll = newScroll + 50; //initial position + scrolled amount
};
} else {
var fromNew = $(document).scrollTop();
if (fromNew > newScroll - 50) {
if ($("#stick-start").hasClass("is-stuck")) {
$("#stick-start").fadeOut("fast");
prevScroll = newScroll - 50;
};
};
};
});
});
The condition that checks whether you're scrolling up or down works. But as it is now, the overlay just keeps fading in and out repeatedly. How do I make it so that you have to scroll at least 50px before anything happens ?
I think this should get you where you're going.
var $document = $(document);
$(window).scroll(function() {
if ($document.scrollTop() >= 50) {
$("#stick-start").fadeIn("fast");
} else {
$("#stick-start").fadeOut("fast");
}
});
EDIT: had an error, should be good now.
$(window).scroll(function() {
if ($(this).scrollTop() >= 50) {
$("#stick-start").fadeIn();
} else {
$("#stick-start").fadeOut();
}
});
I have huge sidebar element and when the page is scrolled sidebar point to the current element that is in a viewport. But sometimes active element is out of sidebar visible space i.e below or above borders. And then the user needs to scroll manually to be able to see active element.
I want to try use logic for determining if the active element is out sidebar visible space and auto scroll if needed.
$(window).on('scroll', function () {
var scrollTop = $(this).scrollTop();
var container = $('#sectionMenu');
var containerHeight = container.height();
$(data).each(function () {
var topDistance = $(this).offset().top - 250;
var id = $(this).attr('id');
var elem = $('#_' + id);
if ((topDistance) < scrollTop && (topDistance + $(this).height() * 0.95) > scrollTop) {
if (autoScrollFlag) {
if (!elem.hasClass('sideBarActive')) {
var scrollPosition = elem.offset().top - container.offset().top;
removeActiveMenuItems(data);
elem.addClass('sideBarActive');
if (containerHeight < scrollPosition) {
// TODO automated scroll
}
}
}
autoScrollFlag = 1;
}
});
});
The solution that has worked for me was like this.
if (containerHeight < scrollPosition) {
container.animate({
scrollTop: '+=100px'
}, 800);
}
I want to stop scroll after a dynamic div reaches its end. This div will be holding dynamic content so the size never stays the same. I know how to lock in position when scroll hits a pre-defined height, but not sure how to do it when the hight is constantly changing. here's what i'm using for my standard locking scroll when it hits specific point:
var profile_rc = $("#profile-rc");
$(window).scroll(function() {
var scroll = $(window).scrollTop();
if (scroll >= 285) {
profile_rc.addClass("p-right-column");
} else {
profile_rc.removeClass("p-right-column");
}
});
Looks like you are using jQuery, the following 2 examples might help.
Detecting dynamic height of screen
<script>
$(function(){
var windowHeight = $(window).height();
$(window).resize(function() {
windowHeight = $(window).height();
console.log(windowHeight);
});
});
<script>
Detecting dynamic height of a div
<script>
$(function(){
var divHeight = $('#your-div-id').css("height");
$( window ).on("resize", function() {
divHeight = $('#your-div-id').css("height");
console.log(divHeight);
});
});
</script>
I got it to work doing this:
$(window).scroll(function() {
var divHeight = $('#farleft-cont').outerheight(true);
var ycbc = $('#target-div');
var scroll = $(window).scrollTop();
if (scroll >= divHeight) {
ycbc.addClass("target-div-fixed");
} else {
ycbc.removeClass("target-div-fixed");
}
});
I want scroll page content on mouse scroll.
I have 5 images in page, at a time i want to show one image per screen.
If i scroll down second image showed be shown, if i scroll up previous image should be shown. Like wise until the last image.I have tried an example but have no idea how achieve this.
JavaScript:
var winHeight = $(window).height();
var prevHeight = 0;
var scrollCount = 0;
var docHeight = $(document).height();
$(document).ready(function(){
$(window).scroll(function(e){
console.log("in scroll top");
var top = $(window).scrollTop();
console.log("top - "+top);
if(top !=0 && top != docHeight){
if(top > prevHeight){
scrollCount = scrollCount+1;
}else{
scrollCount = scrollCount-1;
}
console.log("scroll count="+scrollCount);
$(window).scrollTop(winHeight*scrollCount);
prevHeight = top;
if(scrollCount < 0){
scrollCount = 0;
}
e.preventDefault();
}
});
My example is here http://jsbin.com/iwOsiFIY/1/
Just set the margins to what you want them to be for each image in CSS. Or a workaround is adding a bunch of "p" tags in HTML without actually adding a paragraph, The first way is the best. You might also need some JavaScript for resizing.
I am trying to make a navigation, that sets the "active" class to links whenever it scrolls a specified ammount of pixels. But there is a div on the page, that get's its size based on user interaction.
This is the code for setting the active class.
$(function() {
//caches a jQuery object containing the header element
var header = $(".active");
$(window).scroll(function() {
var scroll = $(window).scrollTop();
if (scroll >=760) {
header.removeClass('active').addClass("active1");
}
else { header.removeClass('active1').addClass('active');}
});
var header1 = $("#work");
$(window).scroll(function() {
var scroll = $(window).scrollTop();
if (scroll >= 759 && scroll < 780) {
header1.removeClass('#work').addClass("active");
} else {
header1.removeClass("active").addClass('#work');
}
});
var header2 = $("#about");
$(window).scroll(function() {
var scroll = $(window).scrollTop();
if (scroll > 779 && scroll < 1450) {
header2.removeClass('#about').addClass("active");
} else {
header2.removeClass("active").addClass('#about');
}
});
var header3 = $("#contact");
$(window).scroll(function() {
var scroll = $(window).scrollTop();
if (scroll > 1449) {
header3.removeClass('#contact').addClass("active");
} else {
header3.removeClass("active").addClass('#contact');
}
});
});
How do I get the height of a div which has it's class set as auto, and then apply it in the code above ?
EDIT: I tried the $('#ID').height(); but it gets the height when the website is loaded, and it doesn't work after any user interacts with the div.
In basically get the height of the DIV
$('#ID').height();
it returns height.
I guess this is what you are looking for
Sample DEMO
if($("#ID").offset().top < $(window).scrollTop() + $(window).outerHeight())
If you create a fiddle possibly can do the same for you
Hope this helps, Thank you