I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
Is there a way to get all elements that have a certain event listener attached to them?
I know I can get them if the event listener is defined as an attribute:
var allElemsInBodyWithOnclickAttr = $("body").find("*[onclick]");
But I have elements that have event listeners that are attached by code and thus have no onclick attribute.
So when I do (for example) this:
$("a").on("click", function(evt) {
alert("Hello");
});
..then using the code below doesn't fire the click on those anchor elements:
$("a[onclick]").trigger("click");
I guess I could loop through all the elements and check if they have the listener I'm looking for (using this SO question) but I can't imagine that's going to perform very well..
Can't add comments, but still - consider using https://github.com/ftlabs/fastclick for removing the delay.
That helped me, when i was developing app using cordova.
Also, didn't notice you have already mentioned this post, so i have written implementation for 'loop through all elements'-type-of-solution
Array.prototype.reduce.call(
$('body').children(),
(answer, node) => {
if (typeof $._data($(node)[0], 'events') != 'undefined') {
answer.push(node);
}
return answer;
},
[]
);
I think this is not possible, since it is not possible to test if a single element has an event listener attached to it.
Look here
So the only way to do that is to manage a map which contains a reference to each event handler for each event for each element.
Edit
With respect to the answer of #Ivan Shmidt, I must correct my answer: Obviously It seams to be possible with jQuery. That is because jQuery is holding a reference of attached event handlers, BUT events attached using good old .addEventListener() would bypass this and also not be found this way.
I want to overwrite event handler for click event. This is the event handler I have attached initially.
document.querySelector("[data-id='start-btn']")
.addEventListener("click", function (evt) {
//some code
});
Again after some condition, I want to over write this handler and attach new for 'click' event.
//removing
document.querySelector("[data-id='start-btn']")
.removeEventListener("click", function (evt) {
//some code
}, false);
//attaching new
document.querySelector("[data-id='start-btn']")
.addEventListener("click", function (evt) {
//code
});
But still it is executing the previous event handler.I have used removeEventListener(but I guess, its not working).
Guide me where I am going wrong.
The only way to remove a handler added with addEventListener is to use removeEventListener with exactly the same arguments. That means you'll need a reference to the original function:
var handler = function (evt) {
//some code
};
document.querySelector("[data-id='start-btn']").addEventListener("click", handler);
then to remove
document.querySelector("[data-id='start-btn']").removeEventListener("click", handler);
removeEventListener makes sense really only when using function references rather than passing an entire function body to both it and addEventListener, which would potentially mean mass duplication of code (and, as you've found, doesn't work anyway.)
So, prepare a reference to your function:
function my_func() { /* code */ }
And pass it as the handler argument to add/removeEventListener
document.querySelector('query').addEventListener('click', my_func);
document.querySelector('query').removeEventListener('click', my_func);
There is an easier way that utilises an older coding standard. If you specifically want only one event handler for a given type and element, you can use the DOM-zero onclick.
document.querySelector('query').onClick = my_func;
document.querySelector('query').onClick = my_func2; /* my_func() will no longer fire */
As you can see from some other answers, removing an event listener can be kind of a nightmare. Thankfully in certain circumstances there is an easier way: add another event listener that fires earlier and cancels out the rest.
In my case there was a click event handler I wanted to override and I was able to add another event handler with useCapture=true (among other things) to override it.
document.body.addEventListener('click',function (e) {
if (e.target.innerHTML.toLowerCase() == 'regular') {
e.target.insertAdjacentHTML('afterend','<div>One we do <strong>not want</strong></div>');
e.preventDefault();
}
});
document.body.addEventListener('click',function (e) {
if (e.target.innerHTML.toLowerCase() == 'fixed') {//or any event or other pre-/evaluations/conditions here
e.target.insertAdjacentHTML('afterend','<div>One we <strong>do want</strong></div>');
e.preventDefault();
e.stopPropagation();
}
//document.querySelector('.somethingelse').click();//etc.
},true);
<div>Regular</div>
<div>Fixed</div>
I was building a chrome extension and for some reason removeEventListener was not working as expected. The solution I came up with was to use the cloneNode method.
The documentation says
Cloning a node copies all of its attributes and their values,
including intrinsic (inline) listeners. It does not copy event
listeners added using addEventListener() or those assigned to element
properties.
What I did was created a clone for my actual element and replaced it with the cloned one. This removes all event listeners from the element. A simple example will be like
let newClonedElem = myActualElem.cloneNode(true);
myActualElem.parentNode.replaceChild(newClonedElem, myActualElem);
var links = document.body.querySelectorAll("p.sourcelinks a.individual_source_link");
for(var i=0;i<links.length;i++)
{
links[i].onclick = null;
}
Is my current code, however it doesn't remove the onclick events. I have no idea what they will be since this is a greasemonkey script.
Your code only deals with events added by element.onclick case. What about events added with addEventListener (for standards compliant browsers) and attachEvent (for IE)?
You need to use removeEventListener and detachEvent to remove events as well as setting .onclick to null. Then all your bases will be covered.
This article would probably be useful:
http://www.computerhowtoguy.com/how-to-use-the-jquery-unbind-method-on-all-child-elements/
One part in particular is a recursive function that removes all click events. Remember that jQuery will remove click events IF the click event was created using jQuery. the function given in the article will remove both those created with jQuery and those that were not. The function given is this:
function RecursiveUnbind($jElement) {
// remove this element's and all of its children's click events
$jElement.unbind();
$jElement.removeAttr('onclick');
$jElement.children().each(function () {
RecursiveUnbind($(this));
});
}
You would call the function like this:
RecursiveUnbind($('#container'));
That function takes a jQuery object parameter, but you could easily change it up to pass a string as the name of the ID for the element, or however you think is best.
While this only addresses click events you could easily modify it to handle others or all.
That code doesn't work because of GM's sandbox. links is in an XPCNativeWrapper.
To get around this use setAttribute(), like so:
var links = document.body.querySelectorAll("p.sourcelinks a.individual_source_link");
for(var i=0;i<links.length;i++)
{
links[i].setAttribute ("onclick", null);
}
Note that click handlers that are set other ways, will need to be cleared other ways (removeEventListener(), for example).
Array.from(document.all).forEach(el=>{
el.onselectstart=null
el.oncontextmenu=null
document.oncontextmenu=null
})
here is the solution
Right click and select event bypassed
I am guessing you have either an href or a JavaScript function being called on the onClick for an <a> link.
You can remove either of these by removing the href tag, the onClick event or in this case both of them.
for(var i=0;i<links.length;i++)
{
links[i].href='#';
links[i].onclick = '';
}
I have a site that uses AJAX to navigate. I have two pages that I use a click and drag feature using:
$(".myDragArea").mousedown(function(){
do stuff...
mouseDrag = true; // mouseDrag is global.
});
$("body").mousemove(function(){
if (mouseDrag) {
do stuff...
}
});
$("body").mouseup(function(){
if (mouseDrag) {
do stuff...
mouseDrag = false;
}
});
I just type that out, so excuse any incidental syntax errors. Two parts of the site use almost identical code, with the only difference being what is inside the $("body").mouseup() function. However, if I access the first part, then navigate to the second part, the code that runs on mouseup doesn't change. I have stepped through the code with Firebug, and no errors or thrown when $("body").mouseup() is run when the second part loads.
So, why doesn't the event handler change when I run $("body").mouseup() the second time?
Using $("body").mouseup( ... ) will add an event handler for the body that is triggered at mouseup.
If you want to add another event handler that would conflict with current event handler(s) then you must first remove the current conflicting event handler(s).
You have 4 options to do this with .unbind(). I'll list them from the least precise to the most precise options:
Nuclear option - Remove all event handlers from the body
$("body").unbind();
This is pretty crude. Let's try to improve.
The elephant gun - Remove all mouseup event handlers from the body
$("body").unbind('mouseup');
This is a little better, but we can still be more precise.
The surgeon's scalpel - Remove one specific event handler from the body
$("body").unbind('mouseup', myMouseUpV1);
Of course for this version you must set a variable to your event handler. In your case this would look something like:
myMouseUpV1 = function(){
if (mouseDrag) {
do stuff...
mouseDrag = false;
}
}
$("body").mouseup(myMouseUpV1);
$("body").unbind('mouseup', myMouseUpV1);
$("body").mouseup(myMouseUpV2); // where you've defined V2 somewhere
Scalpel with anesthesia (ok, the analogy's wearing thin) - You can create namespaces for the event handlers you bind and unbind. You can use this technique to bind and unbind either anonymous functions or references to functions. For namespaces, you have to use the .bind() method directly instead of one of the shortcuts ( like .mouseover() ).
To create a namespace:
$("body").bind('mouseup.mySpace', function() { ... });
or
$("body").bind('mouseup.mySpace', myHandler);
Then to unbind either of the previous examples, you would use:
$("body").unbind('mouseup.mySpace');
You can unbind multiple namespaced handlers at once by chaining them:
$("body").unbind('mouseup.mySpace1.mySpace2.yourSpace');
Finally, you can unbind all event handlers in a namespace irrespective of the event type!
$("body").unbind('.mySpace')
You cannot do this with a simple reference to a handler. $("body").unbind(myHandler) will not work, since with a simple reference to a handler you must specify the event type ( $("body").unbind('mouseup', myHandler) )!
PS: You can also unbind an event from within itself using .unbind(event). This could be useful if you want to trigger an event handler only a limited number of times.
var timesClicked = 0;
$('input').bind('click', function(event) {
alert('Moar Cheezburgerz!');
timesClicked++;
if (timesClicked >= 2) {
$('input').unbind(event);
$('input').val("NO MOAR!");
}
});
Calling $("body").mouseup(function) will add an event handler.
You need to remove the existing handler by writing $("body").unbind('mouseup');.
jQUery doesn't "replace" event handlers when you wire up handlers.
If you're using Ajax to navigate, and not refreshing the overall DOM (i.e. not creating an entirely new body element on each request), then executing a new line like:
$("body").mouseup(function(){
is just going to add an additional handler. Your first handler will still exist.
You'll need to specifically remove any handlers by calling
$("body").unbind("mouseUp");